https://www.ovgu.de/search

Publikationen

2017

Buchbeitrag
Kannengießer, Thomas;  Kromm, Arne;  Launert, Benjamin;  Dixneit, Jonny;  Rhode, Sabine;  Pasternak, Hartmut 

Combining sectioning method and x ray diffraction for evaluation of residual stresses in welded high strength steel components
In: Residual stresses 2016: ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 - Millersville, PA, USA: Materials Research Forum LLC, S. 163-168, 2017; http://dx.doi.org/10.21741/9781945291173-28 ; [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]

Kannengießer, Thomas;  Dixneit, Jonny;  Kromm, Arne;  Boin, Mirko;  Gubmeier, Jenz 

Influence of heat control on residual stresses in low transformation temperature (LTT) large scale welds
In: Residual stresses 2016: ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 - Millersville, PA, USA: Materials Research Forum LLC, S. 223-228, 2017; http://dx.doi.org/10.21741/9781945291173-38 ; [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]

Kannengießer, Thomas;  Schröpfer, Dirk;  Kromm, Arne;  Flohr, Kerstin 

Influence of weld repair by gouging on the residual stresses in high strength steels
In: Residual stresses 2016: ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 - Millersville, PA, USA: Materials Research Forum LLC, S. 169-174, 2017; http://dx.doi.org/10.21741/9781945291173-29 ; [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]

Kannengießer, Thomas;  Launert, Benjamin;  Rhode, Michael;  Kromm, Arne;  Pasternak, Hartmut 

Residual stress influence on the flexural buckling of welded I-girders
In: Residual stresses 2016: ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 - Millersville, PA, USA: Materials Research Forum LLC, S. 109-114, 2017; http://dx.doi.org/10.21741/9781945291173-19 ; [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]

Dissertation
Schröpfer, Dirk;  Kannengießer, Thomas [AkademischeR BetreuerIn] 

Adaptierte Wärmeführung zur Optimierung schweißbedingter Beanspruchungen und Eigenschaften höherfester Verbindungen
In: Aachen Shaker Verlag 2017, xxv, 239 Seiten, 64 Illustrationen, Diagramme, 21 cm, 395 g - (Berichte aus der Werkstofftechnik), ISBN 978-3-8440-5406-4 ; [Literaturverzeichnis: Seite 199-213]

2016

Begutachteter Zeitschriftenartikel
Zhang, Lei;  Kannengiesser, Thomas 

HAZ softening in Nb-, Ti- and Ti + V-bearing quenched and tempered steel welds
In: Welding in the World, 2016, S. 177-184, ISSN 0043-2288, 10.1007/s40194-016-0299-7

Rhode, Michael;  Steger, Joerg;  Böllinghaus, Thomas;  Kannengießer, Thomas 

Hydrogen degradation effects on mechanical properties in T24 weld microstructures
In: Welding in the world : the international journal of materials joining. - Heidelberg : Springer, Bd. 60.2016, 2, S. 201-216

Publikationslink   

Dixneit, J.;  Kromm, A.;  Hannemann, Andreas;  Friedersdorf, P.;  Kannengießer, Thomas;  Gibmeier, J. 

In-situ load analysis in multi-run welding using LTT filler materials
In: Welding in the world : the international journal of materials joining. - Heidelberg : Springer, Bd. 60.2016, 6, S. 1159-1168

Publikationslink   

Boateng, F. T.;  Ewert, U.;  Kannengiesser, T.;  Zscherpel, U.;  Griesche, A.;  Kromm, A.;  Hohendorf, S.;  Redmer, B. 

Real-time radiography for observation of crack growth during GTA welding
In: Welding in the World, 2016, S. , ISSN 0043-2288, 10.1007/s40194-016-0351-7

Schroepfer, Dirk;  Kannengiesser, Thomas 

Stress build-up in HSLA steel welds due to material behaviour
In: Journal of Materials Processing Technology, 2016, S. 49-58, ISSN 09240136, 10.1016/j.jmatprotec.2015.08.003

2015

Artikel in Kongressband
Schroepfer, Dirk.;  Kannengiesser, Thomas 

Influence oft he thermal cycle on residual stress evolution and cold cracking restistance in welded high-strength steel constructions
In: Proceedings of 2nd ESTAD European Steel Technology and Application Days, Duesseldorf, 15.6.-19.6.2015

Kannengiesser, Thomas;  McInerny, Tim;  Florian, Wolfgang;  Boellinghaus, Thomas;  Cross, Carl Edward 

The Influence of local weld deformation on hot cracking susceptibility
In: Mathematical Modelling of Weld Phenomena 6, Seggau, 2002, S.803-818

Begutachteter Zeitschriftenartikel
Griesche, A.;  Dabah, E.;  Kannengiesser, T.;  Hilger, A.;  Kardjilov, N.;  Manke, I.;  Schillinger, B. 

Measuring Hydrogen Distributions in Iron and Steel Using Neutrons
In: Physics Procedia, 2015, S. 445-450, ISSN 18753892, 10.1016/j.phpro.2015.07.062

Schasse, R.;  Kannengiesser, Th.;  Kromm, A.;  Mente, T. 

Residual stresses in repair welds of high-strength low-alloy steels
In: Welding in the World, 2015, S. 757-765, ISSN 0043-2288, 10.1007/s40194-015-0257-9

Dissertation
Gollnow, Christian;  Kannengießer, Thomas 

Beitrag zur Ermittlung vorrangig konstruktiver Einflussgrößen auf die Heißrissinitiierung an geschweißten Bauteilen
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015; Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM); XIII, 169 S.: Ill., graph. Darst. - (BAM-Dissertationsreihe; 139), ISBN 978-3-9817502-0-1

Originalartikel in begutachteter internationaler Zeitschrift
Schröpfer, Dirk;  Kannengießer, Thomas 

Schweißbedingte Beanspruchungen an hochfesten Bauteilen - Eine Frage der Wärmeführung
In: Der Praktiker, Düsseldorf, 2015, S.470-475

Schröpfer, Dirk;  Kannengießer, Thomas 

Schweißbedingte Beanspruchungen beim Einsatz modifizierter Sprühlichtbogenprozesse in hochfesten Feinkornbaustählen
In: DVS-Berichte, Düsseldorf, DVS Media GmbH, ISBN 9783-945023-48-4, S. 683-688

Originalartikel in begutachteter nationaler Zeitschrift
Schröpfer, Dirk;  Kannengießer. Thomas 

Effekt der Wärmeführung auf schweißbedingte Beanspruchungen in Bauteilen aus hochfestem Feinkornbaustahl
In: Schweißen und Schneiden, Band 66, Heft 8, ISSN 0036-7184; Seiten 434-441

2014

Begutachteter Zeitschriftenartikel
Zhang, Lei;  Kannengießer, Thomas 

Austenite grain growth and microstructure control in simulated heat affected zones of microalloyed HSLA steel
In: Materials science and engineering / A. - Amsterdam : Elsevier, Bd. 613.2014, S. 326-335

Publikationslink   

Schroepfer, D.;  Kannengiesser, T. 

Correlating welding reaction stresses and weld process conditions for high-strength steel S960QL
In: Welding in the World, Vol. 58, 2014, Issue 3, S. 423-432, ISSN 00432288, 10.1007/s40194-014-0127-x

Kromm, A.;  Kannengiesser, T. 

Effect of martensitic phase transformation on stress build-up during multilayer welding
In: Materials Science Forum, Vol. 768-769, 2014, S. 660-667, ISSN 02555476, 10.4028/www.scientific.net/MSF.768-769.660

Kannengiesser, T.;  Boellinghaus, T. 

Hot cracking tests - An overview of present technologies and applications
In: Welding in the World, Vol. 58, 2014, Issue 3, S. 397-421, ISSN 00432288, 10.1007/s40194-014-0126-y

Dabah, E.;  Kannengiesser, T.;  Eliezer, D.;  Boellinghaus, T. 

Hydrogen interaction with residual stresses in steel studied by synchrotron X-ray diffraction
In: Materials Science Forum, Vol. 772, 2014, S. 91-95, ISSN 02555476, 10.4028/www.scientific.net/MSF.772.91

Griesche, Axel;  Dabah, Eitan;  Kardjilov, Nikolay;  Hilger, André;  Manke, Ingo;  Kannengießer, Thomas 

Imaging of hydrogen in steels using neutrons
In: International journal of materials research. - München : Hanser, Bd. 105.2014, 7, S. 640-644

Publikationslink   

Gibmeier, J.;  Held, E.;  Altenkirch, J.;  Kromm, A.;  Kannengießer, Thomas;  Buslaps, Th. 

Real time monitoring of phase transformation and strain evolution in LTT weld filler material using EDXRD
In: Journal of materials processing technology. - Amsterdam [u.a.] : Elsevier, Bd. 214.2014, 11, S. 2739-2747

Publikationslink   

Kromm, Arne;  Dixneit, Jonny;  Kannengießer, Thomas 

Residual stress engineering by low transformation temperature alloys-state of the art and recent developments
In: Welding in the world : the international journal of materials joining. - Heidelberg : Springer, Bd. 58.2014, 5, S. 729-741

Publikationslink   

Gibmeier, J.;  Obelode, E.;  Altenkirch, J.;  Kromm, A.;  Kannengießer, T. 

Residual stress in steel fusion welds joined using low transformation temperature (LTT) filler material
In: Materials Science Forum, Vol. 768-769, 2014, S. 620-627, ISSN 02555476, 10.4028/www.scientific.net/MSF.768-769.620

Kromm, A.;  Kannengießer, T. 

Stress build-up during multilayer welding with novel martensitic filler materials
In: HTM - Journal of Heat Treatment and Materials, Vol. 69, 2014, Issue 2, S. 80-88, ISSN 21941831, 10.3139/105.110210

Brauser, S.;  Kromm, A.;  Dabah, E.;  Kannengiesser, T.;  Rethmeier, M. 

Thermal stability of retained austenite in low alloyed TRIP-steel determined by high energy synchrotron radiation
In: Materials Science Forum, Vol. 772, 2014, S. 129-133, ISSN 02555476, 10.4028/www.scientific.net/MSF.772.129

Griesche, Axel;  Dabah, Eitan;  Kannengießer, Thomas;  Kardjilov, Nikolay;  Hilger, André;  Manke, Ingo 

Three-dimensional imaging of hydrogen blister in iron with neutron tomography
In: Acta materialia. - Amsterdam [u.a.] : Elsevier Science, Bd. 78.2014, S. 14-22

Publikationslink   

Buchbeitrag
Kannengießer, Thomas 

Herausforderungen beim Schweißen von Bauteilen aus höherfesten Feinkornbaustählen
In: Schweißtechnische Fachtagung. - Magdeburg : Verl. Univ. Magdeburg, insges. 10 S., 2014 ; Kongress: Schweißtechnische Fachtagung; 24 (Magdeburg) : 2014.05.15

Kromm, Arne;  Kannengießer, Thomas 

In situ observation of stress accumulation during sub-merged arc welding
In: Advanced materials research. - Zug : Scitec Publ, Bd. 996.2014, S. 417-423

Publikationslink   

Schröpfer, Dirk;  Kannengießer, Thomas;  Kromm, Arne 

Influence of Heat Control on Welding Stresses in Multilayer-Component Welds of High-Strength Steel S960QL
In: Advanced materials research. - Zug : Scitec Publ, Bd. 996.2014, S. 475-480

Publikationslink   

Kannengießer, Thomas;  Kromm, A. 

Moderne Methoden der Spannungsanalyse an geschweißten Komponenten
In: 15. Sommerkurs Werkstoffe und Fügen : Magdeburg, 12. und 13. September 2014. - Magdeburg : Univ., S. 27-34 ; Kongress: Sommerkurs Werkstoffe und Fügen; 15 (Magdeburg) : 2014.09.12-13

Lausch, Thomas;  Steger, Jörg;  Kannengießer, Thomas;  Schmitz-Niederau, Martin 

Multiaxiale Belastungsanalyse an dickwandigen Bauteilschweißungen aus 13CrMoV9-10
In: DVS Congress 2014; Band 306; ISBN 978-3-945023-7; S. 42-48

Schaupp, Thomas;  Schröpfer, Dirk;  Kromm, Arne;  Kannengießer, Thomas 

Welding residual stress distribution of quenched and tempered and thermo-mechanically hot rolled high strength steels
In: Advanced materials research. - Zug : Scitec Publ, Bd. 996.2014, S. 457-462

Publikationslink   

Originalartikel in begutachteter nationaler Zeitschrift
Kannengießer, Thomas 

Herausforderungen beim Schweißen von Bauteilen aus höherfesten Feinkornbaustählen
In: Schweißen und Schneiden, Band 66; Heft 4, ISSN 0036-7184; S. 190-199

2013

Begutachteter Zeitschriftenartikel
Kannengiesser, T.;  Boellinghaus, T. 

Cold cracking tests - An overview of present technologies and applications
In: Welding in the World, Vol. 57, 2013, Issue 1, S. 3-37, ISSN 00432288, 10.1007/s40194-012-0001-7

Gollnow, C.;  Kannengiesser, T. 

Hot cracking analysis using in situ digital image correlation technique
In: Welding in the World, Vol. 57, 2013, Issue 3, S. 277-284, ISSN 00432288, 10.1007/s40194-013-0027-5

Lausch, Thomas;  Kannengiesser, Thomas;  Schmitz-Niederau, Martin 

Multi-axial load analysis of thick-walled component welds made of 13CrMoV9-10
In: Journal of Materials Processing Technology, 2013, S. 1234-1240, ISSN 09240136, 10.1016/j.jmatprotec.2013.01.008

Lausch, T.;  Kannengiesser, T.;  Schmitz-Niederau, M. 

Multi-axial load analysis of thick-walled component welds made of 13CrMoV9-10
In: Journal of Materials Processing Technology, Vol. 213, 2013, Issue 7, S. 1234-1240, ISSN 09240136, 10.1016/j.jmatprotec.2013.01.008

Dabah, E.;  Kannengiesser, T.;  Mente, T.;  Beyer, K.;  Brauser, S. 

Quantification of hydrogen effective diffusion coefficients and effusion behavior in duplex stainless steel weld metals
In: Welding in the World, Vol. 57, 2013, Issue 4, S. 561-567, ISSN 00432288, 10.1007/s40194-013-0051-5

Griesche, Axel;  Solórzano, Eusebio;  Beyer, Katrin;  Kannengiesser, Thomas 

The advantage of using in-situ methods for studying hydrogen mass transport - neutron radiography vs. carrier gas hot extraction
In: International journal of hydrogen energy. - New York, NY [u.a.] : Elsevier, Bd. 38.2013, 34, S. 14725-14729

Publikationslink   

Buchbeitrag
Gollnow, Christian;  Kannengiesser, Thomas;  Lauer, Roman;  Dong, M.;  Riekers, Ralf 

Experimental and numerical analysis of local thermomechanical behavior for hot cracking assessment in welds
In: Mathematical modelling of weld phenomena 10 : [papers presented at the 10th International Seminar \"Numerical Analysis of Weldability\", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria. - Graz : Verl. der Techn. Univ. Graz, S. 357-370, 2013 ; [Kongress: 10. International Seminar \"Numerical Analysis of Weldability\", Schloss Seggau near Graz, 24. - 26.09.2012]

Held, Ester;  Ohl, H.;  Gibmeier, Jens;  Kromm, Arne;  Kannengießer, Thomas 

Mikrostruktur- und Härteentwicklung in Schweißnähten mit neuartigen LTT-Schweißzusatzwerkstoffen
In: Fortschritte in der Metallographie : [Vortragstexte der 47. Metallographie-Tagung, 18. - 20. September 2013 in Friedrichshafen]. - Bonn : Inventum GmbH ; [Kongress: 47. Metallographie-Tagung, Friedrichshafen, 18. - 20. September, 2013]

Schröpfer, Dirk;  Kannengießer, Thomas;  Lausch, Thomas 

Untersuchungen zum Einfluss der Wärmeführung auf die Eigenspannungsausbildung und Gesamtbeanspruchung in Schweißverbindungen aus hochfestem Feinkornbaustahl
In: DVS Congress 2013 : Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013. - Düsseldorf : DVS Media ; [Kongress: DVS Congress 2013, Essen, 16. - 21. September, 2013]

Herausgeberschaft
Bhatti, A.A.;  Barsoum, Z.;  Van Der Mee, V.;  Kromm, A.;  Kannengiesser, T. 

Fatigue strength improvement of welded structures using new low transformation temperature filler materials
In: Procedia Engineering, Vol. 66, 2013, S. 192-201, ISSN 18777058, 10.1016/j.proeng.2013.12.074

Czichos, Horst 

Handbook of Technical Diagnostics
In: 2013, S. , 10.1007/978-3-642-25850-3

Griesche, A.;  Dabah, E.;  Hilger, A.;  Kardjilov, N.;  Manke, I.;  Kannengiesser, T. 

Neutron imaging of hydrogen in steels
In: Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, Vol. 2, 2013, S. 945-950

Rhode, M.;  Kromm, A.;  Kannengiesser, T. 

Residual stresses in multi-layer component welds
In: ASM Proceedings of the International Conference: Trends in Welding Research, 2013, S. 48-54

2012

Begutachteter Zeitschriftenartikel
Kannengiesser, T.;  Lausch, T. 

Diffusible hydrogen content depending on welding and cooling parameters
In: Welding in the World, Vol. 56, 2012, Issue 11-12, S. 26-33, ISSN 00432288, 10.1007/BF03321392

Dabah, E.;  Kannengiesser, Th.;  Eliezer, D.;  Boellinghaus, Th. 

In situ synchrotron X-ray radiation analysis of hydrogen behavior in stainless steel subjected to continuous heating
In: Journal of Materials Science, Vol. 47, 2012, Issue 15, S. 5879-5885, ISSN 00222461, 10.1007/s10853-012-6489-9

Lorenz, S.;  Kannengiesser, T.;  Posch, G. 

Suitability of high-alloyed flux-cored wire electrodes for laser-GMA hybrid welding
In: Welding and Cutting, Vol. 11, 2012, Issue 3, S. 181-187, ISSN 16123433

2011

Begutachteter Zeitschriftenartikel
Kannengiesser, T.;  Rethmeier, M.;  Portella, P.D.;  Ewert, U.;  Redmer, B. 

Assessment of hot cracking behaviour in welds
In: International Journal of Materials Research, Vol. 102, 2011, Issue 8, S. 1001-1006, ISSN 18625282, 10.3139/146.110545

Kromm, A.;  Kannengiesser, T.H. 

Characterizing phase transformations of different LTT alloys and their effect on residual stresses and cold cracking
In: Welding in the World, Vol. 55, 2011, Issue 3-4, S. 48-56, ISSN 00432288

Kannengiesser, Th.;  Lausch, Th.;  Kromm, A. 

Effects of heat control on the stress build-up during high-strength steel welding under defined restraint conditions
In: Welding in the World, Vol. 55, 2011, Issue 7-8, S. 58-65, ISSN 00432288

Kromm, A.;  Brauser, S.;  Kannengiesser, T.;  Rethmeier, M. 

High-energy synchrotron diffraction study of a transformation induced plasticity steel during tensile deformation
In: Journal of Strain Analysis for Engineering Design, Vol. 46, 2011, Issue 7, S. 581-591, ISSN 03093247, 10.1177/0309324711403969

Brauser, S.;  Kannengiesser, Th. 

Hydrogen absorption and diffusion in different welded duplex steels
In: Welding in the World, Vol. 55, 2011, Issue 5-6, ISSN 00432288

Dabah, E.;  Kannengiesser, T.;  Eliezer, D.;  Boellinghaus, T. 

In situ analysis of hydrogen behaviour in stainless steels by high energy synchrotron radiation
In: Materials Science and Engineering A, Vol. 528, 2011, Issue 3, S. 1608-1614, ISSN 09215093, 10.1016/j.msea.2010.10.090

Altenkirch, J.;  Gibmeier, J.;  Kromm, A.;  Kannengiesser, T.;  Nitschke-Pagel, T.;  Hofmann, M. 

In situ study of structural integrity of low transformation temperature (LTT)-welds
In: Materials Science and Engineering A, Vol. 528, 2011, Issue 16-17, S. 5566-5575, ISSN 09215093, 10.1016/j.msea.2011.03.091

Brauser, S.;  Kromm, A.;  Kannengiesser, T.;  Rethmeier, M. 

In-situ analysis of solid state phase transformation in TRIP-aided steels by synchrotron diffraction
In: Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 29, 2011, Issue 3, S. 81s-85s, ISSN 02884771, 10.2207/qjjws.29.81s

Marcano, D.;  Mendez, P.;  Gibbs, J.W.;  Kannengiesser, Th. 

Martensite fraction determination using cooling curve analysis
In: Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. 172-174, 2011, S. 221-226, ISSN 10120394, 10.4028/www.scientific.net/SSP.172-174.221

Beyer, K.;  Kannengiesser, T.;  Griesche, A.;  Schillinger, B. 

Neutron radiography study of hydrogen desorption in technical iron
In: Journal of Materials Science, Vol. 46, 2011, Issue 15, S. 5171-5175, ISSN 00222461, 10.1007/s10853-011-5450-7

Kromm, A.;  Kannengiesser, T.;  Altenkirch, J.;  Gibmeier, J. 

Residual stresses in multilayer welds with different martensitic transformation temperatures analyzed by high-energy synchrotron diffraction
In: Materials Science Forum, Vol. 681, 2011, S. 37-42, ISSN 02555476, 10.4028/www.scientific.net/MSF.681.37

Beyer, K.;  Kannengiesser, T.;  Griesche, A.;  Schillinger, B. 

Study of hydrogen effusion in austenitic stainless steel by time-resolved in-situ measurements using neutron radiography
In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 651, 2011, Issue 1, S. 211-215, ISSN 01689002, 10.1016/j.nima.2011.02.010

Ried, P.;  Gaber, M.;  Beyer, K.;  Müller, R.;  Kipphardt, H.;  Kannengießer, T. 

Thermo analytic investigation of hydrogen effusion behavior - Sensor evaluation and calibration
In: Steel Research International, Vol. 82, 2011, Issue 1, S. 14-19, ISSN 16113683, 10.1002/srin.201000237

Altenkirch, J.;  Gibmeier, J.;  Kostov, V.;  Kromm, A.;  Kannengiesser, Th.;  Doyle, S.;  Wanner, A. 

Time-and temperature-resolved synchrotron X-ray diffraction: Observation of phase transformation and strain evolution in novel low temperature transformation weld filler materials
In: Journal of Strain Analysis for Engineering Design, Vol. 46, 2011, Issue 7, S. 563-579, ISSN 03093247, 10.1177/0309324711413190

Heinze, C.;  Kromm, A.;  Schwenk, C.;  Kannengiesser, T.;  Rethmeier, M. 

Welding residual stresses depending on solid-state transformation behaviour studied by numerical and experimental methods
In: Materials Science Forum, Vol. 681, 2011, S. 85-90, ISSN 02555476, 10.4028/www.scientific.net/MSF.681.85

Herausgeberschaft
Bar, R.;  Dabah, E.;  Eliezer, D.;  Kannengiesser, Th.;  Boellinghaus, Th. 

The influence of hydrogen on thermal desorption processes in structural materials
In: Procedia Engineering, Vol. 10, 2011, S. 3668-3676, ISSN 18777058, 10.1016/j.proeng.2011.04.604

2010

Begutachteter Zeitschriftenartikel
Kannengiesser, T.;  Tiersch, N. 

Comparative study between hot extraction methods and mercury method - A national round robin test
In: Welding in the World, Vol. 54, 2010, Issue 5-6, S. R108-R114, ISSN 00432288

Eliezer, D.;  Nissim, Y.;  Kannengießer, T. 

Effects of shielding with various hydrogen-argon mixtures on supermartensitic stainless steel TIG welds
In: Materialpruefung/Materials Testing, Vol. 52, 2010, Issue 5, S. 306-315, ISSN 00255300

Brauser, S.;  Kannengiesser, Th. 

Hydrogen absorption of different welded duplex steels
In: International Journal of Hydrogen Energy, Vol. 35, 2010, Issue 9, S. 4368-4374, ISSN 03603199, 10.1016/j.ijhydene.2010.01.148

Kromm, A.;  Kannengiesser, T.;  Gibmeier, J. 

In-situ observation of phase transformations during welding of low transformation temperature filler material
In: Materials Science Forum, Vol. 638-642, 2010, S. 3769-3774, ISSN 02555476, 10.4028/www.scientific.net/MSF.638-642.3769

Brauser, S.;  Kromm, A.;  Kannengiesser, T.;  Rethmeier, M. 

In-situ synchrotron diffraction and digital image correlation technique for characterizations of retained austenite stability in low-alloyed transformation induced plasticity steel
In: Scripta Materialia, Vol. 63, 2010, Issue 12, S. 1149-1152, ISSN 13596462, 10.1016/j.scriptamat.2010.08.007

Kannengiesser, T.;  Tiersch, N. 

Measurements of diffusible hydrogen contents at elevated temperatures using different hot extraction techniques - An international round robin test
In: Welding in the World, Vol. 54, 2010, Issue 5-6, S. R115-R122, ISSN 00432288

Lorenz, S.;  Kannengiesser, T.;  Herold, H.;  Posch, G. 

Suitability of high alloyed wire electrodes for the positional laser-GMA-hybrid welding
In: International Journal of Microstructure and Materials Properties, Vol. 5, 2010, Issue 2-3, S. 245-260, ISSN 17418410, 10.1504/IJMMP.2010.035943

Herausgeberschaft
Kromm, A.;  Kannengiesser, T.;  Gibmeier, J. 

In situ studies of phase transformation and residual stresses in LTT alloys during welding using synchrotron radiation
In: In-situ Studies with Photons, Neutrons and Electrons Scattering, 2010, S. 13-26, 10.1007/978-3-642-14794-4_2

Kannengiesser, T.;  Komizo, Y.-I.;  Babu, S.S.;  Ramirez, A.J. 

In-situ studies with photons, neutrons and electrons scattering
In: In-situ Studies with Photons, Neutrons and Electrons Scattering, 2010, S. 1-204, 10.1007/978-3-642-14794-4

2009

Begutachteter Zeitschriftenartikel
Kromm, A.;  Kannengiesser, Th.;  Gibmeier, J.;  Genzel, Ch.;  Van Der Mee, V. 

Determination of residual stresses in Low Transformation Temperature (LTT-) weld metals using X-ray and high energy synchrotron radiation
In: Welding in the World, Vol. 53, 2009, Issue 1-2, S. 3-16, ISSN 00432288

Kannengiesser, T.;  Kromm, A. 

Formation of welding residual stresses in low transformation temperature (LTT) materials [Tensões residuais de soldagem em materias de baixa temperatura de transformação (BTT)]
In: Soldagem e Inspecao, Vol. 14, 2009, Issue 1, S. 74-81, ISSN 01049224

Buchbeitrag
Böllinghaus, Thomas;  Byrne, Gerry;  Cherpakov, Boris Ilich;  Chlebus, Edward;  Cross, Carl E.;  Denkena, Berend;  Dilthey, Ulrich;  Hatsuzawa, Takeshi;  Herfurth, Klaus;  Herold, Horst;  Kaldos, Andrew;  Kannengiesser, Thomas;  Karpenko, Michail;  Karpuschewski, Bernhard;  Marya, Manuel;  Marya, Surendar K.;  Matthes, Klaus-Jürgen;  Middeldorf, Klaus;  Oliveira, Joao Fernando G.;  Pieschel, Jörg;  Priem, Didier M.;  Reidel, Frank;  Schleser, Markus;  Tekkaya, A. Erman;  Todtermuschke, Marcel;  Vereschaka, Anatole;  Hofe, Detlef von;  Wagner, Nikolaus;  Wodara, Johannes;  Woeste, Klaus 

Manufacturing engineering
In: Springer handbook of mechanical engineering . - [Berlin] : Springer, ISBN 3-540-49131-7, S. 523-773

Publikationslink   

Herausgeberschaft
Schwenk, C.;  Kannengiesser, Th.;  Rethmeier, M. 

Restraint conditions and welding residual stresses in self-restrained cold cracking tests
In: ASM Proceedings of the International Conference: Trends in Welding Research, 2009, S. 766-773, 10.1361/cp2008twr766

2008

Begutachteter Zeitschriftenartikel
Lorenz, S.;  Kannengiesser, Th.;  Herold, H.;  Posch, G. 

Aspects of positional laser-GMA-hybrid welding using high alloyed tubular cored wire electrodes
In: Welding in the World, Vol. 52, 2008, Issue SPEC. ISS., S. 479-484, ISSN 00432288

Wongpanya, P.;  Boellinghaus, Th.;  Lothongkum, G.;  Kannengiesser, Th. 

Effects of preheating and interpass temperature on stresses in S 1100 QL multi-pass butt-welds
In: Welding in the World, Vol. 52, 2008, Issue 3-4, S. 79-92, ISSN 00432288

Buchbeitrag
Lorenz, Stephan;  Kannengiesser, Thomas;  Posch, Gerhard 

Solid wire vs. flux cored Wire - comparing investigations for GMA-laser-hybrid welding
In: Design, fabrication and economy of welded structures : international conference proceedings 2008, Miskolc, Hungary, April 24 - 26, 2008. - Chichester : Horwood, S. 477-484 ; [Kongress: International Conference on Design, Fabrication and Economy of Welded Structures, Miskolc, 24.-26.04.2008]

Herausgeberschaft
Wolf, M.;  Kannengießer, Th.;  Böllinghaus, Th. 

Determination of critical strain rate for solidification cracking by numerical simulation
In: Hot Cracking Phenomena in Welds II, 2008, S. 77-92

Kromm, A.;  Kannengießer, Th. 

Influence of local weld deformation on the solidification cracking susceptibility of a fully austenitic stainless steel
In: Hot Cracking Phenomena in Welds II, 2008, S. 127-145

2007

Begutachteter Zeitschriftenartikel
Pettersson, C.O.;  Boellinghaus, T.;  Kannengiesser, T. 

Corrosion testing of welds, A review of methods
In: Welding in the World, Vol. 51, 2007, Issue 7-8, S. 79-106, ISSN 00432288

Pettersson, C.O.;  Boellinghaus, T.;  Kannengiesser, T. 

Corrosion testing of welds, a review of methods
In: Rivista Italiana della Saldatura, Vol. 59, 2007, Issue 4, S. 529-552, ISSN 00356794

Buchbeitrag
Boellinghaus, Thomas;  Kannengießer, Thomas 

Prüfen Sie noch oder bewerten Sie schon - Entwicklungen in der Untersuchung geschweißter Bauteile
In: Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft : 10. Internationales Aachener Schweißtechnik-Kolloquium ; 24. - 25.10.2007 ; [IASTK\'07]. - Aachen : Shaker ; [Kongress: 10. Internationales Aachener Schweißtechnik-Kolloquium, IAST\'07, Aachen, 24. - 25.10.2007]

2006

Begutachteter Zeitschriftenartikel
Kannengiesser, T.;  Boellinghaus, T.;  Neuhaus, M. 

Effects of the load history on the residual stress distribution in welded components
In: Welding in the World, Vol. 50, 2006, Issue 7-8, S. 11-17, ISSN 00432288

Kannengießer, Thomas;  Cross, Carl Edward;  Schobbert, Helmut 

Prüfung der Kalt- und Heißrisssicherheit gefügter Bauteile
In: Jahrbuch Schweisstechnik. - Düsseldorf : DVS Media GmbH, 2006

2005

Begutachteter Zeitschriftenartikel
Stelling, K.;  Schobbert, H.;  Kannengiesser, Th.;  Boellinghaus, Th. 

Vertical-up and -down laser plasma powder hybrid welding of a high nitrogen austenitic stainless steel
In: Welding in the World, Vol. 49, 2005, Issue 5-6, S. 45-49, ISSN 00432288

2004

Originalartikel in begutachteter zeitschriftenartiger Reihe
Neuhaus, M. (ext.);  Kannengiesser, Th. (ext.);  Boellinghaus, Th. (ext.);  Herold, Horst;  Hoffmeister, H. (ext.) 

Beurteilung der Kaltrisssicherheit von Schweißverbindungen in realen Konstruktionen mit der Finite-Elemente-Methode.
In: Deutscher Verband für Schweißtechnik e.V. (Veranst.): Schweißen und Schneiden 2004 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Magdeburg vom 22. bis 24. September 2004. Düsseldorf : DVS-Verl., 2004, S. 195 - 200 (DVS-Berichte 232)

2002

Herausgeberschaft
Boellinghaus, Th.;  Kannengiesser, Th. 

Effect of Filler Material Selection and Shrinkage Restraint on Stress Strain Build Up in Component Welds
In: ASM Proceedings of the International Conference: Trends in Welding Research, 2002, S. 906-911

2001

Originalartikel in begutachteter internationaler Zeitschrift
Kannengiesser, T. (ext.);  Boellinghaus, T. (ext.);  Florian, W. (ext.);  Herold, Horst 

Effect of weld metal strength and welding conditions on reaction forces and stress distribution of restrained components.
In: Welding in the world : Journal of the International Institute of Welding [Oxford] 45(2001), Nr. 1/2, S. 18 - 26

2000

Begutachteter Zeitschriftenartikel
Kannengiesser, Thomas;  Florian, Wolfgang;  Herold, Horst 

Incremental hole-drilling method for the determination of residual stresses on welds
In: Welding Research Abroad, Vol. 46, 2000, Issue 3, S. 12-19, ISSN 00432318

1999

Begutachteter Zeitschriftenartikel
Kannengiesser, Thomas;  Florian, Wolfgang;  Herold, Horst 

Incremental hole-drilling method for the determination of residual stresses on welds
In: Schweissen und Schneiden/Welding and Cutting, Vol. 51, 1999, Issue 8, S. E165-E168, ISSN 00367184

Letzte Änderung: 28.08.2017 - Ansprechpartner:

Sie können eine Nachricht versenden an: Webmaster
Sicherheitsabfrage:
Captcha
 
Lösung: