Publikationen

2021

Begutachteter Zeitschriftenartikel

Borzabadi Farahani, Ehsan;  Sobhani Aragh, B.;  Voges, Jannik;  Juhre, Daniel 

On the crack onset and growth in martensitic micro-structures; a phase-field approach
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, 1960, Volume 194(2020), article 106187

Publikationslink

Buchbeitrag

Nitzschke, Steffen;  Duvigneau, Fabian;  Daniel, Christian;  Juhre, Daniel;  Woschke, Elmar 

Untersuchung unterschiedlicher Modellierungstiefen im Rahmen einer ganzheitlichen Simulationsmethodik zur akustischen Bewertung von Antriebsaggregaten
In: Motor- und Aggregate-Akustik - 11. Magdeburger Symposium : Tagungsband [2021]: 11. Magdeburger Symposium : Tagungsband [2021] . - 2021, S. 52-64

Publikationslink

Dissertation

Kazemi, Omid;  Halle, Thorsten [AkademischeR BetreuerIn];  Juhre, Daniel [AkademischeR BetreuerIn];  Krüger, Manja [AkademischeR BetreuerIn] 

Phase field based study of microstructure evolution in solidification of Mo-rich Mo-Si-B alloys
In: Magdeburg, 2021, XV, 99 Seiten, Illustrationen, Diagramme, 30 cm

2020

Begutachteter Zeitschriftenartikel

Spannan, Lars;  Duvigneau, Fabian;  Gavila Lloret, Maria;  Daniel, Christian;  Juhre, Daniel;  Woschke, Elmar 

A study on harmonic excitation based experimental characterization of damping materials for acoustic simulations
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik: wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 40 (2020), 2, S. 134-148

Publikationslink

Petö, Márton;  Duvigneau, Fabian;  Juhre, Daniel;  Eisenträger, Sascha 

Enhanced numerical integration scheme based on image compression techniques - application to rational polygonal interpolants
In: Archive of applied mechanics: (Ingenieur-Archiv) - Berlin: Springer . - 2020, insges. 23 S.

Publikationslink

El Yaagoubi, Mohammed;  Meier, Jens;  Juhre, Daniel 

Lifetime prediction of carbon black filled elastomers based on the probability distribution of particle using an inelastic and hyperelastic material model
In: Engineering failure analysis: materials, structures, components, reliability, design - Oxford [u.a.]: Elsevier Science, Volume118 (2020), Artikel 104943

Publikationslink

Buchbeitrag

Prasad, Braj Bhushan;  Duvigneau, Fabian;  Juhre, Daniel;  Woschke, Elmar 

Design of test specimen for wind turbines to evaluate passive vibration reduction concepts based on granular materials
In: Fortschritte der Akustik - DAGA 2020: 46. Jahrestagung für Akustik, 16.-19. März 2019 in Hannover - Berlin: Deutsche Gesellschaft für Akustik e.V. (DEGA), 2020 . - 2020, S. 446-449 ; [Konferenz: DAGA 2020, Hannover, 16.-19. März 2020]

Duvigneau, Fabian;  Hähnlein, Frederik;  Daniel, Christian;  Schrader, Peter;  Woschke, Elmar;  Juhre, Daniel 

Untersuchung des Einflusses von Randbedingungen auf die Vergleichbarkeit von numerischer und experimenteller Modalanalyse
In: Fortschritte der Akustik - DAGA 2020: 46. Jahrestagung für Akustik, 16.-19. März 2019 in Hannover - Berlin: Deutsche Gesellschaft für Akustik e.V. (DEGA), 2020 . - 2020, S. 274-277 ; [Konferenz: DAGA 2020, Hannover, 16.-19. März 2020]

Prasad, Braj Bhushan;  Duvigneau, Fabian;  Woschke, Elmar;  Juhre, Daniel 

Wind turbine blade and generator test specimen for evaluating a passive vibration reduction concept based on granular materials
In: Proceedings of the ISMA 2020, International Conference on Noise and Vibration Engineering/USD 2020, International Conference on Uncertainty in Structural Dynamics: 7 to 9 September 2020$/ International Conference on Noise and Vibration Engineering - Heverlee (Belgium): KU Leuven, Department of Mechanical Engineering, 2020; Desmet, W. . - 2020, S. 3525-3540

Dissertation

Hoffmann, Thomas;  Rose, Georg [AkademischeR BetreuerIn];  Juhre, Daniel [AkademischeR BetreuerIn] 

Verfahren zur Erhöhung der visuellen Wahrnehmung neurovaskulärer Stents unter Röntgendurchleuchtung
In: Magdeburg, 2020, XIV, 108 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 92-97]

2019

Begutachteter Zeitschriftenartikel

Makvandi, Resam;  Duczek, Sascha;  Juhre, Daniel 

A phase-field fracture model based on strain gradient elasticity
In: Engineering fracture mechanics - Kidlington: Elsevier Science, Volume 220 (2019), article 106648

Publikationslink

Gehrmann, Oliver;  Kröger, Nils Hendrik;  Krause, Maria;  Juhre, Daniel 

Dissipated energy density as fatigue criterion for non-relaxing tensional loadings of non-crystallizing elastomers?
In: Polymer testing - Amsterdam [u.a.]: Elsevier Science, Volume 78 (2019), article 105953

Publikationslink

Gehrmann, Oliver;  Kröger, Nils Hendrik;  Juhre, Daniel 

Improved material parameter identification for end-of-life predictions under mechanical fatigue
In: Kautschuk, Gummi, Kunststoffe - Heidelberg: Hüthig, Bd. 72.2019, 2, S. 31-34

Chavalla, Sharath;  Hoffmann, Thomas;  Juhre, Daniel 

Simulation of NiTi stent deployment in a realistic patient carotid artery using isogeometric analysis
In: Procedia structural integrity - Amsterdam: Elsevier, 2017, Bd. 15.2019, S. 8-15

Publikationslink

Rahman, Rana Atta ur;  Juhre, Daniel;  Halle, Thorsten;  Mehmood, Shahid;  Asghar, Waqas 

Types, DSC thermal characterization of Fe-Mn-Si based shape memory smart materials and their feasibility for human body in Ttrms of austenitic start temperatures
In: Journal of engineering technology / Engineering Technology Division, American Society for Engineering Education - Ferguson, Mo.: EDT, Bd. 8 (2019), 1, S. 185-206

Publikationslink

Buchbeitrag

Farahani, Ehsan Borzabadi;  Juhre, Daniel 

A phase field model for the evolution of martensitic microstructures in austenitic carbon steels
In: 14. Magdeburger Maschinenbau-Tage 2019 - Magdeburger Ingenieurtage - 24. und 25. September 2019 : Tagungsband - Magdeburg: Otto von Guericke Universität Magdeburg, Fakultät Maschinenbau, Institut für Mobile Systeme - Lehrstuhl Mechatronik, S. 348-356

Publikationslink

Liu, Zhengkun;  Juhre, Daniel 

Adaptive phase-field model of mixed mode fracture in compression and its experimental verification
In: 14. Magdeburger Maschinenbau-Tage 2019 - Magdeburger Ingenieurtage - 24. und 25. September 2019 : Tagungsband: 24. und 25. September 2019 : Tagungsband - Magdeburg: Otto von Guericke Universität Magdeburg, Fakultät Maschinenbau, Institut für Mobile Systeme - Lehrstuhl Mechatronik; Kasper, Roland . - 2019, S. 389-398

Publikationslink

Duvigneau, Fabian;  Spannan, Lars;  Woschke, Elmar;  Juhre, Daniel 

Bestimmung frequenzabhängiger Materialparameter von akustischen Dämmmaterialien
In: Tagungsband - DAGA 2019: 45. Jahrestagung für Akustik : 18.-21. März 2019, Rostock - Berlin: Deutsche Gesellschaft für Akustik e.V. (DEGA) . - 2019, S. 141-144

Publikationslink

Händler, Andreas;  Juhre, Daniel;  Bernal Martínez, Santiago;  Netuzhylov, Hennadiy 

Virtualization of the Meisterbock process using numerical simulation
In: 14. Magdeburger Maschinenbau-Tage 2019 - Magdeburger Ingenieurtage - 24. und 25. September 2019 : Tagungsband - Magdeburg: Otto von Guericke Universität Magdeburg, Fakultät Maschinenbau, Institut für Mobile Systeme - Lehrstuhl Mechatronik, S. 280-290

Publikationslink

2018

Begutachteter Zeitschriftenartikel

Rahman, Rana Atta Ur;  Juhre, Daniel;  Halle, Thorsten 

Comparison of biaxial loading of ferrous based (Fe-based) shape memory smart materials with linear and non-linear materials
In: Current smart materials - Sharjah: Bentham Science, Bd. 3.2018, 2, S. 90-98

Publikationslink

Spindler, Christian;  Juhre, Daniel 

Development of a shape memory alloy actuator using generative manufacturing
In: The international journal of advanced manufacturing technology - London: Springer, insges. 10 S., 2018

Publikationslink

Rahman, Rana Atta Ur;  Juhre, Daniel;  Khan, Usama 

Experimental characterization for initiation of crack during fatigue analysis of mineralized aluminium alloy under both thermal and mechanical loading on rotating & bending machine
In: Current smart materials - Sharjah: Bentham Science, Bd. 3.2018

Publikationslink

Rahman, R. A.;  Juhre, Daniel;  Halle, Thorsten 

Experimental characterization of phase transformation of Fe15mn10cr8ni4si (Wt. %) iron-based shape memory functional materials using dilatometry
In: International journal of advances in mechanical and civil engineering: IJAMCE - Bhubaneswar: Institute of Research and Journals (IRAJ), Bd. 5.2018, 6, S. 10-13; Experimental Characterization of Phase Transformation of Fe15mn10cr8ni4si (Wt. %) Iron-Based Shape Memory Functional Materials using Dilatometry

El Yaagoubi, Mohammed;  Juhre, Daniel;  Meier, Jens;  Kröger, Nils;  Alshuth, Thomas;  Giese, Ulrich 

Lifetime prediction of filled elastomers based on particle distribution and the J-integral evaluation
In: International journal of fatigue: materials, structures, components - Oxford: Elsevier, Bd. 112.2018, S. 341-354

Publikationslink

Liu, Zheng Kun;  Juhre, Daniel 

Phase-field modelling of crack propagation in anisotropic polycrystalline materials
In: Procedia structural integrity - Amsterdam: Elsevier, 2017, Bd. 13.2018, S. 787-792

Publikationslink

Liu, Zheng Kun;  Juhre, Daniel 

Phase-field modelling of crack propagation in anisotropic polycrystalline materials
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik: wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., 1980, Bd. 38.2018, 3, S. 286-299

Publikationslink

Liu, Zhengkun;  Roggel, Julian;  Juhre, Daniel 

Phase-field modelling of fracture in viscoelastic solids
In: Procedia structural integrity - Amsterdam: Elsevier, Bd. 13 (2018), S. 781-786

Publikationslink

Rahman, Rana Atta Ur;  Juhre, Daniel;  Halle, Thorsten 

Review of types, properties, and importance of ferrous based shape memory alloys
In: Han\'guk-chaeryo-hakhoe-chi - Sŏul, Bd. 28.2018, 7, S. 381-390

Publikationslink

El Yaagoubi, Mohammed;  Juhre, Daniel;  Meier, Jens;  Alshuth, Thomas;  Giese, Ulrich 

Tearing energy and path-dependent J-integral evaluation considering stress softening for carbon black reinforced elastomers
In: Engineering fracture mechanics - Kidlington: Elsevier Science, Bd. 190.2018, S. 259-272

Publikationslink

Dissertation

Kulkarni, Gaurav Abhay;  Specht, Eckehard [GutachterIn];  Juhre, Daniel [GutachterIn] 

Local heat transfer and stress analysis of direct chill casting process
In: Barleben: docupoint Verlag, 2019, xiv, 151 Seiten, Illustrationen, Diagramme, 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; Volume 34)

El Yaagoubi, Mohammed;  Juhre, Daniel [GutachterIn] 

Vorhersage der charakteristischen Lebensdauer von Elastomeren im Rahmen der probabilistischen Bruckmechanik
In: Magdeburg, 2018, VIII, 161 Seiten, Illustrationen, Diagramme, Tabellen ; [Literaturverzeichnis: Seite 158-161]

2017

Abstract

Voss, Samuel;  Chavalla, Sharath;  Juhre, Daniel;  Janiga, Gábor;  Beuing, Oliver 

Concept for a comprehensive simulation based tool to assist intracranial aneurysm treatment
In: International Healthcare Vision 2037 - Magdeburg: Universitätsbibliothek, S. 123-124, 2017

Hoffmann, Thomas;  Juhre, Daniel;  Cattaneo, Giorgio;  Rose, Georg;  Beuing, Oliver 

Virtuelle Erhöhung der Röntgensichtbarkeit neurovaskulärer Stents in der Radiographie
In: Recent progress and developments: 3rd Conference on Image-Guided Interventions & Focus Neuroradiologie, November 6 and 7, 2017, Magdeburg, Germany : abstract book - Magdeburg, 2017, 2017, Abs. ID 35, Seite 25 ; [Konferenz: 3rd Conference on Image-Guided Interventions & Focus Neuroradiologie, Magdeburg, Germany, November 6 and 7, 2017]

Begutachteter Zeitschriftenartikel

Gehrmann, Oliver;  Kröger, Nils Hendrik;  Erren, Peter;  Juhre, Daniel 

Estimation of the compression modulus of a technical rubber via cyclic volumetric compression tests
In: Technische Mechanik: wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst, Bd. 37.2017, 1, S. 28-36

Publikationslink

Makvandi, Resam;  Reiher, Jörg Christian;  Bertram, Albrecht;  Juhre, Daniel 

Isogeometric analysis of first and second strain gradient elasticity
In: Computational mechanics: solids, fluids, engineered materials, aging infrastructure, molecular dynamics, heat transfer, manufacturing processes, optimization, fracture & integrity : research journal - Berlin: Springer, insges. 13 S., 2017

Publikationslink

Voges, Jannik;  Makvandi, Resam;  Juhre, Daniel 

Numerical investigation of the phase evolution in polymer blends under external mechanical loadings
In: Technische Mechanik: wissenschaftliche Zeitschrift für Grundlagen und Anwendungen der technischen Mechanik - Magdeburg: Magdeburger Verein für Techn. Mechanik, Bd. 37.2017, 1, S. 37-47

El Yaagoubi, Mohammed;  Juhre, Daniel;  Meier, Jens;  Alshuth, Thomas;  Giese, Ulrich 

Prediction of energy release rate in crack opening mode (mode I) for filled and unfilled elastomers using the Ogden model
In: Engineering fracture mechanics - Kidlington: Elsevier Science, Bd. 182.2017, S. 74-85

Publikationslink

El Yaagoubi, Mohammed;  Juhre, Daniel;  Meier, Jens;  Alshuth, Thomas;  Giese, Ulrich 

Prediction of tearing energy in mode III for filled elastomers
In: Theoretical and applied fracture mechanics - Amsterdam: North-Holland, Bd. 88.2017, S. 31-38

Publikationslink

Buchbeitrag

Chavalla, Sharath Chandra;  Juhre, Daniel 

Advanced modeling of NiTi stents used in minimally invasive surgeries
In: 13. Magdeburger Maschinenbau-Tage 2017: autonom - vernetzt - nachhaltig, 27. und 28. September 2017 : Tagungsband - Magdeburg: Universitätsbibliothek, S. 283-292

Publikationslink

Gehrmann, Oliver;  Kröger, Nils;  Erren, Peter;  Juhre, Daniel 

Experimental investigation of the compression modulus at a technical EPDM, exposed to cyclic compressive hydrostatic loadings
In: Constitutive models for Rubber X: proceedings of the 10th European Conference on Constitutive Models for Rubber (ECCMR X), Munich, Germany, 28-31 August 2017) - Boca Raton, FL: CRC Press

Publikationslink

El-Yaagoubi, Mohammed;  Meier, Jens;  Alshuth, Thomas;  Giese, Ulrich;  Juhre, Daniel 

Prediction of energy release rate in opening mode of fracture mechanics for filled and unfilled elastomers
In: Constitutive models for Rubber X: proceedings of the 10th European Conference on Constitutive Models for Rubber (ECCMR X), Munich, Germany, 28-31 August 2017) - Boca Raton, FL: CRC Press

Publikationslink

Lui, Zheng Kun;  Roggel, Julian;  Juhre, Daniel 

Simulation des Risswachstums in einer Compact Tension - Probe nach ASTM E399 mit einem spröden Phasenfeldmodell
In: 13. Magdeburger Maschinenbau-Tage 2017: autonom - vernetzt - nachhaltig, 27. und 28. September 2017 : Tagungsband - Magdeburg: Universitätsbibliothek, S. 293-302

Publikationslink

2016

Artikel in Kongressband

Raghunath, Rathan;  Juhre, Daniel;  Klüppel, Manfred 

A physically motivated model for filled elastomers
In: Tire technology 2016; 16.-18.02.2016; Hannover

Juhre, Daniel;  Krause, Maria 

Das rührende Ende des Gummis - Lebensdaueruntersuchungen unter ganz besonderen Vorzeichen
In: DKG Jahrestagung 2016; 01.-02.06.2016; Nürnberg

Begutachteter Zeitschriftenartikel

Raghunath, R.;  Juhre, Daniel;  Klüppel, M. 

A physically motivated model for filled elastomers including strain rate and amplitude dependency in finite viscoelasticity
In: International journal of plasticity - New York, NY: Pergamon Press, 1985, Bd. 78.2016, S. 223-241

Publikationslink

Kröger, Nils Hendrik;  Raghunath, Rathan;  Juhre, Daniel 

Extension of DFM and MORPH in representative directions to viscous effects via Prony series approach
In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.]: Wiley-VCH, Bd. 16.2016, 1, S. 363-364

Publikationslink

Buchbeitrag

Juhre, Daniel;  Krause, Maria 

A study on the influence of mechanical preconditioning on the fatigue behavior of rubber materials
In: Constitutive Models for Rubber IX : proceedings of the 9th European Conference on Constitutive Models for Rubber, (ECCMR IX), Prague, Czech Republic, 1-4 September 2015 / eds. Bohdana Marvalová & Iva Petriková/ Marvalova - Hoboken: CRC Press, 2015; Marvalova, Bohdana . - 2015, S. 423-427, 2016

Publikationslink

2015

Artikel in Kongressband

Raghunath, Rathan;  Juhre, Daniel;  Klüppel, Manfred 

A physically motivated model for filled elastomers including strain rate and amplitude dependency in finite viscoelasticity
In: Smart, effizient, mobil: 12. Magdeburger Maschinenbau-Tage; 30.09-01.10. 2015.; Otto-von-Guericke-Universität Magdeburg

El-Yaagoubi, Mohammed;  Juhre, Daniel 

Eine Studie zum Einfluss der Materialerweichung auf die Auswertung des Spannungszustan ds an der Rissspitze bei gefüllten Elastomere
In: Smart, effizient, mobil: 12. Magdeburger Maschinenbau-Tage; 30.09-01.10.2015.; Otto-von-Guericke-Universität Magdeburg

Begutachteter Zeitschriftenartikel

Juhre, Daniel;  Raghunath, Rathan;  Klüppel, Manfred 

A physically motivated model for filled elastomers including strain rate and amplitude dependency in finite viscoelasticity
In: Proceedings in applied mathematics and mechanics: PAMM - Weinheim [u.a.]: Wiley-VCH, 2002, Bd. 15.2015, 1, S. 307-308

Publikationslink

Kröger, Nils Hendrik;  Juhre, Daniel 

Phenomenological modelling for viscohyperelasticity - how to find suitable evolution laws in order to extend hyperelastic models?
In: Proceedings in applied mathematics and mechanics: PAMM - Weinheim [u.a.]: Wiley-VCH, 2002, Bd. 15.2015, 1, S. 321-322

Publikationslink

Buchbeitrag

Raghunath, Rathan;  Klüppel, Manfred;  Juhre, Daniel 

Finite element simulation of inelastic and viscoelastic effects using a micro-structure based model for filled elastomers
In: Constitutive Models for Rubber IX : proceedings of the 9th European Conference on Constitutive Models for Rubber, (ECCMR IX), Prague, Czech Republic, 1-4 September 2015 / eds. Bohdana Marvalová & Iva Petriková/ Marvalova - Hoboken: CRC Press, 2015; Marvalova, Bohdana . - 2015, S. 331-337

Publikationslink

Ludwig, Marvin;  Alshuth, Thomas;  El Yaagoubi, Mohammed;  Juhre, Daniel 

Lifetime prediction of elastomers based on statistical occurrence of material defects
In: Constitutive Models for Rubber IX : proceedings of the 9th European Conference on Constitutive Models for Rubber, (ECCMR IX), Prague, Czech Republic, 1-4 September 2015 / eds. Bohdana Marvalová & Iva Petriková/ Marvalova - Hoboken: CRC Press, 2015; Marvalova, Bohdana . - 2015, S. 445-448

Publikationslink

Kröger, Nils Hendrik;  Juhre, Daniel 

Phenomenological modelling for viscohyperelasticity - evolution law extension for Neo-Hookean hyperelasticity
In: Constitutive Models for Rubber IX : proceedings of the 9th European Conference on Constitutive Models for Rubber, (ECCMR IX), Prague, Czech Republic, 1-4 September 2015 / eds. Bohdana Marvalová & Iva Petriková/ Marvalova - Hoboken: CRC Press, 2015; Marvalova, Bohdana . - 2015, S. 253-256

Publikationslink

2014

Artikel in Kongressband

Juhre, Daniel;  Krause Maria 

Lifetime investigations of filled elastomers under direction-modulated loading conditions
In: RubberCon 2014, Manchester (UK), 14.-15.05.2014

Raghunath, Rathan;  Juhre, Daniel 

Time-Dependent Effects of a Microstructure-Based Model for Filled Elastomers
In: Rubber Division ACS-Spring Meeting, Louisville (USA), 24.-26.03.2014

Begutachteter Zeitschriftenartikel

Krause, Maria;  Juhre, Daniel 

Influence of pre-straining on the lifetime of filled elastomers
In: Proceedings in applied mathematics and mechanics: PAMM - Weinheim [u.a.]: Wiley-VCH, Bd. 14 (2014), 1, S. 389-390

Publikationslink

Kröger, Nils Hendrik;  Juhre, Daniel 

On the parameter identification of visco-hyperelastic material models for adhesive tapes
In: Proceedings in applied mathematics and mechanics: PAMM - Weinheim [u.a.]: Wiley-VCH, Bd. 14 (2014), 1, S. 341-342

Publikationslink

2013

Begutachteter Zeitschriftenartikel

Raghunath, Rathan;  Juhre, Daniel 

Finite element simulation of deformation behaviour of cellular rubber components
In: Mechanics research communications - Amsterdam [u.a.]: Elsevier, 1974, Bd. 47.2013, S. 32-38

Publikationslink

Buchbeitrag

Juhre, Daniel;  Raghunath, Rathan;  Klüppel, Manfred;  Lorenz, Hagen 

A microstructure-based model for filled elastomers including time-dependent effects
In: Constitutive models for rubber VIII: proceedings of the 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013 / ed. Nere Gil-Negrete & Asier Alonso: proceedings of the 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013 - Boca Raton, Fla. [u.a.]: CRC Press/Balkema, 2013; Gil-Negrete, Nere . - 2013, S. 293-298 ; [Kongress: 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013]

Schellenberg, Dirk;  Juhre, Daniel;  Ihlemann, Jörn 

Identification of inelastic material parameters using component-oriented specimen
In: Constitutive models for rubber VIII: proceedings of the 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013 / ed. Nere Gil-Negrete & Asier Alonso: proceedings of the 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013 - Boca Raton, Fla. [u.a.]: CRC Press/Balkema, 2013; Gil-Negrete, Nere . - 2013, S. 191-196 ; [Kongress: 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013]

Klüppel, Manfred;  Froltsov, Vladimir;  Juhre, Daniel 

Rupture of filler-filler bonds in strained elastomers: A molecular dynamics investigation
In: Constitutive models for rubber VIII: proceedings of the 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013 / ed. Nere Gil-Negrete & Asier Alonso: proceedings of the 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013 - Boca Raton, Fla. [u.a.]: CRC Press/Balkema, 2013; Gil-Negrete, Nere . - 2013, S. 287-292 ; [Kongress: 8th European Conference on Constitutive Models for Rubber (ECCMR VIII), San Sebastián, Spain, 25 - 28 June 2013]

2012

Begutachteter Zeitschriftenartikel

Schellenberg, Dirk;  Juhre, Daniel;  Ihlemann, Jörn 

Parameter identification based on multiple inhomogeneous experiments of practical relevance
In: Proceedings in applied mathematics and mechanics : PAMM. - Weinheim [u.a.] : Wiley-VCH, Bd. 12.2012, 1, S. 629-630

Publikationslink

Buchbeitrag

Schellenberg, Dirk;  Juhre, Danie;  Ihlemann, Jörn 

Parameter identification based on multiple inhomogeneous experiments of practical relevance
In: Constitutive models for rubber VII : proceedings of the 7th European Conference on Constitutive Models for Rubber, ECCMR, Dublin, Ireland, 20 - 23 September 2011. - Boca Raton, Fla. [u.a.] : CRC Press, S. 33-38, 2012 ; [Kongress: 7th European Conference on Constitutive Models for Rubber, ECCMR, Dublin, Ireland, 20 - 23 September 2011]

Juhre, Danie;  Doniga-Crivat, Mircea;  Ihlemann, Jörn 

The influence of inelasticity on the lifetime of filled elastomers under multiaxial loading conditions
In: Constitutive models for rubber VII : proceedings of the 7th European Conference on Constitutive Models for Rubber, ECCMR, Dublin, Ireland, 20 - 23 September 2011. - Boca Raton, Fla. [u.a.] : CRC Press, S. 359-362, 2012 ; [Kongress: 7th European Conference on Constitutive Models for Rubber, ECCMR, Dublin, Ireland, 20 - 23 September 2011]

2011

Begutachteter Zeitschriftenartikel

Lorenz, Hagen;  Freund, Michael;  Juhre, Daniel;  Ihlemann, Jörn;  Klüppel, Manfred 

Constitutive generalization of a microstructure-based model for filled elastomers
In: Macromolecular theory and simulations - Weinheim: Wiley-VCH, 1992, Bd. 20.2011, 2, S. 110-123

Publikationslink

Freund, M;  Ihlemann, J;  Lorenz, H;  Juhre, D;  Klueppel, M 

FE-Implementation of the Dynamic Flocculation Model for Simulating the Inelastic Behavior of Filled Elastomers
In: KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, Vol. 64, 2011, Issue 4, S. 50--55

Freund, Michael;  Ihlemann, Jörn;  Lorenz, Hagen;  Juhre, Daniel;  Klüppel, Manfred 

FE-Implementierung des Dynamischen Flockulationsmodells zur Simulation des inelastischen Verhaltens gefüllter Elastomere
In: Kautschuk, Gummi, Kunststoffe: KGK - Heidelberg: Hüthig, 1999, Bd. 64.2011, 4, S. 50-55

Publikationslink

Freund, Michael;  Lorenz, Hagen;  Juhre, Daniel;  Ihlemann, Jörn;  Klüppel, Manfred 

Finite element implementation of a microstructure-based model for filled elastomers
In: International journal of plasticity - New York, NY: Pergamon Press, 1985, Bd. 27.2011, 6, S. 902-919

Publikationslink

Juhre, Daniel;  Ihlemann, Jörn;  Alshuth, Thomas;  Klauke, Rainer 

Some remarks on influence of inelasticity on fatigue life of filled elastomers
In: Plastics, rubber and composites - London: Taylor and Francis, 1995, Bd. 40.2011, 4, S. 180-184

Publikationslink

2010

Begutachteter Zeitschriftenartikel

Juhre, Daniel;  Reese, Stefanie 

A reduced integration finite element technology based on a thermomechanically consistent stabilisation for 3D problems
In: Computer methods in applied mechanics and engineering - Amsterdam [u.a.]: Elsevier Science, Bd. 199 (2010), 29/32, S. 2050-2058

Publikationslink

Reese, S;  Böl, M;  Christ, D 

Finite element-based multi-phase modelling of shape memory polymer stents
In: Computer Methods in Applied Mechanics and Engineering, Vol. 199, 2010, Issue 21, S. 1276--1286

Reese, Stefanie;  Böl, Markus;  Juhre, Daniel 

Finite element-based multi-phase modelling of shape memory polymer stents
In: Computer methods in applied mechanics and engineering - Amsterdam [u.a.]: Elsevier Science, 1972, Bd. 199.2010, 21/22, S. 1276-1286

Publikationslink

2009

Begutachteter Zeitschriftenartikel

Christ, Daniel;  Reese, Stefanie 

A finite element model for shape memory alloys considering thermomechanical couplings at large strains
In: International Journal of Solids and Structures, Vol. 46, 2009, Issue 20, S. 3694--3709

2008

Begutachteter Zeitschriftenartikel

Reese, S.;  Juhre, Daniel 

Finite deformation pseudo-elasticity of shape memory alloys - constitutive modelling and finite element implementation
In: International journal of plasticity - New York, NY: Pergamon Press, 1985, Bd. 24.2008, 3, S. 455-482

Publikationslink

Reese, Stefanie;  Christ, Daniel 

Finite deformation pseudo-elasticity of shape memory alloys--Constitutive modelling and finite element implementation
In: International Journal of Plasticity, Vol. 24, 2008, Issue 3, S. 455--482

Juhre, Daniel;  Reese, Stefanie 

Finite-element modelling of shape memory alloys - a comparison between small-strain and large-strain formulations
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 481/482.2008, S. 343-346

Publikationslink

Christ, D;  Reese, S 

Finite-element modelling of shape memory alloys—A comparison between small-strain and large-strain formulations
In: Materials Science and Engineering: A, Vol. 481, 2008, S. 343--346

Juhre, Daniel;  Reese, Stefanie 

Thermomechanically coupled modelling of shape memory alloys in the framework of large strains
In: GAMM-Mitteilungen/ Gesellschaft für Angewandte Mathematik und Mechanik - Weinheim: Wiley-VCH, 2004, Bd. 31.2008, 1, S. 176-191

Publikationslink

Christ, Daniel;  Reese, Stefanie 

Thermomechanically coupled modelling of shape memory alloys in the framework of large strains
In: GAMM-Mitteilungen, Vol. 31, 2008, Issue 2, S. 176--191

Dissertation

Christ, Daniel 

Thermomechanical Modelling of Shape Memory Alloy Structures in Medical Applications
In: 2008

2006

Artikel in Kongressband

Christ, Daniel;  Reese, Stefanie 

Is it necessary to model shape memory alloys within the scope of large strains?
In: Proceedings of SPIE 6170: Smart Structures and Materials

Begutachteter Zeitschriftenartikel

Christ, Daniel;  Reese, Stefanie 

Materialmodelling of shape memory alloys in range of large deformations
In: PAMM, Vol. 6, 2006, Issue 1, S. 359--360

2005

Begutachteter Zeitschriftenartikel

Pietryga, Michael;  Christ, Daniel;  Reese, Stefanie 

Implementation of Thermomechanical Coupling for Shape Memory Alloys into the Finite Element Method
In: PAMM, Vol. 5, 2005, Issue 1, S. 437--438

Christ, Daniel;  Reese, Stefanie 

Numerical Simulation of the Application of NiTi Alloys in Medical Technologies
In: PAMM, Vol. 5, 2005, Issue 1, S. 387--388

Krone, Lars;  Mentz, Juliane;  Bram, Martin;  Buchkremer, H-P;  St{\"o}ver, Detlev;  Wagner, Martin;  Eggeler, Gunther;  Christ, Daniel;  Reese, Stefanie;  Bogdanski, Denise;  others, 

The Potential of Powder Metallurgy for the Fabrication of Biomaterials on the Basis of Nickel-Titanium: A Case Study with a Staple Showing Shape Memory Behaviour
In: Advanced Engineering Materials, Vol. 7, 2005, Issue 7, S. 613--619

2004

Begutachteter Zeitschriftenartikel

Christ, D;  Reese, S;  Neuking, K 

A new finite element technology for shape memory alloy composites
In: Materialwissenschaft und Werkstofftechnik, Vol. 35, 2004, Issue 5, S. 300--306

Christ, Daniel;  Reese, Stefanie 

FE Modelling of NiTi-Composed Structures
In: PAMM, Vol. 4, 2004, Issue 1, S. 217--218

Reese, S;  Christ, D 

FEM optimization with Nitinol
In: Minimally Invasive Therapy & Allied Technologies, Vol. 13, 2004, Issue 4, S. 228--239

2003

Herausgeberschaft

Christ, Daniel;  Cervera, M;  Chiumenti, M;  de Saracibar, C Agelet 

A Mixed Finite Element Formulation for Incompressibility Using Linear Displacement and Presure Interpolations
In: 2003

Letzte Änderung: 01.09.2020 - Ansprechpartner: Webmaster