Resource-efficient Edge AI solution for predictive maintenance

Artiushenko, Viktor; Lang, Sebastian; Lerez, Christoph; Reggelin, Tobias; Hackert-Oschätzchen, Matthias

In: Procedia computer science - Amsterdam [u.a.] : Elsevier, Bd. 232 (2024), S. 348-357

Publikationslink

Characterization of iron(III) in aqueous and alkaline environments with ab initio and ReaxFF potentials

Riefer, Arthur; Hackert-Oschätzchen, Matthias; Plänitz, Philipp; Meichsner, Gunnar

In: The journal of chemical physics - Melville, NY : American Institute of Physics, Bd. 160 (2024), Heft 8, Artikel 082501, insges. 14 S.

Publikationslink

Gas/hydrogen blends as fuel to produce secondary aluminium

Michaelis, Chris; Koslowski, Eugen; Hackert-Oschätzchen, Matthias; Giese, Anne; Hamers, Christian; Schwarz, Christian

In: International aluminium journal - Hannover : Giesel, Bd. 100 (2024), Heft 1-2, S. 60-65

Publikationslink

Classification of recycled plastics of polyamides by Data Quality Levels for use and (digital) trading

Endres, Hans-Josef; Shamsuyeva, Madina; Doedt, Martin; Schiller, Christian; Jahr, Michael; Scheuble, Martin; Wollny, Andreas; Oberhauser, Teresa; Schoon, Hartmut; Yorgan, Yil; Grießbach, Sören; Hoffmann, Ansgar; Kiefer, Konrad; Zies, Rainer; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Niehues, Maximilian; Lehmann, Harald; Thürer, Susanne; Stiebitzhofer, Hannes; Stammer, Frank; Brkljac, Goran; Buschner, Nadine; Harraß, Michael

In: DIN SPEC 91481:2024-02, Beuth Verlag GmbH

Publikationslink

Methode zur Erstellung digitaler Zwillinge von Prozessenergiequellen für das elektrochemische Präzisionsabtragen

Grießbach, Sören; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Jungblut, Annegret; Jungblut, Guido; Köppl, Alois; Wengerek, Stephan

In: VDE SPEC 90028 V1.0 (de)

Digital twin for the determination of process input variables for electrochemical precision machining according to DIN SPEC 91399

Thielecke, Alexander; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias

In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 28 (2023), S. 1653-1662

Publikationslink

Design of a user-friendly human machine interface for jet electrochemical machining

Damm, Philipp; Meichsner, Gunnar; Lerez, Christoph; Hackert-Oschätzchen, Matthias

In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 28 (2023), S. 1643-1652

Publikationslink

Accuracy of pulsed electrochemical machining of NdFeB rotor magnets

Martin, André; Berger, Thomas; Loebel, Sascha; Schulze, Robin; Thielecke, Alexander; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: International Symposium on Electrochemical Machining Technology 2023 (INSECT 2023) - Saarbrücken : Center for Mechatronics and Automation Technology ; Bähre, Dirk, S. 65-70

Simulation-based analysis of electrical current induction in electrochemical precision machining of Nd-Fe-B permanent magnets

Thielecke, Alexander; Hackert-Oschätzchen, Matthias; Komilov, Nasibull; Meichsner, Gunnar; Petzold, Tom; Loebel, Sascha; Martin, André; Schulze, Robin; Schubert, Andreas

In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 117 (2023), S. 225-230

Publikationslink

Derivation of parameter sets for the ReaxFF+ method for modeling an electrochemical machining process

Riefer, Arthur; Hackert-Oschätzchen, Matthias; Plänitz, Philipp; Meichsner, Gunnar

In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 117 (2023), S. 231-236

Publikationslink

Integrated biophysical matching of bacterial nanocellulose coronary artery bypass grafts towards bioinspired artery typical functions

Hülsmann, Jörn; Fraune, Theresa; Dodawatta, Baratha; Reuter, Fabian; Beutner, Martin; Beck, Viktoria; Hackert-Oschätzchen, Matthias; Ohl, Claus-Dieter; Bettenbrock, Katja; Janiga, Gábor; Wippermann, Jens; Wacker, Max

In: Scientific reports - [London] : Macmillan Publishers Limited, part of Springer Nature, Bd. 13 (2023), Artikel 18274, insges. 12 S.

Publikationslink

Steigerung des Torsionswiderstands der Konussteckverbindung durch einen angepassten Fertigungsprozess der CoCrMo Hüftkugel

Döring, Joachim; Voropai, Vadym; Thielecke, Alexander; Maiß, Oliver; Müller, Markus; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Häberle, Jürgen; Lohmann, Christoph H.; Bertrand, Jessica

In: Kongress: 12. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB), Köln, 28.-30. September 2022, 12. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB) - Köln : Deutsche Gesellschaft für Biomechanik ; Potthast, Wolfgang *1967-* . - 2022, S. 203, Artikel P27

Publikationslink

How to optimize coronary artery bypass graft prosthesis based on bacterial nanocellulose

Hülsmann, Jörn; Reuter, Fabian; Beutner, Martin; Wacker, Max; Hackert-Oschätzchen, Matthias; Ohl, Claus-Dieter; Bettenbrock, Katja; Janiga, Gábor; Scherner, Maximilian Philipp; Wippermann, Jens

In: 5th International Symposium on Bacterial Cellulose , 2022 - Jena ; Bismarck, Alexander, S. 31

Publikationslink

Improving the biofunctionality of bacterial nanocellulose hydrogel scaffolds by bioprocessing strategies

Hülsmann, Jörn; Reuter, Fabian; Beutner, Martin; Fraune, Theresa; Beck, Viktoria; Wacker, Max; Hackert-Oschätzchen, Matthias; Ohl, Claus-Dieter; Bettenbrock, Katja; Scherner, Maximilian Philipp; Wippermann, Jens

In: Konferenz: 32nd Annual Conference of the European Society for Biomaterials, Bordeaux, France, 4. - 8. September 2022, 32th Annual conference of the European Society for Biomaterials, ESB 2022 - European Society for Biomaterials

Publikationslink

Comparison of electrochemical removal characteristics between magnetized and demagnetized NdFeB

Loebel, Sascha; Petzold, Tom; Martin, André; Steinert, Philipp; Schubert, Andreas; Thielecke, Alexander; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Schulze, Robin

In: 18th International Symposium on Electrochemical Machining Technology 2022 (INSECT 2022) - Tokyo ; Koyano, Tomohiro, S. 51-56

Jet electrochemical machining simulation of intersecting line removals with adjustable nozzle diameter by a finite area element grid

Wienand, Tobias; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias

In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 102 (2021), S. 349-354

Publikationslink

Non-destructive evaluation of mechanical properties of additive manufactured plastic parts by practical application of DIN SPEC 17028:2021-04

Grießbach, Sören; Hackert-Oschätzchen, Matthias; Kausch, Martin; Grießbach, Jörg

In: Konferenz: ASTM International Conference on Additive Manufacturing, ASTM ICAM 2021, online, November 1-5, 2021, ASTM International Conference on Additive Manufacturing - ASTM International Additive Manufacturing Center of Excellence . - 2021

Additive Fertigung - Methode zur zerstörungsfreien Ermittlung von mechanischen Eigenschaften von additiv gefertigten Kunststoffteilen

Grießbach, Jörg; Kausch, Martin; Grießbach, Sören; Ewert, Uwe; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Noack, Björn

In: DIN SPEC 17028:2021-04, Beuth Verlag GmbH

Publikationslink

Transient removal simulation of the jet electrochemical machining process based on a finite area element grid

Wienand, Tobias; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias

In: International Symposium on Electrochemical Machining Technology INSECT 2020: proceedings : November 24-25, 2020/ International Symposium on Electrochemical Machining Technology - [Chemnitz]: Professorship Micromanufacturing Technology, Chemnitz University of Technology; Schubert, Andreas . - 2020, S. 105-116 - (Scripts precision and microproduction engineering; volume 14)

Experimental characterization of resource efficient process chains for electrochemical precision machining of form-bore patterns

Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias

In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 95 (2020), S. 748-753

Publikationslink

Experimental analysis of the shape accuracy in electrochemical polishing of femoral heads for hip endoprosthesis

Döbberthin, Christin; Müller, Rico; Meichsner, Gunnar; Welzel, Florian; Hackert-Oschätzchen, Matthias

In: Procedia manufacturing - Amsterdam [u.a.]: Elsevier, Bd. 47 (2020), S. 719-724

Publikationslink

Random sequential simulation of the resulting surface roughness in plasma electrolytic polishing of stainless steel

Danilova, Igor; Paul, Raphael; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Quitzke, Susanne; Schubert, Andreas

In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 95 (2020), S. 981-986

Publikationslink

Working gap analysis in electrochemical precision machining of external geometries with ring cathodes

Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Steinert, Philipp; Schubert, Andreas

In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 95 (2020), S. 662-667

Publikationslink

Experimental study on micro forming of structured surfaces for high static friction connection elements

Schaarschmidt, Ingo; Steinert, Philipp; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas; Jungblut, Guido

In: Procedia manufacturing - Amsterdam [u.a.]: Elsevier, Bd. 47 (2020), S. 1230-1234

Publikationslink

Experimental Characterisation of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation

Berger, Thomas; Herzig, Mathias; Hackert-Oschätzchen, Matthias; Schulze, Hans-Peter; Martin, André; Kröning, Oliver; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2020, Bd. 95, S. 505-510

Publikationslink

Process design for jet plasma electrolytic polishing of stainless steel

Quitzke, Susanne; Martin, André; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Schubert, Andreas

In: International Symposium on Electrochemical Machining Technology INSECT 2019: proceedings : November 14-15, 2019, Institute of Production Engineering, Saarland University, Saarbrücken, Germany / editors: Dirk Bähre, Alexander Ernst: proceedings : November 14-15, 2019, Institute of Production Engineering, Saarland University, Saarbrücken, Germany/ International Symposium on Electrochemical Machining Technology - Saarbrücken: Institute of Production Engineering, 2019 . - 2019, S. 125-132[Symposium: 15th International Symposium on Electrochemical Machining Technology, Saarbrücken, November 14 - 15, 2019]

Simulation-based Design of an Electrolyte System for Electrochemical Machining with Differentially Switched Currents

Petzold, Tom; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas

In: Proceedings of the 6th International Conference on Competitive Manufacturing, 2019, ISBN: 978-0-7972-1779-9

Deburring and Edge Shaping by Electrochemical Machining with Differentially Switched Currents ...

Petzold, Tom; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas

In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN: 978-3-00-064086-5

Removal rate and surface roughness in plasma-electrolytic polishing of 1.4441 stainless steel

Schröder, Sam; Martin, André; Kahle, Vincent; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5

Modelling of Precise Electrochemical Machining for Nickel-based Centrifugal Impellers

Loebel, Sascha; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Petzold, Tom; Zinecker, Mike; Schubert, Andreas

In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5

Process Design for Jet Plasma electrolytic Polishing of Stainless Steel

Quitzke, Susanne; Martin, André; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Schubert, Andreas

In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5

Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology

Danilov, Igor; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Meichsner, Gunnar; Edelmann, Jan; Schubert, Andreas

In: Micromachines, MDPI AG, 2019, Bd. 10, Heft 3, S. 214

Publikationslink

3D Multiphysics Simulation of Jet Electrochemical Machining of Intersecting Line Removals

Paul, Raphael; Hackert-Oschätzchen, Matthias; Danilov, Igor; Zanjani, Matin Yahyavi; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 196-201

Publikationslink

Localized anodization of the aluminum alloy EN AW-7075 T6 by closed electrolytic free jet

Morgenstern, Roy; Martin, André; Lehnert, Norbert; Scharf, Ingolf; Hackert-Oschätzchen, Matthias; Schubert, Andreas; Lampke, Thomas

In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2019, Bd. 480, S. 012015

Publikationslink

Multiphysics Simulation of Oxide Layer Growth in Localized Anodization of Aluminum Applying a Free-Surface Electrolyte Jet

Hackert-Oschätzchen, Matthias; Paul, Raphael; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 243-248

Publikationslink

Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density

Yahyavi Zanjani, Matin; Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Edelmann, Jan; Schubert, Andreas

In: Micromachines, MDPI AG, 2019, Bd. 10, Heft 4, S. 261

Publikationslink

Implementation of the Machine Tool-Specific Current and Voltage Control Characteristics in Multiphysics Simulation of Electrochemical Precision Machining

Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 237-242

Publikationslink

Micro product and process fingerprints for zero-defect net-shape micromanufacturing

Tosello, G.; Gulcur, M.; Whiteside, B.; Coates, P.; Luca, A.; De Sousa Lia Fook, P.V.; Riemer, O.; Danilov, I.; Zanjani, M.Y.; Hackert-Oschätzchen, M.; Schubert, A.; Baruffi, F.; Achour, S.B.; Calaon, M.; Nielsen, C.V.; Bissacco, G.; Cannella, E.; Rasmussen, A.; Bellotti, M.; Saxena, K.; Qian, J.; Reynaerts, D.; Santoso, T.; Syam, W.; Leach, R.; Kose, S.K.; Parenti, P.; Annoni, M.; Cai, Y.; Luo, X.; Qin, Y.; Zeidler, H.

In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, S. 98-99, 2019

Characterization of the Lateral Working Distance in Precise Electrochemical Machining of Differently Heat Treated Steel

Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Loebel, Sascha; Boenig, Lothar; Schubert, Andreas; Putz, Matthias

In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Experimental Derivation of Process In-put Parameters for Electrochemical Machining with Differentially Switched Currents

Martin, André; Petzold, Tom; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Simulationsbasierte Gestaltung von elektrochemischen Abtragprozessen für hochfeste Materialien

Loebel, Sascha; Hackert-Oschätzchen, Matthias; Paul, Raphael; Meichsner, Gunnar; Schubert, Andreas

In: Tagungsband zum 1. Kolloquium der sächsischen Allianz für Material- und ressourceneffiziente Technologien, Verlag Wissenschaftliche Scripten, 2018, ISBN 978-3-95735-091-6

Simulation-based Design of Electrochemical Machining Processes for Microstructuring of High-strength Materials

Loebel, Sascha; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas

In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Design of a Test Rig for Local Surface Modification by Jet Plasma Electrolytic Polishing

Quitzke, Susanne; Kröning, Oliver; Martin, André; Hackert-Oschätzchen, Matthias; Schulze, Hans-Peter; Kranhold, Christian; Zeidler, Henning; Schubert, Andreas

In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5

Surface structuring of boron doped CVD diamond by micro electrical discharge machining

Schubert, Andreas; Berger, Thomas; Martin, André; Hackert-Oschätzchen, Matthias; Treffkorn, Nico; Kühn, Ralf

In: AIP Conference Proceedings 1960, 2018

Publikationslink

Design of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation

Berger, Thomas; Schulze, Hans-Peter; Hackert-Oschätzchen, Matthias; Herzig, Mathias; Kröning, Oliver; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 678-683

Publikationslink

Study on the Influence of the Processing Speed in the Generation of Complex Geometries in Aluminium Matrix Composites by Electrochemical Precision Machining

Lehnert, Norbert; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 713-718

Publikationslink

Analysis of the fundamental removal geometry in electrochemical profile turning with continuous electrolytic free jet

Martin, André; Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 466-470

Publikationslink

Derivation of Guidelines for Reliable Finishing of Aluminium Matrix Composites by Jet Electrochemical Machining

Lehnert, Norbert; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 471-476

Publikationslink

Numerical Investigation of Electrolyte Flow in a Multi-Cathode System for Electrochemical Machining

Penzel, Michael; Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2018

Simulation-based Analysis of a Microstructuring Process for Serrated Surfaces with Higher Friction

Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Steinert, Philipp; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2018

Multiphysics simulation of localised anodisation of aluminium

Lehnert, Norbert; Martin, André; Mwangi, James W.; Hackert-Oschätzchen, Matthias; Schubert, Andreas; Morgenstern, Roy; Lampke, Thomas

In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018, S. 429-430, 2018

Transient Simulation of the Removal Process in Plasma Electrolytic Polishing of Stainless Steel

Danilov, Igor; Hackert-Oschätzchen, Matthias; Schaarschmidt, Ingo; Zinecker, Mike; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2018

Elektrochemisches Abtragen im Freistrahl

Schubert, Andreas; Martin, André; Yahyavi Zanjani, Matin; Hackert-Oschätzchen, Matthias

In: Mikroproduktion, 6:34-39, 2018

Methode zur Bestimmung von Prozesseingangsgrößen für das elektrochemische Präzisionsabtragen - Anforderungen, Kriterien, Festlegungen

Meichsner, Gunnar; Köppl, Alois; Wengerek, Stephan; Schulze, Robin; Hackert-Oschätzchen, Matthias

In: DIN SPEC 91399:2018-12, Beuth Verlag GmbH

Publikationslink

Evaluation of On-Machine Gap Measurement Strategies in Jet-Electrochemical Machining

Yahyavi Zanjani, Matin; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas

In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Analysis of the Removal Geometry in Electrochemical Straight Turning with Continuous Electrolytic Free Jet

Martin, André; Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Schubert, Andreas

In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Reduplication of Precise Internal Geometries by Pulsed Electrochemical Machining

Meichsner, Gunnar; Petzold, Tom; Hackert-Oschätzchen, Matthias; Edelmann, Jan; Schubert, Andreas; Putz, Matthias; Hahn, Georg

In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with silicon

Kühn, Ralf; Berger, Thomas; Prieske, Markus; Börner, Richard; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Schubert, Andreas

In: AIP Conference Proceedings, Volume 1896, 2017

Publikationslink

Modification of the process dynamics in micro-EDM by means of an additional piezo-control system

Herzig, Mathias; Berger, Thomas; Schulze, Hans-Peter; Hackert-Oschätzchen, Matthias; Kröning, Oliver; Schubert, Andreas

In: AIP Conference Proceedings 1896, 2017

Publikationslink

Development of Interfaces for Material Data Integration in Models of Electrochemical Machining Processes

Loebel, Sascha; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3

Localised anodic oxidation of aluminium material using a continuous electrolyte jet

Kuhn, Danny; Martin, André; Eckart, Christian; Sieber, Maximilian; Morgenstern, Roy; Hackert-Oschätzchen, Matthias; Lampke, Thomas; Schubert, Andreas

In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017, Bd. 181, S. 012042

Publikationslink

Downscaled anodic oxidation process for aluminium in oxalic acid

Sieber, Maximilian; Morgenstern, Roy; Kuhn, Danny; Hackert-Oschätzchen, Matthias; Schubert, Andreas; Lampke, Thomas

In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017, Bd. 181, S. 012044

Publikationslink

Multiscale Multiphysics Simulation of a Pulsed Electrochemical Machining Process with Oscillating Cathode for Microstructuring of Impact Extrusion Punches

Schaarschmidt, Ingo; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2017, Bd. 58, S. 257-262

Publikationslink

Characterization of an Electrochemical Machining Process for Precise Internal Geometries by Multiphysics Simulation

Hackert-Oschätzchen, Matthias; Paul, Raphael; Kowalick, Michael; Kuhn, Danny; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2017, Bd. 58, S. 175-180

Publikationslink

Investigation of Forced Convection in Pin Structured Cold Plates for Improved Heat Transfer and Heat Spreading

Penzel, Michael; Zinecker, Mike; Schubert, Andreas; Hackert-Oschätzchen, Matthias; Ludwig, Andreas; Adamczewski, A.; Schulz, Andreas; Lausberg, Martin

In: Proceedings of the 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2017

Analysis of Mixing Chambers for the Processing of Two-component Adhesives for Transport Applications

Steinert, Philipp; Paul, Raphael; Schaarschmidt, Ingo; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Muschalek, Thomas; Esslinger, Jürgen; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2017

Multiscale Model of the PECM with Oscillating Cathode for External Geometries using a Virtual Switch

Schaarschmidt, Ingo; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2017

Approximation of the Flow Field in Electrochemical Machining Incorporating Pressure Drop Calculation

Paul, Raphael; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2017

Microstructuring of Joining Areas in Aluminum Alloy Sheets by Jet Electrochemical Machining

Schimmelpfennig, René; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas

In: Technologies for Lightweight Structures, Volume 1, 2017, S. 17-25

Experimental Derivation of Processing Strategies for Electrochemical Precision Machining of Aluminium Matrix Composites

Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Meichsner, Gunnar; Scherf, Christina; Martin, André; Schubert, Andreas

In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

3D CFD Simulation of Electrochemical Machining Based on Dissolving Characteristics within the SIREKA Joint Research Project

Spille-Kohoff, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Schulze, Robin; Busan, Stefan

In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

Design and Realisation of a Specific Device for Jet Electrochemical Machining of Rotating Work Pieces

Martin, André; Kuhn, Danny; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

Removal Characteristic of Stainless Steel in Pulsed Electrochemical Machining

Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Petzold, Tom; Krönert, Maik; Edelmann, Jan; Schubert, Andreas

In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7

Jet Electrochemical Machining of Particle Reinforced Aluminum Matrix Composites with Different Neutral Electrolytes

Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Martin, André; Schubert, Andreas

In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2016, Bd. 118, S. 012036

Publikationslink

Generation of Defined Surface Waviness on Tungsten Carbide by Jet Electrochemical Machining with Pulsed Current

Martin, André; Eckart, Christian; Lehnert, Norbert; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2016, Bd. 45, S. 231-234

Publikationslink

Surface Characterization of Particle Reinforced Aluminum-matrix Composites Finished by Pulsed Electrochemical Machining

Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Martin, André; Meichsner, Gunnar; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2016, Bd. 45, S. 351-354

Publikationslink

Generation of Complex Surfaces by Superimposed Multi-dimensional Motion in Electrochemical Machining

Schubert, Andreas; Hackert-Oschätzchen, Matthias; Martin, André; Winkler, Sebastian; Kuhn, Danny; Meichsner, Gunnar; Zeidler, Henning; Edelmann, Jan

In: Procedia CIRP, Elsevier BV, 2016, Bd. 42, S. 384-389

Publikationslink

Investigation of Ablation Behaviour in Micro-EDM of Nonconductive Ceramic Composites ATZ and Si3N4-TiN

Schubert, Andreas; Zeidler, Henning; Kühn, Ralf; Hackert-Oschätzchen, Matthias; Flemmig, Sebastian; Treffkorn, Nico

In: Procedia CIRP, Elsevier BV, 2016, Bd. 42, S. 727-732

Publikationslink

Evaluation of the Technical-Economic Potential of Particle- Reinforced Aluminum Matrix Composites and Electrochemical Machining

Schubert, Andreas; Götze, Uwe; Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Herold, Franziska; Meichsner, Gunnar; Schmidt, Anja

In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2016, Bd. 118, S. 012035

Publikationslink

Fast Determination of the Material Removal Characteristics in Pulsed Electrochemical Machining

Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Edelmann, Jan; Schubert, Andreas; Putz, Matthias

In: Procedia CIRP, Elsevier BV, 2016, Bd. 46, S. 123-126

Publikationslink

2-D Axisymmetric Simulation of the Electrochemical Machining of Internal Precision Geometries

Hackert-Oschätzchen, Matthias; Kowalick, Michael; Paul, Raphael; Zinecker, Mike; Kuhn, Danny; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2016

Transient Simulation of an Electrochemical Machining Process for Stamping and Extrusion Dies

Hackert-Oschätzchen, Matthias; Penzel, Michael; Kreissig, Markus; Kowalick, Michael; Zinecker, Mike; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2016

Analysis of an Electrochemical Machining Process for Particle Reinforced Aluminium Matrix Composites

Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Kowalick, Michael; Scherf, Christina; Martin, André; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2016

Analysis of a PECM Electrode Concept for Micro Injection Moulds by Multiphysics Simulation

Zeidler, Henning; Martin, André; Kowalick, Michael; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: Proceedings of the 4M/ICOMM2015 Conference, Research Publishing Services, 2015

Publikationslink

Endformgebung von hochfesten, partikelverstärkten Aluminiummatrix-Verbundwerkstoffen (AMCs) durch elektrochemisches Abtragen

Schubert, Andreas; Hackert-Oschätzchen, Matthias; Lehnert, Norbert

In: DGM-Magazin dIALOG, Ausgabe 4, 2015, S. 104107, ISSN 2193:3383

Characterisation of the Influence of Material Hardness in Precise Electrochemical Machining of Steel

Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Edelmann, Jan; Schubert, Andreas; Hahn, Georg; Putz, Matthias

In: Proceedings of the 17th International Conference on the Strength of Materials (ICSMA 17), 2015, ISBN 978-80-87434-07-9

Quantification of the gas development in the electrochemical precision erosion [Quantifizierung der Gasentwicklung beim elektrochemischen Präzisionsabtragen]

Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Matthias; Petzold, Tom; Edelmann, Jan; Schubert, Andreas

In: Galvanotechnik, Bd. 106, 3, S. 484-489, 2015

Study on the dynamic generation of the jet shape in Jet Electrochemical Machining

Hackert-Oschätzchen, Matthias; Paul, Raphael; Martin, André; Meichsner, Gunnar; Lehnert, Norbert; Schubert, Andreas

In: Journal of Materials Processing Technology, Elsevier BV, 2015, Bd. 223, S. 240-251

Publikationslink

Micro Electrical Discharge Machining of Tungsten Carbide with Ultra-Short Pulse

Kröning, Oliver; Herzig, Mathias; Hackert-Oschätzchen, Matthias; Kühn, Ralf; Zeidler, Henning; Schubert, Andreas

In: Key Engineering Materials, Trans Tech Publications, Ltd., 2015, Bd. 651-653, S. 759-764

Publikationslink

Multiphysics Simulation of the Material Removal in Jet Electrochemical Machining

Hackert-Oschätzchen, Matthias; Paul, Raphael; Kowalick, Michael; Martin, André; Meichsner, Gunnar; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2015, Bd. 31, S. 197-202

Publikationslink

Basic Research on Electrochemical Machining of Particle Reinforced Aluminium Matrix Composites

Hackert-Oschätzchen, Matthias; Morgenstern, Roy; Lehnert, Norbert; Martin, André; Lampke, Thomas; Schubert, Andreas

In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015

Optimized design of electrochemical machining processes by a combination of 3D simulation and rapid prototyping of cathodes

Spille-Kohoff, Andreas; Schulze, Robin; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Busan, Stefan

In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015

Gestaltung von elektrochemischen Abtragprozessen durch Multiphysiksimulation gezeigt an der Endformgebung von Mikrobohrungen (Habilitationsschrift)

Hackert-Oschätzchen, Matthias

In: Schubert, A. (Hrsg.): Scripts Precision and Microproduction Engineering, Band 10. Verlag Wissenschaftliche Scripten, 2015, ISBN 978-3-95735-028-2

An investigation into the influence of micro structures on nucleate boiling processes

Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas

In: Advanced Computational Methods and Experiments in Heat Transfer XIII, WIT Press, 2014

Publikationslink

Determination of the gas generation during precise electrochemical machining

Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Petzold, Tom; Edelmann, Jan; Schubert, Andreas

In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, Editors: D. Bähre, A. Rebschläger, ISBN 978-3-95735-010-7

Evaluation of Gap Control Strategies in Jet Electrochemical Machining on Defined Shape Deviations

Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, Editors: D. Bähre, A. Rebschläger, ISBN 978-3-95735-010-7

Electro-chemical precision machining of rotating workpieces [Elektrochemisches Präzisionsabtragen rotierender Werkstücke]

Hackert-Oschätzchen, Matthias; Boenig, Lothar; Meichsner, Gunnar; Zinecker, Mike; Krönert, Maik; Martin, André; Schubert, Andreas

In: Galvanotechnik, Bd. 105, 3, S. 462-467, 2014

Resource-Efficient Machining of Hard Metals

Kroening, Oliver; Herzig, Mathias; Schulze, Hans Peter; Hackert-Oschätzchen, Matthias; Kühn, Ralf; Zeidler, Henning; Schubert, Andreas

In: Key Engineering Materials, 2014, S. 708-714, ISSN 1662-9795, 10.4028/www.scientific.net/KEM.611-612.708

Publikationslink

Resource-efficient configuration of precise electrochemical ablation processes [Ressourceneffiziente gestaltung des elektrochemischen Präzisionsabtragens]

Schubert, Andreas; Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Maik

In: Galvanotechnik, Bd. 105, 4, S. 703-709, 2014

Electrochemical machining of hard metals - WC/Co as example

Lohrengel, Manuel M.; Rataj, Kamil P.; Schubert, Nora; Schneider, Michael; Höhn, Sören; Michaelis, Alexander; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas

In: Powder Metallurgy, Bd. 57, 1, S. 21-30, 2014

Publikationslink

Jet-Electrochemical machining of selective laser melted aluminum and steel alloys for micro injection moulds

Schubert, Andreas; Zeidler, Henning; Martin, André; Hackert-Oschätzchen, Matthias; Kempen, Karolien; Kruth, Jean-Pierre

In: Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, Bd. 2, S. 367-370, 2014

Transient Simulation of the Electrolyte Flow in a Closed Device for Precise Electrochemical Machining

Hackert-Oschätzchen, Matthias; Penzel, Michael; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2014

Analysis of the Electrochemical Removal of Aluminium Matrix Composites Using Multiphysics Simulation

Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2014

Analysis of strategies for gap control in jet electrochemical machining

Hackert-Oschätzchen, Matthias; Martin, Martin; Meichsner, Gunnar; Schubert, Andreas

In: Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, Bd. 2, S. 439-442, 2014

Application of nucleate boiling with micro structured surfaces for electronic cooling

Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas

In: PCIM Europe Conference Proceedings, S. 1141-1148, 2014

Elektrochemisches Präzisionsabtragen - neue Möglichkeiten zur Formgebung schwer bearbeitbarer Werkstoffe

Winkler, Sebastian; Edelmann, Jan; Schubert, Andreas; Hackert-Oschätzchen, Matthias

In: Ingenieur-Spiegel, 2014, Nr. 3, S. 84-85, ISSN: 1868-5919

Jet Electrochemical Machining of Selective Laser Sintered Metals for Micro Injection Moulds

Zeidler, Henning; Martin, André; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Edge Rounding of Micro Bores by Inverse Jet Electrochemical Machining

Hommel, Bernd; Jähn, Frank; Scharrnbeck, Matthias; Garn, Rüdiger; Lenk, Andreas; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Resource-Efficient Design of Precise Electrochemical Machining

Schubert, Andreas; Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Edelmann, Jan

In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Precise Electrochemical Machining of Rotating Workpieces

Hackert-Oschätzchen, Matthias; Boenig, Lothar; Meichsner, Gunnar; Zinecker, Zinecker; Krönert, Maik; Schubert, Andreas

In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3

Microstructuring of carbide metals applying Jet Electrochemical Machining

Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas

In: Precision Engineering, Elsevier BV, 2013, Bd. 37, Heft 3, S. 621-634

Publikationslink

Micro-patterning of hard metals by electrochemical machining using closed-loop jet - Part 1 [Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl: Teil 1]

Hackert-Oschätzchen, Matthias; Martin, André; Kühn, Ralf; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas

In: Galvanotechnik, Bd. 104, 6, S. 1133-1144, 2013

Micro-patterning of hard metals by electrochemical machining using closed-loop jet - Part 2 [Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl: Teil 2]

Hackert-Oschätzchen, Matthias; Martin, André; Kühn, Ralf; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas

In: Galvanotechnik, Bd. 104, 7, S. 1308-1321, 2013

Micro-EDM Milling of Electrically Nonconducting Zirconia Ceramics

Schubert, Andreas; Zeidler, Henning; Hahn, Martin; Hackert-Oschätzchen, Matthias; Schneider, Jörg

In: Procedia CIRP, Elsevier BV, 2013, Bd. 6, S. 297-302

Publikationslink

Inverse Jet Electrochemical Machining for Functional Edge Shaping of Micro Bores

Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Kowalick, Michael; Zeidler, Henning; Schubert, Andreas

In: Procedia CIRP, Elsevier BV, 2013, Bd. 6, S. 378-383

Publikationslink

Simulation of Heat Transfer on Periodic Microstructured Surfaces for Evaporation Cooling

Hackert-Oschätzchen, Matthias; Paul, Raphael; Penzel, Michael; Zinecker, Mike; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2013

Single Discharge Simulations of Needle Pulses for Electrothermal Ablation

Hackert-Oschätzchen, Matthias; Kreissig, Markus; Kowalick, Michael; Zeidler, Henning; Schubert, Andreas; Kröning, Oliver; Herzig, Mathias; Schulze, Hans-Peter

In: Proceedings of the European COMSOL Conference 2013

Determining of micro structuring technologies for nucleate boiling surfaces

Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas

In: Proceedings of the 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2013

Energy-efficient cooling using microstructures for nucleate boiling process

Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas

In: PCIM Europe Conference Proceedings, S. 1036-1041, 2013

2D Axisymmetric Simulation of the Electrochemical Finishing of Micro Bores by Inverse Jet Electrochemical Machining

Hackert-Oschätzchen, Matthias; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas; Hommel, Bernd; Jähn, Frank; Scharrnbeck, Matthias; Garn, Rüdiger; Lenk, Andreas

In: Proceedings of the European COMSOL Conference 2013

Multiphysics Simulation of the Electrochemical Finishing of Micro Bores

Hackert-Oschätzchen, Matthias; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2012, ISBN 978-0-9839688-7-0

Micro Wire Cutting by Pulsed Electrochemical Machining

Schubert, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Martin, André; Edelmann, Jan

In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6

Edge rounding of EDM micro bores using a plasma electrolytic polishing process

Schubert, Andreas; Zeidler, Henning; Meyer, Wolfgang; Unger, M.; Hackert-Oschätzchen, Matthias

In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6

Pseudo-3D Multiphysics Simulation of a Hydride Vapor Phase Epitaxy Reactor

Hackert-Oschätzchen, Matthias; Penzel, Michael; Plänitz, Philipp; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2012, ISBN 978-0-9839688-7-0

Effect of Tungsten Carbide Grain Size in Jet Electrochemical Machining

Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6

Manufacturing of Tribologically Optimized Surfaces for Powertrain Applications

Schubert, Andreas; Steinert, Philipp; Schmidt, Torsten; Hackert-Oschätzchen, Matthias

In: Key Engineering Materials, Trans Tech Publications, Ltd., 2012, Bd. 523-524, S. 799-804

Publikationslink

Evaluation of the influence of the electrical voltage in the Jet-ECM [Evaluierung des einflusses des elektrischen potenzials beim Jet-ECM]

Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Martin, André; Schubert, Andreas

In: Galvanotechnik, Bd. 103, 6, S. 1196-1200, 2012

Micro machining with continuous electrolytic free jet

Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Martin, André; Schubert, Andreas

In: Precision Engineering, Elsevier BV, 2012, Bd. 36, Heft 4, S. 612-619

Publikationslink

Fast micromilling with jet electrochemical machining

Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Martin, André; Zeidler, Henning; Schubert, Andreas

In: 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, S. 54-55, 2012

Functional edge shaping of micro bores by applying Electrochemical Machining

Schubert, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Zeidler, Henning

In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 420-423, 2012

Micro structuring of carbide metals with jet electrochemical machining

Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Schubert, Andreas

In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 528-532, 2012

Micro Structured Surfaces for Thermodynamic Applications

Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Edelmann, Jan

In: Proceedings of the euspen 3rd Topical Meeting - Structured and Freeform Surfaces, 2012

Ultrasonic-assisted micro-EDM of deep bores: Process and discharge analysis

Schubert, Andreas; Zeidler, Henning; Wolf, Nicolas; Hackert-Oschätzchen, Matthias; Schneider, Jörg

In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 391-394, 2012

Accelerated precision manufacturing through electro discharge machining with ultrasonic vibration assistance

Zeidler, Henning; Hahn, Martin; Schneider, Jörg; Hackert-Oschätzchen, Matthias; Schubert, Andreas

In: 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, S. 56-57, 2012

Pulsed Electrochemical Machining of Powder Metallurgy Steels

Schubert, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Edelmann, Jan

In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, CEST Centre of Electrochemical Surface Technology, 2011, Editors: B. Mollay, M.M. Lohrengel, ISBN 978-3-00-036247-7

Evaluation of the Influence of the Electric Potential in Jet Electrochemical Machining

Schubert, Andreas; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Martin, André

In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, CEST Centre of Electrochemical Surface Technology, 2011, Editors: B. Mollay, M.M. Lohrengel, ISBN 978-3-00-036247-7

Design of Electrochemical Machining Processes by Multiphysics Simulation

Hackert-Oschätzchen, Matthias; Jahn, Stephan F.; Schubert, Andreas

In: Proceedings of the European COMSOL Conference 2011

Precision and Micro ECM with Localized Anodic Dissolution

Schubert, Andreas; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Edelmann, Jan

In: Proccedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Editor: J.M. Slabe, ISBN 978-961-6692-02-1

Ultrasonic Assistance and Nonconductive Materials: Shifting the Boundaries of Micro-EDM

Schubert, Andreas; Zeidler, Henning; Wolf, Nicolas; Hackert-Oschätzchen, Matthias; Schneider, Jörg

In: Proccedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Editor: J.M. Slabe, ISBN 978-961-6692-02-1

Design and realization of micro structured surfaces for thermodynamic applications

Schubert, Andreas; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike

In: Microsystem Technologies, Springer Science and Business Media LLC, 2011, Bd. 17, Heft 9, S. 1471-1479

Publikationslink

Micro machining of different steels with closed electrolytic free jet

Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zeidler, Henning; Zinecker, Mike; Schubert, Andreas

In: AIP Conference Proceedings, Bd. 1353, S. 1337-1343, 2011

Publikationslink

Structuring of tribological active surfaces for reduction of frictional losses

Schubert, Andreas; Edelmann, Jan; Sylla, David; Hackert-Oschätzchen, Matthias

In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 2, S. 156-159, 2011

Precision turning with localized anodic dissolution

Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas

In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 2, S. 513-517, 2011

Study on the influence of the forming velocity in micro impact extrusion with modular dies

Schubert, Andreas; Jahn, Stephan F.; Müller, Benedikt; Hackert-Oschätzchen, Matthias

In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 1, S. 20-24, 2011