Publikationen
2025
Begutachteter Zeitschriftenartikel
In-service and repair welding of pressurized hydrogen pipelines - a review on current challenges and strategies
Erxleben, Kjell; Kaiser, Sebastian; Rhode, Michael; Kannengießer, Thomas; Kromm, Arne
In: Welding in the world - Berlin : Springer, Bd. 69 (2025), Heft 10, S. 3141-3164
Influence of heat control on properties and residual stresses of additive-welded high-strength steel components
Scharf-Wildenhain, Ronny; Haelsig, André; Hensel, Jonas; Wandtke, Karsten; Schoepfer, Dirk; Kromm, Arne; Kannengießer, Thomas
In: Metals - Basel : MDPI, Bd. 12 (2025), Heft 6, Artikel 951, insges. 10 S.
Effect of Ti microalloying on the local strain behavior of cross-weld tensile samples determined by digital image correlation
Schroeder, Nina; Rhode, Michael; Kannengießer, Thomas; Kromm, Arne; Kadoke, Daniel; Kruse, Julius
In: Welding in the world - Berlin : Springer, Bd. 70 (2026), Heft 9, S. 4217-4233
Residual stress reduction using a low transformation temperature welding consumable with focus on the weld geometry
Hübner, Martin; Dittmann, Florian; Kromm, Arne; Varfolomeev, Igor; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 69 (2025), Heft 10, S. 3129-3139
Assessing ferrite content in duplex stainless weld metal - WRC ‘92 predictions vs. practical measurements
Quackatz, Lukas; Westin, Elin Marianne; Griesche, Axel; Kromm, Arne; Kannengiesser, Thomas; Treutler, Kai; Wesling, Volker; Wessman, Sten
In: Welding in the world - Berlin : Springer, Bd. 69 (2025), S. 31-45
Effect of alloy modification on the wear protection coatings made of Ni- and Co-based materials and surface machinability via ultrasonic milling process
Willeke, Maraike; Giese, Marcel; Lorenz, Swenja; Treutler, Kai; Schröpfer, Dirk; Wesling, Volker; Kannengießer, Thomas
In: The international journal of advanced manufacturing technology - London : Springer, Bd. 136 (2025), Heft 5-6, S. 2541-2557
A force based determination of hot cracking susceptibility
Liepold, Philipp; Kromm, Arne; Kannengießer, Thomas
In: Journal of welding and joining - Seoul, Korea : The Korean Welding and Joining Society, Bd. 43 (2025), Heft 4, S. 447-457
Transvarestraint testing of high-strength steel filler metal
Liepold, Philipp; Kromm, Arne; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 69 (2025), Heft 10, S. 3071-3082
Combined heating rate and restraint condition effect on stress relief cracking during PWHT of thick-walled Cr–Mo-V steel SAW joints
Rhode, Michael; Czeskleba, Denis; Fleißner-Rieger, Hannah; Nietzke, Jonathan; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 69 (2025), Heft 10, S. 3097-3113
Investigation of restraint intensity influence on solidification cracking of high-strength filler materials in fillet welds via CTS testing
Liepold, Philipp; Kromm, Arne; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 69 (2025), Heft 10, S. 3083-3095
Effect of heat control on mechanical properties and residual stresses at the transition zone of component and substrate in hybrid DED-arc manufacturing
Scharf-Wildenhain, Ronny; Engelking, Lorenz; Haelsig, Andre; Schröpfer, Dirk; Kannengießer, Thomas; Hensel, J
In: Welding in the world - Berlin : Springer, Bd. 69 (2025), Heft 6, S. 1547-1561
Wissenschaftliche Monographie
Vermeidung von Kaltrissen in UP-Dickblechschweißungen aus hochfesten Stählen
Czeskleba, Denis; Rhode, Michael; Kannengießer, Thomas
In: Berlin: BAM, 2025, 1 Online-Ressource
Dissertation
In situ Untersuchung der Phasenverteilung und der Schmelzbaderstarrung von Duplexstählen mittels laser-induzierter Plasmaspektroskopie (LIBS)
Quackatz, Lukas; Kannengießer, Thomas
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2025, 1 Online-Ressource (iv, 118 Seiten, 8 MB) [Literaturverzeichnis: Seite 92-109][Literaturverzeichnis: Seite 92-109]
Understanding welding and machining properties of high- and medium entropy alloys - a study on CoCrFeMnNi and CoCrNi systems
Richter, Tim; Kannengießer, Thomas
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2025, 1 Online-Ressource (VII, 178 Blätter, 17,72 MB) [Literaturverzeichnis: Blatt 150-165]
Buchbeitrag
Herausforderungen beim Schweißen im Betrieb an Wasserstoff-Ferngasleitungen
Kaiser, Sebastian; Erxleben, Kjell; Rhode, Michael; Kannengießer, Thomas
In: Schweißen im Anlagen- und Behälterbau 2025 - Düsseldorf : DVS Media GmbH, S. 106-115 [DVS Congress 2024]
Reparaturschweißen zukünftiger, in Betrieb befindlicher Wasserstoffpipelines
Erxleben, Kjell; Kaiser, Sebastian; Rhode, Michael; Kannengießer, Thomas; Kromm, Arne
In: Schweißen im Anlagen- und Behälterbau 2025 - Düsseldorf : DVS Media GmbH, S. 341-349 [DVS Congress 2024]
Innovatives Instandsetzungsschweißen von Altstahl - Materialverhalten und Herausforderungen
Schröder, Nina; Kromm, Arne; Schröpfer, Dirk; Kannengießer, Thomas
In: Tagungsband 6. Symposium Materialtechnik , 2024 - Düren : Shaker Verlag . - 2025, S. 370-380 [Tagung: 6. Symposium Materialtechnik, Clausthal, 20. bis 21. Februar 2025]
Schweißen im Betrieb an Wasserstoff-Ferngasleitungen
Kaiser, Sebastian; Erxleben, Kjell; Rhode, Michael; Kannengießer, Thomas
In: Tagungsband 6. Symposium Materialtechnik , 2024 - Düren : Shaker Verlag . - 2025, S. 381-390 [Tagung: 6. Symposium Materialtechnik, Clausthal, 20. bis 21. Februar 2025]
Simulation of hydrogen distribution in submerged arc welded heavy plates as tool for evaluating cold cracking sensitivity for offshore structures
Rhode, Michael; Mente, Tobias; Kannengießer, Thomas; Czeskleba, Denis
In: Tagungsband 6. Symposium Materialtechnik , 2024 - Düren : Shaker Verlag . - 2025, S. 1-12 [Tagung: 6. Symposium Materialtechnik, Clausthal, 20. bis 21. Februar 2025]
Schweißverfahrensqualifikation an Stumpfnahtverbindungen aus Altstahl- und Feinkornbaustahl
Uhlig, Marvin; Schröder, Nina; Höfer, Kevin; Kromm, Arne; Kannengießer, Thomas; Hensel, Jonas
In: DVS Congress 2025 , 2025 - Düsseldorf : DVS Media GmbH ; Boecking, Roland, S. 1-17 - (DVS-Berichte; Band 401) [DVS Congress 2025, Essen, 16. bis 17. September 2025]
Wasserstoffdiffusion in hochfesten UP-Schweißverbindungen – einfacher als gedacht
Rhode, Michael; Czeskleba, Denis; Irfan, Muhammad Dary; Wandtke, Karsten; Kaiser, Sebastian; Kannengießer, Thomas
In: DVS Congress 2025 , 2025 - Düsseldorf : DVS Media GmbH ; Boecking, Roland, S. 330-340 - (DVS-Berichte; Band 401) [DVS Congress 2025, Essen, 16. bis 17. September 2025]
2024
Begutachteter Zeitschriftenartikel
Approach for the probabilistic fatigue assessment of welded joints based on the local geometry of the weld seam
Schubnell, Jan; Konidena, Sai Kumar; Jung, Matthias; Braun, Moritz; Ehlers, Sören; Madia, Mauro; Kannengießer, Thomas; Löschner, Daniel
In: Fatigue & fracture of engineering materials & structures - Oxford [u.a.] : Wiley-Blackwell, Bd. 47 (2024), Heft 1, S. 88-107
Parameters and challenges for reliable hydrogen determination in welded joints by carrier gas hot extraction
Rhode, Michael; Mente, T.; Kannengießer, Thomas
In: The Paton welding journal - Kiev : Paton Publishing House, Bd. 2024 (2024), Heft 4, S. 3-10
Influence of microalloying on precipitation behavior and notch impact toughness of welded high-strength structural steels
Schroeder, Nina; Rhode, Michael; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 68 (2024), Heft 10, S. 2647-2659
Challenges for testing hydrogen-assisted cold cracking in weld seams of high-strength steel grades
Rhode, Michael; Mente, T.; Kannengießer, Thomas; Schaupp, T.; Zavdoveev, A.
In: The Paton welding journal - Kiev : Paton Publishing House . - 2024, Heft 8, S. 3-9
Alloy modification and ultrasonic-assisted milling of wear-resistant alloys with defined surfaces
Giese, M.; Graebner, M.; Schroepfer, D.; Treutler, K.; Lorenz, S.; Kannengiesser, Thomas; Wesling, V.
In: Welding in the world - Berlin : Springer, Bd. 68 (2024), S. 2567-2575
In situ chemical analysis of duplex stainless steel weld by laser induced breakdown spectroscopy
Quackatz, Lukas; Gornushkin, Igor; Griesche, Axel; Kannengießer, Thomas; Treutler, Kai; Wesling, Volker
In: Spectrochimica acta. Part B, Atomic spectroscopy - Amsterdam [u.a.] : Elsevier, Bd. 214 (2024), Artikel 106899, insges. 7 S.
Stresses in repair welding of high-strength steels, part 2: heat control and stress optimization
Schröpfer, Dirk; Witte, Julien; Kromm, Arne; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 68 (2024), S. 2537-2551
Stresses in repair welding of high-strength steels, part 1: restraint and cold cracking risk
Schröpfer, Dirk; Witte, Julien; Kromm, Arne; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 68 (2024), S. 685-697
In situ measurement of hydrogen concentration in steel using laser-induced breakdown spectroscopy (LIBS)
Quackatz, L.; Griesche, A.; Nietzke, J.; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 68 (2024), S. 915-923
On the interpretation of Varestraint and Transvarestraint hot cracking test results
Kromm, Arne; Thomas, Maximillian; Kannengiesser, Thomas; Gibmeier, Jens
In: Welding in the world - Berlin : Springer, Bd. 68 (2024), S. 715-727
Dissertation
In situ measurements of chemical compositions during TIG-Welding by laser-induced breakdown spectroscopy
Taparli, Ugur Alp; Kannengießer, Thomas
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2024, 1 Online-Ressource (195 Blätter, 11,79 MB) [Literaturverzeichnis: Blatt 189-195][Literaturverzeichnis: Blatt 189-195]
Buchbeitrag
Repair welding of in-service hydrogen pipelines - concepts and challenges
Kaiser, Sebastian; Erxleben, Kjell; Rhode, Michael; Kannengiesser, Thomas
In: 2024 15 th Pipeline Conference. Volume 3: Operations, Monitoring, and Maintenance; Materials and Joining - New York : ASME, insges. 6 S. [Konferenz: 15th International Pipeline Conference, Calgary, Alberta, Canada, September 23–27, 2024]
Einfluss des Einspanngrades auf die Bildung von Erstarrungsrissen in Überlappverbindungen hochfester Stähle
Erxleben, Kjell; Kaiserr, Sebastian; Rhode, Michael; Kannengießer, Thomas; Kromm, Arne
In: DVS Congress 2024 , 1. Auflage 2024 - Düsseldorf : DVS Media GmbH, S. 341-349 - (Berichte Band; 395)
Einfluss des Einspanngrades auf die Bildung von Erstarrungsrissen in Überlappverbindungen hochfester Stähle
Leipold, Philipp; Kromm, Arne; Kannengießer, Thomas
In: DVS Congress 2024 , 1. Auflage 2024 - Düsseldorf : DVS Media GmbH, S. 193-200 - (Berichte Band; 395)
2023
Begutachteter Zeitschriftenartikel
Investigation of stress relief crack susceptibility of CrMoV steels coarse grain HAZ via simulation of uniaxial stress conditions during PWHT
Czeskleba, D.; Nietzke, J.; Rhode, Michael; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 67 (2023), Heft 9, S. 2133-2141
Thermodynamic prediction of precipitations behaviour in HAZ of a gas metal arc welded S690QL with varying Ti and Nb content
Schroeder, Nina; Rhode, Michael; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 67 (2023), Heft 9, S. 2143-2152
Rapid solidification during welding of duplex stainless steels - in situ measurement of the chemical concentration by Laser-Induced Breakdown Spectroscopy (LIBS)
Quackatz, L.; Griesche, A.; Kannengiesser, Thomas
In: IOP conference series / Materials science and engineering / Institute of Physics - London [u.a.] : Institute of Physics, Bd. 1274 (2023), Artikel 012018, insges. 9 S. [Konferenz: 6th International Conference on Advances in Solidification Processes (ICASP-6), Le Bischenberg, France, 19.06.-24.06.2022]
Influence of the WAAM process and design aspects on residual stresses in high-strength structural steels
Wandtke, K.; Schroepfer, D.; Scharf-Wildenhain, R.; Haelsig, A.; Kannengiesser, Thomas; Kromm, A.; Hensel, J.
In: Welding in the world - Berlin : Springer, Bd. 67 (2023), Heft 4, S. 987-996
Optimisation of surface residual stresses using ultrasonic-assisted milling for wire-arc additive manufactured Ni alloy components
Engelking, Lorenz; Eissel, Antonia; Schröpfer, Dirk; Treutler, Kai; Kannengießer, Thomas; Wesling, Volker
In: The international journal of advanced manufacturing technology - London : Springer, Bd. 126 (2023), Heft 9/10, S. 4191-4198
Component test for the assessment of delayed hydrogen-assisted cracking in thick-walled SAW joints for offshore applications
Rhode, Michael; Kromm, Arne; Mente, Tobias; Brackrock, Daniel; Czeskleba, Denis; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 68 (2024), Heft 3, S. 621-635
Alloy modification for additive manufactured Ni alloy components Part II: Effect on subsequent machining properties
Engelking, Lorenz; Schroepfer, Dirk; Kannengiesser, Thomas; Eissel, Antonia; Treutler, Kai; Wesling, Volker
In: Welding in the world - Berlin : Springer, Bd. 67 (2023), Heft 4, S. 1059-1066
Investigations on influencing the microstructure of additively manufactured Co-Cr alloys to improve subsequent machining conditions
Eissel, Antonia; Engelking, Lorenz; Treutler, Kai; Schroepfer, Dirk; Wesling, Volker; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 67 (2023), Heft 4, S. 1081-1089
Heat control and design-related effects on the properties and welding stresses in WAAM components of high-strength structural steels
Scharf-Wildenhain, Antonia; Haelsig, A.; Hensel, J.; Wandtke, K.; Schroepfer, Dirk; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 67 (2023), Heft 4, S. 955-965
Alloy modification for additive manufactured Ni alloy components, part I: effect on microstructure and hardness of Invar alloy
Eissel, Antonia; Engelking, Lorenz; Gustus, René; Treutler, Kai; Wesling, Volker; Schroepfer, Dirk; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 67 (2023), Heft 4, S. 1049-1057
Wear behavior of innovative niobium carbide cutting tools in ultrasonic-assisted finishing milling
Witte, Nina; Huebler, Michael; Schroepfer, Thomas; Boerner, Andreas; Kannengiesser, Thomas
In: Wear - Amsterdam [u.a.] : Elsevier Science, Bd. 522 (2023), Artikel 204722
Dissertation
Study on the determination and the assessment of the residual stress in laser powder bed fused stainless steel structures
Sprengel, Maximilian; Kannengießer, Thomas
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2023, xxv, 212, XIV Seiten - (BAM Dissertationsreihe; Band 173) [Literaturverzeichnis: Seite 179-199][Literaturverzeichnis: Seite 179-199]
Zur Analyse der Eigenschaftsdegradation und des Bindungsverhaltens von Wasserstoff in höherfesten Feinkornbaustählen
Steppan, Enrico; Kannengießer, Thomas
In: Magdeburg: Universitätsbibliothek, 2023, Dissertation Magdeburg, Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (xiii, 248 Seiten, 40,35 MB) - (BAM-Dissertationsreihe; Band 172) [Literaturverzeichnis: Seite 211-226][Literaturverzeichnis: Seite 211-226]
Buchbeitrag
Bauteilversuch zur Bewertung der wasserstoffunterstützten Rissanfälligkeit geschweißter, dickwandiger Offshore-Gründungsstrukturen
Rhode, Michael; Kromm, Arne; Mente, Tobias; Czeskleba, Denis; Brackrock, Daniel; Kannengießer, Thomas
In: Werkstoffe und Bauteile auf dem Prüfstand - Tagung Werkstoffprüfung 2023 , 2023 - Berlin : Deutscher Verband für Materialforschung und -prüfung (DVM) ; Wächter, Michael *1986-*, S. 316-321 [Tagung: Tagung Werkstoffprüfung 2023, Berlin, 23.-24.11.2025]
2022
Begutachteter Zeitschriftenartikel
Characterization of hydrogen diffusion in offshore steel S420G2+M multi-layer submerged arc welded joint
Rhode, Michael; Nietzke, Jonathan; Mente, Tobias; Richter, Tim; Kannengießer, Thomas
In: Journal of materials engineering and performance - New York, NY : Springer, Bd. 31 (2022), Heft 9, S. 7018-7030
Assessment of the solidification cracking susceptibility of welding consumables in the varestraint test by means of an extended evaluation methodology
Kromm, Arne; Thomas, Maximillian; Kannengießer, Thomas; Gibmeier, Jens; Vollert, Florian
In: Advanced engineering materials - Weinheim : Wiley-VCH Verl., Bd. 24 (2022), Heft 6, Artikel 2101650, insges. 9 S.
Quantitative analysis of hydrogen-assisted microcracking in duplex stainless steel through X-ray refraction 3D imaging
Laquai, René; Schaupp, Thomas; Griesche, Axel; Müller, Bernd R.; Kupsch, Andreas; Hannemann, Andreas; Kannengießer, Thomas; Bruno, Giovanni
In: Advanced engineering materials - Weinheim : Wiley-VCH Verl., Bd. 24 (2022), Heft 6, Artikel 2101287, insges. 10 S.
Triaxial residual stress in laser powder bed fused 316L - effects ofinterlayer time and scanning velocity
Sprengel, Maximilian; Mohr, Gunther; Altenburg, Simon J.; Evans, Alexander; Serrano-Munoz, Itziar; Kromm, Arne; Pirling, Thilo; Bruno, Giovanni; Kannengießer, Thomas
In: Advanced engineering materials - Weinheim : Wiley-VCH Verl., Bd. 24 (2022), Heft 6, Artikel 2101330, insges. 13 S.
Spatially resolved EDS, XRF and LIBS measurements of the chemical composition of duplex stainless steel welds - a comparison of methods
Quackatz, Lukas; Griesche, Axel; Kannengießer, Thomas
In: Spectrochimica acta / B - Amsterdam [u.a.] : Elsevier, Bd. 193 (2022), Artikel 106439
Influence of heat control on properties and residual stresses of additive-welded high-strength steel components
Scharf-Wildenhain, Ronny; Haelsig, André; Hensel, Jonas; Wandtke, Karsten; Schroepfer, Dirk; Kromm, Arne; Kannengießer, Thomas
In: Metals - Basel : MDPI, Bd. 12 (2022), Heft 6, Artikel 951, insges. 10 S.
Modification of Co-Cr alloys to optimize additively welded microstructures and subsequent surface finishing
Eissel, Antonia; Engelking, Lorenz; Treutler, Kai; Wesling, Volker; Schröpfer, Dirk; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 66 (2022), Heft 11, S. 2245–2257
Determination of residual stress evolution during repair welding of high-strength steel components
Becker, Amadeus; Schroepfer, Dirk; Kromm, Arne; Kannengiesser, Thomas
In: Forces in Mechanics - [Erscheinungsort nicht ermittelbar] : Elsevier, Bd. 6 (2022), Artikel 100073
Tool development for hybrid finishing milling of iron aluminides
Witte, Julien; Schroepfer, Dirk; Hamacher, Martin; Michels, Heiner; Hamm, Christoph; Appelt, Michael; Boerner, Andreas; Kannengiesser, Thomas
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 108 (2022), S. 793-798
In situ investigation of chemical composition during TIG welding in duplex stainless steels using Laser-Induced Breakdown Spectroscopy (LIBS)
Quackatz, Lukas; Griesche, Axel; Kannengiesser, Thomas
In: Forces in Mechanics - [Erscheinungsort nicht ermittelbar] : Elsevier, Bd. 6 (2022), Artikel 100063
Dissertation
Verbesserung der Übertragbarkeit von Erstarrungsrissprüfungen nach dem MVT-Verfahren durch Digitalisierung der Probenauswertung
Thomas, Maximilian; Kannengießer, Thomas
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, xii,145 Seiten - (BAM Dissertationsreihe; Band 171), 1613-4249 [Literaturverzeichnis: Seite 105-114][Literaturverzeichnis: Seite 105-114]
Buchbeitrag
Experimentelle Bestimmung und thermodynamische Modellierung des Ausscheidungsverhaltens in der WEZ eines S690QL bei unterschiedlichen Mikrolegierungsrouten
Schröder, Nina; Rhode, Michael; Kannengießer, Thomas
In: DVS Congress 2022 , 2022 , 1. Auflage 2022 - Düsseldorf : DVS Media GmbH, S. 131-137 - (DVS Berichte; Band 382) [Kongress: DVS Congress 2022, Koblenz, 19. -21. September 2022]
Kurzbericht zum Projekt Entwicklung von Wärmenachbehandlungskonzepten zur Vermeidung von Spannungsrelaxationsrissen an Bauteilen aus hochwarmfesten Stählen (DVS-Nr. 01.2261 / IGF-Nr. 20171 N)
Rhode, Michael; Czeskleba, Denis; Kannengießer, Thomas
In: DVS Congress 2022 , 2022 , 1. Auflage 2022 - Düsseldorf : DVS Media GmbH, S. 76-82 - (DVS Berichte; Band 382) [Kongress: DVS Congress 2022, Koblenz, 19. -21. September 2022]
Untersuchung von Spannungsrelaxationsrissmechanismen mittels Simulation einachsiger Spannungszustände in der Grobkornzone von UP-geschweißtem CrMoV-Stahl
Rhode, Michael; Nietzke, Jonathan; Czeskleba, Denis; Kannengießer, Thomas
In: DVS Congress 2022 , 2022 , 1. Auflage 2022 - Düsseldorf : DVS Media GmbH, S. 69-75 - (DVS Berichte; Band 382) [Kongress: DVS Congress 2022, Koblenz, 19. -21. September 2022]
Nickel-iron-alloy modification to enhance additively welded microstructure for subsequent milling
Eissel, A.; Engelking, L.; Treutler, K.; Schroepfer, D.; Wesling, V.; Kannengiesser, Thomas
In: 2nd International Conference on Advanced Joining Processes (AJP 2021) , 1st ed. 2022. - Cham : Springer International Publishing ; da Silva, Lucas F. M., S. 85-99
Bestimmung und thermodynamische Modellierung des Ausscheidungsverhaltens in der WEZ eines S690QL bei unterschiedlichen Mikrolegierungsrouten
Schröder, Nina; Rhode, Michael; Kannengiesser, Thomas
In: DVS Congress 2022 - Große Schweißtechnische Tagung - DVS Campus , 2022 , 1. Auflage - Düsseldorf : DVS Media GmbH, S. 131-137 - (DVS Berichte; Band 382) [Kongress: DVS Congress 2022, Koblenz, 19. -21. September 2022]
2021
Begutachteter Zeitschriftenartikel
Influence of welding stresses on relief cracking during heat treatment of a creep-resistant 13CrMoV steel Part III: assessment of residual stresses from small-scale to real component welds
Schroepfer, D.; Kromm, A.; Lausch, T.; Rhode, Michael; Wimpory, R. C.; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 65 (2021), Heft 9, S. 1671-1685
Diffraction-based residual stress characterization in laser additive manufacturing of metals
Schröder, Jakob; Evans, Alexander; Mishurova, Tatiana; Ulbricht, Alexander; Sprengel, Maximilian; Serrano-Munoz, Itziar; Fritsch, Tobias; Kromm, Arne; Kannengießer, Thomas; Bruno, Giovanni
In: Metals - Basel : MDPI, Bd. 11 (2021), Heft 11, Artikel 1830, insges. 34 S.
Towards the optimization of post-laser powder bed fusion stress-relieve treatments of stainless steel 316L
Sprengel, M.; Ulbricht, A.; Evans, A.; Kromm, A.; Sommer, K.; Werner, T.; Kelleher, J.; Bruno, G.; Kannengießer, Thomas
In: Metallurgical and materials transactions / A - Boston : Springer, Bd. 52 (2021), Heft 12, S. 5342-5356
Process-related influences and correlations in wire arc additive manufacturing of high-strength steels
Schroepfer, D.; Scharf-Wildenhain, R.; Haelsig, A.; Wandtke, K.; Kromm, A.; Kannengießer, Thomas
In: IOP conference series / Materials science and engineering / Institute of Physics - London [u.a.] : Institute of Physics, Bd. 1147 (2021), Artikel 012002, insges. 12 S. [Kolloquium: 22. Werkstofftechnisches Kolloquium, WTK 2021 24th March 2021, Chemnitz, Germany]
Hydrogen-assisted cracking in GMA welding of high-strength structural steel - a new look into this issue at narrow groove
Schaupp, Thomas; Schroeder, Nina; Schroepfer, Dirk; Kannengießer, Thomas
In: Metals - Basel : MDPI, Bd. 11 (2021), Heft 6, Artikel 904, insges. 18 S.
Surface finishing of hard-to-machine cladding alloys for highly stressed components
Schroepfer, Dirk; Treutler, Kai; Boerner, Andreas; Gustus, Rene; Kannengießer, Thomas; Wesling, Volker; Maus-Friedrichs, Wolfgang
In: The international journal of advanced manufacturing technology - London : Springer, Bd. 114 (2021), Heft 5/6, S. 1427-1442
Criccabilita assistita da idrogeno nella saldatura a filo continuo con protezione gassosa di acciai strutturali ad alta resistenza con trasferimento spray modificato
Schaupp, Thomas; Rhode, Michael; Yahyaoui, Hamza; Kannengießer, Thomas
In: Rivista italiana della saldatura - Milano . - 2021, Heft 72, S. 145-165
Wissenschaftliche Monographie
DVS Studie Fügetechnik für die neue Wasserstoffökonomie - - Werkstoffe, Schweißtechnologien, Perspektiven - : Studie im Auftrag der Forschungsvereinigung Schweißen und verwandte Verfahren e. V. des DVS
Kannengießer, Thomas; Rhode, Michael
In: Düsseldorf: DVS Media GmbH, 2021, IV, 59 Seiten - (DVS Berichte; Band 373), ISBN: 3-96144-157-X [Literaturverzeichnis: Seite 51-59]
Dissertation
Real-time radiography for observation of crack growth during welding
Boateng, Francis Twumasi; Kannengießer, Thomas
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2021, xi, 112 Blätter [Literaturverzeichnis: Blatt 94-104][Literaturverzeichnis: Blatt 94-104]
Buchbeitrag
Diffusionsmessungen in UP-Mehrlagenschweißgut als effektives Tool gegen verzögerte Kaltrissbildung in Dickblechschweißungen
Rhode, Michael; Nietzke, Jonathan; Mente, Tobias; Kannengießer, Thomas
In: DVS Congress 2021 , 1. Auflage 2021 - Düsseldorf : DVS Media GmbH, S. 448-459 - (DVS Berichte; Band 371) [Kongress: DVS Congress 2021, Essen, 14.-17. September 2021]
Fügetechnik in Wasserstofftechnologien - Forschungsbedarf für die Branche
Rhode, Michael; Kannengießer, Thomas
In: DVS Congress 2021 , 1. Auflage 2021 - Düsseldorf : DVS Media GmbH, S. 612-624 - (DVS Berichte; Band 371) [Kongress: DVS Congress 2021, Essen, 14.-17. September 2021]
Wasserstoffunterstützte Kaltrissbildung in Schweißnähten hochfester Stahlgüten - Anforderungen an die Prüfung
Rhode, Michael; Kannengießer, Thomas; Schaupp, Thomas
In: Werkstoffe und Bauteile auf dem Prüfstand / Tagung Werkstoffprüfung , 2021 - Düsseldorf : Stahlinstitut VDEh ; Brockmann, Stefanie, S. 15-20 [Tagung: Tagung Werkstoffprüfung, Online, 2. bis 3. Dezember 2021]
2020
Begutachteter Zeitschriftenartikel
Influence of welding stresses on relief cracking during heat treatment of a creep-resistant 13CrMoV steel Part II: mechanisms of stress relief cracking during post weld heat treatment
Kromm, A.; Lausch, T.; Schroepfer, D.; Rhode, Michael; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 64 (2020), Heft 5, S. 819-829
Hydrogen-assisted cracking of GMA welded 960 MPa grade high-strength steels
Schaupp, Thomas; Ernst, Wolfgang; Spindler, Helmut; Kannengießer, Thomas
In: International journal of hydrogen energy - New York, NY [u.a.] : Elsevier, Bd. 45 (2020), Heft 38, S. 20080-20093
Hydrogen-assisted cracking in GMA welding of high-strength structural steels using the modified spray arc process
Schaupp, Thomas; Rhode, Michael; Yahyaoui, Hamza; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 64 (2020), Heft 12, S. 1997-2009
Tungsten inert gas bead-on-plate weld chemical composition analysis by laser-induced breakdown spectroscopy
Tarpali, U. A.; Kannengiesser, Thomas; Griesche, A.
In: IOP conference series / Institute of Physics - London [u.a.] : Institute of Physics - Vol. 882 (2020), Paper 012023, insgesamt 8 Seiten [Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]
Influence of welding stresses on relief cracking during heat treatment of a creep-resistant 13CrMoV steel. Part I: effect of heat control on welding stresses and stress relief cracking
Kromm, A.; Lausch, T.; Schroepfer, D.; Rhode, Michael; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 64 (2020), Heft 5, S. 807-817
In situ chemical composition analysis of a tungsten-inert-gas austenitic stainless steel weld measured by laser-induced breakdown spectroscopy
Taparli, Ugur Alp; Kannengiesser, Thomas; Cieslik, Katarzyna; Mory, David; Griesche, Axel
In: Spectrochimica acta. Part B, Atomic spectroscopy - Amsterdam [u.a.] : Elsevier, Bd. 167 (2020), Artikel 105826
Hydrogen-assisted cracking in GMA welding of high-strength structural steels using the modified spray arc process
Schaupp, Thomas; Rhode, Michael; Yahyaoui, Hamza; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 64 (2020), Heft 12, S. 1997-2009
Surface- and volume-based investigation on influences of different Varestraint testing parameters and chemical compositions on solidification cracking in LTT filler metals
Thomas, Maximilian; Vollert, Florian; Weidemann, Jens; Gibmeier, Jens; Kromm, Arne; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 64 (2020), Heft 5, S. 913-923
2019
Begutachteter Zeitschriftenartikel
Hydrogen determination in welded specimens by carrier gas hot extraction - a review on the main parameters and their effects on hydrogen measurement
Rhode, Michael; Schaupp, Thomas; Muenster, Christoph; Mente, Tobias; Boellinghaus, Thomas; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 63 (2019), Heft 2, S. 511-526
Welding stress control in high-strength steel components using adapted heat control concepts
Schröpfer, Dirk; Kromm, Arne; Schaupp, Thomas; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 63 (2019), Heft 3, S. 647-661
Influence of heat control on hydrogen distribution in high-strength multi-layer welds with narrow groove
Schaupp, Thomas; Rohde, Michael; Yahyaoui, Hamza; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 63 (2019), Heft 3, S. 607-616
Wissenschaftliche Monographie
Ermittlung geeigneter Wärmeführungen zur Vermeidung wasserstoffunterstützter Kaltrisse beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen - Schlussbericht zum IGF-Vorhaben Nr. 18596 BR (Berichtszeitraum: 01.01.2015 bis 30.06.2017) der Forschungsvereinigung Deutscher Verband für Schweißen und verwandte Verfahren e.V. ; Forschungsstelle(n): Nr. 1: Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Nr. 2: Institut für Werkstoff- und Fügetechnik (IWF), Otto-von-Guericke-Universität Magdeburg
Schaupp, Thomas; Kannengießer, Thomas; Burger, Stefan; Zinke, Manuela; Jüttner, Sven
In: Magdeburg: Universitätsbibliothek Magdeburg, 2019, 1 Online-Ressource (IV, 94 Seiten, 6,55 MB) [Förderkennzeichen IGF-Nr. 18.596 BR]
2018
Begutachteter Zeitschriftenartikel
Hydrogen trapping in T24 Cr-Mo-V steel weld joints-microstructure effect vs. experimental influence on activation energy for diffusion
Rhode, Michael; Mente, Tobias; Steppan, Enrico; Steger, Joerg; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 62 (2018), Heft 2, S. 277-287
Influence of welding parameters on diffusible hydrogen content in high-strength steel welds using modified spray arc process
Schaupp, Thomas; Rhode, Michael; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 62 (2018), Heft 1, S. 9-18
Einfluss der Wärmeführung auf die Wasserstoffkonzentration in geschweißten höherfesten Feinkornbaustählen beim Einsatz modifizierter Sprühlichtbogenprozesse
Schaupp, Thomas; Kannengießer, Thomas; Burger, Stefan; Zinke, Manuela; Jüttner, Sven
In: Schweissen und Schneiden - Düsseldorf : DVS-Media GmbH, Bd. 70 (2018), Heft 5, S. 290-197
Influence of heat control on hydrogen distribution in high-strength multi-layer welds with narrow groove
Schaupp, Thomas; Rhode, Michael; Yahyaoui, Hamza; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 63 (2019), Heft 3, S. 607-616
From the field to the lab - real scale assessment of stresses in welded components
Kromm, Arne; Lausch, Thomas; Schröpfer, Dirk; Dixnet, Jonny; Hannemann, Andreas; Kannengiesser, Thomas
In: Materials Performance and Characterization - West Conshohocken, Pa. : ASTM International, Bd. 7 (2018), Heft 4, Artikel 20170103
Dissertation
Wärmeführung und Beanspruchung von hochfesten Verbindungen mit LTT-Schweißzusatzwerkstoff
Dixneit, Jonny; Kannengießer, Thomas
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), 2019, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2018, xiii, 269 Seiten - (BAM-Dissertationsreihe; Band 163) [Literaturverzeichnis: Seite 201-226][Literaturverzeichnis: Seite 201-226]
Buchbeitrag
Residual stress formation in component related stress relief cracking tests of a welded creep-resistant steel
Rhode, Michael; Kromm, Arne; Schroepfer, Dirk; Steger, Joerg; Kannengießer, Thomas
In: Residual Stresses 2018 - ECRS-10 / European Conference on Residual Stresses , 2018 - Millersville, PA : Materials Research Forum LLC, S. 185-190 - (Materials research proceedings; volume 6) [Konferenz: 10th European Conference Residual Stresses 2018, ECRS-10, 11-14 September 2018]
Kaltrissbildung in Mehrlagenschweißungen - Einflussanalyse von Nahtgeometrie und Wärmeführung beim Einsatz modifizierter Sprühlichtbögen
Schaupp, Thomas; Schröpfer, D.; Kannengießer, Thomas
In: DVS Congress 2018 ; [Band] - Düsseldorf : DVS Media GmbH, S. 73-78 [Kongress: DVS Congress 2018, Friedrichshafen, 2018.09.17-18]
Hydrogen distribution in multi-layer welds of steel S960QL
Schaupp, Thomas; Rhode, Michael; Yahyaoui, H.; Kannengießer, Thomas
In: Steelyhydrogen - Ghent - paper P44 [Konferenz: SteelyHydrogen2018, 29-31 May 2018, Ghent]
In-Situ determination of critical welding stresses during assembly of thick-walled components made of high-strength steel.
Schroepfer, Dirk; Kromm, Arne; Hannemann, A.; Kannengießer, Thomas
In: Residual Stresses 2018 - ECRS-10 / European Conference on Residual Stresses , 2018 - Millersville, PA : Materials Research Forum LLC ; Seefeldt, Marc, S. 191-196 - (Materials research proceedings; volume 6) [Konferenz: 10th European Conference Residual Stresses 2018, ECRS-10, 11-14 September 2018]
2017
Begutachteter Zeitschriftenartikel
Thermal desorption analysis for hydrogen trapping in microalloyed high-strength steels
Steppan, Enrico; Mantzke, Philipp; Steffens, Benjamin R.; Rhode, Michael; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 61 (2017), Heft 4, S. 637-648
Measurement and numerical modeling of residual stresses in welded HSLA component-like I-girders
Launert, Benjamin; Rhode, Michael; Kromm, Arne; Pasternak, Hartmut; Kannengiesser, Thomas
In: Welding in the world - Berlin : Springer, Bd. 61 (2017), Heft 2, S. 223-229
Advanced residual stress assessment of plate girders through welding simulation
Pasternak, Hartmut; Launert, Benjamin; Kannengießer, Thomas; Rhode, Michael
In: Procedia engineering - Amsterdam [u.a.] : Elsevier, Bd. 172 (2017), S. 23-30
Hydrogen degradation effects on mechanical properties in T24 weld microstructure Effetti correlati con il danneggiamento da idrogeno sulle proprietà meccaniche di giunti saldati di acciai grado T24
Rhode, Michael; Steger, J.; Boellinghaus, T.; Kannengießer, Thomas
In: Rivista italiana della saldatura - Milano . - 2017, Heft 69, S. 21-43
Dissertation
Adaptierte Wärmeführung zur Optimierung schweißbedingter Beanspruchungen und Eigenschaften höherfester Verbindungen
Schröpfer, Dirk; Kannengießer, Thomas
In: Aachen: Shaker Verlag, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2017, xxv, 239 Seiten - (Berichte aus der Werkstofftechnik), ISBN: 978-3-8440-5406-4 [Literaturverzeichnis: Seite 199-213][Literaturverzeichnis: Seite 199-213]
Gefüge und Eigenspannungen beim Reparatur-Schweißen von höherfesten Feinkornbaustählen
Schasse, René; Kannengießer, Thomas
In: Aachen: Shaker Verlag, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2017, VIII, 312 Seiten - (Schriftenreihe Fügetechnik Magdeburg; 2017,1), ISBN: 978-3-8440-5544-3 [Literaturverzeichnis: Seite 281-290][Literaturverzeichnis: Seite 281-290]
Buchbeitrag
Influence of heat control on residual stresses in low transformation temperature (LTT) large scale welds
Kannengießer, Thomas; Dixneit, Jonny; Kromm, Arne; Boin, Mirko; Gubmeier, Jenz
In: Residual stresses 2016 / International Conference on Residual Stresses , 2016 - Millersville, PA, USA : Materials Research Forum LLC ; Holden, Thomas M. . - 2017, S. 223-228 [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]
Residual stress influence on the flexural buckling of welded I-girders
Kannengießer, Thomas; Launert, Benjamin; Rhode, Michael; Kromm, Arne; Pasternak, Hartmut
In: Residual stresses 2016 / International Conference on Residual Stresses , 2016 - Millersville, PA, USA : Materials Research Forum LLC . - 2017, S. 109-114 [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]
Influence of weld repair by gouging on the residual stresses in high strength steels
Kannengießer, Thomas; Schröpfer, Dirk; Kromm, Arne; Flohr, Kerstin
In: Residual stresses 2016 / International Conference on Residual Stresses , 2016 - Millersville, PA, USA : Materials Research Forum LLC . - 2017, S. 169-174 [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]
Combining sectioning method and x ray diffraction for evaluation of residual stresses in welded high strength steel components
Kromm, Arne; Rhode, Michael; Launert, Benjamin; Dixneit, Jonny; Kannengießer, Thomas; Pasternak, Hartmut
In: Residual stresses 2016 / International Conference on Residual Stresses , 2016 - Millersville, PA, USA : Materials Research Forum LLC ; Holden, Thomas M. . - 2017, S. 163-168 [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]
2016
Begutachteter Zeitschriftenartikel
Hydrogen degradation effects on mechanical properties in T24 weld microstructures
Rhode, Michael; Steger, Joerg; Böllinghaus, Thomas; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 60 (2016), Heft 2, S. 201-216
In-situ load analysis in multi-run welding using LTT filler materials
Dixneit, J.; Kromm, A.; Hannemann, Andreas; Friedersdorf, P.; Kannengießer, Thomas; Gibmeier, J.
In: Welding in the world - Berlin : Springer, Bd. 60 (2016), Heft 6, S. 1159-1168
Real-time radiography for observation of crack growth during GTA welding
Boateng, F. T.; Ewert, U.; Kannengiesser, T.; Zscherpel, U.; Griesche, A.; Kromm, A.; Hohendorf, S.; Redmer, B.
In: 2016
Stress build-up in HSLA steel welds due to material behaviour
Schroepfer, Dirk; Kannengiesser, Thomas
In: 2016, S. 49-58
HAZ softening in Nb-, Ti- and Ti + V-bearing quenched and tempered steel welds
Zhang, Lei; Kannengiesser, Thomas
In: 2016, S. 177-184
Effect of hydrogen on mechanical properties of heat affected zone of a reactor pressure vessel steel grade
Rhode, Michael; Steger, Joerg; Steppan, Enrico; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 60 (2016), Heft 4, S. 623-638
Dissertation
Hydrogen diffusion and effect on degradation in welded microstructures of creep-resistant low-alloyed steels
Rhode, Michael; Kannengießer, Thomas
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2016, XVII, 302 Seiten - (BAM-Dissertationsreihe; Band 148), ISBN: 3-9817853-3-9
Microstructure-property relationship in microalloyed high-strength steel welds
Zhang, Lei; Kannengießer, Thomas
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), 2017, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2016, xiii, 169 Seiten - (BAM-Dissertationsreihe; Band 155), ISBN: 3-9818270-4-X
2015
Originalartikel in begutachteter internationaler Zeitschrift
Schweißbedingte Beanspruchungen an hochfesten Bauteilen - Eine Frage der Wärmeführung
Schröpfer, Dirk; Kannengießer, Thomas
In: Der Praktiker, Düsseldorf, 2015, S.470-475
Schweißbedingte Beanspruchungen beim Einsatz modifizierter Sprühlichtbogenprozesse in hochfesten Feinkornbaustählen
Schröpfer, Dirk; Kannengießer, Thomas
In: 2015
Begutachteter Zeitschriftenartikel
Improving welding stresses by filler metal and heat control selection in component-related butt joints of high-strength steel
Schroepfer, Dirk; Kromm, Arne; Kannengießer, Thomas
In: Welding in the world - Berlin : Springer, Bd. 59 (2015), Heft 3, S. 455-464
Measuring Hydrogen Distributions in Iron and Steel Using Neutrons
Griesche, A.; Dabah, E.; Kannengiesser, T.; Hilger, A.; Kardjilov, N.; Manke, I.; Schillinger, B.
In: 2015, S. 445-450
Residual stresses in repair welds of high-strength low-alloy steels
Schasse, R.; Kannengiesser, Th.; Kromm, A.; Mente, T.
In: 2015, S. 757-765
Properties and weldability of modified low transformation temperature filler wires
Kromm, A.; Mee, V.; Kannengießer, Thomas; Kalfsbeek, B.
In: Welding in the world - Berlin : Springer, Bd. 59 (2015), Heft 3, S. 413-425
Effect of cooling rate on microstructure and properties of microalloyed HSLA steel weld metals
Zhang, L.; Pittner, A.; Michael, T.; Rhode, Michael; Kannengießer, Thomas
In: Science and technology of welding and joining - London : Sage Publications, Bd. 20 (2015), Heft 5, S. 371-377
Dissertation
Zum Einfluss der Wärmeführung auf die Rissbildung beim Spannungsarmglühen dickwandiger Bauteile aus 13CrMoV9-10
Lausch, Thomas; Kannengießer, Thomas
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015, XVIII, 233 S. - (BAM-Dissertationsreihe; 134), ISBN: 978-3-9817149-5-1
Beitrag zur Ermittlung vorrangig konstruktiver Einflussgrößen auf die Heißrissinitiierung an geschweißten Bauteilen
Gollnow, Christian; Kannengießer, Thomas
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), Dissertation Otto-von-Guericke-Universität Magdeburg 2015, XIII, 169 Seiten - (BAM-Dissertationsreihe; Band 139), ISBN: 978-3-9817502-0-1
2014
Begutachteter Zeitschriftenartikel
Stress build-up during multilayer welding with novel martensitic filler materials
Kromm, A.; Kannengießer, T.
In: HTM - Journal of Heat Treatment and Materials, Vol. 69, 2014, Issue 2, S. 80-88, ISSN 21941831, 10.3139/105.110210
Effekt der Wärmeführung auf schweißbedingte Beanspruchungen in Bauteilen aus hochfestem Feinkornbaustahl
Schröpfer, Dirk; Kannengießer, Thomas
In: Schweissen und Schneiden: Fachzeitschrift für Schweißen und verwandte Verfahren - Düsseldorf: DVS-Media GmbH, Bd. 66.2014, 8, S. 434-441
Residual stress in steel fusion welds joined using low transformation temperature (LTT) filler material
Gibmeier, J.; Obelode, E.; Altenkirch, J.; Kromm, A.; Kannengießer, T.
In: Materials Science Forum, Vol. 768-769, 2014, S. 620-627, ISSN 02555476, 10.4028/www.scientific.net/MSF.768-769.620
Three-dimensional imaging of hydrogen blister in iron with neutron tomography
Griesche, Axel; Dabah, Eitan; Kannengießer, Thomas; Kardjilov, Nikolay; Hilger, André; Manke, Ingo
In: Acta materialia - Amsterdam [u.a.]: Elsevier Science, Bd. 78.2014, S. 14-22
Imaging of hydrogen in steels using neutrons
Griesche, Axel; Dabah, Eitan; Kardjilov, Nikolay; Hilger, André; Manke, Ingo; Kannengießer, Thomas
In: International journal of materials research: IJMR - München: Hanser, Bd. 105.2014, 7, S. 640-644
Residual stress engineering by low transformation temperature alloys-state of the art and recent developments
Kromm, Arne; Dixneit, Jonny; Kannengießer, Thomas
In: Welding in the world - Berlin: Springer, Bd. 58 (2014), 5, S. 729-741
Challenges when welding components made of higher-strength fine-grained structural steels
Kannengießer, Thomas
In: Welding and cutting: technical journal for welding and allied processes - Düsseldorf: DVS-Verl, Bd. 13.2014, 4, S. 384-392
Real time monitoring of phase transformation and strain evolution in LTT weld filler material using EDXRD
Gibmeier, J.; Held, E.; Altenkirch, J.; Kromm, A.; Kannengießer, Thomas; Buslaps, Th.
In: Journal of materials processing technology - Amsterdam [u.a.]: Elsevier, Bd. 214.2014, 11, S. 2739-2747
Austenite grain growth and microstructure control in simulated heat affected zones of microalloyed HSLA steel
Zhang, Lei; Kannengießer, Thomas
In: Materials science and engineering / A - Amsterdam: Elsevier, Bd. 613.2014, S. 326-335
Buchbeitrag
Moderne Methoden der Spannungsanalyse an geschweißten Komponenten
Kannengießer, Thomas; Kromm, A.
In: 15. Sommerkurs Werkstoffe und Fügen : Magdeburg, 12. und 13. September 2014. - Magdeburg : Univ., S. 27-34Kongress: Sommerkurs Werkstoffe und Fügen; 15 (Magdeburg) : 2014.09.12-13
Herausforderungen beim Schweißen von Bauteilen aus höherfesten Feinkornbaustählen
Kannengießer, Thomas
In: Schweißtechnische Fachtagung. - Magdeburg : Verl. Univ. Magdeburg, insges. 10 S., 2014Kongress: Schweißtechnische Fachtagung; 24 (Magdeburg) : 2014.05.15
In situ observation of stress accumulation during sub-merged arc welding
Kromm, Arne; Kannengießer, Thomas
In: Advanced materials research - Zug: Scitec Publ, Bd. 996.2014, S. 417-423
Welding residual stress distribution of quenched and tempered and thermo-mechanically hot rolled high strength steels
Schaupp, Thomas; Schröpfer, Dirk; Kromm, Arne; Kannengießer, Thomas
In: Advanced materials research - Zug: Scitec Publ, Bd. 996.2014, S. 457-462
Approach for calculation of apparent hydrogen diffusion coefficients with permeation experiments in CrMoV steel weld joints
Rhode, Michael; Kannengießer, Thomas; Steger, Jörg
In: SteelyHydrogen2014 conference proceedings: 5-7 May 2014, Ghent - Zelzate: OCAS, S. 669-674Kongress: Steel & Hydrogen (Ghent : 2014.05.05-07)
Influence of heat control on welding stresses in multilayer-component welds of high-strength steel S960QL
Schröpfer, Dirk; Kannengießer, Thomas; Kromm, Arne
In: Advanced materials research - Zug: Scitec Publ, Bd. 996.2014, S. 475-480
Multiaxiale Belastungsanalyse an dickwandigen Bauteilschweißungen aus 13CrMoV9-10
Lausch, Thomas; Steger, Jörg; Kannengießer, Thomas; Schmitz-Niederau, Martin
In: 2014
2013
Begutachteter Zeitschriftenartikel
The advantage of using in-situ methods for studying hydrogen mass transport - neutron radiography vs. carrier gas hot extraction
Griesche, Axel; Solórzano, Eusebio; Beyer, Katrin; Kannengießer, Thomas
In: International journal of hydrogen energy - New York, NY [u.a.] : Elsevier, Bd. 38 (2013), Heft 34, S. 14725-14729
Multi-axial load analysis of thick-walled component welds made of 13CrMoV9-10
Lausch, Thomas; Kannengiesser, Thomas; Schmitz-Niederau, Martin
In: 2013, S. 1234-1240
Multi-axial load analysis of thick-walled component welds made of 13CrMoV9-10
Lausch, Thomas; Kannengiesser, Thomas; Schmitz-Niederau, Martin
In: Journal of materials processing technology - Amsterdam [u.a.] : Elsevier, Bd. 213 (2013), Heft 7, S. 1234-1240
Buchbeitrag
Energy dispersive synchrotron diffraction for in-situ analyses of hydrogen behavior in steels
Kannengießer, Thomas; Dabah, Eitan
In: Proceedings of The 8th Pacific Rim International Congress on Advanced Materials and Processing: PRICM 8/ Pacific Rim International Conference on Advanced Materials and Processing - Hoboken, New Jersey: Wiley, 2013 . - 2013, S. 3481-3488[Kongress: 8th Pacific Rim International Congress on Advanced Materials and Processing, PRICM 8, Waikoloa, Hawaii, 2013; Part XV: Symposium O: Advanced Neutron and Synchrotron Studies of Materials]
Mikrostruktur- und Härteentwicklung in Schweißnähten mit neuartigen LTT-Schweißzusatzwerkstoffen
Held, Ester; Ohl, H.; Gibmeier, Jens; Kromm, Arne; Kannengießer, Thomas
In: Fortschritte in der Metallographie: [Vortragstexte der 47. Metallographie-Tagung, 18. - 20. September 2013 in Friedrichshafen] / [Veranstalter: Fachausschuss Materialographie der Deutschen Gesellschaft für Materialkunde e.V.]. Michael Lohrmann ...: [Vortragstexte der 47. Metallographie-Tagung, 18. - 20. September 2013 in Friedrichshafen] - Bonn: Inventum GmbH, 2013 . - 2013[Kongress: 47. Metallographie-Tagung, Friedrichshafen, 18. - 20. September, 2013]
Untersuchungen zum Einfluss der Wärmeführung auf die Eigenspannungsausbildung und Gesamtbeanspruchung in Schweißverbindungen aus hochfestem Feinkornbaustahl
Schröpfer, Dirk; Kannengießer, Thomas; Lausch, Thomas
In: DVS Congress 2013: Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren: Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013/ Große Schweißtechnische Tagung - Düsseldorf: DVS Media, 2013 . - 2013[Kongress: DVS Congress 2013: Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren, Essen, 16. - 21. September, 2013]
Experimental and numerical analysis of local thermomechanical behavior for hot cracking assessment in welds
Gollnow, Christian; Kannengießer, Thomas; Lauer, Roman; Dong, M.; Riekers, Ralf
In: Mathematical modelling of weld phenomena 10: [papers presented at the 10th International Seminar "Numerical Analysis of Weldability", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria / Technische Universität Graz. [Organized by the Institute for Materials Science and Welding (IWS) of Graz University of Technology ...] Ed. by C. Sommitsch ...: [papers presented at the 10th International Seminar "Numerical Analysis of Weldability", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria - Graz: Verl. der Techn. Univ. Graz, 2013 . - 2013, S. 357-370[Kongress: 10. International Seminar "Numerical Analysis of Weldability", Schloss Seggau near Graz, 24. - 26.09.2012]
Herausgeberschaft
Residual stresses in multi-layer component welds
Rhode, M.; Kromm, A.; Kannengiesser, T.
In: ASM Proceedings of the International Conference: Trends in Welding Research, 2013, S. 48-54
2012
Begutachteter Zeitschriftenartikel
Mobile computed tomography for inspection of welded pipes
Ewert, Uwe; Redmer, Bernhard; Kannengiesser, Thomas; Kromm, Arne
In: The e-journal of nondestructive testing & ultrasonics - Kirchwald: NDT.net . - 2012, 4, insges. 4 S.
2011
Begutachteter Zeitschriftenartikel
Thermo analytic investigation of hydrogen effusion behavior - Sensor evaluation and calibration
Ried, P.; Gaber, M.; Beyer, K.; Müller, R.; Kipphardt, H.; Kannengießer, T.
In: Steel Research International, Vol. 82, 2011, Issue 1, S. 14-19, ISSN 16113683, 10.1002/srin.201000237
2010
Begutachteter Zeitschriftenartikel
Effects of shielding with various hydrogen-argon mixtures on supermartensitic stainless steel TIG welds
Eliezer, D.; Nissim, Y.; Kannengießer, T.
In: Materialpruefung/Materials Testing, Vol. 52, 2010, Issue 5, S. 306-315, ISSN 00255300
2009
Buchbeitrag
Manufacturing engineering
Böllinghaus, Thomas; Byrne, Gerry; Cherpakov, Boris Ilich; Chlebus, Edward; Cross, Carl E.; Denkena, Berend; Dilthey, Ulrich; Hatsuzawa, Takeshi; Herfurth, Klaus; Herold, Horst; Kaldos, Andrew; Kannengießer, Thomas; Karpenko, Michail; Karpuschewski, Bernhard; Marya, Manuel; Marya, Surendar K.; Matthes, Klaus-Jürgen; Middeldorf, Klaus; Oliveira, Joao Fernando G.; Pieschel, Jörg; Priem, Didier M.; Reidel, Frank; Schleser, Markus; Tekkaya, A. Erman; Todtermuschke, Marcel; Vereschaka, Anatole; Hofe, Detlef; Wagner, Nikolaus; Wodara, Johannes; Woeste, Klaus
In: Springer handbook of mechanical engineering - with ... 402 tables: with ... 402 tables - New York: Springer . - 2009, S. 523-773
2008
Buchbeitrag
Solid wire vs. flux cored Wire - comparing investigations for GMA-laser-hybrid welding
Lorenz, Stephan; Kannengießer, Thomas; Posch, Gerhard
In: Kongress: International Conference on Design, Fabrication and Economy of Welded Structures, Miskolc, 24.-26.04.2008, Design, fabrication and economy of welded structures - Chichester: Horwood . - 2008, S. 477-484
Herausgeberschaft
Influence of local weld deformation on the solidification cracking susceptibility of a fully austenitic stainless steel
Kromm, A.; Kannengießer, Th.
In: Hot Cracking Phenomena in Welds II, 2008, S. 127-145
Determination of critical strain rate for solidification cracking by numerical simulation
Wolf, M.; Kannengießer, Th.; Böllinghaus, Th.
In: Hot Cracking Phenomena in Welds II, 2008, S. 77-92
2007
Buchbeitrag
Design-specific influences on local weld displacement and hot cracking
Kannengießer, Thomas; Kromm, Arne
In: Kongress: II. International Conference in Welding Joining of Materials, ICWJM 2007 - II. Conferencia Internacional de Soldadura y Técnologias de Unión de Materiales, Cusco, Peru, 16-18 Abril 2007, Cusco, Peru, 16.-18.04.2007, ICWJM 2007 - II. Conferencia Internacional de Soldadura y Técnologias de Unión de Materiales, Cusco, Peru, 16-18 Abril 2007 - Fondo Editorial . - 2007, insges. 9 S.
Prüfen Sie noch oder bewerten Sie schon - Entwicklungen in der Untersuchung geschweißter Bauteile
Boellinghaus, Thomas; Kannengießer, Thomas
In: Kongress: 10. Internationales Aachener Schweißtechnik-Kolloquium, IAST'07, Aachen, 24. - 25.10.2007, Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft - Herzogenrath: Shaker . - 2007, S. 41-57
2006
Begutachteter Zeitschriftenartikel
Prüfung der Kalt- und Heißrisssicherheit gefügter Bauteile
Kannengießer, Thomas; Cross, Carl Edward; Schobbert, Helmut
In: Jahrbuch Schweisstechnik ... - Düsseldorf : DVS Media GmbH . - 2006
2001
Originalartikel in begutachteter internationaler Zeitschrift
Effect of weld metal strength and welding conditions on reaction forces and stress distribution of restrained components.
Kannengiesser, T.; Boellinghaus, T.; Florian, W.; Herold, Horst
In: Welding in the world : Journal of the International Institute of Welding [Oxford] 45(2001), Nr. 1/2, S. 18 - 26
1999
Buchbeitrag
Verformungs- und Spannungsanalyse an Großproben aus Feinkornbaustahl in einer Großprüfanlage
Kannengießer, Thomas; Florian, Wolfgang; Herold, Horst
In: Anspruch und Tendenzen in der experimentellen Strukturmechanik : GESA-Symposium 1999 ; Symposium Warnemünde, 6. und 7. Mai 1999. - Düsseldorf : VDI-Verl., S. 215-224 - (VDI-Berichte; 1463)[Kongress: GESA-Symposium 1999, Warnemünde, 6. und 7. Mai 1999]