Additive manufacturing of a new non-equiatomic high-entropy alloy with exceptional strength-ductility synergy via in-situ alloying

Yan, Shaohua; He, Xipei; Krüger, Manja; Li, Yusen; Jia, Qiang

In: Materials and design - Amsterdam [u.a.] : Elsevier Science, Bd. 238 (2024), Artikel 112676, insges. 11 S.

Publikationslink

Thermodynamic properties of refractory Mo-Nb-V-Ti high entropy alloys (HEAs)

Bencze, László; Hasemann, Georg; Sergeev, Dmitry; Motalov, Vladimir; Müller, Michael G.; Krüger, Manja

In: Journal of alloys and compounds - Lausanne : Elsevier, Bd. 976 (2023), Artikel 173279, insges. 12 S.

Publikationslink

Investigation of the equilibrium morphology of fcc [epsilon] − Cu in Fe-Cu alloys using a non-local Allen–Cahn model

Nizinkovskyi, Rostyslav; Halle, Thorsten; Krüger, Manja

In: Materials today / Communications - Amsterdam [u.a.] : Elsevier, Bd. 38 (2024), Artikel 107635, insges. 11 S.

Publikationslink

Orientation-dependent hardness of Mo3Si studied by cube-corner nanoindentation

Yang, Weiguang; Hasemann, Georg; Schwaiger, Ruth; Krüger, Manja

In: Journal of materials science - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2024), S. 277-288

Publikationslink

Effect of oxygen in Mo-TM (TM = Ti, Zr, Hf) solid solutions as studied with density functional theory calculations

Touzani, Rachid; Nizinkovskyi, Rostyslav; Krüger, Manja

In: Crystals - Basel : MDPI, Bd. 14 (2024), Heft 3, Artikel 213, insges. 13 S.

Publikationslink

Improved creep resistance of Mo-V-Si-B alloys with a density below 8 g/cm³

Becker, Julia; Krüger, Manja

In: Intermetallics - Amsterdam [u.a.] : Elsevier Science, Bd. 169 (2024), Artikel 108277, insges. 7 S.

Publikationslink

Efficient sintering of Mo matrix composites - a study of temperature dependences and the use of the sinter additive Ni

Solodkyi, Ievgen; Petrusha, Vadym; Grigoroscuta, Mihai Alexandru; Schmelzer, Janett; Hasemann, Georg; Betke, Ulf; Badica, Petre; Krüger, Manja

In: Metals - Basel : MDPI, Bd. 13 (2023), Heft 10, Artikel 1715, insges. 15 S.

Publikationslink

Microstructure formation of cast and directionally solidified Mo-Ti-B alloys

Petrusha, Vadym; Hasemann, Georg; Touzani, Rachid Stefan; Bolbut, Volodymyr; Bogomol, Iurii; Krüger, Manja

In: Metals - Basel : MDPI, Bd. 12 (2022), Heft 6, Artikel 916, insges. 13 S.

Publikationslink

Influence of elasticity on the morphology of fcc-Cu precipitates in Fe-Cu alloys - a phase-field study

Nizinkovskyi, Rostyslav; Halle, Thorsten; Krüger, Manja

In: Journal of nuclear materials - Amsterdam [u.a.]: Elsevier Science, Bd. 566 (2022)

Publikationslink

Influence of a fine-grained surface structure on the tensile behaviour of a beta stabilised intermetallic γ-TiAl-based alloy

Stangl, Christoph; Kollmannsberger, Eva; Zimogliadova, Tatiana A.; Krüger, Manja; Saage, Holger

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 146 (2022), insges. 11 S.

Publikationslink

Ternary Vss-V3Si-V5SiB2 eutectic formation in the V-Si-B system

Yang, W. G.; Hasemann, Georg; Yazlak, M.; Gorr, B.; Schwaiger, Ruth; Krüger, Manja

In: Journal of alloys and compounds - Lausanne: Elsevier, Bd. 902 (2022)

Publikationslink

High temperature oxidation performance of an additively manufactured Mo9Si8B alloy

Becker, Julia; Schmigalla, Sven; Schultze, Sabine; Rittinghaus, Silja-Katharina; Weisheit, Andreas; Schmelzer, Janett; Krüger, Manja

In: Oxidation of metals - Dordrecht [u.a.]: Springer Science + Business Media B.V, Bd. 97 (2022), S. 167-181

Publikationslink

Enhanced fracture toughness and high-temperature strength of directionally solidified Mo-XC alloys

Becker, Julia; Breuer, Danio; Bogomol, Jurii; Krüger, Manja

In: Crystals - Basel: MDPI, Bd. 12 (2022), 11, insges. 8 S.

Publikationslink

V 8SiB 4 - a new ternary phase in the V-Si-B system

Yang, W. G.; Touzani, Rachid Stefan; Hasemann, Georg; Yazlak, M.; Ziegner, M.; Gorr, B.; Schwaiger, R.; Krüger, Manja

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 151 (2022), insges. 12 S.

Publikationslink

Thermodynamic modelling of the V-Ti-B system

Yazlak, Mustafa; Christ, H.-J.; Yang, W.; Krüger, Manja; Hasemann, Georg; Gorr, B.

In: Calphad - Amsterdam [u.a.]: Elsevier Science, Bd. 79 (2022)

Publikationslink

Microstructural modification of TiAl6V4 alloy to avoid detrimental effects due to selective in vivo crevice corrosion

Herbster, Maria; Harnisch, Karsten; Kriegel, Paulina; Heyn, Andreas; Krüger, Manja; Lohmann, Christoph H.; Bertrand, Jessica; Halle, Thorsten

In: Materials - Basel : MDPI, Bd. 15 (2022), Heft 16, Artikel 5733, insges. 26 S.

Publikationslink

Refractory metal-based high entropy silicide-borides - the future of materials beyond MoSiB?

Galetz, M. C.; Ulrich, A. S.; Hasemann, Georg; Krüger, Manja

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 148 (2022), insges. 1 S.

Publikationslink

Microstructure and properties of powder metallurgical manufactured V-rich V-Si-B alloys for high-temperature application

Schmelzer, Janett; Krüger, Manja

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (XVII, 124 Blätter, 8,23 MB) [Literaturverzeichnis: Blatt 112-124]

Publikationslink

First principles density functional theory prediction of the crystal structure and the elastic properties of Mo2ZrB2 and Mo2HfB2

Touzani, Rachid Stefan; Krüger, Manja

In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 94-95

Publikationslink

Ternary Vss-V3Si-V5SiB2 eutectic reaction in V-SiB system

Yang, Weiguang; Hasemann, Georg; Yazlak, Mustafa; Gorr, Bronislava; Schwaiger, Ruth; Krüger, Manja

In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 165-166

Publikationslink

Biocompatibility of pure refractory metals and their combination as high entropy alloys

Schmelzer, Janett; Hasemann, Georg; Regenberg, Maximilian; Betke, Ulf; Krüger, Manja; Walles, Heike; Scheffler, Michael

In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 172-173

Publikationslink

High-energy synchrotron X-ray in situ observation of ternary eutectic growth in a directionally solidified Mo-Si-B alloy

Hasemann, Georg; Zhu, Linye; Hauschildt, Katja; Blankenburg, Malte; Ida, Shuntaro; Pyczak, Florian; Yoshimi, Kyosuke; Krüger, Manja

In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 55-56

Publikationslink

Microstructure and mechanical properties of a γ-TiAl alloy with a nano-grained surface layer

Stangl, Christoph; Krüger, Manja; Saage, Holger

In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 90-91

Publikationslink

Particle strengthening of additively manufactured Me-SiB (Me = Mo, V) alloys

Schmelzer, Janett; Rittinghaus, Silja-Katharina; Wilms, Markus B.; Michael, Oliver; Krüger, Manja

In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 59-60

Publikationslink

A novel alloy development approach - biomedical high-entropy alloys

Regenberg, Maximilian; Schmelzer, Janett; Hasemann, Georg; Krüger, Manja

In: Intermetallics 2021 - International Conference, 4th till 8th October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021; Krüger, Manja . - 2021, S. 109-110

Publikationslink

A novel alloy development approach - biomedical equiatomic Ta-Nb-Ti alloy

Regenberg, Maximilian; Schmelzer, Janett; Hasemann, Georg; Bertrand, Jessica; Krüger, Manja

In: Metals - Basel : MDPI, Bd. 11 (2021), Heft 11, Artikel 1778, insges. 12 S.

Publikationslink

Temperature resistance of Mo3Si - phase stability, microhardness, and creep properties

Kauss, Olha; Obert, Susanne; Bogomol, Iurii; Wablat, Thomas; Siemensmeyer, Nils; Naumenko, Konstantin; Krüger, Manja

In: Metals - Basel: MDPI, Bd. 11 (2021), 4, insges. 17 S.

Publikationslink

Microstructure evolution and sequence of phase transition reactions through the solidification of Mo-Si-B alloy - a phase-field study

Kazemi, Omid; Hasemann, Georg; Krüger, Manja; Halle, Thorsten

In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 193 (2021), S. 1-7

Publikationslink

Microstructural characterization of arc-melted and directionally solidified near-eutectic molybdenum-silicon-boron alloys

Zhu, Linye; Ida, Shuntaro; Hasemann, Georg; Krüger, Manja; Yoshimi, Kyosuke

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, 132 (2021), Artikel 107131, insgesamt 9 Seiten

Publikationslink

Additive manufacturing of a near-eutectic MoSiB alloy - processing and resulting properties

Fichtner, D.; Schmelzer, Janett; Yang, W.; Heinze, C.; Krüger, Manja

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, 128 (2021), Artikel 107025

Publikationslink

Mo-silicide alloys for high-temperature structural applications

Perepezko, J. H.; Krüger, Manja; Heilmaier, M.

In: Materials Performance and Characterization - West Conshohocken, Pa.: ASTM International, Bd. 10 (2021), 2, S. 122-145

Publikationslink

Synthesis of a lubricant to mimic the biorheological behavior of osteoarthritic and revision synovial fluid

Herbster, Maria; Nizinkovskyi, Rostyslav; Bollmann, Miriam; Bartel, Dirk; Lohmann, Christoph H.; Krüger, Manja; Halle, Thorsten; Bertrand, Jessica

In: Lubricants - Basel : MDPI, Bd. 9 (2021), Heft 9, Artikel 87, insges. 20 S.

Publikationslink

Strengthening of additively manufactured Me-Si-B (Me = Mo, V) by Y2O3 particles

Schmelzer, Janett; Rittinghaus, Silja-Katharina; Wilms, Markus B.; Michael, Oliver; Krüger, Manja

In: International journal of refractory metals & hard materials - Amsterdam [u.a.]: Elsevier Science, Bd. 101 (2021)

Publikationslink

Refractory metal coated alumina foams as support material for stem cell and fibroblasts cultivation

Hasemann, Georg; Betke, Ulf; Krüger, Manja; Walles, Heike; Scheffler, Michael

In: Materials - Basel: MDPI, Bd. 14 (2021), Heft 11, Artikel 2813

Publikationslink

Oxidation-resistant environmental barrier coatings for Mobased alloys - a review

Gatzen, Caren; Smokovych, Iryna; Scheffler, Michael; Krüger, Manja

In: Advanced engineering materials - Weinheim: Wiley-VCH Verl., Bd. 23 (2021), 4

Publikationslink

In situ observation of ternary eutectic growth in a directionally solidified MoSiB alloy using highenergy synchrotron Xrays

Hasemann, Georg; Zhu, Linye; Hauschildt, Katja; Blankenburg, Malte; Ida, Schuntaro; Pyczak, Florian; Yoshimi, Kyosuke; Krüger, Manja

In: Advanced engineering materials - Weinheim: Wiley-VCH Verl., Bd. 23 (2021), 11, insges. 9 S.

Publikationslink

Intermetallics 2021 - International Conference, 04-08 October 2021 : Educational Center Kloster Banz, Germany : programme and abstracts

Krüger, Manja

In: Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2021, 1 Online-Ressource (206 Seiten), IllustrationenKongress: Intermetallics 5 (Bad Staffelstein : 2021.10.04-08)

Publikationslink

Deformation twinning in bcc iron - experimental investigation of twin formation assisted by molecular dynamics simulation

Ecke, Martin; Michael, Oliver; Wilke, Markus; Hütter, Sebastian; Krüger, Manja; Halle, Thorsten

In: Plasticity, damage and fracture in advanced materials - Cham : Springer ; Altenbach, Holm . - 2020, S. 43-51 - ( Advanced structured materials; 121)

Publikationslink

Structural analysis of gas turbine blades made of Mo-Si-B under stationary thermo-mechanical loads

Kauss, Olha; Naumenko, Konstantin; Hasemann, Georg; Krüger, Manja

In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 79-91 - (Advanced structured materials; 117)

Publikationslink

Microstructure-property relations of eutectic V-Si and V-B alloys

Regenberg, Maximilian; Hasemann, Georg; Müller, Christopher; Krüger, Manja

In: IOP conference series / Institute of Physics - London [u.a.] : Institute of Physics - Vol. 882 (2020), Paper 012014, insgesamt 12 Seiten

Publikationslink

Microstructure evolution and mechanical properties of refractory Mo-Nb-V-W-Ti high-entropy alloys

Regenberg, Maximilian; Hasemann, Georg; Wilke, Markus; Halle, Thorsten; Krüger, Manja

In: Metals - Basel: MDPI, Vol. 10 (2020), 11, Article 1530, insgesamt 13 Seiten

Publikationslink

Polymer derived ceramics from Si, B, SiB6, and Mo5SiB2 filler-loaded perhydropolysilazane precursors as protective and functional coatings for refractory metal alloys

Smokovych, Iryna; Gatzen, Caren; Krüger, Manja; Schwidder, Michael; Scheffler, Michael

In: Materials - Basel: MDPI, Vol. 13 (2020), 21, Article 4878, insgesamt 11 Seiten

Publikationslink

Phase and microstructural characterizations for Ce 0.8 Gd 0.2 O 2- -FeCo 2 O 4 dual phase oxygen transport membranes

Zeng, Fanlin; Malzbender, Jürgen; Baumann, Stefan; Krüger, Manja; Winnubst, Louis; Guillon, Olivier; Meulenberg, Wilhelm A.

In: Journal of the European Ceramic Society/ European Ceramic Society - Amsterdam [u.a.]: Elsevier Science, Bd. 40.2020, 15, S. 5646-5652

Publikationslink

First principles density functional theory prediction of the crystal structure and the elastic properties of Mo 2ZrB 2 and Mo 2HfB 2

Touzani, Rachid Stefan; Krüger, Manja

In: Crystals - Basel: MDPI, Volume 10 (2020), issue 10, article 865, 14 Seiten

Publikationslink

Coating reactions on vanadium and V-Si-B Alloys during powder pack-cementation

Hasemann, Georg; Harris, Chad; Krüger, Manja; Perepezko, John H.

In: Materials - Basel: MDPI, Volume 13 (2020), issue 18, article 4099, 7 Seiten

Publikationslink

A zone melting device for the in situ observation of directional solidification using high-energy synchrotron x rays

Gombola, C.; Hasemann, Georg; Kauffmann, A.; Sprenger, I.; Laube, S.; Schmitt, A.; Gang, F.; Bolbut, Volodymyr; Oehring, M.; Blankenburg, M.; Schell, N.; Staron, P.; Pyczak, F.; Krüger, Manja; Heilmaier, M.

In: Review of scientific instruments - [S.l.] : American Institute of Physics - Volume 91 (2020), issue 9, article 093901, 10 Seiten

Publikationslink

Influence of Nb, Ti and Mo on microstructure and mechanical properties of vanadium solid solutions

Müller, Christopher; Touzani, Rachid S.; Betke, Ulf; Krüger, Manja

In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), 012012, insgesamt 10 Seiten[ Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]

Publikationslink

Recent advances in additive manufacturing of Mo-Si-B alloys - a status report onthe cooperative project LextrA

Krüger, Manja; Schmelzer, Janett; Fichtner, D.; Heinze, C.; Küsters, Y.; Rittinghaus, S. K.; Weisheit, A.; Heinz, R.; Gerking, L.; Gruber, K; Schmigalla, S.; Schulze, S.

In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012011, insgesamt 9 Seiten[ Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]

Publikationslink

Oxidation response of additively manufactured eutectic Mo-Si-B alloys

Becker, Julia; Fichtner, D.; Schmigalla, S.; Schultze, S.; Heinze, C.; Küsters, Y.; Hasemann, Georg; Schmelzer, Janett; Krüger, Manja

In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012002, insgesamt 9 Seiten[Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]

Publikationslink

The effects of Zr and La2O3 additions on the microstructural and mechanical properties of a Mo-6Si-5B alloy

Becker, Julia; Giese, Marcel; Krüger, Manja

In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012001, insgesamt 7 Seiten[Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]

Publikationslink

First principles density functional theory calculations on the elastic properties of Mo-Si based solid solutions

Touzani, Rachid; Krüger, Manja

In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012024, insgesamt 10 Seiten[Symposium: Symposium on Materials and Joining Technology, Magdeburg, Germany, 7-8 September 2020]

Publikationslink

Fracture toughness of single grains and polycrystalline Li7La3Zr2O12 electrolyte material based on a pillar splitting method

Nonemacher, Juliane Franciele; Arinichevab, Yulia; Yan, Gang; Finsterbusch, Martin; Krüger, Manja; Malzbender, Jürgen

In: Journal of the European Ceramic Society/ European Ceramic Society - Amsterdam [u.a.]: Elsevier Science, Bd. 40.2020, 8, S. 3057-3064

Publikationslink

Printability and microstructural evolution of a near-eutectic three-phase V-based alloy

Schmelzer, Janett; Rittinghaus, Silja-Katharina; Gruber, Karl; Veit, Peter; Weisheit, Andreas; Krüger, Manja

In: Additive manufacturing - Amsterdam [u.a.]: Elsevier, Vol. 34 (2020), Artikelnummer 101208

Publikationslink

Microstructure and compression properties of VSSV3B2 eutectic alloys in the V-Si-B system

Müller, Christopher; Hasemann, Georg; Regenberg, Maximilian; Betke, Ulf; Krüger, Manja

In: Materials - Basel: MDPI, Volume 13 (2020), issue 9, article 2100, 12 Seiten

Publikationslink

Micromechanical characterization of Ce0.8Gd0.2O2FeCo2O4 dual phase oxygen transport membranes

Zeng, Fanlin; Malzbender, Jürgen; Baumann, Stefan; Schulze-Küppers, Falk; Krüger, Manja; Nijmeijer, Arian; Guillon, Olivier; Meulenberg, Wilhelm Albert

In: Advanced engineering materials - Weinheim: Wiley-VCH Verl., Bd. 22 (2020), 6

Publikationslink

Failure analysis of coatings under thermo-mechanical loading

Nordmann, Joachim; Altenbach, Holm; Krüger, Manja

In: Magdeburg, 2020, xv, 110 Seiten, A1-A6, B1-B6, Illustrationen, Diagramme, 30 cm

Alloying effects in vanadium solid solutions

Müller, Christopher; Hasemann, Georg; Krüger, Manja

In: Beyond Nickel-Based Superalloys III: Nara, Japan, Jun 11-14, 2019 : program - Kyoto University, 2019 . - 2019

Microstructure-property relationship of vanadium solid solutions, two-phase and three-phase alloys

Müller, Christopher; Hasemann, Georg; Krüger, Manja

In: 2018 MRS Fall meeting & exhibit - Materials Research Society, 2018, 2018, ID PM06.04.07

Publikationslink

Alloying effects in vanadium solid solutions

Müller, Christopher; Hasemann, Georg; Krüger, Manja

In: Intermetallics 2019 - Jena, Germany: Conventus Congressmanagement & Marketing GmbH, 2019; Heilmaier, Martin, 2019, Poster-ID: p-28, Seite 214

Publikationslink

Effects of second phases in Mo-Zr Alloys - a study on phase evolution and mechanical properties

Becker, Julia; Siems, Heiko F.; Krüger, Manja

In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2019, S. 93-105

Publikationslink

Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads

Kauss, Olha; Tsybenko, H.; Naumenko, Konstantin; Hütter, Sebastian; Krüger, Manja

In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 165 (2019), S. 129-136

Publikationslink

Structure formation and mechanical properties of the high-entropy AlCuNiFeCr alloy prepared by mechanical alloying and spark plasma

Yurkova, A. I.; Cherniavsky, V. V.; Bolbut, Volodymyr; Krüger, Manja; Bogomol, Iurii

In: Journal of alloys and compounds - Lausanne: Elsevier, Bd. 786 (2019), S. 139-148

Publikationslink

Addition of carbon fibers into B4C infiltrated with molten silicon

Solodkyi, I.; Bezdorozhev, O.; Vterkovskiy, M.; Bogomol, Iurii; Bolbut, Volodymyr; Krüger, Manja; Badica, P.; Loboda, P.

In: Ceramics international - Amsterdam [u.a.]: Elsevier Science, Bd. 45 (2019), 1, S. 168-174

Publikationslink

Site preference of V and its influence on the elastic properties in the boride series VxMo5-xSiB2 as studied by first principles density functional theory

Touzani, Rachid Stefan; Becker, Julia; Krüger, Manja

In: Journal of alloys and compounds: JAL ; an interdisciplinary journal of materials science and solid-state chemistry and physics - Lausanne: Elsevier . - 2019

Publikationslink

Experimental assessment of the microstructure evolution and liquidus projection in the Mo-rich Mo-Si-B system

Hasemann, Georg; Ida, S.; Zhu, L.; Iizawa, T.; Yoshimi, K.; Krüger, Manja

In: Materials and design - Amsterdam [u.a.]: Elsevier Science, Vol. 185 (2020), Artikel 108233, insgesamt 13 Seiten

Publikationslink

Polymer derived ceramic materials from Si, B and MoSiB filler-loaded Perhydropolysilazane Precursor for oxidation protection

Smokovych, Iryna; Krüger, Manja; Scheffler, Michael

In: Journal of the European Ceramic Society - Amsterdam [u.a.]: Elsevier Science, Bd. 39 (2019), 8, S. 3634-3642

Publikationslink

Controversial discussion on the existence of the Hf and Zr monoborides and experimental proof by atom probe tomography

Bolbut, Volodymyr; Seils, S.; Boll, T.; Chassaing, D.; Krüger, Manja

In: Materialia - Amsterdam: Elsevier, Vol. 6 (2019), Artikel 100322

Publikationslink

Processing of Mo silicide powders as filler particles in polymer-derived ceramic coatings for Mo-Si-B substrates

Krüger, Manja; Schmelzer, Janett; Smokovych, Irina; Lopez Barillao, Jennifer; Hasemann, Georg

In: Powder technology - Amsterdam [u.a.]: Elsevier Science, Bd. 352 (2019), S. 381-385

Publikationslink

Microstructure and cyclic oxidation behavior of APS TBC systems drilled with various laser methods

Ebrahimzade, V.; Uchtmann, H.; Singheiser, L.; Krüger, Manja; Malzbender, J.

In: Surface and coatings technology - Amsterdam [u.a.] : Elsevier Science - Vol. 383 (2020), Artikelnr. 125018

Publikationslink

Anisotropy of the mechanical properties of Li1·3Al0·3Ti1·7(PO4)3 solid electrolyte material

Yan, Gang; Yu, Shicheng; Yang, Weiguang; Li, Xiaoqiang; Tempel, Hermann; Kungl, Hans; Eichel, Rüdiger-A.; Krüger, Manja; Malzbender, Jürgen

In: Journal of power sources: the international journal on the science and technology of electrochemical energy systems - New York, NY [u.a.]: Elsevier, Vol. 437 (2019), Artikel 226940

Publikationslink

The potential of mechanical alloying to improve the strength and ductility of Mo-9Si-8B-1Zr alloys - experiments and simulation

Krüger, Manja; Kauss, Olha; Naumenko, Konstantin; Burmeister, C.; Wessel, E.; Schmelzer, Janett

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Vol. 113 (2019), Artikel 106558

Publikationslink

Tailored oxidation barrier coatings for Mo-Hf-B and Mo-Zr-B alloys

Smokovych, Iryna; Bolbut, Volodymyr; Krüger, Manja; Scheffler, Michael

In: Materials - Basel: MDPI, Volume 12 (2019), issue 14, article 2215, insgesamt 13 Seiten

Publikationslink

Room temperature plastic deformability in V-rich VSiB alloys

Hasemann, Georg; Müller, Christopher; Grüner, D.; Wessel, E.; Krüger, Manja

In: Acta materialia - Amsterdam [u.a.]: Elsevier Science, Bd. 175 (2019), S. 140-147

Publikationslink

Development and implementation of a cyclic plasticity model with thermal softening for hot work tool steel

Jilg, Andreas; Altenbach, Holm; Krüger, Manja

In: Magdeburg, 2019, X, 104 Seiten, Illustrationen, Diagramme, 21 cm

Development of density reduced Mo-Si-B alloys

Becker, Julia; Krüger, Manja; Skrotzki, Birgit

In: Barleben: docupoint Verlag, 2020, XVI, 117 Seiten, Illustrationen, Diagramme, 21 cm - (docupoint Wissenschaft; Micro-macro transactions; Volume 36)

Advances in mechanics of high-temperature materials

Naumenko, Konstantin; Krüger, Manja

In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 117), ISBN: 978-3-030-23869-8

Publikationslink

Laser additive manufacturing of intermetallic alloys for high-temperature applications

Rittinghaus, Silja-Katharina; Schmelzer, Janett; Wilms, Markus B.; Krüger, Manja

In: Industrial perspectives in additive technologies - Örebro, Sweden; The Austrian Society for Metallurgy and Materials . - 2019, S. 110-117

Phase stability and temperature-dependent compressive strength of a low-density Fe 32.3Al 29.3Cu 11.7Ni 10.8Ti 15.9 alloy

Bolbut, Volodymyr; Wessel, Egbert; Krüger, Manja

In: Scripta materialia- Amsterdam [u.a.]: Elsevier Science, 1996, Bd. 150.2018, S. 54-56

Publikationslink

Microstructure and mechanical properties of a directionally solidified Mo-12Hf-24B alloy

Bolbut, Volodymyr; Bogomol, Iurii; Loboda, P.; Krüger, Manja

In: Journal of alloys and compounds- Lausanne: Elsevier, 1991, Bd. 735.2018, S. 2324-2330

Publikationslink

Vacancy effects on the mechanical behavior of B2-FeAl intermetallics

Zamanzade, M.; Hasemann, Georg; Motz, C.; Krüger, Manja; Barnoush, A.

In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 712.2018, S. 88-96

Publikationslink

Alloying effects in Mo-5X (X=Zr, Ti,V) Microstructural modifications and mechanical properties

Becker, Julia; Betke, Ulf; Wessel, Egbert; Krüger, Manja

In: Materials today / Communications - Amsterdam [u.a.]: Elsevier, 2014, Bd. 15.2018, S. 314-321

Publikationslink

Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests

Nordmann, Joachim; Thiem, Philipp; Cinca, Nuria; Naumenko, Konstantin; Krüger, Manja

In: The journal of strain analysis for engineering design : JSA - London : Sage Publ., Bd. 53.2018, 4, S. 255-265

Publikationslink

Printability of gas atomized Mo-Si-B powders by laser metal deposition

Schmelzer, Janett; Rittinghaus, S.-K.; Weisheit, A.; Stobik, M.; Paulus, J.; Gruber, K.; Wessel, E.; Heinze, C.; Krüger, Manja

In: International journal of refractory metals & hard materials - Amsterdam [u.a.]: Elsevier Science, Bd. 78.2019, S. 123-126, 2018[Online first]

Publikationslink

Prediction of thermodynamic properties of Mo-Si-B alloys from first-principles calculations

Hütter, Sebastian; Hasemann, Georg; Al-Karawi, J.; Krüger, Manja; Halle, Thorsten

In: Metallurgical and materials transactions / A - Boston: Springer, Bd. 49.2018, 12, S. 6075-6083

Publikationslink

Density reduction of Mo-Si-B alloys by vanadium alloying

Becker, Julia; Betke, Ulf; Hoffmeister, Michael; Krüger, Manja

In: JOM: a publication of the Minerals, Metals & Materials Society (TMS) - New York, NY: Springer Science + Business Media, 1989, Bd. 70.2018, 11, S. 2574-2581

Publikationslink

Microstructures of ternary eutectic refractory Me-Si-B (Me = Mo, V) alloy systems

Hasemann, Georg; Krüger, Manja; Palm, Martin; Stein, Frank

In: Materials science forum - Uetikon: Trans Tech Publ., Bd. 941.2018, S. 827-832

Publikationslink

Modeling inelastic behaviour of Al-rich Ti-Al alloys at ultra-high homologous temperature

Chowdhury, Helal; Naumenko, Konstantin; Krüger, Manja

In: Barleben: docupoint Verlag, 2018, 153 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 30)

Development of Mo-Hf-B and Mo-Zr-B alloys for high-temperature application

Bolbut, Volodymyr; Krüger, Manja; Halle, Thorsten

In: Magdeburg, 2018, XIV, 82 Blätter, Illustrationen, 30 cm[Literaturverzeichnis: Blatt 76-82]

Additive Fertigung gasverdüster Mo-Si-B Pulver durch Laserauftragsschweißen

Schmelzer, Janett; Rittinghaus, S.-K.; Weisheit, A.; Stobik, M.; Paulus, J.; Gruber, K.; Wessel, E.; Krüger, Manja; Heinze, C.

In: Fachtagung Werkstoffe und Additive Fertigung: 25.-26.04.2018, Potsdam : Tagungsband - Sankt Augustin: Deutsche Gesellschaft für Materialkunde e. V., S. 244-249[Konferenz: DGM-Tagung, 25.-26. April 2018, Potsdam]

Formation of silicides in mechanically alloyed V-Si solid solution powders

Schmelzer, Janett; Günther, Christoph Daniel; Krüger, Manja

In: Intermetallics 2017 - Bad Staffelstein: Educational Center Kloster Banz, 2017, S. 117-118[Konferenz: Intermetallics 2017]

Microstructure and creep properties of near-eutectic Mo-Zr-B and Mo-Hf-B alloys

Bolbut, Volodymyr; Krüger, Manja

In: Intermetallics 2017 - Bad Staffelstein: Educational Center Kloster Banz, 2017, S. 119-120[Konferenz: Intermetallics 2017]

Alloy design and microstructure of refractory Mo-V-Nb-W-Tix HEAs

Hasemann, Georg; Wilke, Markus; Halle, Thorsten; Krüger, Manja

In: Intermetallics 2017 - Bad Staffelstein: Educational Center Kloster Banz, 2017, S. 97-98[Konferenz: Intermetallics 2017]

Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system

Popovych, Olha; Bogomol, Iurii; Naumenko, Konstantin; Krüger, Manja

In: Konferenz: Intermetallics 2017, Intermetallics 2017 - Bad Staffelstein : Educational Center Kloster Banz, S. 115-116

Publikationslink

Innovative metallische Hochtemperaturwerkstoffe

Krüger, Manja; Halle, Thorsten

In: Magdeburg, 2017, 147 Seiten, Illustrationen, Diagramme, 30 cm[Es handelt sich um eine kumulative Schrift, die aus Artikeln und einem vorangestellten Beitrag besteht.; Literaturverzeichnis: Seite 47-60]

Der Einfluss der Legierungselemente Ti, V und Zr auf die mechanischen Eigenschaften des Mo-Mischkristalls

Becker, Julia; Krüger, Manja

In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017: Magdeburg, 08. und 09. September 2017/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Universitätsbibliothek; Mook, Gerhard . - 2017, S. 169-178

Publikationslink

Gerichtet erstarrte Mo-Zr-B- und Mo-Hf-B-Legierungen

Bolbut, Volodymyr; Bogomol, Iurii; Krüger, Manja

In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg: Universitätsbibliothek, 2017, S. 179-184

Bildung von Siliziden in mechanisch legierten V-Si Mischkristallpulvern

Schmelzer, Janett; Baumann, Torben; Dieck, Sebastian; Krüger, Manja

In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg: Universitätsbibliothek, 2017, S. 161-168

Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln

Popovych, Olha; Naumenko, Konstantin; Krüger, Manja

In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017 , korrigierte Auflage - Magdeburg : Universitätsbibliothek, S. 185-192

Publikationslink

Process-oriented microstructure evolution of V SS-V 3Si-V 5SiB 2 materials

Krüger, Manja; Köppe-Grabow, Birte

In: Practical metallography: preparation, imaging and analysis of microstructures - München: Hanser, Bd. 54.2017, 5, S. 293-307[Online unter:

Publikationslink

Gerichtet erstarrte Mo-Zr-B-Legierungen

Bolbut, Volodymyr; Bogomol, Iurii; Bauer, C.; Krüger, Manja

In: Materials science and engineering technology - Weinheim: Wiley-VCH, 1970, Bd. 48.2017, S. 1113-1124

Publikationslink

Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature

Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja

In: Archive of applied mechanics - Berlin: Springer, insges. 17 S., 2017

Publikationslink

Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry

Chowdhury, Helal; Altenbach, Holm; Krüger, Manja; Naumenko, Konstantin

In: Mechanics of advanced materials and modern processes - Berlin: Springer, 2015, Bd. 3.2017, insges. 20 S.

Publikationslink

Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C

Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja

In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 700.2017, S. 503-511

Publikationslink

Prediction of phase distribution pattern in phase field simulations on Mo 5SiB 2-primary areas in near eutectic Mo-Si-B alloy

Kazemi, 0.; Hasemann, G.; Krüger, Manja; Halle, Thorsten

In: IOP conference series / Materials science and engineering - London [u.a.]: Institute of Physics, 2009, Vol. 181.2017, Art. 012033, insgesamt 7 S.[Kongress: 19th Chemnitz Seminar on Materials Engineering,16./17. March 2017, Chemnitz, Germany]

Publikationslink

Polymer derived oxidation barrier coatings for Mo-Si-B alloys

Smokovych, Iryna; Hasemann, Georg; Krüger, Manja; Scheffler, Michael

In: Journal of the European Ceramic Society - Amsterdam [u.a.] : Elsevier Science, Bd. 37 (2017), Heft 15, S. 4559-4565

Publikationslink

Comparison of microstructure and adhesion strength of plasma, flame and high velocity oxy-fuel sprayed coatings from an iron aluminide powder

Thiem, Philipp G.; Chornyi, A.; Smirnov, L. V.; Krüger, Manja

In: Surface and coatings technology - Amsterdam [u.a.]: Elsevier Science, 1986, Bd. 324.2017, S. 498-508

Publikationslink

Microstructure and properties of near-eutectic Mo-Si-B alloys for high temperature applications

Hasemann, Georg; Krüger, Manja

In: Aachen, Shaker Verlag, 2017, XIV, 90 Seiten, 27 Illustrationen, Diagramme, 21 cm, 158 g - (Berichte aus der Werkstofftechnik), ISBN 978-3-8440-5408-8[Literaturverzeichnis: Seite 77-88]

Einfluss der Oberflächenmodifizierung auf die Fließeigenschaften von kohäsiven Schüttgütern

Todorova, Zinaida Ivanova; Scheffler, Franziska; Krüger, Manja

In: Barleben: docupoint Verlag, 2017, X, 136 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 29)

Near-eutectic ternary Mo-Si-B alloys - microstructures and creep properties

Hasemann, Georg; Kaplunenko, D.; Bogomol, Iurii; Krüger, Manja

In: JOM: a publication of the Minerals, Metals & Materials Society (TMS) - New York, NY: Springer Science + Business Media, Bd. 68.2016, 11, S. 2847-2853

Publikationslink

Microstructure evolution of a directionally solidified ternary eutectic Mo-Si-B alloy

Krüger, Manja; Hasemann, Georg; Kazemi, Omid; Halle, Thorsten

In: Materials science forum - Baech: Trans Tech Publications Ltd., Bd. 879 (2016), S. 1226-1232

Publikationslink

Structure and Properties of Directionally Solidified Mo-8.7 Si-18 B Alloys

Bogomol, Iurii; Popovych, Olha; Krüger, Manja; Loboda, Petro

In: Research Bulletin of the National Technical University of Ukraine "Kyiv Politechnic Institute", Kyiv Politechnic Institute, 2016, Bd. 0, Heft 2, S. 69

Publikationslink

Microstructure variations and creep properties of novel high temperature V-Si-B materials

Krüger, Manja; Bolbut, Volodymyr; Gang, Florian; Hasemann, Georg

In: JOM - New York, NY: Springer Science + Business Media, Bd. 68 (2016), 11, S. 2811-2816

Publikationslink

Similarities and differences in mechanical alloying processes of V-Si-B and Mo-Si-B powders

Krüger, Manja; Schmelzer, Janett; Helmecke, Maria

In: Metals: open access journal - Basel: MDPI, 2011, Vol. 6.2016, 10, Art. 241, insgesamt 16 S.

Publikationslink

High temperature compression strength and oxidation of a V-9Si-13B alloy

Krüger, Manja

In: Scripta materialia - Amsterdam [u.a.]: Elsevier Science, Bd. 121.2016, S. 75-78

Publikationslink

Phase field simulation of a directional solidification of a ternary eutectic Mo-Si-B Alloy

Kazemi, O.; Hasemann, Georg; Krüger, Manja; Halle, Thorsten

In: IOP conference series / Materials science and engineering - London [u.a.]: Institute of Physics, Vol. 118.2016, 1, Art. 012028, insgesamt 9 S.[18th Chemnitz Seminar on Materials Engineering]

Publikationslink

Hardening of VSi alloys during high energy ball milling

Schmelzer, Janett; Baumann, Torben; Dieck, Sebastian; Krüger, Manja

In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 294.2016, S. 493-497

Publikationslink

Struktura i vlastivosti sprjamovano zakristalizovanogo splavu sistemi Mo-8,7 Si-18 B

Bogomol, Iurii; Popovych, Olha; Hasemann, Georg; Krüger, Manja; Loboda, P. I.

In: Naukovi visti Nacional'noho Techninoho Universytetu Ukraïny Kyïvs'kyj Politechninyj Instytut: naukovo-techninyj urnal - Kyïv, 2, S. 69-76, 2016

Finite element simulation of lamellar coppersilver composites

Dodla, Srihari; Bertram, Albrecht; Krüger, Manja

In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, 1992, Bd. 101.2015, S. 29-38

Publikationslink

Simulation of flow behavior and texture evolution of Cu-Ag composites incorporating XRD data

Dodla, Srihari; Bertram, Albrecht; Krüger, Manja

In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst, 1980, Bd. 35.2015, 2, S. 71-79

Publikationslink

Mechanical properties and failure probability of compact agglomerates

Russell, Alexander; Schmelzer, Janett; Müller, Peter; Krüger, Manja; Tomas, Jürgen

In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 286.2015, S. 546-556

Publikationslink

Microstructure, flow behavior, and bulk texture evolution of cold drawn copper-silver composites

Dodla, S.; Thiem, Philipp; Krüger, Manja; Dietrich, D.; Bertram, Albrecht

In: Journal of alloys and compounds - Lausanne: Elsevier, 1991, Bd. 647.2015, S. 519-527

Publikationslink

Impact of phase distribution on the fracture toughness of high temperature resistant Mo-Si-B Alloys - Der Einfluss der Phasenverteilung auf die Bruchzähigkeit von hochtemperatur-beständigen Mo-Si-B-Legierungen

Becker, Julia; Krüger, Manja

In: Practical metallography - Berlin: de Gruyter, Bd. 52 (2015), 6, S. 295-313

Publikationslink

Polymer-derived ceramics as innovative oxidation barrier coatings for Mo-Si-B alloys

Hasemann, Georg; Baumann, Torben; Dieck, Sebastian; Rannabauer, Stefan; Krüger, Manja

In: Metallurgical and materials transactions / A - Boston: Springer, Bd. 46.2015, 4, S. 1455-1460

Publikationslink

Experimental investigations and numerical simulations of lamellar Cu-Ag composites

Dodla, Srihari; Bertram, Albrecht; Krüger, Manja

In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015: Barleben: Docupoint-Verl., XIX, 130 S., Ill., graph. Darst., 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; 16)

Identification technique of mechanism-based constitutive model for cast iron under thermo-mechanical loads

Ievdokymov, Mykola; Altenbach, Holm; Krüger, Manja

In: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2015, IX, 132 S., graph. Darst.

Der Einfluss der Korngrösse und der Phasenverteilung auf die Bruchzähigkeit von Mo-Si-B-Legierungen

Köppl, Julia; Krüger, Manja

In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 119-126 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13

Mikrostruktur und Oxidationsbeständigkeit der Legierung Mo-8,7Si-17,4B

Bolbut, Volodymyr; Hasemann, Georg; Bogomol, Iurii; Loboda, P. I.; Krüger, Manja

In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 135-142 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13

APS gespritzte Beschichtung aus Eisenaluminidpulvern unter thermischer und mechanischer Belastung

Thiem, Philipp Georg; Chorny, A.; Smirnov, I.; Krüger, Manja; Halle, Thorsten

In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 157-164 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13

Charakterisierung von Verformungszwillingen in Meteoriten und kubisch-raumzentrierten Eisenwerkstoffen mittels Rückstreuelektronenbeugung (EBSD)

Ecke, Martin; Wendt, U.; Heyse, Hartmut; Krüger, Manja

In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 , 2014 - Magdeburg : Univ., S. 149-156 Kongress: Sommerkurs Werkstoffe und Fügen 15 Magdeburg 2014.09.12-13

Mikrostruktur und Kriechverhalten einer nah-eutektischen gerichtet erstarrten Mo-Si-B-Legierung

Hasemann, Georg; Bogomol, Iurii; Schliephake, Daniel; Loboda, Petr I.; Krüger, Manja

In: 15. Sommerkurs Werkstoffe und Fügen: Magdeburg, 12. und 13. September 2014 - Magdeburg: Univ., S. 127-134Kongress: Sommerkurs Werkstoffe und Fügen 15 (Magdeburg : 2014.09.12-13)

Oxidationsschutz von Molybdän-Basiswerstoffen durch Beschichtung mit präkeramischen Polymeren

Dieck, Sebastian; Baumann, Torben; Hasemann, Georg; Rannabauer, Stefan; Krüger, Manja

In: 15. Sommerkurs Werkstoffe und Fügen - Magdeburg, 12. und 13. September 2014 - Magdeburg: Univ., S. 143-148, 2014Kongress: Sommerkurs Werkstoffe und Fügen 15 (Magdeburg : 2014.09.12-13)

Werkstoffe

Scheffler, Michael; Halle, Thorsten; Krüger, Manja; Heyn, Andreas

In: Integrated Design Engineering - Ein interdisziplinäres Modell für die ganzheitliche Produktentwicklung / Vajna , Sándor - Berlin, Heidelberg : Springer Vieweg ; Vajna, Sándor *1952-* . - 2014, S. 199-238

Publikationslink

Vacancy strengthening in Fe 3Al iron aluminides

Hasemann, Georg; Schneibel, J. H.; Krüger, Manja; George, E. P.

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 54.2014, S. 95-103

Publikationslink

Microstructure and creep properties of a near-eutectic directionally solidified multiphase Mo-Si-B alloy

Hasemann, Georg; Bogomol, Iurii; Schliephake, Daniel; Loboda, Petr I.; Krüger, Manja

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 48.2014, S. 28-33

Publikationslink

Correlation between microstructure and properties of fine grained Mo-Mo 3Si-Mo 5SiB 2 alloys

Krüger, Manja; Jain, P.; Kumar, K. S.; Heilmaier, M.

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Bd. 48.2014, S. 10-18

Publikationslink

Characterization of deformation twins in meteorites an dynamically loaded ferrous materials by means of Electron Backscatter Diffraction, EBSD - Charakterisierung von Verformungszwillingen in Meteoriten und dynamisch beanspruchten Eisenwerkstoffen mittels Rückstreuelektronenbeugung, EBSD

Ecke, Martin; Schwarz, Friederike; Krüger, Lutz; Wilke, Markus; Heyse, Hartmut; Wendt, Ulrich; Krüger, Manja

In: Practical metallography - München : Hanser, Bd. 51 (2014), Heft 11, S. 765 - 784

Development of novel metallic high temperature materials by microstructural design

Heilmaier, Martin; Rösler, Joachim; Mukherji, Debashis; Krüger, Manja

In: Microstructural design of advanced engineering materials - Weinheim : Wiley-VCH-Verl. . - 2013, S. 467-494

A study on effect of reactive and rare earth element additions on the oxidation behavior of MoSiB system

Majumdar, Sanjib; Burk, S.; Schliephake, D.; Krüger, Manja; Christ, H.-J.; Heilmaier, M.

In: Oxidation of metals - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 80 (2013), Heft 3/4, S. 219-230

Publikationslink

Multiphase Mo-Si-B alloys processed by directional solidification

Krüger, Manja; Hasemann, Georg; Bogomol, Iurii; Loboda, Petr I.

In: MRS online proceedings library / Materials Research Society - Warrendale, Pa. : MRS, Bd. 1516 (2013)

Publikationslink

Effects of Zr additions on the microstructure and the mechanical behavior of PM Mo-Si-B alloys

Krüger, Manja; Schliephake, Daniel; Jain, P.; Kumar, K. S.; Schumacher, G.; Heilmaier, M.

In: JOM - New York, NY : Springer Science + Business Media, Bd. 65 (2013), Heft 2, S. 301-306

Publikationslink

Vergleichende Untersuchungen zum Rissausbreitungsverhalten von intermetallischen Werkstoffen für Hochtemperaturanwendungen

Krüger, Manja; Dietze, Gabriele; Sturm, Daniel; Schloth, Patrick

In: Fortschritte in der Metallographie - Frankfurt: Inventum . - 2012, S. 161-166

Creep deformation characteristics of Al-rich Ti-Al alloys

Sturm, Daniel; Heilmaier, Martin; Naumenko, Konstantin; Kozhar, Sergii; Krüger, Manja

In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012 . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)

Deformation and fracture of Mo-silicide alloys at ultrahigh temperatures

Krüger, Manja; Saage, H.; Heilmaier, M.; Jain, P.; Kumar, K. S.

In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)

The effects of boron addition on the microstructure and mechanical properties of CoRe-based high-temperature alloys

Mukherji, D.; Rösler, J.; Krüger, Manja; Heilmaier, M.; Bölitz, M.-C.; Völkl, R.; Glatzel, U.; Szentmiklósi, L.

In: Scripta materialia. - Oxford : Elsevier, Bd. 66.2012, 1, S. 60-63

Publikationslink

Effect of ZR additions on the deformation and fracture behaviour of three phase Mo-Si-B alloys

Krüger, Manja; Saage, Holger; Heilmaier, Martin; Jain, Padam; Kumar, K. Sharvan

In: Non-linear response of conventional & advanced materials, and multi-scale modeling/ International Symposium on Plasticity and Its Current Applications - Fulton, Maryland, USA: NEAT Press, 2012 . - 2012, S. 268-270Kongress: International Symposium on Plasticity and its Current Applications 18 (San Juan, Puerto Rico : 2011.01.03-08)

Charakterisierung der mechanischen Eigenschaften einer intermetallischen Fe 3Al-basierten Gusslegierung

Gang, F.; Krüger, Manja; Schneibel, J. H.; Heilmaier, M.

In: 14. Sommerkurs Werkstoffe und Fügen , 2011 - Magdeburg : Universität Magdeburg ; Mook, Gerhard, S. 185-192 Kongress: Sommerkurs Werkstoffe und Fügen 14 Magdeburg 2011.09.23-24

Mechanisches Verhalten von Fe 3Al in Abhängigkeit der vorangegangenen Wärmebehandlung

Hasemann, G.; Schneibel, J. H.; Krüger, Manja; George, E. P.

In: 14. Sommerkurs Werkstoffe und Fügen , 2011 - Magdeburg : Universität Magdeburg ; Mook, Gerhard, S. 201-206 Kongress: Sommerkurs Werkstoffe und Fügen 14 Magdeburg 2011.09.23-24

Der Einfluss des Herstellungsprozesses auf die Eigenschaften von Mo-Si-B-Legierungen

Krüger, Manja; Heilmaier, M.; Shyrska, V.; Loboda, P. I.

In: 14. Sommerkurs Werkstoffe und Fügen , 2011 - Magdeburg : Universität Magdeburg, S. 193-200 Kongress: Sommerkurs Werkstoffe und Fügen 14 Magdeburg 2011.09.23-24

Dependence of the yield stress of Fe3Al on heat treatment

Hasemann, Georg; Schneibel, J. H.; Krüger, Manja; George, E. P.

In: FeAl2011 - Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Lanzarote (Canary Island), 05 - 07 October 2011 - Madrid, S. 109-112

Low cycle fatigue behaviour of Fe3Al-based alloys in comparison with cast Al-Si

Krüger, Manja; Gang, F.; Schneibel, J. H.; Wegener, Matthias; Bähr, Rüdiger; Heilmaier, M.

In: FeAl2011 - Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Lanzarote (Canary Island), 05 - 07 October 2011 / [Facultad de Químicas, Universidad Complutense de Madrid. Conference chairperson: Francisco J. Pérez Trujillo] - Madrid, 2011 . - 2011, S. 117-120

Fatigue resistance of Fe 3 Al-based alloys

Gang, Florian; Krüger, Manja; Laskowsky, Alexandra; Rühe, Heike; Schneibel, Joachim H.; Heilmaier, Martin

In: MRS online proceedings library - Warrendale, Pa. : MRS, Bd. 1295 (2011)

Publikationslink

Modification of MoSi alloy microstructure by small additions of Zr

Mousa, M.; Wanderka, N.; Timpel, M.; Singh, S.; Krüger, Manja; Heilmaier, M.; Banhart, J.

In: Ultramicroscopy. - New York, NY [u.a.] : Elsevier, Bd. 111.2011, 6, S. 706-710

Publikationslink

Oxidation behavior of Mo-Si-B-(X) alloys - macro- and microalloying (X= Cr, Zr, La 2O 3)

Burk, S.; Gorr, B.; Krüger, Manja; Heilmaier, M.; Christ, H.-J.

In: JOM - New York, NY : Springer Science + Business Media, Bd. 63 (2011), Heft 12, S. 32-36

Microstructural and mechanical properties of ternary Mo-Si-B alloys resulting from different processing routes

Krüger, Manja; Heilmaier, Martin; Shyrska, Veronika; Loboda, Petr I.

In: MRS online proceedings library / Materials Research Society - Warrendale, Pa. : MRS, Bd. 1295 (2011)

Publikationslink

Phase continuity in high temperature MoSiB alloys - a FIB-tomography study

Hassomeris, O.; Schumacher, G.; Krüger, Manja; Heilmaier, M.; Banhart, J.

In: Intermetallics. - Barking : Elsevier Science Publ., Bd. 19.2011, 4, S. 470-475

Publikationslink

Beschreibung der Rissausbreitung in ternären Mo-Si-B-Werkstoffen mittels metallographischer Zielpräparation

Krüger, Manja; Dietze, Gabriele

In: Fortschritte in der Metallographie - Frankfurt [Main] : MAT-INFO, Werkstoff-Informationsges. , 2011 ; Wanner, Alexander, S. 165-170 - (Sonderbände der praktischen Metallographie; 43) Kongress: Metallographie-Tagung 45 Karlsruhe 2011.09.14-16

Pulvermetallurgische Herstellung und Charakterisierung von oxidationsbeständigen Molybdänbasislegierungen für Hochtemperaturanwendungen

Krüger, Manja

In: Berlin: Logos, Zugl.: Magdeburg Otto-von-Guericke-Universität, Fakultät für Maschinenbau, Diss., 2010, 185 S., Ill., graph. Darst., 21 cm, ISBN: 978-3-8325-2640-5

Synthesis and characterization of lamellar and fibre-reinforced NiAl-Mo and NiAl-Cr

Haenschke, T.; Gali, A.; Heilmaier, M.; Krüger, Manja; Bei, H.; George, E. P.

In: Journal of physics - Bristol : IOP Publ. , 2004 - 240.2010, Art. 012063, insges. 5 S.

Recent advances in the development of mechanically alloyed Mo silicide alloys

Heilmaier, Martin; Krüger, Manja; Saage, Holger

In: Ductility of bulk nanostructured materials - Stafa-Zurich [u.a.] : ttp, Trans Tech Publ. , 2010 ; Zhao, Yonghao, S. 549-558

Influence of processing on the microstructure and mechanical behaviour of Mo-Si-B alloys

Krüger, Manja; Saage, H.; Heilmaier, M.; Böning, M.; Kestler, H.

In: Journal of physics / Conference series - Bristol : IOP Publ. , 2004 - 240.2010, Art. 012087, insges. 5 S.

Publikationslink

Influence of processing on the microstructure and mechanical properties of Mo-Si-b alloys

Krüger, Manja; Saage, Holger; Heilmaier, M.; Jéhanno, P.; Böning, M.; Kestler, H.; Shyrska, V.; Dudka, A.; Loboda, P.

In: 17th Plansee Seminar 2009 ; Vol. 4 / International Conference on High Performance P-M Materials , 2009 - Reutte - 2009, Art. RM 80 Kongress: Plansee Seminar 17 Reutte 2009.05.25-29

Mechanical properties of mechanically alloyed Mo-Si-B materials for elevated temperature applications

Krüger, Manja; Saage, Holger; Heilmaier, Martin; Jéhanno, Pascal; Böning, Mike

In: Macro- to -nano-scale inelastic behavior of materials: plasticity, fatigue & fracture - Fulton, Md. : NEAT Press . - 2009 Kongress: International Symposium on Plasticity and its Current Applications 15 St. Thomas 2009.01.03-08

Ductilization of MoSi solid solutions manufactured by powder metallurgy

Saage, H.; Krüger, Manja; Sturm, Daniel; Heilmaier, M.; Schneibel, Joachim H.; George, E.; Heatherly, L.; Somsen, Ch.; Eggelere, G.; Yang, Y.

In: Acta materialia - Kidlington : Elsevier Science, Bd. 57 (2009), Heft 13, S. 3895-3901

Metallic materials for structural applications beyond nickel-based superalloys

Heilmaier, M.; Krüger, Manja; Saage, H.; Rösler, J.; Mukherji, D.; Glatzel, U.; Völkl, R.; Hüttner, R.; Eggeler, G.; Somsen, Ch.; Depka, T.; Christ, H.-J.; Gorr, B.; Burk, S.

In: JOM - New York, NY : Springer Science + Business Media, Bd. 61 (2009), Heft 7, S. 61-67

Microstructures of CoReCr, MoSi and MoSiB high-temperature alloys

Depka, T.; Somsen, Ch.; Eggeler, G.; Mukherji, D.; Rösler, J.; Krüger, Manja; Saage, H.; Heilmaier, M.

In: Materials science & engineering - Amsterdam [u.a.] : Elsevier, Bd. 510/511 (2009), S. 337-341

Current status of Mo-Si-B silicide alloys for ultra-high temperature applications

Heilmaier, Martin; Saage, Holger; Krüger, Manja; Jehanno, Pascal; Böning, Mike; Kestler, Heinrich

In: Advanced intermetallic-based alloys for extreme environment and energy applications - Warrendale, Pa. : MRS , 2009 ; Palm, Martin - 2009, Paper-Nr. 1128-U07-07 - (Materials Research Society symposium proceedings; 1128) Kongress: MRS fall meeting Boston, Mass. 2008.12.01-04

Mo-Mo 5SiB 2-Mo 3Si alloys resistant to high temperature oxidation

Jéhanno, P.; Böning, M.; Kestler, H.; Heilmaier, Martin; Krüger, Manja

In: Proceedings of the 7th International Conference on Tungsten, Refractory and Hardmaterials 2008. - Washington, S. 921-931Kongress: International Conference on Tungsten, Refractory and Hardmaterials; 7 (Washington, DC) : 2008.06.08-12

Subsurface imaging using moving electromagnetic fields and surface acoustic waves

Mook, Gerhard; Michel, Fritz; Simonin, Juri; Krüger, Manja; Luther, Mathias

In: Emerging technologies in non-destructive testing . - London [u.a.] : Taylor & Francis, ISBN 978-0-415-46476-5, S. 275-280, 2008Kongress: ETNDT; 4 (Stuttgart) : 2007.04.02-04

Enhanced plasticity of mechanically alloyed Mo-based materials for high temperature applications

Krüger, Manja; Saage, Holger; Heilmaier, Martin; Jéhanno, Pascal; Böning, Mike

In: Mechanics & mechanisms of finite plastic deformation. - Fulton, Md. : NEAT Press, S. 193-195, 2008Kongress: International Symposium on Plasticity and its Current Applications; 14 (Kona, Hawaii) : 2008.01.03-08

Mechanically alloyed Mo-Si-B alloys with continuous a-Mo matrix and improved mechanical proberties

Krüger, Manja; Franz, S.; Saage, Holger; Heilmaier, Martin; Schneibel, J. H.; Jéhanno, P.; Böning, M.; Kestler, H.

In: Intermetallics . - Barking : Elsevier Science Publ., Bd. 16.2008, 7, S. 933-941

Publikationslink

Molybdenum alloys for high temperature applications in air

Jéhanno, P.; Böning, M.; Kestler, H.; Heilmaier, Martin; Saage, Holger; Krüger, Manja

In: Powder metallurgy . - London, Bd. 51.2008, 2, S. 99-102

Publikationslink

Detektion von Defekten in adaptiven CFK-Laminaten mittels bildgebender Laservibrometrie

Krüger, Manja; Mook, Gerhard

In: 13. Sommerkurs Werkstoffe und Fügen/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Univ. . - 2007, S. 224-235

Mo-based silicide alloys with balanced oxidation resistance and mechanical properties

Jéhanno, P.; Böning, M.; Kestler, H.; Heilmaier, Martin; Saage, Holger; Krüger, Manja

In: Advances in powder metallurgy & particulate materials - 2007 ; Vol. 2 - Princeton, NJ: Metal Powder Industries Fed.; Engquist, John Vol. 2 . - 2007, S. 8140-8148Kongress: PowderMet (Denver, Colo. : 2007.05.13-16)

Subsurface imaging using moving electromagnetic fields and surface acoustic waves

Mook, Gehard; Michel, Fritz; Simonin, Jouri; Krüger, Manja; Luther, M.

In: 13. Sommerkurs Werkstoffe und Fügen/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Univ.; Mook, Gerhard . - 2007, S. 217-223

Mechanisches Legieren von Molybdän-Basislegierungen für Hochtemperaturanwendungen

Krüger, Manja; Saage, Holger; Franz, S.; Heilmaier, Martin

In: 13. Sommerkurs Werkstoffe und Fügen/ Sommerkurs Werkstoffe und Fügen - Magdeburg: Univ. . - 2007, S. 10-21

Current status and future trends of mo-based silicide alloys for ultra-high temperature applications

Heilmayer, Martin; Saage, Holger; Krüger, Manja; Jehanno, P.; Böning, M.; Kestler, H.; Drawin, S.

In: Current topics on high temperature materials - [S.l.] . - 2007, S. 245-259 - (JSPS report of the 123rd Committee on Heat Resisting Materials and Alloys; 48.2007,3 Special issue)

Detektion von Defekten in adaptiven CFK-Laminaten mittels bildgebender Laservibrometrie

Krüger, Manja; Mook, Gerhard

In: ZfP-Zeitung . - Berlin, 99, S. 36-41

Publikationslink