apl. Prof. Naumenko

Prof. Konstantin Naumenko
Institut für Mechanik
Aktuelle Projekte
- Dynamics of Curved Laminated Glass Panels Under Impact Loading
Laufzeit: 01.01.2021 - 31.12.2023 - Leonhard-Euler-Programm. Mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.10.2022 - 30.09.2023 - Development and calibration of a constitutive model for POM at finite deformations
Laufzeit: 01.08.2022 - 31.12.2022 - Entwicklung neuartiger Verbundfolien für Glaslaminate mit speziellen optischen, thermischen und mechanischen Eigenschaften, und Erforschung dafür geeigneter, selektiver Prüfmethoden für anspruchsvolle Umgebungsbedingungen OTM-3
Laufzeit: 01.10.2019 - 30.09.2022
Abgeschlossene Projekte
- Leonhard-Euler-Programm, mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.09.2020 - 31.12.2021 - Modeling delamination of self-adhesive polymeric films
Laufzeit: 01.11.2017 - 31.10.2020 - Leonhard-Euler-Programm, mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.09.2019 - 31.08.2020 - Verformungsverhalten und Lebensdauerberechnungen von Turbinenschaufeln aus Ni- und Mo-Basislegierungen
Laufzeit: 01.07.2019 - 30.06.2020 - Constitutive Modeling of Inelastic Deformation in Semi-Cystalline Polymers for Structural Analysis
Laufzeit: 01.01.2019 - 31.10.2019 - Leonhard-Euler-Programm, mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.09.2018 - 31.08.2019 - Verformungsverhalten und Lebensdauerberechnungen von Turbinenschaufeln aus Ni- und Mo-Basislegierungen
Laufzeit: 01.07.2016 - 30.06.2019 - Mikro-Makro-Wechselwirkungen in strukturierten Medien und Partikelsystemen GRK 1554 (1)
Laufzeit: 01.10.2014 - 31.03.2019 - Leonhard-Euler-Programm, Mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.09.2017 - 31.08.2018 - Numerische Simulation dentaler Strukturen
Laufzeit: 01.06.2016 - 30.04.2018 - Leonhard Euler Programm, Mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.09.2014 - 31.08.2017 - Mikro-Makro-Wechselwirkungen in strukturierten Medien und Partikelsystemen GRK 1554
Laufzeit: 01.04.2010 - 30.09.2014 - Leonhard Euler Programm, Mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.09.2012 - 31.08.2014 - Simulation von Peel-Versuchen zur Ermittlung der Adhäsionsenergie für neuartige Polymerfolien
Laufzeit: 01.09.2013 - 30.01.2014 - Leonhard Euler Programm, Mechanische Systeme mit komplexen Werkstoffeigenschaften
Laufzeit: 01.09.2012 - 31.08.2013 - Langzeitdehnwechselverhalten (LCF-Ermüdung) von großen Dampfturbinenkomponenten im Hochtemperaturbereich
Laufzeit: 01.08.2009 - 31.07.2012 - Power plant component design using creep damage analysis
Laufzeit: 01.12.2007 - 31.08.2008
2022
Begutachteter Zeitschriftenartikel
A non-linear direct peridynamics plate theory
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 279 (2022)
Damage patterns in float glass plates - experiments and peridynamics analysis
In: Theoretical and applied fracture mechanics - Amsterdam: North-Holland, Bd. 118 (2022)
Buchbeitrag
Influence of thermal stabilisation on the thermal regime in the strapdown inertial navigation system
In: Material Modeling and Structural Mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. 177-188 - (Advanced structured materials; volume 161)
Herausgeberschaft
Material Modeling and Structural Mechanics
In: Cham: Imprint: Springer, 2022., 1st ed. 2022., 1 Online-Ressource(XXII, 336 p. 163 illus., 131 illus. in color.) - (Springer eBook Collection; Advanced Structured Materials; 161)
2021
Begutachteter Zeitschriftenartikel
Closed-form quaternion representations for rigid body rotation - application to error assessment in orientation algorithms of strapdown inertial navigation systems
In: Continuum mechanics and thermodynamics - analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, Bd. 33 (2021), 4, S. 1141-1160
Experimental analysis and constitutive modeling of anisotropic creep damage in a wrought age-hardenable Al alloy
In: Engineering fracture mechanics - Kidlington: Elsevier Science . - 2021
Inelastic behavior of polyoxymethylene for wide strain rate and temperature ranges - constitutive modeling and identification
In: Materials - Basel: MDPI, Bd. 14 (2021), 13, insges. 17 S.
Temperature resistance of Mo3Si - phase stability, microhardness, and creep properties
In: Metals - Basel: MDPI, Bd. 11 (2021), 4, insges. 17 S.
Buchbeitrag
Dynamics of curved laminated glass composite panels under impact loading
In: Nonlinear Mechanics of Complex Structures - From Theory to Engineering Applications - Cham: Springer International Publishing; Altenbach, Holm . - 2021, S. 91-101 - ( Advanced structured materials; volume 157)
2020
Begutachteter Zeitschriftenartikel
A direct approach to evaluate interaction forces between self-adhesive polymeric films subjected to T-peeling
In: Archive of applied mechanics - Berlin: Springer, Bd. 91 (2021), S. 629-641
Stress-regime-dependence of inelastic anisotropy in forged age-hardening aluminium alloys at elevated temperature - constitutive modeling, identification and validation
In: Mechanics of materials: forum for theoretical, experimental and field advances in mechanics of flow, fracture and general constitutive behavior of geophysical, geotechnical and technological materials - Amsterdam: Elsevier, Volume 141(2020), Article 103262
Buchbeitrag
Analysis of a power plant rotor made of tempered martensitic steel based on a composite model of inelastic deformation
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 1-34 - (Advanced structured materials; 117)
Cohesive zone models-theory, numerics and usage in high-temperature applications to describe cracking and delamination
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2019, S. 131-168, 2020 - (Advanced structured materials; 117)
Heat transfer analysis in the strapdown inertial unit of the navigation system
In: Plasticity, damage and fracture in advanced materials - Cham: Springer, 2020; Altenbach, Holm . - 2020, S. 119-133
Laminated plates with non-linear visco-elastic interlayer - the governing equations
In: Analysis of shells, plates, and beams - Cham: Springer; Altenbach, Holm . - 2020, S. 297-310 - (Advanced structured materials; volume 134)
Structural analysis of gas turbine blades made of Mo-Si-B under stationary thermo-mechanical loads
In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 79-91 - (Advanced structured materials; 117)
2019
Begutachteter Zeitschriftenartikel
A generalized framework towards structural mechanics of three-layered composite structures
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39 (2019), 2, S. 202-219
Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 216.2019, S. 222-227
Numerical analysis of a steam turbine rotor subjected to thermo-mechanical cyclic loads
In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39.2019, 3, S. 261-281
On thermal strains and residual stresses in the linear theory of antisandwiches
In: ZAMM - Berlin: Wiley-VCH, Volume 99, issue 8 (2019), Article e2019000062, insgesamt 17 Seiten
Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads
In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 165 (2019), S. 129-136
The potential of mechanical alloying to improve the strength and ductility of Mo-9Si-8B-1Zr alloys - experiments and simulation
In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Vol. 113 (2019), Artikel 106558
The problems of transient heat transfer of electroconductive bodies in the electromagnetic field
In: Visnyk Nacionalʹnoho techničnoho universytetu \"ChPI\" - Charkiv: NTU \"ChPI\", 2001, Bd. 1.2019, 2, S. 9-13, 2020
Thermomechanical analysis of a steam turbine rotor
In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.]: Wiley-VCH, Volume 19, issue 1 (2019), article e201900361
Buchbeitrag
A damage mechanics based cohesive zone model with damage gradient extension for creep-fatigue-interaction
In: Key engineering materials: KEM - Uetikon a.S.: Trans Tech Publications, 1986, Bd. 794.2019, S. 253-259
Subclasses of mechanical problems arising from the direct approach for homogeneous Plates
In: Recent developments in the theory of shells - Springer International Publishing, S. 43-63, 2019 - (Advanced Structured Materials; 110)
Herausgeberschaft
Advances in mechanics of high-temperature materials
In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 117)
Wissenschaftliche Monographie
Modeling High Temperature Materials Behavior for Structural Analysis. Part 2: Solution procedures and structural analysis examples
In: Cham: Springer, 2019, 1 Online-Ressource, Illustrationen - (Advanced structured materials; 112)
2018
Begutachteter Zeitschriftenartikel
Adaption of a Carreau fluid law formulation for residual stress determination in rotary friction welds
In: Journal of materials processing technology - Amsterdam [u.a.]: Elsevier, Bd. 252.2018, S. 567-572
Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests
In: The journal of strain analysis for engineering design- London: Sage Publ, 1965, Bd. 53.2018, 4, S. 255-265
Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 1965, Bd. 53.2018, 3, S. 156-177
Mechanical models and finite-element approaches for the structural analysis of photovoltaic composite structures - a comparative study
In: Mechanics of composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1965 . - 2018
Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels
In: Acta mechanica - Wien: Springer, 1965, Bd. 229.2018, 7, S. 3051-3068
Two-time-scales and time-averaging approaches for the analysis of cyclic creep based on ArmstrongFrederick type constitutive model
In: Proceedings of the Institution of Mechanical Engineers / C/ Institution of Mechanical Engineers - London: Sage Publ., 1983 . - 2018
Verformungsanalyse elektrisch leitender metallischer Bauteile bei Magnetimpulsbearbeitung
In: Forschung im Ingenieurwesen - research journal: research journal - Berlin: Springer, 1930 . - 2018
Buchbeitrag
Angular velocities, twirls, spins and rotation tensors in the continuum mechanics revisited
In: Generalized Models and Non-classical Approaches in Complex Materials 1 - Cham: Springer International Publishing, 2018 . - 2018, S. 621-632 - (Advanced Structured Materials; 89)
Dissertation
Modeling inelastic behaviour of Al-rich Ti-Al alloys at ultra-high homologous temperature
In: Barleben: docupoint Verlag, 2018, 153 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 30)
Herausgeberschaft
Advances in mechanics of materials and structural analysis - in honor of Reinhold Kienzler
In: [s.l.]: Springer-Verlag, 2018, 1. Aufl., 1 Online-Ressource (PDF, 19415 KB, 461 S.)
2017
Abstract
Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system
In: Intermetallics 2017 - Bad Staffelstein: Educational Center Kloster Banz, 2017, S. 115-116 ; [Konferenz: Intermetallics 2017]
Begutachteter Zeitschriftenartikel
A homogeneous substitute material for the core layer of photovoltaic composite structures
In: Composites / B - Amsterdam [u.a.]: Elsevier, 1996, Bd. 112.2017, S. 353-372
A layer-wise theory of shallow shells with thin soft core for laminated glass and photovoltaic applications
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 178.2017, S. 434-446
Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 2017
Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, 2017
Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
In: Archive of applied mechanics - Berlin: Springer, insges. 17 S., 2017
Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading
In: Composites communications - Amsterdam: Elsevier, Bd. 5.2017, S. 23-26
Mechanical behaviour of photovoltaic composite structures - influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations
In: Composites communications - Amsterdam: Elsevier, Bd. 6.2017, S. 59-62
Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 700.2017, S. 503-511
Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
In: Mechanics of advanced materials and modern processes - Berlin: Springer, 2015, Bd. 3.2017, insges. 20 S.
Buchbeitrag
Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures
In: Mechanics for materials and technologies - Cham, Switzerland: Springer International Publishing, S. 73-122, 2017 - (Advanced structured materials; Volume 46)
Fracture mechanics characterisation of peelfilms
In: Deformation and fracture behaviour of polymer materials - Cham: Springer-Verlag, S. 271-281, 2017 - (Springer series in material science; 247)
Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg: Universitätsbibliothek, 2017, S. 185-192
On the models of three-layered plates and shells with thin soft core
In: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials - Singapore: Springer, S. 159-171, 2017 - (Advanced Structured Materials; 59)
Prediction of stress relaxation in power plant components based on a constitutive model
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines - New York, N.Y: American Society of Mechanical Engineers, 2017, Paper No. GT2017-63608, S. V008T29A017, insgesamt 8 S.
Rezension
[Rezension von: Bobaru, Florin, Handbook of Peridynamic Modeling]
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 97.2017, 5, S. 616
2016
Begutachteter Zeitschriftenartikel
A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 158.2016, S. 340-358
Analysis of anisotropic damage in forged Al-Cu-Mg-Si alloy based on creep tests, micrographs of fractured specimen and digital image correlations
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 652.2016, S. 175-185
Identifying tractionseparation behavior of self-adhesive polymeric films from in situ digital images under T-peeling
In: Journal of the mechanics and physics of solids - Amsterdam [u.a.]: Elsevier Science, Bd. 91.2016, S. 40-55
On the choice of the power law flow rule and its consequences in crystal plasticity
In: Key engineering materials - Aedermannsdorf: Trans Tech Publ, Bd. 725.2016, S. 359-365
Herausgeberschaft
Advanced Methods of Continuum Mechanics for Materials and Structures
In: Singapore: Springer Singapore, 2016, 1 Online-Ressource (555 p) - (Advanced Structured Materials; 60)
Lehrbuch
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
In: Heidelberg: Springer Vieweg, 2016, 2. Auflage, 1 Online-Ressource (XIX, 531 Seiten), 167 Illustrationen
Nicht begutachteter Zeitschriftenartikel
Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen
In: Rundbrief// Gesellschaft für Angewandte Mathematik und Mechanik, GAMM - Dresden: GAMM, 2, S. 4-10, 2016
Wissenschaftliche Monographie
Modeling high temperature materials behavior for structural analysis. Part I: continuum mechanics foundations and constitutive models
In: Springer International Publishing, 2016, 1 Online-Ressource (XIII, 371 Seiten), Illustrationen - (Advanced structured materials; 28)
2015
Begutachteter Zeitschriftenartikel
A relationship between effective work of adhesion and peel force for thin hyperelastic films undergoing large deformation
In: Mechanics research communications - Amsterdam [u.a.]: Elsevier, Bd. 69.2015, S. 24-26
A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 133.2015, S. 265-277
Analysis of casting materials under thermal fatigue
In: Applied mechanics and materials: AMM - [S.l.]: Scientific.Net, Bd. 784.2015, S. 95-103
Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, 2015
Experimental identification of flow properties of a S355 structural steel for hot deformation processes
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ, Bd. 50.2015, 2, S. 75-83
Inelastic deformation of conductive bodies in electromagnetic fields
In: Continuum mechanics and thermodynamics - analysis of complex materials and judicious evaluation of the environment: analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, insges. 13 S., 2015
Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science; Vol. 96.2015, Part A, S. 178-184
On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 95.2015, 10, S. 1004-1011
Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band
In: Mechanics of composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1965, Bd. 51.2015, 2, S. 139-156
Buchbeitrag
Analysis of inelastic behavior for high temperature materials and structures
In: From creep damage mechanics to homogenization methods - a liber amicorum to celebrate the birthday of Nobutada Ohno: a liber amicorum to celebrate the birthday of Nobutada Ohno - a liber amicorum to celebrate the birthday of Nobutada Ohno, S. 241-298, 2015 - (Advanced structured materials; 64)
Approximate rules for calculation of notch stresses considering plasticity and creep
In: Plastic behavior of conventional and advanced materials: theory, experiment, and modeling: proceedings of Plasticity\'15: the twenty first International Symposium on Plasticity and its Current Applications / editor: Akhtar S. Khan: proceedings of Plasticity\'15: the twenty first International Symposium on Plasticity and its Current Applications/ International Symposium on Plasticity and its Current Applications - Fulton, Maryland, USA: NEAT Press, S. 124-126, 2015 ; Kongress: PLASTICITY\' 15 21 (Montego Bay, Jamaica : 2015.01.04-09)
Creep behavior modeling of polyoxymethylene (POM) applying rheological models
In: Inelastic behavior of materials and structures under monotonic and cyclic loading - Heidelberg [u.a.]: Springer, S. 1-5, 2015 - (Advanced structured materials; 57)
Dissertation
Statistical analysis of stress and deformation state in polycrystalline aggregates with a large number of grains
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015, VII, 117 S., Ill., graph. Darst.
2014
Begutachteter Zeitschriftenartikel
A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428
A layer-wise theory for laminated glass and photovoltaic panels
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 112.2014, S. 283-291
A phase mixture model for anisotropic creep of forged AlCuMgSi alloy
In: Materials science and engineering / A. - Amsterdam : Elsevier, Bd. 618.2014, S. 368-376
Homogenisation approach in analysis of creep behaviour in multipass weld
In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53
Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff
In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67
Buchbeitrag
Constitutive models for creep-damage behavior at quasi-static and cyclic loading
In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity \'14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69 ; Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08
2013
Abstract
A material model for describing the anomalous ratcheting effect of advanced chromium steels
In: CanCNSM 2013. - Montréal, insges. 2 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Analysis of laminates for photovoltaic appliacations
In: 8th German-Greek-Polish Symposium on recent advances in mechanics. - Univ. of Bremen, S. 59-60, 2013 ; Kongress: German-Greek-Polish Symposium on recent advances mechanics; 8 (Goslar) : 2013.09.09-13
Artikel in Kongressband
A holistic approach on the simulation of rotary-friction-welding
In: The 7th Asia-Pacific International IIW Congress. - Singapore, insges. 6 S., 2013 ; Kongress: Asia-Pacific International IIW Congress on Recent Development in Welding and Joining Technologies; 7 (Singapore) : 2013.07.08-10[vollständiger Beitrag auf CD-ROM]
A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers
In: CanCNSM 2013. - Montréal, insges. 6 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Surface layer effects in polycrystalline structures under cyclic viscoplasticity
In: CanCNSM 2013. - Montréal, insges. 6 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Begutachteter Zeitschriftenartikel
A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model
In: Computer methods in applied mechanics and engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 265.2013, S. 186-194
Micro-macro analysis of creep and damage behavior of multi-pass welds
In: Problemy mašinostroenija. - Kiev : Izd. \"Naukova Dumka\", Bd. 16.2013, 1, S. 31-38
Modeling creep damage of an aluminumsilicon eutectic alloy
In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, Bd. 22.2013, 5, S. 683-698
Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80
Unsymmetric three-layer laminate with soft core for photovoltaic modules
In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339
Buchbeitrag
Ein robuster Ansatz zur Simulation des kontinuierlich angetriebenen Rotationsreibschweißprozesses
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 9 S., 2013 ; Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26
Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich
In: Effizienz, Präzision, Qualität - 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU: 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU - Magdeburg: Univ., 2013, Paper B2-5, insgesamt 10 S. ; Kongress: Magdeburger Maschinenbau-Tage 11 (Magdeburg : 2013.09.25-26)
Robust methods for creep fatigue analysis of power plant components under cyclic transient thermal loading
In: Proceedings of the ASME Turbo Expo 2013, Volume 5B: Oil and gas applications; steam turbines . - New York, N.Y : ASME, insges. 8 S.
2012
Buchbeitrag
Creep deformation characteristics of Al-rich Ti-Al alloys
In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012 . - 2012, insges. 4 S. ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)
Creep fatigue analysis of power plant components under transient thermal loading
In: Creep and fracture of engineering materials and structures. - the Japan Inst. of Metals, insges. 4 S., 2012 ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11); 12 (Kyoto, Japan) : 2012.05.27-31
Modeling creep ratcheting of an aluminum-silicon eutectic alloy
In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S. ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31
Originalartikel in begutachteter internationaler Zeitschrift
Analysis of laminated glass beams for photovoltaic applications
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036
2011
Originalartikel in begutachteter internationaler Zeitschrift
A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature
In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597
Conservation laws and prediction methods for stress concentration fields
In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355
Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature
In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208
Multi-axial thermo-mechanical analysis of power plant components from 9-12% Cr steels at high temperature
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Multi-axial thermo-mechanical analysis of power plant components from 912% Cr steels at high temperature
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Multi-axial thermo-mechanical analysis of power plant components from 9–12% Cr steels at high temperature
In: Engineering Fracture Mechanics
Originalartikel in begutachteter zeitschriftenartiger Reihe
A variationally consistent derivation of microcontinuum theories
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)
Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)
2010
Konferenz/Aufsatz
Modelling of low cycle fatigue for an aluminum alloy at elevated temperature
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 22-24, 2010
Stress range dependent creep and damage - experimentel observations and their phenomenological description
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 55-57, 2010
2009
Artikel in Zeitschrift
Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 45.2009, 3, S. 249-256
Creep analysis of power plant components from 1% CRMOV and 10% CRMOV steels
In: OMMI. - Leatherhead, Surrey : European Technology Development, Bd. 6.2009, 2, S. 1-10
Creep analysis with a stress range dependent constitutive model
In: Archive of applied mechanics. - Berlin : Springer, Bd. 79.2009, S. 619-630
Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 10, S. 823-832
Structural analysis of a power plant component using a stress-range-dependent creep-damage constitutive model
In: Materials science & engineering. - Amsterdam [u.a.] : ElsevierMaterials science and engineering / A, Bd. 510/511.2009, S. 169-174
Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 45.2009, 3, S. 367-378
Konferenz/Aufsatz
Creep analysis for a wide stress range based on stress relaxation experiments
In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008. - Singapore [u.a.] : World Scientific, S. 41-46, 2009
Modeling of stress range dependent creep and damage for the structural analysis
In: Creep & fracture in high temperature components. - Lancaster, Pa. : DEStech Publ., S. 974-984, 2009
2008
Artikel in Zeitschrift
Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 72.2008, S. 183-191
Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges
In: Acta mechanica. - Wien : Springer, Bd. 195.2008, S. 263-274
Konferenz/Aufsatz
Numerische Zeitstandanalyse einer Kraftwerkskomponente mit einem Kriechschädigungs-Werkstoffmodell
In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. - Düsseldorf : VDEh, S. 37-46, 2008
Monografiebeitrag
Fiber rotation motion in homogeneous flows
In: Micro-macro-interactions. - Berlin [u.a.] : Springer, S. 133-142, 2008
2007
Artikel in Zeitschrift
Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 87.2007, 2, S. 81-93
Numerical benchmarks for creep-damage modeling
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH, Bd. 7.2007, S. 4040021-4040022, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/121371335/PDFSTART
Monografie
Modeling of creep for structural analysis - with 5 tables
In: Berlin [u.a.]: Springer, 2007. - XII, 220 S.: zahlr. graph. Darst. - (Foundations of engineering mechanics) ; Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications
Monografiebeitrag
Long term creep analysis of pipe bends in a steam transfer line at elevated temperature
In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2. - Stafa-Zürich [u.a.] : Trans Tech Publ., 2007, S. 795-802
2006
Artikel in Zeitschrift
A note on transversely-isotropic invariants
In: Zeitschrift für angewandte Mathematik und Mechanik . - Weinheim : Wiley-VCH, Bd. 86.2006, 2, S. 162-168
Ausrichtung von Partikeln in stationären Strömungsfeldern
In: Proceedings in applied mathematics and mechanics . - Weinheim [u.a.] : Wiley-VCH, Bd. 6.2006, S. 423-424, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/114078368/PDFSTART!
Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen
In: Zeitschrift Kunststofftechnik . - München : Hanser, Bd. 2.2006, 6, S. 1-21, unter URL: http://www.kunststoffe.de/directlink.asp?WAK060603
On the free particle rotation in a polymer melt
In: Strojnícky casopis . - Bratislava, Bd. 57.2006, 2, S. 112-126
Steady-state creep analysis of pressurized pipe weldments by perturbation method
In: International journal of solids and structures . - New York, NY [u.a.] : Elsevier, Bd. 43.2006, S. 6908-6920
Habilitation
Modeling of high-temperature creep for structural analysis applications
In: Halle, Univ., FB Ingenieurwiss., Habil.-Schr., 2006, unter URL: http://sundoc.bibliothek.uni-halle.de/habil-online/06/06H055/index.htm
Konferenz/Aufsatz
Creep modeling and long term structural analysis of plates and shells
In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity & viscoplasticity, and metal forming ; proceedings of Plasticity \'06, the Twelfth International Symposium on Plasticity and its Current Applications . - Fulton, Md. : NEAT Press, ISBN 0-9659463-6-3, 2006, S. 580-582
Power plant component design using creep-damage analysis
In: Proceedings of 2006 ASME International Mechanical Engineering Congress & Exposition . - New York : ASME, ISBN 0-7918-3790-4, S. 1-10
2005
Artikel in Zeitschrift
A phenomenological model for anisotropic creep in a multipass weld metal
In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819
Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva
In: Vestnik Nacional\'nogo Techniceskogo Universiteta \"ChPI\". - Char\'kov : Univ., 2005, S. 57-66
Numerical treatment of finite rotation for a cylindrical particle
In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161
On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics
In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339
Konferenz/Aufsatz
Modelling of anisotropic creep in a multi-pass weld metal
In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387
Monografiebeitrag
A direct approach to the formulation of constitutive equations for rods and shells
In: Shell structures. - London [u.a.] : Taylor & Francis, 2005, S. 87-90
2004
Artikel in Zeitschrift
Edge effects in moderately thick plates under creep damage conditions
In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263
Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228
Konferenz/Aufsatz
Boundary layer in a moderately thick plates under creep-damage conditions
In: Proceedings of the 2004 International Conference on Computational & Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116
Shell and solid type finite element analysis of creep in thin-walled structures
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176
2003
Artikel in Zeitschrift
A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions
In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570
Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics
In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352
Konferenz/Aufsatz
A micro-polar theory for binary media with application to flow of fiber suspensions
In: Proceedings of the XXX Summer School \"Advanced Problems in Mechanics\", APM \'2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62
On the predictions of fiber orientation and elastic properties of injection molded-walled parts
In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21
- Siemens Energy Sector (Mülheim)
- Komptenzbereich Hochtemperaturwerkstoffe, Institut für Werkstoffkunde, TU Darmstadt
- Fraunhofer-Center für Silizium-Photovoltaik CSP Halle
- BorgWarner Turbo Systems GmbH Kirchheimbolanden
- Polifilm GmbH Weißandt-Gölzau
- Dipartimento di Meccanica, Politecnico di Milano, Italien
- Department for Dynamics and Strength of Machines, State Polytechnical University Kharkiv, Ukraine
- Fraunhofer-Institut für Mikrostruktur von Werkstoffen und Systemen IMWS Halle
- AAM Germany GmbH, Bad Homburg
- THK RHYTHM AUTOMOTIVE GmbH Fichtenstraße 37 D-40233 Düsseldorf
- Forschungszentrum Jülich, Prof. Dr.-Ing. Manja Krüger
- Hochschule Magdeburg-Stendal, Prof. Dr.-Ing. Christian-Toralf Weber
- Folienwerk Wolfen GmbH
- Fraunhofer IMWS, Halle
- Vereinheitliche Ansätze für das Inelastische Werkstoffverhalten: Plastizität, Kriechen, Relaxation, Erholung, (zyklische) Verfestigung/Entfestigung
- Kriechschädigung, Ermüdungsschädigung, Kriechermüdung, Betriefsfestigkeit
- FEM, benutzerdefinierte Subroutinen für das Materialverhalten
- Bruchmechanik
- Peridynamik
- Beschreibung und Identifikation des inelastischen Werkstoffverhaltens
- Simulation des Bauteilenverhaltens im inelastischen Bereich
- Rissinitiierung, Rissfortschritt, Rissverzweigung und Rissmuster (Simulation mit Peridynamik)
1983-1989 | Academic Education: Speciality Dynamics and strength of maschines, PU Charkiw, Ukraine. Diplom Feb. 1989 |
1993-1996 | Doktorand, Graduate school "Modellierung, Berechnung und Identifikation Mechanischer Systeme" at Otto-von-Guericke-University Magdeburg |
1996 | PhD defence (Dr.-Ing.) at Otto-von-Guericke-University Magdeburg |
1996 - 2011 | Research Fellow, Chair Engineering Mechanics, Martin-Luther-University Halle-Wittenberg |
2006 | Habiltiation at Martin-Luther-University Halle-Wittenberg Halle-Wittenberg |
2007-2011 | Lecturer at Otto-von-Guericke-University Magdeburg, |
2011 | Professorship (apl. Professor) at Martin-Luther-University Halle-Wittenberg Halle-Wittenberg, |
since 2011 | Research Fellow, Institut of Mechanics, Otto-von-Guericke-University Magdeburg, |
since 2012 | Professorship (apl. Professor) at Otto-von-Guericke-University Magdeburg, |
2013-2014 | Professorship, Dipartimento di Meccanica, Politecnico di Milano (Italy) |
since 2014 | visiting Professor, Dipartimento di Meccanica, Politecnico di Milano (Italy) |
2010-2019 | Board Member of DFG Graduate School 1554 Micro-Macro Interactions in Structured Media and Particle Systems |
Reviewer activities
- Reviewer of German Research Foundation (DFG), Agence nationale de la recherche (ANR), France and National Science Centre (NSC), Poland
- Reviewer in more than 40 scientific journals related to mechanics and materials science.
Organized sessions (last 5 years)