Assessment of the solidification cracking susceptibility of welding consumables in the varestraint test by means of an extended evaluation methodology
In: Advanced engineering materials - Weinheim: Wiley-VCH Verl. . - 2022, insges. 9 S.

Characterization of hydrogen diffusion in offshore steel S420G2+M multi-layer submerged arc welded joint
In: Journal of materials engineering and performance - New York, NY: Springer . - 2022, insges. 13 S.

Influence of heat control on properties and residual stresses of additive-welded high-strength steel components
In: Metals - Basel: MDPI, Bd. 12 (2022), 6, insges. 10 S.

Quantitative analysis of hydrogen-assisted microcracking in duplex stainless steel through X-ray refraction 3D imaging
In: Advanced engineering materials - Weinheim: Wiley-VCH Verl. . - 2022, insges. 10 S.

Spatially resolved EDS, XRF and LIBS measurements of the chemical composition of duplex stainless steel welds - a comparison of methods
In: Spectrochimica acta / B - Amsterdam [u.a.]: Elsevier, Bd. 193 (2022)

Triaxial residual stress in laser powder bed fused 316L - effects ofinterlayer time and scanning velocity
In: Advanced engineering materials - Weinheim: Wiley-VCH Verl. . - 2022, insges. 13 S.

Diffraction-based residual stress characterization in laser additive manufacturing of metals
In: Metals - Basel: MDPI, Bd. 11 (2021), 11, insges. 34 S.

Hydrogen-assisted cracking in GMA welding of high-strength structural steel - a new look into this issue at narrow groove
In: Metals - Basel: MDPI, Bd. 11 (2021), 6, insges. 18 S.

Influence of welding stresses on relief cracking during heat treatment of a creep-resistant 13CrMoV steel Part III: assessment of residual stresses from small-scale to real component welds
In: Welding in the world - Berlin: Springer, Bd. 65 (2021), 9, S. 1671-1685

Process-related influences and correlations in wire arc additive manufacturing of high-strength steels
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Bd. 1147 (2021), insges. 12 S.

Surface finishing of hard-to-machine cladding alloys for highly stressed components
In: The international journal of advanced manufacturing technology - London: Springer, Bd. 114 (2021), 5/6, S. 1427-1442

Towards the optimization of post-laser powder bed fusion stress-relieve treatments of stainless steel 316L
In: Metallurgical and materials transactions / A - Boston: Springer, Bd. 52 (2021), 12, S. 5342-5356

Diffusionsmessungen in UP-Mehrlagenschweißgut als effektives Tool gegen verzögerte Kaltrissbildung in Dickblechschweißungen
In: DVS Congress 2021 - Düsseldorf: DVS Media GmbH . - 2021, S. 448-459 - (DVS Berichte; Band 371)

Fügetechnik in Wasserstofftechnologien - Forschungsbedarf für die Branche
In: DVS Congress 2021 - Düsseldorf: DVS Media GmbH . - 2021, S. 612-624 - (DVS Berichte; Band 371)

Wasserstoffunterstützte Kaltrissbildung in Schweißnähten hochfester Stahlgüten - Anforderungen an die Prüfung
In: Werkstoffe und Bauteile auf dem Prüfstand - Düsseldorf: Stahlinstitut VDEh; Brockmann, Stefanie . - 2021, S. 15-20

Real-time radiography for observation of crack growth during welding
In: Magdeburg, 2021, xi, 112 Blätter, Illustrationen, Diagramme, 30 cm

DVS Studie Fügetechnik für die neue Wasserstoffökonomie - - Werkstoffe, Schweißtechnologien, Perspektiven - : Studie im Auftrag der Forschungsvereinigung Schweißen und verwandte Verfahren e. V. des DVS
In: Düsseldorf: DVS Media GmbH, 2021, Printed as manuscript., IV, 59 Seiten, Illustrationen - (DVS Berichte; Band 373)

Hydrogen-assisted cracking in GMA welding of high-strength structural steels using the modified spray arc process
In: Welding in the world: the international journal of materials joining - Berlin: Springer . - 2020

Hydrogen-assisted cracking of GMA welded 960 MPa grade high-strength steels
In: International journal of hydrogen energy: official journal of the International Association for Hydrogen Energy - New York, NY [u.a.]: Elsevier . - 2020

Influence of welding stresses on relief cracking during heat treatment of a creep-resistant 13CrMoV steel Part II: mechanisms of stress relief cracking during post weld heat treatment
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 64.2020, 5, S. 819-829

Influence of welding stresses on relief cracking during heat treatment of a creep-resistant 13CrMoV steel. Part I: effect of heat control on welding stresses and stress relief cracking
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 64.2020, 5, S. 807-817

Tungsten inert gas bead-on-plate weld chemical composition analysis by laser-induced breakdown spectroscopy
In: IOP conference series / Materials science and engineering/ Institute of Physics - London [u.a.]: Institute of Physics, Vol. 882 (2020), Paper 012023, insgesamt 8 Seiten

Ermittlung geeigneter Wärmeführungen zur Vermeidung wasserstoffunterstützter Kaltrisse beim Schweißen höherfester Feinkornbaustähle mit modifiziertem Sprühlichtbogen - Schlussbericht zum IGF-Vorhaben Nr. 18596 BR (Berichtszeitraum: 01.01.2015 bis 30.06.2017) der Forschungsvereinigung Deutscher Verband für Schweißen und verwandte Verfahren e.V. ; Forschungsstelle(n): Nr. 1: Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Nr. 2: Institut für Werkstoff- und Fügetechnik (IWF), Otto-von-Guericke-Universität Magdeburg
In: Magdeburg: Universitätsbibliothek Magdeburg, 2019, 1 Online-Ressource (IV, 94 Seiten, 6,55 MB), Illustrationen, Diagramme

Einfluss der Wärmeführung auf die Wasserstoffkonzentration in geschweißten höherfesten Feinkornbaustählen beim Einsatz modifizierter Sprühlichtbogenprozesse
In: Schweissen und Schneiden: Fachzeitschrift für Schweißen und verwandte Verfahren - Düsseldorf: DVS-Media GmbH, Bd. 70.2018, 5, S. 290-197

Hydrogen determination in welded specimens by carrier gas hot extraction - a review on the main parameters and their effects on hydrogen measurement
In: Welding in the world: the international journal of materials joining - Berlin: Springer, 2018

Hydrogen trapping in T24 Cr-Mo-V steel weld joints-microstructure effect vs. experimental influence on activation energy for diffusion
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 62.2018, 2, S. 277-287

Influence of heat control on hydrogen distribution in high-strength multi-layer welds with narrow groove
In: Welding in the world: the international journal of materials joining - Berlin: Springer, 2018

Influence of welding parameters on diffusible hydrogen content in high-strength steel welds using modified spray arc process
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 62.2018, 1, S. 9-18

Hydrogen distribution in multi-layer welds of steel S960QL
In: SteelyHydrogen: 29-31 May 2018, Ghent : [conference proceedings] - Ghent, paper P44 ; [Konferenz: SteelyHydrogen2018, 29-31 May 2018, Ghent]

Kaltrissbildung in Mehrlagenschweißungen - Einflussanalyse von Nahtgeometrie und Wärmeführung beim Einsatz modifizierter Sprühlichtbögen
In: DVS Congress 2018 - Düsseldorf: DVS Media GmbH, S. 73-78 ; [Kongress: DVS Congress 2018, Friedrichshafen, 2018.09.17-18]

Residual stress formation in component related stress relief cracking tests of a welded creep-resistant steel
In: Residual Stresses 2018: European Conference, ECRS-10 - Millersville, PA: Materials Research Forum LLC, S. 185-190 - (Materials research proceedings; volume 6)

Advanced residual stress assessment of plate girders through welding simulation
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 172 (2017), S. 23-30

Measurement and numerical modeling of residual stresses in welded HSLA component-like I-girders
In: Welding in the world - Berlin: Springer, Bd. 61 (2017), 2, S. 223-229

Thermal desorption analysis for hydrogen trapping in microalloyed high-strength steels
In: Welding in the world - Berlin: Springer, Bd. 61 (2017), 4, S. 637-648

Combining sectioning method and x ray diffraction for evaluation of residual stresses in welded high strength steel components
In: Residual stresses 2016 - Millersville, PA, USA: Materials Research Forum LLC, 2017, S. 163-168 ; [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]

Influence of heat control on residual stresses in low transformation temperature (LTT) large scale welds
In: Residual stresses 2016 - Millersville, PA, USA: Materials Research Forum LLC, 2017, S. 223-228 ; [Kongress: 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016]

Influence of weld repair by gouging on the residual stresses in high strength steels
In: Residual stresses 2016: ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 - Millersville, PA, USA: Materials Research Forum LLC, S. 169-174, 2017

Residual stress influence on the flexural buckling of welded I-girders
In: Residual stresses 2016: ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 - Millersville, PA, USA: Materials Research Forum LLC, S. 109-114, 2017

Adaptierte Wärmeführung zur Optimierung schweißbedingter Beanspruchungen und Eigenschaften höherfester Verbindungen
In: Aachen, Shaker Verlag, 2017, xxv, 239 Seiten, 64 Illustrationen, Diagramme, 21 cm, 395 g - (Berichte aus der Werkstofftechnik), ISBN 978-3-8440-5406-4 ; [Literaturverzeichnis: Seite 199-213]

Gefüge und Eigenspannungen beim Reparatur-Schweißen von höherfesten Feinkornbaustählen
In: Aachen: Shaker Verlag, 2017, 1. Auflage, VIII, 312 Seiten, 292 Illustrationen, Diagramme, 21 cm, 480 g - (Schriftenreihe Fügetechnik Magdeburg; 2017,1)

Effect of hydrogen on mechanical properties of heat affected zone of a reactor pressure vessel steel grade
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 60.2016, 4, S. 623-638

HAZ softening in Nb-, Ti- and Ti + V-bearing quenched and tempered steel welds
In: Welding in the World, 2016, S. 177-184, ISSN 0043-2288, 10.1007/s40194-016-0299-7

Hydrogen degradation effects on mechanical properties in T24 weld microstructures
In: Welding in the world - Berlin: Springer, Bd. 60 (2016), 2, S. 201-216

In-situ load analysis in multi-run welding using LTT filler materials
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 60.2016, 6, S. 1159-1168

Real-time radiography for observation of crack growth during GTA welding
In: Welding in the World, 2016, S. , ISSN 0043-2288, 10.1007/s40194-016-0351-7

Stress build-up in HSLA steel welds due to material behaviour
In: Journal of Materials Processing Technology, 2016, S. 49-58, ISSN 09240136, 10.1016/j.jmatprotec.2015.08.003

Hydrogen diffusion and effect on degradation in welded microstructures of creep-resistant low-alloyed steels
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), 2016, XVII, 302 Seiten, Illustrationen, Diagramme, 24 cm - (BAM-Dissertationsreihe; Band 148)

Microstructure-property relationship in microalloyed high-strength steel welds
In: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), 2017, xiii, 169 Seiten, Illustrationen, Diagramme, 24 cm - (BAM-Dissertationsreihe; Band 155)

Influence oft he thermal cycle on residual stress evolution and cold cracking restistance in welded high-strength steel constructions
In: Proceedings of 2nd ESTAD European Steel Technology and Application Days, Duesseldorf, 15.6.-19.6.2015

The Influence of local weld deformation on hot cracking susceptibility
In: Mathematical Modelling of Weld Phenomena 6, Seggau, 2002, S.803-818

Effect of cooling rate on microstructure and properties of microalloyed HSLA steel weld metals
In: Science and technology of welding and joining: a publication of the Institute of Materials - London: Inst, Bd. 20.2015, 5, S. 371-377

Improving welding stresses by filler metal and heat control selection in component-related butt joints of high-strength steel
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 59.2015, 3, S. 455-464

Measuring Hydrogen Distributions in Iron and Steel Using Neutrons
In: Physics Procedia, 2015, S. 445-450, ISSN 18753892, 10.1016/j.phpro.2015.07.062

Properties and weldability of modified low transformation temperature filler wires
In: Welding in the world: the international journal of materials joining - Berlin: Springer, Bd. 59.2015, 3, S. 413-425

Residual stresses in repair welds of high-strength low-alloy steels
In: Welding in the World, 2015, S. 757-765, ISSN 0043-2288, 10.1007/s40194-015-0257-9

Beitrag zur Ermittlung vorrangig konstruktiver Einflussgrößen auf die Heißrissinitiierung an geschweißten Bauteilen
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), XIII, 169 S., Ill., graph. Darst. - (BAM-Dissertationsreihe; 139)

Zum Einfluss der Wärmeführung auf die Rissbildung beim Spannungsarmglühen dickwandiger Bauteile aus 13CrMoV9-10
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015: Berlin: Bundesanstalt für Materialforschung und -prüfung (BAM), XVIII, 233 S., Ill., zahlr. graph. Darst., 24 cm - (BAM-Dissertationsreihe; 134)

Schweißbedingte Beanspruchungen an hochfesten Bauteilen - Eine Frage der Wärmeführung
In: Der Praktiker, Düsseldorf, 2015, S.470-475

Schweißbedingte Beanspruchungen beim Einsatz modifizierter Sprühlichtbogenprozesse in hochfesten Feinkornbaustählen
In: DVS-Berichte, Düsseldorf, DVS Media GmbH, ISBN 9783-945023-48-4, S. 683-688

Effekt der Wärmeführung auf schweißbedingte Beanspruchungen in Bauteilen aus hochfestem Feinkornbaustahl
In: Schweißen und Schneiden, Band 66, Heft 8, ISSN 0036-7184; Seiten 434-441

Austenite grain growth and microstructure control in simulated heat affected zones of microalloyed HSLA steel
In: Materials science and engineering / A - Amsterdam: Elsevier, Bd. 613.2014, S. 326-335

Challenges when welding components made of higher-strength fine-grained structural steels
In: Welding and cutting: technical journal for welding and allied processes - Düsseldorf: DVS-Verl, Bd. 13.2014, 4, S. 384-392

Correlating welding reaction stresses and weld process conditions for high-strength steel S960QL
In: Welding in the World, Vol. 58, 2014, Issue 3, S. 423-432, ISSN 00432288, 10.1007/s40194-014-0127-x

Effect of martensitic phase transformation on stress build-up during multilayer welding
In: Materials Science Forum, Vol. 768-769, 2014, S. 660-667, ISSN 02555476, 10.4028/www.scientific.net/MSF.768-769.660

Effekt der Wärmeführung auf schweißbedingte Beanspruchungen in Bauteilen aus hochfestem Feinkornbaustahl
In: Schweissen und Schneiden: Fachzeitschrift für Schweißen und verwandte Verfahren - Düsseldorf: DVS-Media GmbH, Bd. 66.2014, 8, S. 434-441

Hot cracking tests - An overview of present technologies and applications
In: Welding in the World, Vol. 58, 2014, Issue 3, S. 397-421, ISSN 00432288, 10.1007/s40194-014-0126-y

Hydrogen interaction with residual stresses in steel studied by synchrotron X-ray diffraction
In: Materials Science Forum, Vol. 772, 2014, S. 91-95, ISSN 02555476, 10.4028/www.scientific.net/MSF.772.91

Imaging of hydrogen in steels using neutrons
In: International journal of materials research: IJMR - München: Hanser, Bd. 105.2014, 7, S. 640-644

Real time monitoring of phase transformation and strain evolution in LTT weld filler material using EDXRD
In: Journal of materials processing technology - Amsterdam [u.a.]: Elsevier, Bd. 214.2014, 11, S. 2739-2747

Residual stress engineering by low transformation temperature alloys-state of the art and recent developments
In: Welding in the world - Berlin: Springer, Bd. 58 (2014), 5, S. 729-741

Residual stress in steel fusion welds joined using low transformation temperature (LTT) filler material
In: Materials Science Forum, Vol. 768-769, 2014, S. 620-627, ISSN 02555476, 10.4028/www.scientific.net/MSF.768-769.620

Stress build-up during multilayer welding with novel martensitic filler materials
In: HTM - Journal of Heat Treatment and Materials, Vol. 69, 2014, Issue 2, S. 80-88, ISSN 21941831, 10.3139/105.110210

Thermal stability of retained austenite in low alloyed TRIP-steel determined by high energy synchrotron radiation
In: Materials Science Forum, Vol. 772, 2014, S. 129-133, ISSN 02555476, 10.4028/www.scientific.net/MSF.772.129

Three-dimensional imaging of hydrogen blister in iron with neutron tomography
In: Acta materialia - Amsterdam [u.a.]: Elsevier Science, Bd. 78.2014, S. 14-22

Approach for calculation of apparent hydrogen diffusion coefficients with permeation experiments in CrMoV steel weld joints
In: SteelyHydrogen2014 conference proceedings: 5-7 May 2014, Ghent - Zelzate: OCAS, S. 669-674 ; Kongress: Steel & Hydrogen (Ghent : 2014.05.05-07)

Herausforderungen beim Schweißen von Bauteilen aus höherfesten Feinkornbaustählen
In: Schweißtechnische Fachtagung. - Magdeburg : Verl. Univ. Magdeburg, insges. 10 S., 2014 ; Kongress: Schweißtechnische Fachtagung; 24 (Magdeburg) : 2014.05.15

In situ observation of stress accumulation during sub-merged arc welding
In: Advanced materials research - Zug: Scitec Publ, Bd. 996.2014, S. 417-423

Influence of heat control on welding stresses in multilayer-component welds of high-strength steel S960QL
In: Advanced materials research - Zug: Scitec Publ, Bd. 996.2014, S. 475-480

Moderne Methoden der Spannungsanalyse an geschweißten Komponenten
In: 15. Sommerkurs Werkstoffe und Fügen : Magdeburg, 12. und 13. September 2014. - Magdeburg : Univ., S. 27-34 ; Kongress: Sommerkurs Werkstoffe und Fügen; 15 (Magdeburg) : 2014.09.12-13

Multiaxiale Belastungsanalyse an dickwandigen Bauteilschweißungen aus 13CrMoV9-10
In: DVS Congress 2014; Band 306; ISBN 978-3-945023-7; S. 42-48

Welding residual stress distribution of quenched and tempered and thermo-mechanically hot rolled high strength steels
In: Advanced materials research - Zug: Scitec Publ, Bd. 996.2014, S. 457-462

Cold cracking tests - An overview of present technologies and applications
In: Welding in the World, Vol. 57, 2013, Issue 1, S. 3-37, ISSN 00432288, 10.1007/s40194-012-0001-7

Hot cracking analysis using in situ digital image correlation technique
In: Welding in the World, Vol. 57, 2013, Issue 3, S. 277-284, ISSN 00432288, 10.1007/s40194-013-0027-5

Multi-axial load analysis of thick-walled component welds made of 13CrMoV9-10
In: Journal of Materials Processing Technology, Vol. 213, 2013, Issue 7, S. 1234-1240, ISSN 09240136, 10.1016/j.jmatprotec.2013.01.008

Multi-axial load analysis of thick-walled component welds made of 13CrMoV9-10
In: Journal of Materials Processing Technology, 2013, S. 1234-1240, ISSN 09240136, 10.1016/j.jmatprotec.2013.01.008

Quantification of hydrogen effective diffusion coefficients and effusion behavior in duplex stainless steel weld metals
In: Welding in the World, Vol. 57, 2013, Issue 4, S. 561-567, ISSN 00432288, 10.1007/s40194-013-0051-5

The advantage of using in-situ methods for studying hydrogen mass transport - neutron radiography vs. carrier gas hot extraction
In: International journal of hydrogen energy. - New York, NY [u.a.] : Elsevier, Bd. 38.2013, 34, S. 14725-14729

Energy dispersive synchrotron diffraction for in-situ analyses of hydrogen behavior in steels
In: Proceedings of The 8th Pacific Rim International Congress on Advanced Materials and Processing: PRICM 8/ Pacific Rim International Conference on Advanced Materials and Processing - Hoboken, New Jersey: Wiley, 2013 . - 2013, S. 3481-3488

Experimental and numerical analysis of local thermomechanical behavior for hot cracking assessment in welds
In: Mathematical modelling of weld phenomena 10: [papers presented at the 10th International Seminar \"Numerical Analysis of Weldability\", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria / Technische Universität Graz. [Organized by the Institute for Materials Science and Welding (IWS) of Graz University of Technology ...] Ed. by C. Sommitsch ...: [papers presented at the 10th International Seminar \"Numerical Analysis of Weldability\", held from September 24 to 26, 2012 at Schloss Seggau near Graz, Austria - Graz: Verl. der Techn. Univ. Graz, 2013 . - 2013, S. 357-370 ; [Kongress: 10. International Seminar \"Numerical Analysis of Weldability\", Schloss Seggau near Graz, 24. - 26.09.2012]

Mikrostruktur- und Härteentwicklung in Schweißnähten mit neuartigen LTT-Schweißzusatzwerkstoffen
In: Fortschritte in der Metallographie: [Vortragstexte der 47. Metallographie-Tagung, 18. - 20. September 2013 in Friedrichshafen] / [Veranstalter: Fachausschuss Materialographie der Deutschen Gesellschaft für Materialkunde e.V.]. Michael Lohrmann ...: [Vortragstexte der 47. Metallographie-Tagung, 18. - 20. September 2013 in Friedrichshafen] - Bonn: Inventum GmbH, 2013 . - 2013 ; [Kongress: 47. Metallographie-Tagung, Friedrichshafen, 18. - 20. September, 2013]

Untersuchungen zum Einfluss der Wärmeführung auf die Eigenspannungsausbildung und Gesamtbeanspruchung in Schweißverbindungen aus hochfestem Feinkornbaustahl
In: DVS Congress 2013: Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren: Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013/ Große Schweißtechnische Tagung - Düsseldorf: DVS Media, 2013 . - 2013 ; [Kongress: DVS Congress 2013: Große Schweißtechnische Tagung, DVS-Studentenkongress, 4. DVS-Forum Schulung und Prüfung ; Vorträge der Veranstaltungen in Essen vom 16. bis 21. September 2013 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren, Essen, 16. - 21. September, 2013]

Fatigue strength improvement of welded structures using new low transformation temperature filler materials
In: Procedia Engineering, Vol. 66, 2013, S. 192-201, ISSN 18777058, 10.1016/j.proeng.2013.12.074

Handbook of Technical Diagnostics
In: 2013, S. , 10.1007/978-3-642-25850-3

Neutron imaging of hydrogen in steels
In: Materials Science and Technology Conference and Exhibition 2013, MS and T 2013, Vol. 2, 2013, S. 945-950

Residual stresses in multi-layer component welds
In: ASM Proceedings of the International Conference: Trends in Welding Research, 2013, S. 48-54

Diffusible hydrogen content depending on welding and cooling parameters
In: Welding in the World, Vol. 56, 2012, Issue 11-12, S. 26-33, ISSN 00432288, 10.1007/BF03321392

In situ synchrotron X-ray radiation analysis of hydrogen behavior in stainless steel subjected to continuous heating
In: Journal of Materials Science, Vol. 47, 2012, Issue 15, S. 5879-5885, ISSN 00222461, 10.1007/s10853-012-6489-9

Mobile computed tomography for inspection of welded pipes
In: The e-journal of nondestructive testing & ultrasonics - Kirchwald: NDT.net . - 2012, 4, insges. 4 S.

Suitability of high-alloyed flux-cored wire electrodes for laser-GMA hybrid welding
In: Welding and Cutting, Vol. 11, 2012, Issue 3, S. 181-187, ISSN 16123433

Assessment of hot cracking behaviour in welds
In: International Journal of Materials Research, Vol. 102, 2011, Issue 8, S. 1001-1006, ISSN 18625282, 10.3139/146.110545

Characterizing phase transformations of different LTT alloys and their effect on residual stresses and cold cracking
In: Welding in the World, Vol. 55, 2011, Issue 3-4, S. 48-56, ISSN 00432288

Effects of heat control on the stress build-up during high-strength steel welding under defined restraint conditions
In: Welding in the World, Vol. 55, 2011, Issue 7-8, S. 58-65, ISSN 00432288

High-energy synchrotron diffraction study of a transformation induced plasticity steel during tensile deformation
In: Journal of Strain Analysis for Engineering Design, Vol. 46, 2011, Issue 7, S. 581-591, ISSN 03093247, 10.1177/0309324711403969

Hydrogen absorption and diffusion in different welded duplex steels
In: Welding in the World, Vol. 55, 2011, Issue 5-6, ISSN 00432288

In situ analysis of hydrogen behaviour in stainless steels by high energy synchrotron radiation
In: Materials Science and Engineering A, Vol. 528, 2011, Issue 3, S. 1608-1614, ISSN 09215093, 10.1016/j.msea.2010.10.090

In situ study of structural integrity of low transformation temperature (LTT)-welds
In: Materials Science and Engineering A, Vol. 528, 2011, Issue 16-17, S. 5566-5575, ISSN 09215093, 10.1016/j.msea.2011.03.091

In-situ analysis of solid state phase transformation in TRIP-aided steels by synchrotron diffraction
In: Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 29, 2011, Issue 3, S. 81s-85s, ISSN 02884771, 10.2207/qjjws.29.81s

Martensite fraction determination using cooling curve analysis
In: Diffusion and Defect Data Pt.B: Solid State Phenomena, Vol. 172-174, 2011, S. 221-226, ISSN 10120394, 10.4028/www.scientific.net/SSP.172-174.221

Neutron radiography study of hydrogen desorption in technical iron
In: Journal of Materials Science, Vol. 46, 2011, Issue 15, S. 5171-5175, ISSN 00222461, 10.1007/s10853-011-5450-7

Residual stresses in multilayer welds with different martensitic transformation temperatures analyzed by high-energy synchrotron diffraction
In: Materials Science Forum, Vol. 681, 2011, S. 37-42, ISSN 02555476, 10.4028/www.scientific.net/MSF.681.37

Study of hydrogen effusion in austenitic stainless steel by time-resolved in-situ measurements using neutron radiography
In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 651, 2011, Issue 1, S. 211-215, ISSN 01689002, 10.1016/j.nima.2011.02.010

Thermo analytic investigation of hydrogen effusion behavior - Sensor evaluation and calibration
In: Steel Research International, Vol. 82, 2011, Issue 1, S. 14-19, ISSN 16113683, 10.1002/srin.201000237

Time-and temperature-resolved synchrotron X-ray diffraction: Observation of phase transformation and strain evolution in novel low temperature transformation weld filler materials
In: Journal of Strain Analysis for Engineering Design, Vol. 46, 2011, Issue 7, S. 563-579, ISSN 03093247, 10.1177/0309324711413190

Welding residual stresses depending on solid-state transformation behaviour studied by numerical and experimental methods
In: Materials Science Forum, Vol. 681, 2011, S. 85-90, ISSN 02555476, 10.4028/www.scientific.net/MSF.681.85

The influence of hydrogen on thermal desorption processes in structural materials
In: Procedia Engineering, Vol. 10, 2011, S. 3668-3676, ISSN 18777058, 10.1016/j.proeng.2011.04.604

Comparative study between hot extraction methods and mercury method - A national round robin test
In: Welding in the World, Vol. 54, 2010, Issue 5-6, S. R108-R114, ISSN 00432288

Effects of shielding with various hydrogen-argon mixtures on supermartensitic stainless steel TIG welds
In: Materialpruefung/Materials Testing, Vol. 52, 2010, Issue 5, S. 306-315, ISSN 00255300

Hydrogen absorption of different welded duplex steels
In: International Journal of Hydrogen Energy, Vol. 35, 2010, Issue 9, S. 4368-4374, ISSN 03603199, 10.1016/j.ijhydene.2010.01.148

In-situ observation of phase transformations during welding of low transformation temperature filler material
In: Materials Science Forum, Vol. 638-642, 2010, S. 3769-3774, ISSN 02555476, 10.4028/www.scientific.net/MSF.638-642.3769

In-situ synchrotron diffraction and digital image correlation technique for characterizations of retained austenite stability in low-alloyed transformation induced plasticity steel
In: Scripta Materialia, Vol. 63, 2010, Issue 12, S. 1149-1152, ISSN 13596462, 10.1016/j.scriptamat.2010.08.007

Measurements of diffusible hydrogen contents at elevated temperatures using different hot extraction techniques - An international round robin test
In: Welding in the World, Vol. 54, 2010, Issue 5-6, S. R115-R122, ISSN 00432288

Suitability of high alloyed wire electrodes for the positional laser-GMA-hybrid welding
In: International Journal of Microstructure and Materials Properties, Vol. 5, 2010, Issue 2-3, S. 245-260, ISSN 17418410, 10.1504/IJMMP.2010.035943

In situ studies of phase transformation and residual stresses in LTT alloys during welding using synchrotron radiation
In: In-situ Studies with Photons, Neutrons and Electrons Scattering, 2010, S. 13-26, 10.1007/978-3-642-14794-4_2

In-situ studies with photons, neutrons and electrons scattering
In: In-situ Studies with Photons, Neutrons and Electrons Scattering, 2010, S. 1-204, 10.1007/978-3-642-14794-4

Determination of residual stresses in Low Transformation Temperature (LTT-) weld metals using X-ray and high energy synchrotron radiation
In: Welding in the World, Vol. 53, 2009, Issue 1-2, S. 3-16, ISSN 00432288

Formation of welding residual stresses in low transformation temperature (LTT) materials [Tensões residuais de soldagem em materias de baixa temperatura de transformação (BTT)]
In: Soldagem e Inspecao, Vol. 14, 2009, Issue 1, S. 74-81, ISSN 01049224

Manufacturing engineering
In: Springer handbook of mechanical engineering - with ... 402 tables: with ... 402 tables - New York: Springer . - 2009, S. 523-773

Restraint conditions and welding residual stresses in self-restrained cold cracking tests
In: ASM Proceedings of the International Conference: Trends in Welding Research, 2009, S. 766-773, 10.1361/cp2008twr766

Aspects of positional laser-GMA-hybrid welding using high alloyed tubular cored wire electrodes
In: Welding in the World, Vol. 52, 2008, Issue SPEC. ISS., S. 479-484, ISSN 00432288

Effects of preheating and interpass temperature on stresses in S 1100 QL multi-pass butt-welds
In: Welding in the World, Vol. 52, 2008, Issue 3-4, S. 79-92, ISSN 00432288

Solid wire vs. flux cored Wire - comparing investigations for GMA-laser-hybrid welding
In: Kongress: International Conference on Design, Fabrication and Economy of Welded Structures, Miskolc, 24.-26.04.2008, Design, fabrication and economy of welded structures - Chichester: Horwood . - 2008, S. 477-484

Determination of critical strain rate for solidification cracking by numerical simulation
In: Hot Cracking Phenomena in Welds II, 2008, S. 77-92

Influence of local weld deformation on the solidification cracking susceptibility of a fully austenitic stainless steel
In: Hot Cracking Phenomena in Welds II, 2008, S. 127-145

Corrosion testing of welds, A review of methods
In: Welding in the World, Vol. 51, 2007, Issue 7-8, S. 79-106, ISSN 00432288

Corrosion testing of welds, a review of methods
In: Rivista Italiana della Saldatura, Vol. 59, 2007, Issue 4, S. 529-552, ISSN 00356794

Design-specific influences on local weld displacement and hot cracking
In: Kongress: II. International Conference in Welding Joining of Materials, ICWJM 2007 - II. Conferencia Internacional de Soldadura y Técnologias de Unión de Materiales, Cusco, Peru, 16-18 Abril 2007, Cusco, Peru, 16.-18.04.2007, ICWJM 2007 - II. Conferencia Internacional de Soldadura y Técnologias de Unión de Materiales, Cusco, Peru, 16-18 Abril 2007 - Fondo Editorial . - 2007, insges. 9 S.

Prüfen Sie noch oder bewerten Sie schon - Entwicklungen in der Untersuchung geschweißter Bauteile
In: Kongress: 10. Internationales Aachener Schweißtechnik-Kolloquium, IAST\'07, Aachen, 24. - 25.10.2007, Schweißtechnik und Fügetechnik - Schlüsseltechnologien der Zukunft - Herzogenrath: Shaker . - 2007, S. 41-57

Effects of the load history on the residual stress distribution in welded components
In: Welding in the World, Vol. 50, 2006, Issue 7-8, S. 11-17, ISSN 00432288

Prüfung der Kalt- und Heißrisssicherheit gefügter Bauteile
In: Jahrbuch Schweisstechnik. - Düsseldorf : DVS Media GmbH, 2006

Vertical-up and -down laser plasma powder hybrid welding of a high nitrogen austenitic stainless steel
In: Welding in the World, Vol. 49, 2005, Issue 5-6, S. 45-49, ISSN 00432288

Beurteilung der Kaltrisssicherheit von Schweißverbindungen in realen Konstruktionen mit der Finite-Elemente-Methode.
In: Deutscher Verband für Schweißtechnik e.V. (Veranst.): Schweißen und Schneiden 2004 : Vorträge der gleichnamigen Großen Schweißtechnischen Tagung in Magdeburg vom 22. bis 24. September 2004. Düsseldorf : DVS-Verl., 2004, S. 195 - 200 (DVS-Berichte 232)

Effect of Filler Material Selection and Shrinkage Restraint on Stress Strain Build Up in Component Welds
In: ASM Proceedings of the International Conference: Trends in Welding Research, 2002, S. 906-911

Effect of weld metal strength and welding conditions on reaction forces and stress distribution of restrained components.
In: Welding in the world : Journal of the International Institute of Welding [Oxford] 45(2001), Nr. 1/2, S. 18 - 26

Incremental hole-drilling method for the determination of residual stresses on welds
In: Welding Research Abroad, Vol. 46, 2000, Issue 3, S. 12-19, ISSN 00432318

Incremental hole-drilling method for the determination of residual stresses on welds
In: Schweissen und Schneiden/Welding and Cutting, Vol. 51, 1999, Issue 8, S. E165-E168, ISSN 00367184

Verformungs- und Spannungsanalyse an Großproben aus Feinkornbaustahl in einer Großprüfanlage
In: Anspruch und Tendenzen in der experimentellen Strukturmechanik : GESA-Symposium 1999 ; Symposium Warnemünde, 6. und 7. Mai 1999. - Düsseldorf : VDI-Verl., S. 215-224 - (VDI-Berichte; 1463) ; [Kongress: GESA-Symposium 1999, Warnemünde, 6. und 7. Mai 1999]