From micro-scale to macro-scale modeling of solute transport in drying capillary porous media
In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Volume 165(2021), part B, article 120722

Superheated steam drying of single wood particles - modeling and comparative study with hot air drying
In: Chemical engineering & technology: industrial chemistry, plant equipment, process engineering, biotechnology - Weinheim: Wiley-VCH Verl.-Ges., Bd. 44.2021, 1, S. 114-123

Insights into evaporation from the surface of capillary porous media gained by discrete pore network simulations
In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Volume 168(2021), article 120877

Non-local equilibrium continuum modeling of partially saturated drying porous media - comparison with pore network simulations
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Volume 228 (2020), article 115957

Steady-state water drainage by oxygen in anodic porous transport layer of electrolyzers - a 2D pore network study
In: Processes: open access journal - Basel: MDPI, Vol. 8 (2020), 3, Artikelnr. 362, insgesamt 17 Seiten

Prediction of particle size and layer-thickness distributions in a continuous horizontal fluidized-bed coating process
In: Particuology - Amsterdam: Elsevier, Vol. 50 (2020), insgesamt 12 Seiten

Influence of process variables on spray agglomeration process in a continuously operated horizontal fluidized bed
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 363.2020, S. 195-206

Characterization of lyophilization of frozen bulky solids
In: Chemical engineering & technology: industrial chemistry, plant equipment, process engineering, biotechnology - Weinheim: Wiley-VCH Verl.-Ges., Bd. 43.2020, 5, S. 789-796

Estimation of the local sublimation front velocities from neutron radiography and tomography of particulate matter
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Vol. 211 (2020), Artikelnr. 115268, insgesamt 11 Seiten

Development of an experimental setup for in situ visualization of lyophilization using neutron radiography and computed tomography
In: Review of scientific instruments: a monthly journal devoted to scientific instruments, apparatus, and techniques - [S.l.]: American Institute of Physics, Vol. 91 (2020), 1, Artikelnr. 014102, insgesamt 6 Seiten

Modeling of inter- and intra-particle coating uniformity in a Wurster fluidized bed by a coupled CFD-DEM-Monte Carlo approach
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Vol. 211 (2020), Artikelnr. 115289, insgesamt 18 Seiten

Modeling of superheated steam drying of wood particles
In: Journal of mechanical engineering research and developments: JMERD - Cyberjaya, Selangor: Zibeline International Publishing, Bd. 43.2020, 1, S. 160-170

The Brooks and Corey capillary pressure model revisited from pore network simulations of capillarity-controlled invasion percolation process
In: Processes: open access journal - Basel: MDPI, Vol. 8 (2020), 10, Artikelnr. 1318, insgesamt 17 Seiten

Ultrathin coating of particles in fluidized bed using submicron droplet aerosol
In: Particuology - Amsterdam: Elsevier . - 2020

Influence of thermal gradients on the invasion patterns during drying of porous media - lattice Boltzmann method
In: Physics of fluids: devoted to the publication of original theoretical, computational, and experimental contributions to the dynamics of gases, liquids, and complex or multiphase fluids - [S.l.]: American Institute of Physics, Volume 32 (2020), 12, Artikel 122116, insgesamt 26 Seiten

Lattice Boltzmann simulations for micro-macro interactions during isothermal drying of bundle of capillaries
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Vol. 220 (2020), Artikelnr. 115634, insgesamt 18 Seiten

Estimation of the dominant size enlargement mechanism in spray fluidized bed processes
In: AIChE journal/ American Institute of Chemical Engineers - Hoboken, NJ: Wiley, Vol. 66 (2020), 5, Artikelnr. e16920, insg. 18 Seiten

A tunable aggregation model incorporated in Monte Carlo simulations of spray fluidized bed agglomeration
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 364.2020, S. 417-428

Influence of operating parameters on process behavior and product quality in continuous spray fluidized bed agglomeration
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 375.2020, S. 210-220

Mass transport in a partially filled horizontal drum - modelling and experiments
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Vol. 214 (2020), Artikelnr. 115448, insgesamt 18 Seiten

Computational optimization of porous structures for electrochemical processes
In: Processes: open access journal - Basel: MDPI, Vol. 8 (2020), 10, Artikelnr. 1205, insgesamt 21 Seiten

Freeze-drying with structured sublimation fronts - visualization with neutron imaging
In: Processes: open access journal - Basel: MDPI, Vol. 8 (2020), 9, Artikelnr. 1091, insgesamt 12 Seiten

Pore network model of evaporation in porous media with continuous and discontinuous corner films
In: Physical review fluids - College Park, MD: APS, 5 (2020), 1, article 014307, insgesamt 21 Seiten

PTV measurement and DEM simulation of the particle motion in a flighted rotating drum
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 363.2020, S. 23-37

Novel technique for coating of fine particles using fluidized bed and aerosol atomizer
In: Processes: open access journal - Basel: MDPI, Volume 8(2020), issue 12, article 1525, 18 Seiten

Capillary instability induced gas-liquid displacement in porous media - experimental observation and pore network model
In: Physical review fluids - College Park, MD: APS, Vol. 5(2020), 10, article 104305, insgesamt 21 Seiten

Dynamics of spray granulation in continuously operated horizontal fluidized beds
In: Dynamic flowsheet simulation of solids processes - Cham: Springer Nature Switzerland AG 2020, 2020; Heinrich, Stefan . - 2020, S. 67-107

Verweilzeitverhalten von partikulären Gütern in kontinuierlich betriebenen Wirbelschichtrinnen am Beispiel von Trocknung und Coating
In: Magdeburg, 2020, XVI, 171 Seiten, Illustrationen, Diagramme, 21 cm ; [Literaturverzeichnis: Seite 157-165]

Modeling and validation of particle drying and coating in a continuously operated horizontal fluidized bed
In: Magdeburg, 2020, xvii, 133 Seiten, Diagramme, 21 cm ; [Literaturverzeichnis: Seite 112-125]

Experimental and simulation studies of mesoscale phenomena in gas-solid fluidized beds PTV and CFD-DEM
In: Magdeburg, 2020, x, 248 Seiten, Illustrationen, Diagramme, 24 cm ; [Literaturverzeichnis: Seite 199-221]

Drying and wetting of capillary porous materials - insights from imaging and physics-based modeling
In: Magdeburg, 2020, xiii, 141 Blätter, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Blatt 128-141]

Reaction engineering approach for modeling single wood particle drying at elevated air temperature
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 199.2019, S. 602-612

A framework and numerical solution of the drying process in porous media by using a continuous model
In: International journal of chemical engineering - New York, NY [u.a.]: Hindawi Publ. Corp, Vol. 2019, Artikel-ID 9043670, insgesamt 16 Seiten

Mechanical behavior of particle aggregates during drying
In: PARTEC 2019 - Nürnberg, 2019; PARTEC$2019 . - 2019, insges. 10 S. ; [Kongress: PARTEC 2019]

Experimental investigation of dynamic process stability of continuous fluidized bed spray agglomeration with internal classification
In: PARTEC 2019 - Nürnberg; PARTEC$2019, insges. 5 S., 1 USB-Stick ; [Kongress: PARTEC 2019]

CFD simulation of particle residence time distribution in industrial scale horizontal fluidized bed
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 345.2019, S. 129-139

Particle dynamics in a multi-staged fluidized bed - particle transport behavior on micro-scale by discrete particle modelling
In: Advanced powder technology - Amsterdam [u.a.]: Elsevier, Bd. 30.2019, 10, S. 2014-2031

Particle-particle heat transfer in thermal DEM - three competing models and a new equation
In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, 1960, Bd. 132.2019, S. 939-943

Continuous modeling of superheated steam drying of single rice grains
In: Drying technology - Philadelphia, Pa.: Taylor & Francis, Bd. 37.2019, 12, S. 1583-1596

Inductive heating of fluidized beds - mobile versus stationary heat exchange elements
In: Drying technology - Philadelphia, Pa: Taylor & Francis, Bd. 37.2019, 5, S. 652-663

Determination of the moisture transport coefficient from pore network simulations of spontaneous imbibition in capillary porous media
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 207.2019, S. 600-610

Design study of printer nozzle spray dryer by computational fluid dynamics modeling
In: Drying technology - Philadelphia, Pa.: Taylor & Francis, Bd. 38.2020, 1/2, S. 211-223

PTV experiments and DEM simulations of the coefficient of restitution for irregular particles impacting on horizontal substrates
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 360.2020, S. 352-365

Experimental benchmarking of diffusion and reduced models for convective drying of single rice grains
In: Drying technology - Philadelphia, Pa.: Taylor & Francis, Bd. 38.2020, 1/2, S. 200-210

A model of pulse combustion drying and breakup of colloidal suspension droplets
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 355.2019, S. 755-769

Stochastic model to simulate spray fluidized bed agglomeration - a morphological approach
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, Bd. 355.2019, S. 449-460

Microwave- and ultrasound-assisted convective drying of raspberries - drying kinetics and microstructural changes
In: Drying technology - Philadelphia, Pa.: Taylor & Francis, Bd. 37.2019, 1, insges. 12 S.

Pore network simulation of gas-liquid distribution in porous transport layers
In: Processes - Basel: MDPI, Volume 7 (2019), 9, Artikel 558, insgesamt 23 Seiten

Numerical study of the hydrodynamics of fluidized beds operated under sub-atmospheric pressure
In: The chemical engineering journal - Amsterdam: Elsevier, Bd. 372.2019, S. 1134-1153

Freeze drying behavior of spray frozen and pelletized materials by neutron radiography and tomography
In: EuroDrying\'2019 - Torino, Paper 035, Seite 180-186 ; [Konferenz: EuroDrying 2019, Torino, 10-12 July 2019]

Optimized economical and technical sector coupling under consideration of defined incentives
In: CIRED 2019 Conference: [25th International Conference on Electricity Distribution, CIRED, Madrid, 3-6 June 2019] - CIRED Repository, 2019, Paper No 566, insgesamt 5 Seiten ; [Kongress: 25th International Conference on Electricity Distribution, Madrid, 3-6 June 2019]

Novel algorithm for Particle Tracking Velocimetry (PTV) of non-spherical particles
In: 9th International Granulation Workshop: Lausanne, Switzerland, June 26-28 (2019) - Lausanne, 2019 . - 2019, insges. 12 S.

The role of discrete capillary rings in mass transfer from the surface of a capillary porous medium during drying
In: EuroDrying\'2019 - Torino, Code 000950009201, Seite 316-323 ; [Konferenz: EuroDrying 2019, Torino, 10-12 July 2019]

Drying of a shrinking porous medium saturated with a solution - a pore network study
In: EuroDrying\'2019 - Torino, Code: 000950009101, Seite 46-53 ; [Konferenz: EuroDrying 2019, Torino, 10-12 July 2019]

Modeling of undesired agglomeration in fluidized bed coating
In: 9th International Granulation Workshop - Lausanne, insges. 16 S., 2019

Experimental investigation of process behavior of continuous fluidized bed spray agglomeration with internal classification
In: 9th International Granulation Workshop - Lausanne, insges. 8 S., 2019

Induktiv beheizte Wirbelschichten und deren Anwendungsmöglichkeiten
In: Magdeburg, 2019, XV, 129 Seiten, Illustrationen, Diagramme, 21 cm ; [Literaturverzeichnis: Seite 113-117]

Microstructure of particles produced by fluidized bed agglomeration of soft materials
In: Barleben: docupoint Verlag, 2019, xix, 136 Seiten, Illustrationen, Diagramme, 21 cm - (docupoint Wissenschaft; Micro-macro transactions; Volume 35) ; [Literaturverzeichnis: Seite 115-122]

Analysis and simulation of the deformation behaviour at quasi-static compressive stressing of bonded model pellets
In: Magdeburg, 2019, xvi, 141 Seiten, 39 ungezählte Seiten, Illustrationen, Diagramme, 21 cm ; [Literaturverzeichnis: Seite 134-141]

Morphologische Chrarakterisierung beschichteter Partikel und feststoffhaltiger Mikrotropfen
In: Magdeburg, 2019, XIII, 193 Seiten, Illustrationen, Diagramme, 24 cm ; [Literaturverzeichnis: Seite 164-170]

Intelligentes Multi-Energie-System (SmartMES) - Statusbericht der Otto-von-Guericke-Universität Magdeburg zum Verbundprojekt : 2. Statusseminar 04. April 2019 in Magdeburg
In: Magdeburg: Otto-von-Guericke-Universität, 2019, VI, 81 Seiten, Diagramme, 21 cm - (Res electricae Magdeburgenses; Band 76) ; Kongress: Projekt SmartMES 2 (Magdeburg : 2019.04.04) ; [Literaturverzeichnis: Seite 78-81]

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process
In: Chemical engineering research and design: CERD - Amsterdam: Elsevier, Bd. 139.2018, S. 104-115

Parameter identification for continuous fluidized bed spray agglomeration
In: Processes: open access journal - Basel: MDPI, Vol. 6.2018, 12, Artikel 246

Impact of operating conditions on a single droplet and spray drying of hydroxypropylated pea starch - process performance and final powder properties
In: Asia-Pacific journal of chemical engineering - Hoboken, NJ: Wiley, Bd. 13.2018, 5

Coating of finely dispersed particles by two-fluid nozzle
In: Particuology: science and technology of particles / Chinese Society of Particuology: science and technology of particles - Amsterdam: Elsevier, 2008, Bd. 38.2018, S. 80-93

Inductive heating of fluidized beds - spray coating process
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 328.2018, S. 26-37

CFDDEM study of residence time, droplet deposition, and collision velocity for a binary particle mixture in a Wurster fluidized bed coater
In: Drying technology: an international journal - Philadelphia, Pa.: Taylor & Francis, 1983, Bd. 36.2018, 6, S. 638-650

Color-PTV measurement and CFD-DEM simulation of the dynamics of poly-disperse particle systems in a pseudo-2D fluidized bed
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, 1951, Bd. 179.2018, S. 115-132

Continuum-scale modeling of superheated steam drying of cellular plant porous media
In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, 1960, Bd. 124.2018, S. 1033-1044

Superheated steam drying of single wood particles: A characteristic drying curve model deduced from continuum model simulations and assessed by experiments
In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 36.2018, 15, S. 1866-1881

A pore network study of evaporation from the surface of a drying nonhygroscopic porous medium
In: AIChE journal/ American Institute of Chemical Engineers - Hoboken, NJ: Wiley, 1955, Bd. 64.2018, 4, S. 1435-1447

Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 342.2019, S. 572-584, 2018

Influence of thermal conditions on particle properties in fluidized bed layering granulation
In: Processes: open access journal - Basel: MDPI, 2013, Vol. 6.2018, 12, Artikel 235

Determination of fractal dimension and prefactor of agglomerates with irregular structure
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 343.2019, S. 765-774, 2018

Spatial morphology of maltodextrin agglomerates from X-ray microtomographic data - real structure evaluation vs. spherical primary particle model
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 331.2018, S. 204-217

Monte Carlo modeling of binderLess spray agglomeration in fluidized beds
In: AIChE journal - Hoboken, NJ: Wiley, Bd. 64.2018, 10, S. 3582-3594

Experimental investigation of the morphology of salt deposits from drying sessile droplets by whitelight interferometry
In: AIChE journal - Hoboken, NJ: Wiley, 1955, Bd. 64.2018, 6, S. 2002-2016

Drying of thin porous disks from pore network simulations
In: Drying technology- Philadelphia, Pa: Taylor & Francis, 1983, Bd. 36.2018, 6, S. 651-663

Temperature gradient induced double stabilization of the evaporation front within a drying porous medium
In: Physical review fluids- College Park, MD: APS, 2016, Vol. 3.2018, 11, Artikel 114201, insgesamt 24 Seiten

Mass and heat transport models for analysis of the drying process in porous media: a review and numerical implementation
In: International journal of chemical engineering - New York, NY [u.a.]: Hindawi Publ. Corp, Vol. 2018, Article ID 9456418, insgesamt 13 Seiten

Experimental study of the particle motion in flighted rotating drums by means of Magnetic Particle Tracking
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 339.2018, S. 817-826

Drying of food materials in fluidized beds
In: Drying technologies for foods: fundamentals and applications ; Part III / edited by Prabhat K. Nema, Barjinder Pal Kaur, Arun S. Mujumdar: fundamentals and applications ; Part III - New Delhi: New India Publishing Agency (NIPA), 2018; Nema, Prabhat K. . - 2018, S. 91-108

Increasing self-sufficiency in a micro grid - integrated vs. non-integrated energy system approach
In: 2018 53rd International Universities Power Engineering Conference (UPEC): 4th-7th September 2018, Glasgow, United Kingdom : proceedings - [Piscataway, NJ]: IEEE, insges. 6 S.

Investigation of spray agglomeration process in continuously operated horizontal fluidized bed
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain - València, Spain: Universitat, S. 1855-1862 ; [Konferenz: IDS 2018]

Parameter identification for continuous fluidized bed spray agglomeration
In: 6th International Conference on Population Balance Modelling: PBM 2018 ; Conference proceedings ; Ghent, Belgium, May 6 - 9, 2018 - Ghent, Belgium: Ghent University, insges. 4 S.

CFD model-supported design of monodisperse co-current spray dryers
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain/ International Dryign Symposium - València, Spain: Universitat, 2018 . - 2018, S. 213-220 ; [Konferenz: IDS 2018]

Modeling of particle behavior in a Wurster fluidized bed - coupling CFD-DEM with Monte Carlo
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain - València, Spain: Universitat, S. 205-212 ; [Konferenz: IDS 2018]

Dependency of continuum model parameters on the spatially correlated pore structure studied by pore-network drying simulations
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain/ International Dryign Symposium - València, Spain: Universitat, 2018 . - 2018, S. 307-314 ; [Konferenz: IDS 2018]

Virtual reality-based training system for complex engineering processes on the example of a fractionating column
In: EDULEARN18- [Valencia, Spain]: IATED Academy, 2018; EDULEARN (10.:2018), insges. 10 S. ; [Konferenz: EDULEARN18]

Multi-zone & multi-compartment model for dynamic simulation of horizontal fluidized bed granulator
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain - València, Spain: Universitat, S. 123-130 ; [Konferenz: IDS 2018]

Heat and mass transfer modelling of continuous Wurster spray granulation with external product classification
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain/ International Dryign Symposium - València, Spain: Universitat, 2018 . - 2018, S. 1383-1390 ; [Konferenz: IDS 2018]

Influence of thermal conditions on particle properties in fluidized bed layering granulation
In: 6th International Conference on Population Balance Modelling: PBM 2018 ; Conference proceedings ; Ghent, Belgium, May 6 - 9, 2018 - Ghent, Belgium: Ghent University, 2018 . - 2018, insges. 8 S.

A pore-scale study on the drying kinetics and mechanical behavior of particle aggregates
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain - València, Spain: Universitat, S. 245-252 ; [Konferenz: IDS 2018]

Discrete modeling of ion transport and crystallization in layered porous media during drying
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain/ International Dryign Symposium - València, Spain: Universitat, 2018; Cárcel, Juan Andrés . - 2018, S. 299-306 ; [Konferenz: IDS 2018]

Influence of drying conditions on process properties and parameter identification for continuous fluidized bed spray agglomeration
In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain/ International Dryign Symposium - València, Spain: Universitat, 2018 . - 2018, S. 579-586 ; [Konferenz: IDS 2018]

Wärmeleitfähigkeit von Schüttschichten
In: VDI-Wärmeatlas - Wiesbaden: Springer, insges. 13 S., 2018

Wärmeleitung und Dispersion in durchströmten Schüttungen
In: VDI-Wärmeatlas - Wiesbaden: Springer, insges. 20 S., 2018

Wärmeübergang in Wirbelschichten
In: VDI-Wärmeatlas - Wiesbaden: Springer, insges. 12 S., 2018

Wärmeübergang von einer Heizfläche an ruhende oder mechanisch durchmischte Schüttungen
In: VDI-Wärmeatlas - Wiesbaden: Springer, insges. 21 S., 2018

Pore network model of primary freeze drying
In: IDS 2018- València, Spain: Universitat, 2018; International Dryign Symposium (21.:.2018), S. 221-228 ; [Konferenz: IDS 2018]

Investigation of 3D particle flow in a flighted rotating drum
In: IDS 2018 - València, Spain: Universitat, 2018; International Dryign Symposium (21.:.2018) . - 2018, S. 253-260 ; [Konferenz: IDS 2018]

CFD modeling of combustion of solid waste materials with low melting points
In: Magdeburg, 2018, xii, 204 Blätter, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Blatt 163-173]

Modellierung und experimentelle Validierung des Schwerkraftaustrags ultrafeiner kohäsiver Pulver
In: Barleben: docupoint Verlag, 2018, IX, 215 Seiten, Seite X-XX, Illustrationen, Diagramme, 21 cm ; [Literaturverzeichnis: Seite 211-215]

Intelligentes Multi-Energie-System (SmartMES) - Statusbericht der Otto-von-Guericke-Universität Magdeburg zum Verbundprojekt ; 1. Statusseminar 28. März 2018 in Magdeburg
In: Magdeburg: Otto-von-Guericke-Universität, 2018, XII, 159 Seiten, Illustrationen, Diagramme, 21 cm - (Res electricae Magdeburgenses; Band 74) ; Kongress: Statusseminar 1 (Magdeburg : 2018.03.28) ; [Literaturangaben: Seite 150-159]

Experimental investigation and correlation of the Bodenstein number in horizontal fluidized beds with internal baffles
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 308.2017, S. 378-387

DEM-CFD investigation of particle residence time distribution in top-spray fluidised bed granulation
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 161.2017, S. 187-197

Experimental study and modeling of particle drying in a continuously-operated horizontal fluidized bed
In: Particuology - Amsterdam: Elsevier, Bd. 34.2017, S. 134-146

Inline method of droplet and particle size distribution analysis in dilute disperse systems
In: Advanced powder technology: the international journal of the Society of Powder Technology, Japan - Amsterdam [u.a.]: Elsevier, Bd. 28.2017, 11, S. 2820-2829

Discrete pore network modeling of superheated steam drying
In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 35.2017, 13, S. 1584-1601

Inductive heating of fluidized beds - drying of particulate solids
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 306.2017, S. 26-33

Wärmeübergangsuntersuchung in einer induktiv beheizten Wirbelschicht mit heterogener Schichtzusammensetzung
In: Chemie - Ingenieur - Technik: CIT - Weinheim: Wiley-VCH Verl, Bd. 89.2017, 6, S. 772-784

Predictive CFD modeling of whey protein denaturation in skim milk spray drying powder production
In: Advanced powder technology: the international journal of the Society of Powder Technology, Japan - Amsterdam [u.a.]: Elsevier, Bd. 28.2017, 12, S. 3140-3147

Experimental measurements of particle collision dynamics in a pseudo-2D gas-solid fluidized bed
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 167.2017, S. 297-316

Determination of particle exchange rates at over-flow weirs in horizontal fluidised beds by particle tracking velocimetry
In: Particuology - Amsterdam: Elsevier, Bd. 32.2017, S. 1-9

Evaporation in capillary porous media at the perfect pistonlike invasion limit - evidence of nonlocal equilibrium effects
In: Water resources research: WRR - [New York]: Wiley, Bd. 53.2017, 12, S. 10433-10449

Kinematics in a slowly drying porous medium - reconciliation of pore network simulations and continuum modeling
In: Physics of fluids: devoted to the publication of original theoretical, computational, and experimental contributions to the dynamics of gases, liquids, and complex or multiphase fluids - [S.l.]: American Institute of Physics, Vol. 29.2017, 2, Art. 022102

A dynamic two-zone model of continuous fluidized bed layering granulation with internal product classification
In: Particuology - Amsterdam: Elsevier, Bd. 31.2017, S. 8-14

FMNH2-dependent monooxygenases initiate catabolism of sulfonamides in Microbacterium sp. strain BR1 subsisting on sulfonamide antibiotics
In: Scientific reports - [London] : Macmillan Publishers Limited, part of Springer Nature, Bd. 7.2017, Art.-Nr. 15783, insgesamt 11 Seiten

Experimental investigation of the influence of drying conditions on process stability of continuous spray fluidized bed layering granulation with external product separation
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 320.2017, S. 474-482

Shell porosity in spray fluidized bed coating with suspensions
In: Advanced powder technology: the international journal of the Society of Powder Technology, Japan - Amsterdam [u.a.]: Elsevier, Bd. 28.2017, 11, S. 2921-2928

Microencapsulation of walnut oil by spray drying - effects of wall material and drying conditions on physicochemical properties of microcapsules
In: Innovative food science & emerging technologies: the official journal of the European Federation of Food Science and Technology - New York, NY [u.a.]: Elsevier Science, Bd. 39.2017, S. 101-112

Investigation of heat transfer in partially filled horizontal drums
In: The chemical engineering journal - Amsterdam: Elsevier, Bd. 316.2017, S. 988-1003

Model parameters for single-droplet drying of skim milk and its constituents at moderate and elevated temperatures
In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 35.2017, 4, S. 444-464

Reduction of a model for single droplet drying and application to CFD of skim milk spray drying
In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 35.2017, 13, S. 1571-1583

Convective drying in thin hydrophobic porous media
In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Bd. 112.2017, S. 630-642

Process dynamics of continuous fluidised bed layering granulation
In: 8th International Granulation Workshop: Sheffield, UK, June 2017- Sheffield, 2017, Posternr. 2, paper 67, insgesamt 5 Seiten ; [Beitrag auf USB-Stick]

Inductive energy input in fluidized beds and its applications
In: Second Nordic Baltic Drying Conference: 7-9 June 2017, Hamburg, Germany ; proceedings - Hamburg, insges. 9 S. ; [Beitrag auf USB-Stick]

Estimation of coefficient of restitution of irregular shaped particles on horizontal substrates
In: 8th International Granulation Workshop: Sheffield, UK, June 2017 - Sheffield, oral paper 18, insgesamt 14 Seiten ; [Beitrag auf USB-Stick]

Freeze-Drying
In: Ullmann\'s encyclopedia of industrial chemistry - Chichester [u.a.]: Wiley, 2017, insgesamt 47 Seiten

Impact of the heating modes on the behavior of superheated steam drying in capillary porous media
In: EuroDrying\'2017: 6th European Drying Conference ; 19, 20, 21 June 2017, University of Liège, Belgium - Liège: University, 2017, Poster 40, insgesamt 8 Seiten ; [Beitrag auf USB-Stick]

Energy efficiency of fluidized bed coating processes with temporal separation of layering and particle drying
In: 8th International Granulation Workshop: Sheffield, UK, June 2017 - Sheffield, oral paper Nr. 6, insgesamt 11 Seiten ; [Beitrag auf USB-Stick]

Insights into the velocity field in a slowly drying capillary porous medium
In: EuroDrying\'2017: 6th European Drying Conference ; 19, 20, 21 June 2017, University of Liège, Belgium - Liège: University, 2017, Session 2, insgesamt 8 Seiten ; [Beitrag auf USB-Stick]

Modelling of continuous fluidized bed spray-granulation
In: 8th International Granulation Workshop: Sheffield, UK, June 2017 - Sheffield, Posternr. 13, paper 71, insgesamt 14 Seiten ; [Beitrag auf USB-Stick]

Influence of contact liquid dispersion on fluidized bed spray agglomeration
In: 8th International Granulation Workshop: Sheffield, UK, June 2017 - Sheffield, Posternr. 11, paper 70, insgesamt 14 Seiten ; [Beitrag auf USB-Stick]

Combined convectice and microwave drying of wet clay
In: Second Nordic Baltic Drying Conference: 7-9 June 2017, Hamburg, Germany ; proceedings - Hamburg, insges. 15 S. ; [Beitrag auf USB-Stick]

Pore scale investigation of drying under periodic temperature variation
In: EuroDrying\'2017: 6th European Drying Conference ; 19, 20, 21 June 2017, University of Liège, Belgium - Liège: University, 2017, Poster 7, insgesamt 8 Seiten ; [Beitrag auf USB-Stick]

Parameter estimation and assessment of continuum models of drying on the basis of pore network simulations
In: Barleben, docupoint Verlag, 2017, xiii, 129 Seiten, Diagramme, 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; Volume 27), ISBN 978-3-86912-130-7

Feedback control of microwave drying of solids
In: IDS 2016 - Gifu, 2016; International Dryign Symposium (20.:.2016), 2016, Art. C-5-3, insgesamt 7 S. ; [Beitrag auf USB-Stick]

Process control of continuous fluidised bed layering with internal product classification by MPC
In: PARTEC 2016 - Nürnberg, 2016 . - 2016, insges. 4 S. ; [Beitrag auf USB-Stick]

A model-based investigation of particle drying process in multi-stage fluidized bed
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016; International Dryign Symposium (20.:.2016), 2016, Art. D-5-3, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Energy saving potential in batch fluidized bed granulation process by temporal separation of sub-processes
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. C-5-1, insgesamt 6 S. ; [Beitrag auf USB-Stick]

Applications of inductive energy input in fluidized beds
In: IDS 2016 - Gifu, 2016; International Dryign Symposium (20.:.2016), 2016, Art. C-3-2, insgesamt 7 S. ; [Beitrag auf USB-Stick]

How do thermal effects influence granule properties in a horizontal fluidized bed?
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. P2-71, insgesamt 8 S. ; [Beitrag auf USB-Stick]

CFD-DEM study of residence time and collision velocity in a binary wurster fluidized bed
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016; International Dryign Symposium (20.:.2016), 2016, Art. A-3-2, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Particle dynamics and mixing behavior in a poly-disperse gas-solid fluidized bed by color-PTV measurements
In: PARTEC 2016: International Congress on Particle Technology : April 19-21, 2016, Nürnberg, Germany - Nürnberg, 2016 . - 2016, insges. 4 S. ; [Beitrag auf USB-Stick]

Discrete pore network modeling of superheated steam drying
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. A-2-2, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Pore network simulations of superheated steam drying
In: PARTEC 2016: International Congress on Particle Technology : April 19-21, 2016, Nürnberg, Germany - Nürnberg, insges. 4 S. ; [Beitrag auf USB-Stick]

Equivalence of the one-dimensional moisture diffusion model and the three-dimensional pore network drying model
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. C-1-5, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Modelling of continuous spray-coating in fluidized bed with a vertical tube air classifier
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. A-3-6, insgesamt 7 S. ; [Beitrag auf USB-Stick]

Control of multi-chamber continuous fluidized bed spray granulation
In: PARTEC 2016: International Congress on Particle Technology : April 19-21, 2016, Nürnberg, Germany - Nürnberg, 2016 . - 2016, insges. 4 S. ; [Beitrag auf USB-Stick]

Development of 3D morphological descriptors for agglomerate with complex structure
In: 6th Conference on Industrial Computed Tomography (iCT) 2016 - NDT.net, 2016 . - 2016, insges. 7 S.

Influence of process conditions on the morphology of maltodextrin agglomerates investigated by 3D X-ray images
In: PARTEC 2016 - Nürnberg, 2016 . - 2016, insges. 4 S. ; [Beitrag auf USB-Stick]

Pore network modeling of a salt solution droplet on a porous substrate - imbibition, evaporation, and crystallization
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016; International Dryign Symposium (20.:.2016), 2016, Art. A-2-3, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Monte Carlo modeling of binder-less agglomeration in fluidized beds
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. A-3-5, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Influence of drying conditions on spray fluidized bed agglomeration behavior of amorphous food powders
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. P1-53, insgesamt 6 S. ; [Beitrag auf USB-Stick]

Optimization of the walnut oil microencapsulation process using the response surface methodology
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. P1-12, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Investigation of the microstucture of single particles using [my]-computed tomography and confocal microscopy
In: PARTEC 2016 - Nürnberg, 2016 . - 2016, insges. 4 S. ; [Beitrag auf USB-Stick]

Use of X-ray micro-computed tomography in pharmaceuticals and food industry
In: 6th Conference on Industrial Computed Tomography (iCT) 2016 - NDT.net, 2016 . - 2016, insges. 6 S.

Reduction of a model for single droplet drying and application for CFD spray drying simulation
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. A-3-3, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Non-isothermal drying of thin porous disks
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016; International Dryign Symposium (20.:.2016), 2016, Art. P2-1, insgesamt 9 S. ; [Beitrag auf USB-Stick]

CFD simulation of spray dynamics in a fluidized bed operated under reduced pressure
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. P2-11, insgesamt 6 S. ; [Beitrag auf USB-Stick]

Model for drying and inactivation of baker's yeast particles in fluidized beds operated under reduced pressure
In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. C-1-2, insgesamt 8 S. ; [Beitrag auf USB-Stick]

Investigation of the residence time behavior of particulate products and correlation for the Bodenstein number in horizontal fluidized beds
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 301.2016, S. 1067-1076

Influence of pore structure and impregnation-drying conditions on the solid distribution in porous support materials
In: Drying technology: an international journal - Philadelphia, Pa.: Taylor & Francis, 1983, Bd. 34.2016, 16, S. 1964-1978

Influence of operation parameters on process stability in continuous fluidised bed layering with external product classification
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 300.2016, S. 37-45

Model predictive control of continuous layering granulation in fluidised beds with internal product classification
In: Journal of process control: a journal affiliated with IFAC, the International Federation of Automatic Control - Amsterdam [u.a.]: Elsevier Science, 1991, Bd. 45.2016, S. 65-75

Two-phase and two-dimensional model describing heat and water transfer during solid-state fermentation within a packed-bed bioreactor
In: The chemical engineering journal - Amsterdam: Elsevier, Bd. 287.2016, S. 103-116

Untersuchung des dynamischen Verhaltens der Sprühgranulation in kontinuierlich betriebenen Wirbelschichtrinnen
In: Chemie - Ingenieur - Technik: CIT- Weinheim: Wiley-VCH Verl, 1949, Bd. 88.2016, 9, S. 1359-1360

Inductive heating of a cylindrical fluidized bed
In: Journal of chemical technology and metallurgy - Sofia: University of Chemical Technology and Metallurgy, 2013, Bd. 51.2016, 6, S. 627-638

Modellbasierte Berechnung des Benetzungsgrades in einer zylindrischen Wirbelschicht mit Flüssigkeitseindüsung
In: Chemie - Ingenieur - Technik - Weinheim: Wiley-VCH Verl, 1949, Bd. 88.2016, 8, S. 1109-1118

Modellbasierte Untersuchung des Wärmeübergangs in einer induktiv beheizten Wirbelschicht
In: Chemie - Ingenieur - Technik - Weinheim: Wiley-VCH Verl, 1949, Bd. 88.2016, 5, S. 656-665

An accurate and efficient discrete formulation of aggregation population balance equation
In: Kinetic and related models : KRM. - Springfield, Mo : AIMS, Bd. 9.2016, 2, S. 373-391

Pore network simulations of heat and mass transfer inside an unsaturated capillary porous wick in the dry-out regime
In: Transport in porous media: TIPM - Dordrecht [u.a.]: Springer Science + Business Media B.V, Bd. 114.2016, 3, S. 623-648

Reduction of energy consumption in batch fluidized bed layering granulation processes by temporal separation
In: Chemical engineering research and design : CERD. - Amsterdam : Elsevier, Bd. 110.2016, S. 2-11

Three dimensional characterization of morphology and internal structure of soft material agglomerates produced in spray fluidized bed by X-ray tomography
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 300.2016, S. 46-60

Interaction of droplets with porous structures - pore network simulation of wetting and drying
In: Drying technology: an international journal - Philadelphia, Pa.: Taylor & Francis, 1983, Bd. 34.2016, 9, S. 1129-1140

Finite volume approximations of breakage population balance equation
In: Chemical engineering research and design : CERD. - Amsterdam : Elsevier, Bd. 110.2016, S. 114-122

Experimental and numerical study of the airflow distribution in mixed-flow grain dryers
In: Drying technology: an international journal - Philadelphia, Pa.: Taylor & Francis, 1983, Bd. 34.2016, 5, S. 595-607

Drying behavior and locking point of single droplets containing functional oil
In: Advanced powder technology - Amsterdam [u.a.]: Elsevier, 1990, Bd. 27.2016, 4, S. 1750-1760

A volume-consistent discrete formulation of aggregation population balance equations
In: Mathematical methods in the applied sciences. - Chichester, West Sussex : Wiley, Bd. 39.2016, 9, S. 2275-2286

An improved and efficient finite volume scheme for bivariate aggregation population balance equation
In: Journal of computational and applied mathematics. - Amsterdam [u.a.] : North-Holland, Bd. 308.2016, S. 83-97

Micro-model experiments and pore network simulations of liquid imbibition in porous media
In: Chemical engineering science. - Amsterdam [u.a.] : Elsevier Science, Bd. 150.2016, S. 41-53

Enhanced methods for experimental investigation of single droplet drying kinetics and application to lactose/water
In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 34.2016, 10, S. 1185-1195

Capillary valve effect during slow drying of porous media
In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, 1960, Bd. 94.2016, S. 81-86

Two-phase flow with capillary valve effect in porous media
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 139.2016, S. 241-248

Agglomeration
In: Encyclopedia of food and health - Amsterdam [u.a.]: Elsevier, Acad. Press, S. 73-81, 2016

Bifurcation analysis of process stability of continuous fluidized bed agglomeration with external product classification
In: Computer aided chemical engineering - Amsterdam [u.a.]: Elsevier, 1997, Bd. 38.2016, S. 1881-1886

Process intensification of batch fluidized bed layering granulation processes by temporal separation of sub-processes
In: PARTEC 2016 : International Congress on Particle Technology : April 19-21, 2016, Nürnberg, Germany. - Nürnberg, insges. 4 S.[Beitrag auf USB-Stick]

Influence of mill characteristics on stability of continuous layering granulation with external product classification
In: Computer aided chemical engineering - Amsterdam [u.a.]: Elsevier, 1997, Bd. 38.2016, S. 1275-1280

Spray fluidized bed agglomeration of amorphous food powders
In: PARTEC 2016 : International Congress on Particle Technology : April 19-21, 2016, Nürnberg, Germany. - Nürnberg, insges. 4 S.[Beitrag auf USB-Stick]

CFD simulation of the hydrodynamics of fluidized beds operated under reduced pressure
In: PARTEC 2016 : International Congress on Particle Technology : April 19-21, 2016, Nürnberg, Germany. - Nürnberg, insges. 4 S.[Beitrag auf USB-Stick]

Wirbelschichttrocknung pastöser Biomasse mit überhitztem Wasserdampf bis 4 bar
In: Magdeburg, 2016, XV, 282 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 212-225]

Influence of operation parameters onprocess stability in conzinuous fluidised bed layering with external classification
In: 7th International Granulation Workshop: Sheffield, UK, 2015 - Sheffield, 2015 . - 2015, insges. 11 S. ; [Beitrag auf USB-Stick]

Discrete analysis of particle collision behavior in fluidized beds
In: 7th International Granulation Workshop: Sheffield, UK, 2015 - Sheffield, 2015 . - 2015, insges. 11 S. ; [Beitrag auf USB-Stick]

Reduction of energy consumption in batch fluidized bed layering granulation processes by temporal separation
In: 7th International Granulation Workshop: Sheffield, UK, 2015 - Sheffield, insges. 14 S. ; [Beitrag auf USB-Stick]

Micro-structure of maltodextrin agglomerates produced by fluidized bed
In: 7th International Granulation Workshop - Sheffield, 2015 . - 2015, insges. 16 S. ; [Beitrag auf USB-Stick]

Stochastic modeling of layering growth processes in fluidized beds
In: 7th International Granulation Workshop: Sheffield, UK, 2015 - Sheffield, insges. 15 S. ; [Beitrag auf USB-Stick]

Finite volume approximations of population balance equations
In: 7th International Granulation Workshop: Sheffield, UK, 2015 - Sheffield, insges. 12 S. ; [Beitrag auf USB-Stick]

Experimental analysis of the microstructure of single particles
In: 7th International Granulation Workshop - Sheffield, 2015 . - 2015, insges. 20 S. ; [Beitrag auf USB-Stick]

Analysis of residence time distribution data in horizontal fluidized beds
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, 2009, Bd. 102.2015, S. 790-798

Model-based control of enzyme yield in solid state fermentation
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 102.2015, S. 362-371

Model-based control of particle properties in fluidised bed spray granulation
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Vol. 270.2014, Part B, S. 575-583, 2015

Drying kinetics and microstructural and sensoryproperties of black chokeberry (aronia melanocarpa) as affected by drying method
In: Food and bioprocess technology: an international journal - New York, NY: Springer Science + Business Media, LLC, 2008, Bd. 8.2015, 1, S. 63-74

Influence of zone formation on stability of continuous fluidized bed layering granulation with external product classification
In: Particuology - Amsterdam: Elsevier, 2008, Bd. 23.2015, S. 1-7

A comparative study on optical techniques for the estimation of granular flow velocities
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 131.2015, S. 63-75

Estimation of particle dynamics in 2-D fluidized beds using particle tracking velocimetry
In: Particuology - Amsterdam: Elsevier, Bd. 22.2015, S. 39-51

Estimation of particle rotation in fluidized beds by means of PTV
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 102.2015, S. 841-849

Influence of granule porosity during fluidized bed spray granulation
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 102.2015, S. 458-467

Prediction of shell porosities in continuous fluidized bed spray layering
In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 33.2015, 13, S. 1662-1670

A new approach in population balance modeling of spray fluidized bed agglomeration
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 102.2015, S. 1399-1407

A new framework for population balance modeling of spray fluidized bed agglomeration
In: Particuology - Amsterdam: Elsevier, Bd. 19.2015, S. 141-154

Modeling aggregation kinetics of fluidized bed spray agglomeration for porous particles
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Vol. 270.2015, Part B, S. 584-591

Inductive heating of fluidized beds - influence on fluidization behavior
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 286.2015, S. 90-97

Monitoring of initial porosity and new pores formation during drying - a scientific debate and a technical challenge
In: Trends in food science & technology - Amsterdam [u.a.]: Elsevier Science, 1990, Bd. 45.2015, 2, S. 179-186

Development and convergence analysis of a finite volume scheme for solving breakage equation
In: SIAM journal on numerical analysis - Philadelphia, Pa: SIAM, Bd. 53.2015, 4, S. 1672-1689

Dynamic multi-zone population balance model of particle formulation in fluidized bed
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 102.2015, S. 1456-1465

Influence of drying conditions on layer porosity in fluidized bed spray granulation
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 272.2015, S. 120-131

Stochastic modelling of particle coating in fluidized beds
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 102.2015, S. 996-1005

Experimental investigation of process stability of continuous spray fluidized bed layering with external product separation
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, 1951, Bd. 137.2015, S. 466-475

Experimental investigation of process stability of continuous spray fluidized bed layering with internal separation
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, 1951, Bd. 126.2015, S. 55-66

Experimental investigation of the continuous fluidized bed spray granulation with internal classification
In: Procedia engineering - Amsterdam [u.a.]: Elsevier, Bd. 102.2015, S. 565-574

Comparative analysis of the coating thickness on single particles using X-ray micro-computed tomography and confocal laser-scanning microscopy
In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 287.2015, S. 330-340

Investigation of coating layer morphology by micro-computed X-ray tomography
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 273.2015, S. 165-175

Lotion distribution in wet wipes investigated by pore network simulation and X-ray micro tomography
In: Transport in porous media: TIPM - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1986, Bd. 107.2015, 2, S. 449-468

Multiscale approaches to processes that combine drying with particle formation
In: Drying technology: an international journal - Philadelphia, Pa.: Taylor & Francis, 1983, Bd. 33.2015, 15/16, S. 1859-1871

Drying with formation of capillary rings in a model porous medium
In: Transport in porous media - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1986, Bd. 110.2015, 2, S. 197-223

Reconsideration of the hydrodynamic behavior of fluidized beds operated under reduced pressure
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 287.2015, S. 169-176

Induktiver Energieeintrag in Wirbelschichten
In: Forschung vernetzen - Innovation beschleunigen: 16. Forschungskolloquium am Fraunhofer IFF - Magdeburg, S. 22-28, 2015

Untersuchung der Produktqualität bei der Wirbelschichtsprühgranulation mit induktiver Energiezufuhr
In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015 - Magdeburg: Otto-von-Guericke-Universität Magdeburg, 2015 . - 2015, insges. 10 S. ; Kongress: Magdeburger Maschinenbau-Tage 12 (Magdeburg : 2015.09.30-10.01)

Untersuchung zur dreidimensionalen Verfolgung der Partikelbewegung in Wirbelschichtapparaten
In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015 - Magdeburg: Otto-von-Guericke-Universität Magdeburg, 2015 . - 2015, insges. 10 S. ; Kongress: Magdeburger Maschinenbau-Tage 12 (Magdeburg : 2015.09.30-10.01)

Variabler Ausführungskontext von kooperativen Anwendungen für Multi-Roboter-Systeme (VORAUS)
In: Forschung vernetzen - Innovation beschleunigen - 16. Forschungskolloquium am Fraunhofer IFF: 16. Forschungskolloquium am Fraunhofer IFF - Magdeburg, 2015 . - 2015, S. 36-41

Experimental determination of drying kinetics of skim-milk suspended droplet
In: First Nordic Baltic Drying Conference - Gdańsk, 2015 . - 2015, insges. 8 S. ; [Beitrag auf USB-Stick]

An advanced modeling and experimental validation of single droplet drying process
In: Food science research and innovation: delivering sustainable solutions to the global economy and society: 29th EFFost Internatinal Conference - Elsevier, 2015 . - 2015, S. 58-63

Liquid distribution and structural changes during convective drying of gels
In: Colloid Process Engineering - Cham: Springer, 2015; Kind, Matthias . - 2015, S. 93-112

Pore network simulation of heat and mass transfer in superheated steam drying
In: EuroDrying\'2015 - 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings: 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings - Szent István University, 2015 . - 2015, S. 211-219

Pore network model for drying of salt solutions - solute migration and crystallization
In: First Nordic Baltic Drying Conference: 17-19 Juni 2015, Gdańsk, Poland ; proceedings - Gdańsk, 2015; Goncharova-Alves, Svetlana . - 2015, insges. 15 S. ; [Beitrag auf USB-Stick]

Pore network simulation of salt crystallization in drying porous media
In: EuroDrying\'2015 - 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings: 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings - Szent István University, 2015; Farkas, I. . - 2015, S. 345-352

Modeling of layering growth processes using a Monte Carlo approach
In: Abstract volume: 8th Vienna Conference on Mathematical Modelling, February 18 - 20, 2015, Vienna University of Technology, Austria// MATHMOD 2015 - Vienna: ARGESIM, S. 99-104 ; Kongress: MATHMOD 8 (Vienna : 2015.02.18-20)

A new validated model for single droplet drying process
In: First Nordic Baltic Drying Conference: 17-19 Juni 2015, Gdańsk, Poland ; proceedings - Gdańsk, insges. 10 S. ; [Beitrag auf USB-Stick]

Niedertemperaturgranulierung von Mikroorganismen
In: Magdeburg Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2015, XVII, 172 S., Ill., graph. Darst.

Intensification of fluidized-bed processes for drying and formulation
In: Process intensification - Weinheim: WILEY-VCH, S. 85-130, 2014

Experimental spray zone characterization in top-spray fluidized bed granulation
In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 116.2014, S. 317-330

Modellbasierte Regelung der Partikelgrößenverteilung in der kontinuierlichen Wirbelschicht-Sprühgranulation
In: Chemie - Ingenieur - Technik: CIT - Weinheim: Wiley-VCH Verl, Bd. 86.2014, 5, S. 725-733

Influence of process variables on internal particle structure in spray fluidized bed agglomeration
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 258.2014, S. 165-173

Study of the morphology of solidified binder in spray fluidized bed agglomerates by X-ray tomography
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 264.2014, S. 256-264

Modeling of aggregation kernel using Monte Carlo simulations of spray fluidized bed agglomeration
In: AIChE journal - Hoboken, NJ: Wiley, Bd. 60.2014, 3, S. 855-868

On two-compartment population balance modeling of spray fluidized bed agglomeration
In: Computers & chemical engineering: an international journal of computer applications in chemical engineering - Amsterdam [u.a.]: Elsevier Science, Bd. 61.2014, S. 185-202

Minimization of particle dispersion in a continuous horizontal fluidized bed
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, 2014; Andrieu, Julien . - 2014, insges. 5 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Size enlargement
In: Ullmann\'s encyclopedia of industrial chemistry - Chichester [u.a.]: Wiley, insges. 47 S., 2014

Physical and sensory properties of chokeberry fruits dried with different methods
In: IDS 2014 : proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France. - Les Ulis : EDP Sciences, insges. 6 S. ; Kongress: IDS 2014; 19 (Lyon, France) : 2014.08.24-27

Two-phase model describing heat and water transfer during solid-state fermentation within a packed bed bioreactor
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 8 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Analysis influence of drying rate on spital morphology of agglomerates
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 5 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Characterization of particle dynamics in fluidized beds by means of particle tracking velocimetry
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 7 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Influence of drying conditions to the product quality during continuous fluidized bed spray granulation
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 7 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Dynamic modelling of particle formulation in horizontal fluidized beds
In: 24th European Symposium on Computer Aided Process Engineering: [ESCAPE-24, held in Budapest, Hungary, from 15 to 18 June 2014] ; Pt. A. - Amsterdam [u.a.] : Elsevier, S. 1765-1770 - (Computer-aided chemical engineering; 33) ; Kongress: ESCAPE; 24 (Budapest, Hungary) : 2014.06.15-18

Multi-zone for layering granulation in horizontal fluidized beds
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 7 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Pore network simulations to determine the influence of pore structure on wetting-drying kinetics of porous particles
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, 2014; Andrieu, Julien . - 2014, insges. 8 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Monte Carlo modelling of particle coating in fluidized beds
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 7 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Numerical modeling of mixed grain drying with CFD and DEM
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, 2014; Andrieu, Julien . - 2014, insges. 8 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Experimental investigation of continuous fluidized bed spray granulation with internal classification
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 7 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Experimental analysis of the micro-structure of single particles and micro-droplets
In: IDS 2014 - Les Ulis: EDP Sciences, 2014; Andrieu, Julien . - 2014, insges. 6 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Particle morphology as a mean for investigating single droplet drying of dairy products
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 5 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Multi-scale approaches to processes that combine drying with particle formation
In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, insges. 13 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Isothermal drying in the presence of capillary liquid films - comparison of experiments with pore network simulations in a model system
In: IDS 2014 - Les Ulis: EDP Sciences, 2014 . - 2014, insges. 7 S. ; Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Visualization and modeling of liquid film rings observed during drying of particle packings
In: IDS 2014 : proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France. - Les Ulis : EDP Sciences, insges. 8 S. ; Kongress: IDS 2014; 19 (Lyon, France) : 2014.08.24-27

Wärmeübergang und Strömungsformen beim Sieden in Minikanälen
In: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014, XVIII, 141 S., graph. Darst.

Morphological characterization of agglomerates produced in a spray fluidized bed by X-ray tomography
In: Zugl.: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014: Barleben: Docupoint-Verl., XIV, 173 S., Ill., graph. Darst., 21 cm - (docupoint Wissenschaft; Micro-macro transactions; 7) ; [Mit engl. u. dt. Zsfassung. - Literaturverz. S. 143 - 152]

Micro-macro transition from discrete modeling to population balances in spray fluidized bed agglomeration
In: Zugl.: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014: Barleben: Docupoint-Verl., XVI, 154 S., Ill., graph. Darst., 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; 13) ; [Zusammenfassung in engl. und dt. Sprache. - Literaturverz. S. 144 - 151]

Entwicklung von überzogenen Pellets mit funktionellen Schichten in der diskontinuierlichen Wirbelschichttechnik
In: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014, XII, 197 S., Ill., graph. Darst.

Liquid imbibition in porous media investigated by pore network models and pore-scale experiments
In: Zugl.: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2014: Barleben: Docupoint-Verl., XIV, 172 S., Ill., graph. Darst., 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; 12)

Modern drying technology. Vol. 5: Process intensification
In: Weinheim: WILEY-VCH, 2014, XXXIII, 372 S., Ill., graph. Darst. ; [Literaturangaben]

Spray zone demarcation in top-spray fluidised bed granulation by droplet detection methods
In: 6th International Granulation Workshop. - Sheffield, insges. 12 S., 2013 ; Kongress: International Granulation Workshop; 6 (Sheffield, UK) : 2013.06

Model-based control of particle properties in fluidised bed spray granulation
In: 6th International Granulation Workshop. - Sheffield, insges. 14 S., 2013 ; Kongress: International Granulation Workshop; 6 (Sheffield, UK) : 2013.06

Influence of process variables on Particle morphology in spray fluidized bed agglomeration
In: 6th International Granulation Workshop. - Sheffield, insges. 14 S., 2013 ; Kongress: International Granulation Workshop; 6 (Sheffield, UK) : 2013.06

Simulating the spray fluidized bed granulation by modeling the agregation efficiency
In: 6th International Granulation Workshop. - Sheffield, insges. 14 S., 2013 ; Kongress: International Granulation Workshop; 6 (Sheffield, UK) : 2013.06

Experimental study of the airflow distribution during mixed-flow grain drying
In: European Drying\'2013: Paris, 2 - 4 October 26-28 ; proceedings, oral presentationen / eds. Giana Almeida ...: Paris, 2 - 4 October 26-28 ; proceedings, oral presentationen - Paris, 2013; Almeida, Giana . - 2013, insges. 8 S. ; Kongress: EuroDrying 2013 (Paris : 2013.10.02-04)

Pore-scale visualization and simulation of liquid films for drying particle packing
In: European Drying\'2013 : Paris, 2 - 4 October 26-28 ; proceedings, oral presentationen. - Paris, insges. 8 S. ; Kongress: EuroDrying 2013; (Paris) : 2013.10.02-04

Derivation of parameters for a two compartment population balance model of Wurster fluidised bed granulation
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 238.2013, S. 122-131

Stochastic modeling of fluidized bed agglomeration - determination of particle moisture content
In: Drying technology. - Philadelphia, Pa : Taylor & Francis, Bd. 31.2013, 15, S. 1764-1771

Emissionen von Automobillackieranlagen - ökobilanzielle Betrachtung der thermischen Nachverbrennung im Unterbodenschutz
In: Chemie - Ingenieur - Technik. - Weinheim : Wiley-VCH Verl, Bd. 85.2013, 10, S. 1632-1637

Continuous pellet coating in a Wurster fluidized bed process
In: Chemical engineering science. - Amsterdam [u.a.] : Elsevier Science, Bd. 86.2012, S. 87-98, 2013

Modeling spray fluidized bed aggregation kinetics on the basis of Monte-Carlo simulation results
In: Chemical engineering science. - Amsterdam [u.a.] : Elsevier Science, Bd. 101.2013, S. 35-45

Micro-scale fluid model for drying of highly porous particle aggregates
In: Computers & chemical engineering : an international journal of computer applications in chemical engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 52.2013, S. 46-54

Experimental investigation of drying in a model porous medium - influence of thermal gradients
In: Drying technology - Philadelphia, Pa: Taylor & Francis, 1983, Bd. 31.2013, 8, S. 920-929

Atomization characteristic into a top-spray fluidised bed obtained by an experimental and DEM-CFD approach
In: PARTEC 2013. - Nürnberg : Nürnberg Messe, insges. 4 S. ; Kongress: PARTEC 2013; (Nürnberg) : 2013.04.23-25

Control of particle properties in fluidised bed granulation processes
In: PARTEC 2013 - Nürnberg: Nürnberg Messe, 2013 . - 2013, insges. 4 S. ; Kongress: PARTEC 2013 (Nürnberg : 2013.04.23-25)

Stochastic modelling of fluidised bed spray agglomeration focussing on the structure of particles
In: PARTEC 2013. - Nürnberg : Nürnberg Messe, insges. 4 S. ; Kongress: PARTEC 2013; (Nürnberg) : 2013.04.23-25

Particle formation in fluidized bed spray granulation
In: PARTEC 2013. - Nürnberg : Nürnberg Messe, insges. 4 S. ; Kongress: PARTEC 2013; (Nürnberg) : 2013.04.23-25

Discrete three-dimensional model for drying particle aggregates
In: PARTEC 2013 : International Congress for Particle Technology ; Nürnberg, Germany, 23. - 25.4.2013 ; together with POWTECH 2013, TechnoPharm 2013 ; abstracts and proceedings. - Nürnberg : Nürnberg Messe, insges. 4 S. ; Kongress: PARTEC 2013; (Nürnberg) : 2013.04.23-25

Kinetic analysis of biomass combustion in fluidized beds
In: PARTEC 2013: International Congress for Particle Technology ; Nürnberg, Germany, 23. - 25.4.2013 ; together with POWTECH 2013, TechnoPharm 2013 ; abstracts and proceedings - Nürnberg: Nürnberg Messe, 2013 . - 2013, insges. 4 S. ; Kongress: PARTEC 2013 (Nürnberg : 2013.04.23-25)

Wärmeleitfähigkeit von Schüttschichten
In: VDI-Wärmeatlas. - Berlin [u.a.] : Springer Vieweg, S. 651-660, 2013

Wärmeleitung und Dispersion in durchströmten Schüttungen
In: VDI-Wärmeatlas. - Berlin [u.a.] : Springer Vieweg, S. 1517-1534, 2013

Wärmeübergang von einer Heizfläche an ruhende oder mechanisch durchmischte Schüttungen
In: VDI-Wärmeatlas. - Berlin [u.a.] : Springer Vieweg, S. 1499-1516, 2013

Morphological characterization of spray fluidized bed agglomerates by using x-ray [m]-computed tomography
In: Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures. Politecnico di Torino, Department of Mechanical and Aerospace Engineering Italy, 18 to 20 June 2012 - Torino: Politecnico di Torino, 2012, Artikelnr. 73, insg. 1 S.

Population balance modeling of moisture content distributions in semi-batch fluidized bed drying
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 8 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Morphological characterization of fluidized bed spray drying agglomerates bx x-ray tomography
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 7 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Stochastic modeling of fluid bed agglomeration - determination of particle moisture content
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 6 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Continuous pellet coating in a wurster fluidized bed process
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, insges. 7 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Influence of process parameters on the particle surface structure in fluidized bed spray granulation
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 6 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Modeling the effect of process parameters in aggregation kernel of PBE using Monte-Carlo simulations
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 8 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Direct imaging od convective drying process for single and dual cells of two-dimensional particle packings
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 7 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Influence of wetting properties on drying behavior of highly porous particle aggregates
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 9 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Investigation of lotion distribution in wet wipes by pore network model and micro computed tomography
In: Fourth international conference on porous media and its applications in science, engineering, and industry: June 17-22, 2012, Potsdam, Germany ; proceedings - Potsdam, insges. 7 S. ; Kongress: International Conference on Porous Media and Its Applications in Science, Engineering and Industry 4 (Potsdam : 2012.06.17-22)

Modeling droplet evolution on a porous particle as micro-scale process in fluidized bed spray drying
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 8 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Experimental investigation of drying by pore networks - influence of pore size distribution and temperature
In: Fourth international conference on porous media and its applications in science, engineering, and industry - Potsdam, 2012 . - 2012, insges. 6 S. ; Kongress: International Conference on Porous Media and Its Applications in Science, Engineering and Industry 4 (Potsdam : 2012.06.17-22)

Pore-scale comparison of liquid distributions between pore network drying simulations and x-ray tomography
In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 8 S. ; Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Population balance model for drying of droplets containing aggregating nanoparticles
In: AIChE journal - Hoboken, NJ: Wiley, Bd. 58.2012, 11, S. 3318-3328

Characterization of the internal morphology of agglomerates produced in a spray fluidized bed by X-ray tomography
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier, 1967, Bd. 228.2012, S. 349-358

A novel, structure-tracking monte carlo algorithm for spray fluidized bed agglomeration
In: AIChE journal/ American Institute of Chemical Engineers - Hoboken, NJ: Wiley, 1955, Bd. 58.2012, 10, S. 3016-3029

Continuous species transport and population balance models for first drying stage of nanosuspension droplets
In: Chemical engineering journal - Amsterdam: Elsevier, Bd. 210.2012, S. 120-135

Fractal phase distribution and drying - impact on two-phase zone scaling and drying time scale dependence
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, Bd. 30.2012, 11/12, S. 1129-1135

Guest editorial: Special Issue to Commemorate 30 Years of Drying Technology
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, 1983, Bd. 30.2012, 11/12, S. 1125-1126

Influence of drying kinetics on particle formation - a personal perspective
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, 1983, Bd. 30.2012, 11/12, S. 1167-1175

Model-based measurement and control of fluidised bed spray granulation processes
In: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2012, XII, 190 S., Ill., graph. Darst.

Modelle zur Untersuchung des Einflusses von Poreneffekten auf das Trocknungsverhalten kapillarporöser Medien
In: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Habil.-Schr., 2012, Getr. Zählung [ca. 278 S.], Ill., graph. Darst.

Modern drying technology. Vol. 4: Energy savings
In: Weinheim: Wiley-VCH, 2012, XXXIII, 342 S., Ill., graph. Darst. ; [Literaturangaben]

Numerical simulation of particulate processes for control and estimation by spectral methods
In: AIChE journal: an official publication of the American Institute of Chemical Engineers : chemical engineering research and development - Hoboken, NJ: Wiley-Blackwell, Bd. 58.2012, 8, S. 2309-2319

An irregular pore network model for convective drying and resulting damage of particle aggregates
In: Chemical engineering science - Amsterdam: Elsevier, 1951, Bd. 75.2012, S. 267-278

Application of experimental parameters in an extended PBM of a Wurster fluidised bed granulation
In: 5th International Granulation Workshop. - Lausanne, insges. 8 S., 2011 ; Kongress: International Granulation Workshop; 5 (Lausanne, Switzerland) : 2011.06.20-22

Model-based measurement and control of fluidised bed layering granulation processes
In: 5th International Granulation Workshop. - Lausanne, 2011 ; Kongress: International Granulation Workshop; 5 (Lausanne, Switzerland) : 2011.06.20-22

Simulation of fluidised bed spray agglomeration focussing on the pre-drying of droplets
In: 5th International Granulation Workshop: Lausanne, Switzerland, 20-22 June 2011 - Lausanne, 2011, 2011, paper 79, insgesamt 9 S. ; Kongress: International Granulation Workshop 5 (Lausanne, Switzerland : 2011.06.20-22) ; [Beitrag auf CD-ROM]

Simulation of in-line particle sizing techniques during agglomeration processes
In: 5th International Granulation Workshop: Lausanne, Switzerland, 20-22 June 2011 - Lausanne, 2011, 2011, paper 116, insgesamt 9 S. ; Kongress: International Granulation Workshop 5 (Lausanne, Switzerland : 2011.06.20-22) ; [Beitrag auf CD-ROM]

Investigation of growth kinetics in fluidized bed spray granulation
In: 5th International Granulation Workshop: Lausanne, Switzerland, 20-22 June 2011 - Lausanne, 2011, 2011, paper 80, insgesamt 10 S. ; Kongress: International Granulation Workshop 5 (Lausanne, Switzerland : 2011.06.20-22) ; [Beitrag auf CD-ROM]

Continuous pellet coating for the pharmaceutical industry
In: 5th International Granulation Workshop. - Lausanne, insges. 14 S., 2011 ; Kongress: International Granulation Workshop; 5 (Lausanne, Switzerland) : 2011.06.20-22

Modeling of particle formation from a single nano suspension droplet
In: 5th International Granulation Workshop. - Lausanne, insges. 16 S., 2011 ; Kongress: International Granulation Workshop; 5 (Lausanne, Switzerland) : 2011.06.20-22

Stochastic simulation of fluidized bed spray agglomeration
In: Proceedings of the 5th Nordic Drying Conference: June 18th to 21st 2011, Helsinki, Finland - Trondheim: SINTEF, 2011 . - 2011, insges. 4 S. ; Kongress: NDC 5 (Helsinki, Finland : 2011.06.18-21) ; [Beitrag auf CD-ROM]

Food drying as a challenge between process efficiency and product quality
In: Food process engineering in a changing world. - Athens, insges. 6 S., 2011 ; Kongress: ICEF; 11 (Athens, Greece) : 2011.05.22-26

Particle formulation in spray fluidized beds
In: Modern drying technology ; Vol. 3: Product quality and formulation. - Weinheim : Wiley-VCH, S. 295-378, 2011

On the combination of particle formation and drying kinetics
In: Proceedings of the 3rd European Drying Conference (EuroDrying), October 26-28, 2011, Palma de Mallorca/Spain. - Palma de Mallorca : Universitat de les Illes Balears, insges. 6 S.

On the influence ot temperature gradients on drying of pore networks
In: EuroDrying\'2011 - [Palma (Illes Balears)]: [Universitat de les Illes Balears], 2011; European Drying Conference (3.:2011) . - 2011, insges. 3 S.

Visualization of liquid in drying particle aggregates by X-ray microtomography and use for pore-scale modelling
In: Proceedings of the 3rd European Drying Conference (EuroDrying), October 26-28, 2011, Palma de Mallorca/Spain - Palma de Mallorca: Universitat de les Illes Balears, insges. 3 S.

Modern drying technology. Vol. 3: Product quality and formulation
In: Weinheim: Wiley-VCH, 2011, XXXV, 394 S., Ill., graph. Darst. ; [Literaturangaben]

Particle residence times in fluidized bed granulation equipments
In: Chemical engineering & technology. - Weinheim : Wiley-VCH, Bd. 34.2011, 7, S. 1116-1122

Particle Residence Times in Fluidized Bed Granulation Equipments
In: Chemical engineering & technology . - Weinheim : Wiley-VCH, Bd. 34.2011, 7, S. 1116-1122

Model-based measurement of particle size distributions in layering granulation processes
In: AIChE journal. - Hoboken, NJ : Wiley-Blackwell, Bd. 57.2011, 4, S. 929-941

Stochastic modeling of fluidized bed granulation - influence of droplet pre-drying
In: Chemical engineering & technology. - Weinheim : Wiley-VCH, Bd. 34.2011, 7, S. 1177-1184

Stochastische Modellierung der Partikelbildung in Wirbelschichten
In: Chemie - Ingenieur - Technik. - Weinheim : Wiley-VCH Verl, Bd. 83.2011, 5, S. 665-671

Restoration of particle size distributions from fiber-optical in-line measurements in fluidized bed processes
In: Chemical engineering science - journal internat. de génie chimique - Amsterdam: Elsevier, 1951, Bd. 66.2011, 12, S. 2842-2852

Particle-gas mass transfer in a spouted bed with adjustable air inlet
In: Drying technology. - New York, NY [u.a.] : Dekker, Bd. 29.2011, 3, S. 257-265

Prozessdynamik der Wirbelschichtgranulierung
In: Chemie - Ingenieur - Technik. - Weinheim : Wiley-VCH Verl, Bd. 83.2011, 5, S. 658-664

Residence time distribution in mixed-flow grain dryers
In: Drying technology. - New York, NY [u.a.] : Dekker, Bd. 29.2011, 11, S. 1252-1266

Particle velocity profiles and residence time distribution in mixed-flow grain dryers
In: Granular matter. - Berlin : Springer-Verl., Bd. 13.2011, 3, S. 159-168

A proposal for discrete modeling of mechanical effects during drying, combining pore networks with DEM
In: AIChE journal: an official publication of the American Institute of Chemical Engineers : chemical engineering research and development - Hoboken, NJ: Wiley-Blackwell, Bd. 57.2011, 4, S. 872-885

Biomass combustion in a fluidized-bed-system - an integrated model for dynamic plant simulations
In: Industrial & engineering chemistry research. - Washington, DC : American Chemical Society, Bd. 50.2011, 17, S. 9936-9943

Moisture content and residence time distributions in mixed-flow grain dryers
In: Biosystems engineering. - London : Academ. Press, Bd. 109.2011, 4, S. 297-307

An analytical solution of population balance equations for continuous fluidized bed drying
In: Chemical engineering science. - Amsterdam : Elsevier, Bd. 66.2011, 9, S. 1916-1922

Investigation of the kinetics of fluidized bed spray agglomeration based on stochastic methods
In: AIChE journal. - Hoboken, NJ : Wiley-Blackwell, Bd. 57.2011, 11, S. 3012-3026

Kinetics of fluidized bed spray agglomeration for compact and porous particles
In: Chemical engineering science. - Amsterdam : Elsevier, Bd. 66.2011, 9, S. 1866-1878

Three-dimensional micro-scale model for convective drying
In: Conference proceedings, 2011 AIChE annual meeting: Minneapolis, USA, October 16 - 21, 2011 - New York, NY: American Inst. of Chemical Engineers, insges. 9 S.

Mathematical modelling and simulation of during of a droplet with suspended particles
In: International Conference on Population Balance Modelling <4, 2010, Berlin> : 4th International Conference on Population Balance Modelling . - Berlin : Max-Planck-Institut für Dynamik komplexer technischer Systeme, S. 99-110 ; Kongress: PBM 2010; 4 (Berlin) : 2010.09.15-17

Pore network modeling of mechanical effects during drying
In: Third Internatinal Conference on Porous Media and its Applications in Science, Engineering and Industry : June 20-25, 2010 Montecatini, Italy ; proceedings. - Montecatini, insges. 6 S. ; Kongress: ICPM; 3 (Montecatini, Italy) : 2010.06.20-25

Modeling and simulation of convective drying of gels
In: Third Internatinal Conference on Porous Media and its Applications in Science, Engineering and Industry. - Montecatini, insges. 6 S., 2010 ; Kongress: ICPM; 3 (Montecatini, Italy) : 2010.06.20-25

Drying of porous media - a comparison of discrete and continuous models
In: Third Internatinal Conference on Porous Media and its Applications in Science, Engineering and Industry - Montecatini, 2010 . - 2010, insges. 9 S. ; Kongress: ICPM 3 (Montecatini, Italy : 2010.06.20-25)

Particle residence times in fluidized bed granulation
In: Drying 2010; Vol. B: . - Barleben-Magdeburg : Docupoint GmbH, S. 1128-1134 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Residence times in fluidized bed granulation
In: Abstracts and proceedings // WCPT6-2010, World Congress on Particle Technology. - Nürnberg, insges. 4 S. ; Kongress: WCPT; 6 (Nürnberg) : 2010.04.26-29[Beitrag auf CD-ROM]

Model-based measurement and control of granulation processes
In: Drying 2010; Vol. A: . - Barleben-Magdeburg : Docupoint GmbH, S. 659-665 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Model-based measurement and control of particulate processes - an application to granulation processes
In: 19th International Congress of Chemical and Process Engineering and 7th European Congress of Chemical Engineering. - Praha, insges. 11 S., 2010 ; Kongress: CHISA 2008; 19 (Praha, Czech Republic) : 2010.08.28-09.01[Beitrag auf CD-ROM]

Model-based measurement of PSDs granulation processes
In: Abstracts and proceedings // WCPT6-2010, World Congress on Particle Technology. - Nürnberg, insges. 4 S. ; Kongress: WCPT; 6 (Nürnberg) : 2010.04.26-29[Beitrag auf CD-ROM]

Application of population balance equations for continuous fluidized bed drying
In: Drying 2010; Vol. A: . - Barleben-Magdeburg : Docupoint GmbH, S. 499-505 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Modelling of fluidized bed drying using population balance equations
In: Abstracts and proceedings // WCPT6-2010, World Congress on Particle Technology. - Nürnberg, insges. 4 S. ; Kongress: WCPT; 6 (Nürnberg) : 2010.04.26-29[Beitrag auf CD-ROM]

Description of particle formation in fluidized beds with a stochastic modelling method
In: Abstracts and proceedings: Nuremberg, Germany, 26 - 29.4.2010 - Nürnberg, 2010 . - 2010, insges. 4 S. ; Kongress: WCPT 6 (Nürnberg : 2010.04.26-29) ; [Beitrag auf CD-ROM]

Stochastic modeling of fluidised bed granulation
In: Drying 2010 Vol. B - Barleben-Magdeburg: Docupoint GmbH, 2010; Vol. B . - 2010, S. 1120-1127 ; Kongress: IDS 17 (Magdeburg : 2010.10.03-06)

Fiber-optical inline measurement of particle size distributions in fluidized bed processes
In: Abstracts and proceedings: Nuremberg, Germany, 26 - 29.4.2010 - Nürnberg, 2010 . - 2010, insges. 4 S. ; Kongress: WCPT 6 (Nürnberg : 2010.04.26-29) ; [Beitrag auf CD-ROM]

Fibre-optical inline measurements of particle size distributions in fluidized bed processes
In: Drying 2010 Vol. A - Barleben-Magdeburg: Docupoint GmbH, 2010; Vol. A . - 2010, S. 672-679 ; Kongress: IDS 17 (Magdeburg : 2010.10.03-06)

Transport phenomena in porous membranes and membrane reactors
In: Membrane reactors: distributing reactants to improve selectivity and yield - Weinheim: Wiley-VCH, S. 85-132, 2010

Packed-bed membrane reactors
In: Membrane reactors - distributing reactants to improve selectivity and yield: distributing reactants to improve selectivity and yield - Weinheim: Wiley-VCH, 2010 . - 2010, S. 133-164

Dynamic behaviour of particle-size distribution in fluidsed bed granulation
In: Abstracts and proceedings // WCPT6-2010, World Congress on Particle Technology. - Nürnberg, insges. 4 S. ; Kongress: WCPT; 6 (Nürnberg) : 2010.04.26-29[Beitrag auf CD-ROM]

Investigation of process dynamics in fluidiized bed granulation
In: Drying 2010; Vol. A: . - Barleben-Magdeburg : Docupoint GmbH, S. 666-671 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

DEM medeling of solids transport in mixed-flow dryers
In: Abstracts and proceedings // WCPT6-2010, World Congress on Particle Technology. - Nürnberg, insges. 4 S. ; Kongress: WCPT; 6 (Nürnberg) : 2010.04.26-29[Beitrag auf CD-ROM]

An irregular pore network model for convective drying of aggregates - capillary and micro-mechanical effects
In: Drying 2010 ; Vol. A. - Barleben-Magdeburg : Docupoint GmbH, S. 132-140 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Micro-scale model for drying of highly porous particle aggregates
In: Drying 2010; Vol. A: . - Barleben-Magdeburg : Docupoint GmbH, S. 407-414 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Modeling of membrane reactors
In: Membrane reactors. - Weinheim : Wiley-VCH, S. 29-62, 2010

Moisture content and residence time distributions in mixed-flow grain dryers
In: Drying 2010; Vol. C: . - Barleben-Magdeburg : Docupoint GmbH, S. 1995-2002 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Modeling of particle formation from a single droplet containing micro or nano particles
In: Drying 2010; Vol. B: . - Barleben-Magdeburg : Docupoint GmbH, S. 1172-1177 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Kinetics of particle formation in fluidized beds - modelling approaches and experimental methods
In: Abstracts and proceedings // WCPT6-2010, World Congress on Particle Technology. - Nürnberg, insges. 4 S. ; Kongress: WCPT; 6 (Nürnberg) : 2010.04.26-29[Beitrag auf CD-ROM]

Experimental and theoritical investigation of drying effects on fluidized bed wet agglomeration
In: Drying 2010; Vol. A: . - Barleben-Magdeburg : Docupoint GmbH, S. 318-324 ; Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Stochastic modeling of fluidized bed spray drying - effect of particle porosity and bed temperature on agglomeration kinetics
In: Abstracts and proceedings // WCPT6-2010, World Congress on Particle Technology. - Nürnberg, insges. 4 S. ; Kongress: WCPT; 6 (Nürnberg) : 2010.04.26-29[Beitrag auf CD-ROM]

Heat and mass transfer in packed beds with fluid flow
In: VDI heat atlas. - Berlin [u.a.] : Springer-Verlag Berlin Heidelberg, S. 1327-1342, 2010

Heat transfer from a wall to stagnant and mechanically agitated beds
In: VDI heat atlas. - Berlin [u.a.] : Springer-Verlag Berlin Heidelberg, S. 1311-1326, 2010

Thermal conductivity of packed beds
In: VDI heat atlas. - Berlin [u.a.] : Springer-Verlag Berlin Heidelberg, S. 570-580, 2010

Extraction of effective parameters for continuous drying model from discrete pore network model
In: Drying 2010 Vol. A - Barleben-Magdeburg: Docupoint GmbH, 2010; Vol. A . - 2010, S. 415-422 ; Kongress: IDS 17 (Magdeburg : 2010.10.03-06)

Advances in discrete modeling of heat transfer in contact drying equipment
In: Drying 2010 - Barleben-Magdeburg: Docupoint GmbH, S. 325-330 ; Kongress: IDS 17 (Magdeburg : 2010.10.03-06)

Discrete investigation of thermal relaxation in packed beds
In: Proceedings of the 14th International Heat Transfer Conference. - ASME, insges. 6 S., 2010 ; Kongress: IHTC; 14 (Washington, DC, USA) : 2010.08.08-13[Beitrag auf CD-ROM]

Irregular pore networks and mechanical effects during drying of porous media
In: Zugl.: Magdeburg, Univ., Fakultät für Verfahrens- und Systemtechnik, Diss., 2010: [Magdeburg]: Docupoint-Verl., 1. Aufl., XIV, 148 S., graph. Darst., 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; Vol. 1)

Influence of the wall on the heat transfer process in rotary kiln
In: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2010, V, 134 S., Ill., graph. Darst., 30 cm

Drying 2010 Vol. A
In: Barleben-Magdeburg: Docupoint GmbH, 2010; XLI, 706 S.: Ill., graph. Darst. - (Docupoint Wissenschaft) ; Kongress: International Drying Symposium; 17 (Magdeburg) : 2010.10.03-06 ; IDS; 17 (Magdeburg) : 2010.10.03-06

Drying 2010 Vol. B
In: Barleben-Magdeburg: Docupoint GmbH, 2010; XLI S., S. 707 - 1401: Ill., graph. Darst. - (Docupoint Wissenschaft) ; Kongress: International Drying Symposium; 17 (Magdeburg) : 2010.10.03-06 ; IDS; 17 (Magdeburg) : 2010.10.03-06

Drying 2010 Vol. C
In: Barleben-Magdeburg: Docupoint GmbH, 2010; XLI S., S. 1402 - 2338: Ill., graph. Darst. - (Docupoint Wissenschaft) ; Kongress: International Drying Symposium; 17 (Magdeburg) : 2010.10.03-06 ; IDS; 17 (Magdeburg) : 2010.10.03-06

Thermal and flow effects during adsorption in conventional, diluted and annular packed beds
In: Chemical engineering science . - Amsterdam : Elsevier, Bd. 65.2010, 14, S. 4250-4260

Analysis of a fluidized bed membrane reactor for butane partial oxidation to maleic anhydride - 2D modelling
In: Chemical engineering science - journal internat. de génie chimique - Amsterdam: Elsevier, 1951, Bd. 65.2010, 11, S. 3538-3548

Network models for capillary porous media - application to drying technology
In: Chemie - Ingenieur - Technik. - Weinheim : Wiley-VCH Verl, Bd. 82.2010, 6, S. 869-879

Drying simulations of various 3D pore structures by a nonisothermal pore network model
In: Drying technology. - New York, NY [u.a.] : Dekker, Bd. 28.2010, 5, S. 615-623

Empirical macroscopic model for drying of porous media based on pore networks and scaling theory
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, 1983, Bd. 28.2010, 8, S. 991-1000 ; [Special Issue: Mathematical Modeling of Drying]

Moisture migration in stored granular materials
In: Porous media and its applications in science, engineering, and industry. - Melville, NY : American Inst. of Physics, S. 313-318, 2010 - (AIP conference proceedings; 1254) ; Kongress: Internatinal Conference on Porous Media and its Applications in Science, Engineering and Industry; 3 (Montecatini, Italy) : 2010.06.20-25

Modeling of continuous fluidized bed drying using a population balance approach
In: 8th World Congress of Chemical Engineering . - Montreal, insges. 5 S., 2009 ; Kongress: WCCE; 8 (Montreal) : 2009.08.23-27

Determination of agglomeration kinetics in fluidised beds
In: 8th World Congress of Chemical Engineering: 23.-27. August, 2009, Montreal/Canada ; proceedings - Montreal, 2009 . - 2009, insges. 6 S. ; Kongress: WCCE 8 (Montreal : 2009.08.23-27) ; [Beitrag auf USB-Stick]

Pore-scale modeling of drying-induced cracks
In: 8th World Congress of Chemical Engineering : 23.-27. August, 2009, Montreal/Canada ; proceedings. - Montreal, insges. 6 S. ; Kongress: WCCE; 8 (Montreal) : 2009.08.23-27[Beitrag auf USB-Stick]

Towards a micro-scale simulation of convective gel drying
In: XII Polish Drying Symposium . - Lódz, S. 223-234, 2009 ; Kongress: Polish Drying Symposium; 12 (Lódz) : 2009.09.14-16

Influence of the process parameters on particle properties during fluidized bed granulation
In: 9th International Symposium on Agglomeration and 4th International Granulation Workshop . - Sheffield, insges. 14 S., 2009 ; Kongress: International Symposium on Agglomeration; 9 (Sheffield) : 2009.06.22-26

Modeling of particle growth in fluidized bed spray agglomeration
In: 8th World Congress of Chemical Engineering . - Montreal, insges. 6 S., 2009 ; Kongress: WCCE; 8 (Montreal) : 2009.08.23-27

Modelling of agglomerate formation in fluidized bed spray drying
In: 9th International Symposium on Agglomeration and 4th International Granulation Workshop . - Sheffield, insges. 16 S., 2009 ; Kongress: International Symposium on Agglomeration; 9 (Sheffield) : 2009.06.22-26

Models and tools for product engineering by drying
In: XII Polish Drying Symposium . - Lódz, S. 88-104, 2009 ; Kongress: Polish Drying Symposium; 12 (Lódz) : 2009.09.14-16

Particle formulation by drying
In: 8th World Congress of Chemical Engineering . - Montreal, insges. 6 S., 2009 ; Kongress: WCCE; 8 (Montreal) : 2009.08.23-27

Measuring techniques for particle formulation processes
In: Modern drying technology; Vol. 2: Experimental techniques . - Weinheim : Wiley-VCH, ISBN 978-3-527-31557-4, S. 187-278, 2009

Particle velocity profiles and residence time distribution in mixed-flow grain dryers
In: Conference proceedings // 6th Int. Conf. for Conveying and Handling of Particulate Solids (CHoPS). - Barton : Engineers Australia, S. 79-84, 2009 ; Kongress: CHoPS; 6 (Brisbane) : 2009.08.03-07

Discrete and continuous models to describe the kinetics of particle formation in fluidized beds
In: Proceedings of the 4th Nordic Drying Conference, NDC 2009 . - SINTEF, ISBN 978-82-594-3406-7, insges. 8 S. ; Kongress: Nordic Drying Conference; 4 (Reykjavik) : 2009.06.17-19

Measurement of average moisture content and drying kinetics for single particles, droplets and dryers
In: Modern drying technology; Vol. 2: Experimental techniques . - Weinheim : Wiley-VCH, ISBN 978-3-527-31557-4, S. 1-71, 2009

Modeling of continuous fluidized bed drying using a population balance approach
In: Proceedings of the 4th Nordic Drying Conference, NDC 2009 . - SINTEF, ISBN 978-82-594-3406-7, insges. 9 S. ; Kongress: Nordic Drying Conference; 4 (Reykjavik) : 2009.06.17-19

Experimental investigation of temperature distributions in bulk materials
In: World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics <7, 2009, Krakow>: 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics . - Krakow : AGH Univ. of Science and Technology press, ISBN 978-83-7464-235-4, S. 2039-2046 ; Kongress: ExHFT; 7 (Krakow) : 2009.06.28-07.03

Modern drying technology. Vol. 2: Experimental techniques
In: Weinheim: Wiley-VCH, 2009, XXXVII, 374 S., Ill., graph. Darst. ; [Literaturangaben]

Mass transport in multilayer porous metallic membranes - diagnosis, identification and validation
In: Chemical engineering &amp;amp; technology: industrial chemistry, plant equipment, process engineering, biotechnology / Gesellschaft Deutscher Chemiker ; Deutsche Gesellschaft für Chemisches Apparatewesen, Chemische Technik und Biotechnologie, DECHEMA ; VDI-Gesellschaft Verfahrenstechnik und Chemieingenieurwesen, GVC: industrial chemistry, plant equipment, process engineering, biotechnology - Weinheim: Wiley-VCH, 1987, Bd. 32.2009, 4, S. 632-640

Effect of top layeràs material and flow direction on mass transfer through multi-layer ceramic membranes
In: Canadian journal of pure and applied sciences . - Burnaby, British Columbia : SENRA, Academic Publishers, Bd. 3.2009, 3, S. 993-1000

General analysis of isobaric diffusion in composite ceramic membranes with inclusion of axial dispersion coefficient
In: Journal of porous media . - New York, NY : Dekker, Bd. 12.2009, 10, S. 955-966

Influence of the multilayer nature of a composite membrane on mass transfer
In: Journal of porous media . - New York, NY : Dekker, Bd. 12.2009, 8, S. 749-757

Influence of volumetric flow rate and temperature on mass transfer in composite ceramic membranes for membrane reactors
In: Canadian journal of pure and applied sciences . - Burnaby, British Columbia : SENRA, Academic Publishers, Bd. 3.2009, 1, S. 741-749

A non-isothermal pore network drying model with gravity effect
In: Transport in porous media . - Dordrecht [u.a.] : Springer, Bd. 80.2009, 3, S. 431-439

Stochastic simulation of agglomerate formation in fluidized bed spray drying - a micro-scale approach
In: Chemical engineering science . - Amsterdam : Elsevier, Bd. 64.2009, 11, S. 2631-2643

Modelling of continuous fluidized bed drying using a population balance approach
In: Drying 2008; Vol. A: . - Mumbai : Department of Chemical Engineering, Institute of Chemical Technology, University of Mumbai, ISBN 81-9073710-4, S. 456-462 ; Kongress: IDS 2008; 16 (Hyderabad, India) : 2008.11.09-12

Study of fluidized bed spray agglomeration fucussing the moisture content of the solid
In: Drying 2008; Vol. B: . - Mumbai : Department of Chemical Engineering, Institute of Chemical Technology, University of Mumbai, ISBN 81-9073711-2, S. 1052-1059 ; Kongress: IDS 2008; 16 (Hyderabad, India) : 2008.11.09-12

Mechanical effects during isothermal drying - a new discrete modelling approach
In: Drying 2008 ; Vol. A. - Mumbai : Department of Chemical Engineering, Institute of Chemical Technology, University of Mumbai, S. 440-448 ; Kongress: IDS 2008; 16 (Hyderabad, India) : 2008.11.09-12

A note on sectional and finite volume methods for solving population balance equations
In: Micro-macro-interactions . - Berlin [u.a.] : Springer, ISBN 978-3-540-85714-3, S. 285-297

Pore network models for drying
In: Tret\"ja Mezdunarodnaja Naucno-prakticeskaja Konferencija \"Sovremennye Energosberegajuscie Teplovye Technologii (suska i termovlaznostnaja obrabotka materialov) SETT-2008\"; Tom 1: . - MGUPB, S. 56-62 ; Kongress: DHTP 2008; 3 (Moscow) : 2008.09.16-20

Pore-sale modelling of transport phenomena in drying
In: Micro-macro-interactions . - Berlin [u.a.] : Springer, ISBN 978-3-540-85714-3, S. 187-204

Use of pore networks for macroscopic modelling of drying
In: Drying 2008 ; Vol. A - Mumbai: Department of Chemical Engineering, Institute of Chemical Technology, University of Mumbai, 2008; Vol. A . - 2008, S. 242-249 ; Kongress: IDS 2008 16 (Hyderabad, India : 2008.11.09-12)

Drying simulations of various 3d pore structures by a non-isothermal pore network model
In: Drying 2008 ; Vol. A - Mumbai: Department of Chemical Engineering, Institute of Chemical Technology, University of Mumbai, 2008; Vol. A . - 2008, S. 356-364 ; Kongress: IDS 2008 16 (Hyderabad, India : 2008.11.09-12)

Monte-Carlo simulation of agglomerate growth in fluidized bed spray drying
In: Drying 2008; Vol. A: . - Mumbai : Department of Chemical Engineering, Institute of Chemical Technology, University of Mumbai, ISBN 81-9073710-4, S. 493-500 ; Kongress: IDS 2008; 16 (Hyderabad, India) : 2008.11.09-12

Predigt beim Akademischen Gottesdienst am 30. Juni 2002 in der Wallonerkirche zu Magdeburg
In: Predigten der Magdeburger Akademischen Gottesdienste 2001 bis 2007 . - Magdeburg : Univ., Evangel. Hochschulpfarramt, S. 57-64, 2008

Transient natural convection and heat transfer during the storage of granular media
In: International journal of heat and mass transfer . - Amsterdam [u.a.] : Elsevier, Bd. 51.2008, 13/14, S. 3468-3477

Analysis of single and multi-stage membrane reactors for the oxidation of short-chain alkanes: simulation study and pilot scale experiments
In: Transactions of the Institution of Chemical Engineers / A/ Institution of Chemical Engineers - Amsterdam: Elsevier, 1983, Bd. 86.2008, 7, S. 753-764

Viscous stabilization of drying front - three-dimensional pore network simulations
In: Chemical engineering research and design . - Amsterdam : Elsevier, Bd. 86.2008, 7, S. 739-744

On the applicability of normalization for drying kinetics
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, 1983, Bd. 26.2008, 1, S. 90-96

Consideration of heat transfer in pore network modelling of convective drying
In: International journal of heat and mass transfer . - Amsterdam [u.a.] : Elsevier, Bd. 51.2008, 9/10, S. 2506-2518

Influence of heating mode on drying behavior of capillary porous media - pore scale modeling
In: Chemical engineering science . - Amsterdam : Elsevier, Bd. 63.2008, 21, S. 5218-5228

Transient natural convection in stored granular media
In: Conference CD: EFCE event number 669 ; Copenhagen, 16 - 20 September 2007 - Lyngby: Techn. Univ. of Denmark, Dep. of Chemical Engineering, 2007 . - 2007, insges. 13 S. ; Kongress: ECCE 6 (Copenhagen : 2007.09.16-21) ; [Beitrag auf CD-ROM, No. 848]

Experimental and model based analysis of single und multi stage membrane reactors for the oxidation of short-chain hydrocarbons in a pilot scale
In: Conference CD: EFCE event number 669 ; Copenhagen, 16 - 20 September 2007 - Lyngby: Techn. Univ. of Denmark, Dep. of Chemical Engineering, 2007 . - 2007, insges. 29 S. ; Kongress: ECCE 6 (Copenhagen : 2007.09.16-21) ; [Beitrag auf CD-ROM, No. 3386]

Simulation study of membrane supported oxidation of methane with simultaneous steam reforming using O2-selective perowskite hollow fibres
In: Conference CD: EFCE event number 669 ; Copenhagen, 16 - 20 September 2007 - Lyngby: Techn. Univ. of Denmark, Dep. of Chemical Engineering, 2007 . - 2007, insges. 7 S. ; Kongress: ECCE 6 (Copenhagen : 2007.09.16-21) ; [Beitrag auf CD-ROM, No. 3412]

Numerical methods on population balances
In: Modern drying technology Vol. 1: Computational tools at different scales - Weinheim: Wiley-VCH, 2007 . - 2007, S. 209-260

Pore-network models - a powerful tool to study drying at the pore level and understand the influence of structure on drying kinetics
In: Modern drying technology Vol. 1: Computational tools at different scales - Weinheim: Wiley-VCH, 2007 . - 2007, S. 57-102

Viscous stabilization of drying front - three-dimensional pore network simulations
In: Conference CD // European Congress of Chemical Engineering - 6. - Lyngby : Techn. Univ. of Denmark, Dep. of Chemical Engineering, insges. 7 S., 2007 ; Kongress: ECCE; 6 (Copenhagen) : 2007.09.16-21[Beitrag auf CD-ROM, No. 1925]

A population balance approach for continuous fluidized bed dryers
In: Conference CD // European Congress of Chemical Engineering - 6 . - Lyngby : Techn. Univ. of Denmark, Dep. of Chemical Engineering, insges. 29 S., 2007 ; Kongress: ECCE; 6 (Copenhagen) : 2007.09.16-21

Drying kinetics of granular nylon-6
In: Conference CD: EFCE event number 669 ; Copenhagen, 16 - 20 September 2007 - Lyngby: Techn. Univ. of Denmark, Dep. of Chemical Engineering, 2007 . - 2007, insges. 4 S. ; Kongress: ECCE 6 (Copenhagen : 2007.09.16-21) ; [Beitrag auf CD-ROM, No. 1937]

A non-isothermal pore network drying model - influence of gravity
In: Conference CD: EFCE event number 669 ; Copenhagen, 16 - 20 September 2007 - Lyngby: Techn. Univ. of Denmark, Dep. of Chemical Engineering, 2007 . - 2007, insges. 9 S. ; Kongress: ECCE 6 (Copenhagen : 2007.09.16-21) ; [Beitrag auf CD-ROM, No. 2131]

Packed-bed membrane reactors
In: Modeling of process intensification / ed. by Frerich Johannes Keil - Weinheim: Wiley-VCH, 2007 . - 2007, S. 99-148

Modern drying technology. Vol. 1: Computational tools at different scales
In: Weinheim: Wiley-VCH, 2007, XXXVII, 320 S., Ill., graph. Darst., 25 cm ; [Literaturangaben]

Catalytic membrane reactors for partial oxidation using perovskite hollow fiber membranes and for partial hydrogenation using a catalytic membrane contactor
In: Industrial &amp;amp; engineering chemistry research: I &amp;amp; EC research ; a publication of the American Chemical Society for applied chemistry &amp;amp; chemical engineering - Washington, DC: ACS Publ., 1987, Bd. 46.2007, 8, S. 2286-2294

Perowskit-Hohlfasermembranen für die katalytische Partialoxidation von Methan zu Synthesegas
In: Chemie - Ingenieur - Technik: Verfahrenstechnik, technische Chemie, Apparatewesen, Biotechnologie / Hrsg.: Gesellschaft Deutscher Chemiker, Dechema, Gesellschaft für Chemische Technik und Biotechnologie, VDI-GVC-Gesellschaft Verfahrenstechnik und Chemieingenieurwesen: Verfahrenstechnik, technische Chemie, Apparatewesen, Biotechnologie - Weinheim: Wiley-VCH Verl., 1949, Bd. 79.2007, 6, S. 831-842

Continuous versus discrete modelling of heat transfer to agitated beds
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 179.2007, S. 140-151

Influence of pore structure on drying kinetics - a pore network study
In: AIChE journal: an official publication of the American Institute of Chemical Engineers ; chemical engineering research and development/ American Institute of Chemical Engineers - Hoboken, NJ: Wiley-Blackwell, 1955, Bd. 53.2007, 12, S. 3029-3041

Isothermal drying of pore networks - influence of fiction for different pore structures
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, 1983, Bd. 25.2007, S. 49-57

Towards a complete population balance model for fluidized-bed spray agglomeration
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, 1983, Bd. 25.2007, 7/8, S. 1321-1329

Modeling of contact dryers
In: Drying technology: an international journal - New York, NY [u.a.]: Dekker, 1983, Bd. 25.2007, 7/8, S. 1377-1391

Ein analytisches populationsbilanzmodell für die kontinuierliche Wirbelschichttrocknung
In: Vestnik Tambovskogo Gosudarstvennogo Technieskogo Universiteta: etyrech\"jazynyj nauno-teoretieskij i prikladnoj urnal irokogo profilja/ Tambovskij Gosudarstvennyj Techničeskij Universitet - Tambov: Izdat. TGTU, 2002, Bd. 13.2007, 2, S. 4774-489

Isothermal drying of pore networks - influence of friction for different pore structures
In: Drying 2006 - Gödöllő: Univ., S. 169-176 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

Distributed product quality in fluidized bed drying
In: Drying 2006 - Gödöllő: Univ., S. 745-750 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

A population balance model for simulationeous drying and agglomeration
In: Drying 2006 - Gödöllő: Univ., S. 219-226 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

Modelling of microwave aided desorption process within ceramic foams
In: Drying 2006 - Gödöllő: Univ., S. 219-226 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

Drying kinetics of granular and powdery polymers
In: Drying 2006 - Gödöllő: Univ., S. 1867-1874 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

Towards a complete pore network drying model - first steps to include heat transfer
In: Drying 2006 - Gödöllő: Univ., S. 125-132 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

Modeling of contact dryers
In: Drying 2006 - Gödöllő: Univ., S. 29-43 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

Wärmeleitfähigkeit von Schüttschichten
In: VDI-Wärmeatlas: [Berechnungsunterlagen für Druckverlust, Wärme- und Stoffübergang] - Berlin [u.a.]: Springer, 2006, S. Dee 1 - Dee 9

Wärmeleitung und Dispersion in durchströmten Schüttungen
In: Verein Deutscher Ingenieure : VDI-Wärmeatlas . - Berlin [u.a.] : Springer, ISBN 3-540-25503-6, S. 1-15, 2006

Wärmeübergang von einer Heizfläche an ruhende oder mechanisch durchmischte Schüttungen
In: VDI-Wärmeatlas: [Berechnungsunterlagen für Druckverlust, Wärme- und Stoffübergang] - Berlin [u.a.]: Springer, 2006, S. Mg 1 - Mg 16

Influence of pore size distribution via effective parameters in continuous drying model
In: Drying 2006 - Gödöllő: Univ., S. 554-560 ; Kongress: International Drying Symposium 15 (Budapest, Hungary : 2006.08.20-23

Towards a complete population balance model for fluidized bed spray granulation - simultaneous drying and particle formation
In: Glatt international times - Binzen: Glatt International, 22, S. 7-13, 2006

Drying in fluidized beds with immersed heating elements
In: Chemical engineering science: journal internat. de génie chimique - Amsterdam: Elsevier, Bd. 62.2007, 1/2, S. 481-502, 2006

Heat and mass transfer in tubular ceramic membranes for membrane reactors
In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Bd. 49.2006, 13/14, S. 2239-2253

Mixing of particles in rotary drums - a comparison of discrete element simulations with experimental results and penetration models for thermal processes
In: Powder technology: an international journal on the science and technology of wet and dry particulate systems - Amsterdam [u.a.]: Elsevier Science, Bd. 161.2006, 1, S. 69-78

Characterization of particulate materials in respect to drying
In: Drying technology: an international journal - Philadelphia, Pa: Taylor &amp;amp; Francis, Bd. 24.2006, 9, S. 1083-1092

Modern modelling methods in drying
In: Transport in porous media: TIPM - Dordrecht [u.a.]: Springer, Bd. 66.2007, 1/2, S. 103-120, 2006

Remarks on the paper "extension of Hoshen-Kopelman algorithm to non-lattice environments" by A. Al-Futaisi and T. W. Patzek, Physica A 321 (2003) 665-678
In: Physica / A - Amsterdam: North Holland Publ. Co, 1975, Bd. 363.2006, 2, S. 558-560

A generic population balance model for simultaneous agglomeration and drying in fluidized beds
In: Chemical engineering science: journal internat. de génie chimique - Amsterdam: Elsevier, Bd. 62.2007, 1/2, S. 513-532, 2006

An improved discretized tracer mass distribution of Hounslow et al.
In: AIChE journal - Hoboken, NJ: Wiley, Bd. 52.2006, 4, S. 1326-1332

Distributed product quality by the example of moisture content of granular materials in a continuous fluidized bed dryer
In: Fifth World Congress on Particle Technology: WCPT 5 - New Yirk, NY: American Institute of Chemical Engineers, S. 1-10, insges. 10 S., 2006 - (P; AIChE, American Institute of Chemical Engineers; 227) ; Kongress: Spring national meeting. American Institute of Chemical Engineers (AIChE) (Orlando, Fla. : 2006.04.23-27 ; [Beitrag auf CD-ROM; Paper no. 163f]

Numerical solutions of a two-dimensional population balance equation for aggregation
In: Fifth World Congress on Particle Technology: WCPT 5 - New Yirk, NY: American Institute of Chemical Engineers, S. 1-10, insges. 10 S., 2006 - (P; AIChE, American Institute of Chemical Engineers; 227) ; Kongress: Spring national meeting. American Institute of Chemical Engineers (AIChE) (Orlando, Fla. : 2006.04.23-27 ; [Beitrag auf CD-ROM; Paper no. 155c]

Discrete modelling of contact heating of particles in rotating drum
In: World Congress on Particle Technology <5, 2006, Orlando, Fla.> : Conference proceedings, 06 AIChE spring national meeting, Orlando, FL; Vol. 2: Fifth World Congress on Particle Technology . - New Yirk, NY : American Institute of Chemical Engineers, S. 1-11, insges. 11 S.; P / AIChE, American Institute of Chemical Engineers; 227 ; Kongress: Spring national meeting. American Institute of Chemical Engineers (AIChE); (Orlando, Fla.) : 2006.04.23-27

Pore network modelling of drying : combination with a boundary layer model to capture the first drying period.
In: IChemE (Veranst.): Chemical Engineering (7th world congress, Glasgow/Scotland 10.- 14.07.2005). - proceedings. Rugby, 2005, 10 S., Paper-Nr. P42-033

On the way from penetration models to diskrete elementsimulations of contact dryers.
In: 11th Polish drying symposium, XI PSS (Poznan, Poland 13-16 September 2005). - proceedings. Poznan, 2005, 10 S., [Elektronische Ressource]

Characterization of particulate materials in respect to drying, desorption or adsorption in packed bed.
In: 11th Polish drying symposium, XI PSS (Poznan, Poland 13-16 September 2005). - proceedings. Poznan, 2005, 11 S., [Elektronische Ressource]

Magnetic resonance imaging to monitor moisture profiles in a drying nano-porous sphere.
In: IChemE (Veranst.): Chemical Engineering (7th world congress, Glasgow/Scotland 10.- 14.07.2005). - proceedings. Rugby, 2005, 10 S., Paper-Nr. C14-004

New modelling and measuring methods in drying science and technology.
In: 11th Polish drying symposium, XI PSS (Poznan, Poland 13-16 September 2005). - proceedings. Poznan, 2005, 18 S., [Elektronische Ressource]

Simulation of the steady state behavior of granulation, agglomeration and drying units in a flowsheet simulation program.
In: Eikevik, Trygve M. (Hrsg.) ; Alves-Filho, Odilio (Hrsg.) ; Strommen, Ingvald (Hrsg.): Nordic drying (3rd Conference Karlstad, Sweden June 15th to 17th 2005). - proceedings. Karlstad : Univ., 2005, [Elektronische Ressource] (NDC 2005)

Discrete modeling of drying kinetics of porous media.
In: Eikevik, Trygve M. (Hrsg.) ; Alves-Filho, Odilio (Hrsg.) ; Strommen, Ingvald (Hrsg.): Nordic drying (3rd Conference Karlstad, Sweden June 15th to 17th 2005). - proceedings. Karlstad : Univ., 2005, [Elektronische Ressource] (NDC 2005)

An analysis of mixing in rotary drums by means of discrete element method and penetration model.
In: Garcia-Rojo, R. (Hrsg.) ; Hermann, H. J. (Hrsg.) ; McNamara, S. (Hrsg.): Powders and grains, 2005 (Stuttgart, Germany 18th - 22nd July 2005). - Vol. 1. London : Taylor &amp;amp; Francis Group, 2005, S. 837 - 840

Modelling fluidized bed drying.
In: Eikevik, Trygve M. (Hrsg.) ; Alves-Filho, Odilio (Hrsg.) ; Strommen, Ingvald (Hrsg.): Nordic drying (3rd Conference Karlstad, Sweden June 15th to 17th 2005). - proceedings. Karlstad : Univ., 2005, [Elektronische Ressource] (NDC 2005)

Influence of pore size distribution on drying kinetics : a simple capillary model.
In: Drying technology [New York] 23(2005), Nr. 9-11, S. 1797 - 1809

Interfacial convection during evaporation of binary mixtures from porous obstacles.
In: AIChE journal [New York, NY] 51(2005), Nr. 12, S. 3257 - 3274

Tomographic measurement of breakthrough in a packed bed adsorber.
In: Chemical engineering science [Amsterdam] 60(2005), S. 517 - 522

Model-based analysis of convective grain drying processes.
In: Drying technology [New York] 23(2005), Nr. 9-11, S. 1895 - 1908

Heat transfer in tubular, inorganic membranes.
In: European Committee for the Advancement of Thermal Sciences and Heat Transfer (Veranst.): Thermal sciences (4th European conference Birmingham, UK 29th - 31st March 2004, incorporating the 5th Industrial heat exchange engineering conference). - conference pack, proceedings. Birmingham, UK, 2004, Beitrag auf CD-ROM, [Elektronische Ressource]

Determination of kinetics and equilibria for drying or adsorption on single particles by a magnetic suspension balance.
In: European Committee for the Advancement of Thermal Sciences and Heat Transfer (Veranst.): Thermal sciences (4th European conference Birmingham, UK 29th - 31st March 2004, incorporating the 5th Industrial heat exchange engineering conference). - conference pack, proceedings. Birmingham, UK, 2004, [10 S.] [Beitrag auf CD-ROM]

Analysis of tubular packed-bed membrane based on non-isothermal 2D-reactor models.
In: From molecular to product and process engineering, ISCRE 18 (The 18th international symposium on chemical reaction engineering Chicago, Illinois, USA June 6-9, 2004). Chicago, 2004, [2 S.]

Determination of kinetics and equilibria for adsorption of water vapor on single zeolite particles by a magnetic suspension.
In: Chemical engineering &amp;amp; technology [Weinheim] 27(2004), Nr. 6, S. 681 - 686

Modeling of the wall effect in packed bed adsorption.
In: Chemical engineering &amp;amp; technology [Weinheim] 27(2004), Nr. 11, S. 1179 - 1186

Modeling and numerical analysis of an atypical convective coal drying process.
In: Drying technology [New York] 22(2004), Nr. 10, S. 2351 - 2373

Einfluss einer Gas-Flüssig-Grenzfläche auf die Waschkinetik poröser Stoffe bei Mischbarkeit von Beladungs- und Waschflüssigkeit.
In: Vestnik Tambovskogo gosudarstvennogo techniceskogo universiteta = Transactions of the Tambov Technical University [Tambov] 10(2004), Nr. 1A, S. 101 - 113

Modellierung der Sensitivität von Vermischung und Trocknung in Gas/Feststoff- Wirbelschichten.
In: Chemie - Ingenieur - Technik [Weinheim] 76(2004), Nr. 9, S. 1363 - 1364

Experimental determination of single-particle kinetics and equilibria for convective drying, desorption or adsorption by a magnetic suspension balance.
In: Drying 2004 (14th International drying symposium Sao Paulo, Brazil, 22-25 August 2004). - proceedings. Vol. B. Campinas-SP : DTF/FEQ/Unicamp, 2004, S. 1419 - 1426 (IDS 2004)

Influence of pore size distribution on drying kinetics : a simple capillary model.
In: Drying 2004 (14th International drying symposium Sao Paulo, Brazil, 22-25 August 2004). - proceedings. Vol. A. Campinas-SP : DTF/FEQ/Unicamp, 2004, S. 185 - 192 (IDS 2004)

Fluidized bed drying : influence of dispersion and transport phenomena.
In: Drying 2004 (14th International drying symposium Sao Paulo, Brazil, 22-25 August 2004). - proceedings. Vol. A. Campinas-SP : DTF/FEQ/Unicamp, 2004, S. 129 - 136 (IDS 2004)

Tomographic investigation of the influence of wall effects on the breakthrough in a highly loaded packed bed adsorber.
In: American Institute of Chemical Engineers (Veranst.): 2004 annual meeting of the American Institute of Chemical Engineers (AIChE 2004 annual meeting Austin, Texas. November 7 - 12, 2004). - proceedings. New York : AIChE, 2004, [9 S.] [Electronische Ressource] (Annual meeting of the AIChE 2004)

Model-based analysis and optimization of convective grain drying processes.
In: Drying 2004 (14th International drying symposium Sao Paulo, Brazil, 22-25 August 2004). - proceedings. Vol. A. Campinas-SP : DTF/FEQ/Unicamp, 2004, S. 381 - 388 (IDS 2004)

Optimization of operational regimes for cross-flow grain dryers.
In: Saravacos, G. D. (Hrsg.) ; ... (Hrsg.): Advances in drying technology, EUDrying 03 (Symposium Heraklion, Crete, September 4-5, 2003). - proceedings. Heraklion, 2003, S. 241 249

Industrial convective drying : a unit operation on the way to process systems and product engineering.
In: Saravacos, G. D. (Hrsg.) ; ... (Hrsg.): Advances in drying technology, EUDrying 03 (Symposium Heraklion, Crete, September 4-5, 2003). - proceedings. Heraklion, 2003, S. 15 - 27

Aspects of describing stagewise dosing of reactans into fixed-bed and membrane reactors using 2D models.
In: European Federation of Chemical Engineering, EFCE (Veranst.): Chemical engineering : a tool for progress, ECCE-4 (4th European congress of chemical engineering Granada, Spain 21 - 25 September 2003). Granada, 2003, [2 S.]. - Beitrag auf CD-ROM

Calculation of product temperature by short-cut tools for convective dryer design.
In: Eikevik, Trygve M. (Hrsg.) ; Alves-Filho, Odilio (Hrsg.) ; Strommen, Ingvald (Hrsg.): 2nd Nordic drying conference (Copenhagen, Denmark, June 25th to 27th 2003). Trondheim : Norwegian Electric Power Research Inst., 2003, paper 78, [9 S.]. - Beitrag auf CD-ROM

Influence of flow maldistribution on packed bed adsorber performance.
In: European Federation of Chemical Engineering, EFCE (Veranst.): Chemical engineering : a tool for progress, ECCE-4 (4th European congress of chemical engineering Granada, Spain 21 - 25 September 2003). Granada, 2003, paper P-5.5-007, [3 S.]. - Beitrag auf CD-ROM

A generic model for investigating the influence of dispersion on fluidised bed evaporation and drying.
In: Eikevik, Trygve M. (Hrsg.) ; Alves-Filho, Odilio (Hrsg.) ; Strommen, Ingvald (Hrsg.): 2nd Nordic drying conference (Copenhagen, Denmark, June 25th to 27th, 2003). Trondheim : NTNU Norwegian University of Science and Technology, 2003, [10 S.]. - Beitrag auf CD-ROM

Numerical and experimental investigation of heat transfer in the wall of membrane reactors.
In: European Federation of Chemical Engineering, EFCE (Veranst.): Chemical engineering : a tool for progress, ECCE-4 (4th European congress of chemical engineering Granada, Spain 21 - 25 September 2003). Granada, 2003, paper O-5.2-004, [4 S.]. - Beitrag auf CD-ROM

Drying of solid materials.
In: Bohnet, Matthias (Hrsg.): Ullmannïs encyclopedia of industrial chemistry. Vol. 11 : Diuretics to energy management in chemical industry. 6., compl. rev. Aufl. Weinheim : Wiley-VCH, 2003, S. 47 - 82

Product quality in drying - luck, trial, experience or science?.
In: Eikevik, Trygve M. (Hrsg.) ; Alves-Filho, Odilio (Hrsg.) ; Strommen, Ingvald (Hrsg.): 2nd Nordic drying conference (Copenhagen, Denmark, June 25th to 27th 2003). Trondheim : Norwegian Electric Power Research Inst., 2003, paper 76, [14 S.]. - Beitrag auf CD-ROM

Enhancement of mass transfer by microconvection.
In: European Federation of Chemical Engineering, EFCE (Veranst.): Chemical engineering : a tool for progress, ECCE-4 (4th European congress of chemical engineering Granada, Spain 21 - 25 September 2003). Granada, 2003, paper P-7.1-013, [3 S.]. - Beitrag auf CD-ROM

Aspects of describing stagewise dosing of reactants into fixed-bed and membrane reactors using 2D models
In: ECCE 4th European Congress of Chemical Engineering – Topic 7, 2003, Seq. No.: P7.2-049

Ein allgemeines Modell zur Untersuchung des Einflusses der Dispersion auf die Trocknung und Verdampfung in Wirbelschichten.
In: Chemie - Ingenieur - Technik [Weinheim] 75(2003), Nr. 8, S. 1112

Moderne Prozess- und Produktgestaltung am Beispiel der Trocknung.
In: Magdeburger Wissenschaftsjournal [Magdeburg] 8(2003), Nr. 1/2, S. 63 - 70

On the predictability of fluidzed bed evaporation and drying : analysis of mixing behaviour and transport phenomena.
In: European Federation of Chemical Engineering (Veranst.): Chemical engineering, a tool for progress, ECCE-4 (4th European congress on chemical engineering Granada, Spain 21 - 25 September 2003). - proceedings. Granada : Inst., 2003, [Elektronische Ressource] (ECCE-4)

Wärmeleitfähigkeit von Schüttschichten.
In: Verein Deutscher Ingenieure (Hrsg.); ... (Hrsg.): VDI-Wärmeatlas : Berechnungsblätter für den Wärmeübergang. 9., überarb. und erw. Aufl. Berlin : Springer, 2002, S. Dee 1 - Dee 9

Wärmeleitung und Dispersion in durchströmten Schüttungen.
In: Verein Deutscher Ingenieure (Hrsg.); ... (Hrsg.): VDI-Wärmeatlas : Berechnungsblätter für den Wärmeübergang. 9., überarb. und erw. Aufl. Berlin : Springer, 2002, Mh1 - Mh15

Wärmeübergang von einer Heizfläche an ruhende oder mechanisch durchmischte Schüttungen.
In: Verein Deutscher Ingenieure (Hrsg.); ... (Hrsg.): VDI-Wärmeatlas : Berechnungsblätter für den Wärmeübergang. 9., überarb. und erw. Aufl. Berlin : Springer, 2002, Mg1 - Mg16

Experimental investigation and modelling of continuous fluidized bed drying under steady- state and dynamic conditions.
In: Chemical engineering science [London] 57(2002), S. 5021 - 5038

Determination of single-particle drying kinetics in am acoustic levitator.
In: Chemical engineering journal [Amsterdam] 86(2002), S. 217 - 222

Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams.
In: Experimental thermal and fluid science [New York, NY] 26(2002), S. 291 - 297

Combined convective and contact drying in fluidized beds.
In: Cao, C. W. (Hrsg.) ; ... (Hrsg.): Drying 2002 (13th international drying symposium Beijing, China, 27-30 August 2002). - proceedings. Vol. A. Beijing : Chemical Industry Press, 2002, S. 524 - 531 (IDS 2002)

Miscible displacement and diffusion during the removal of undesired liquids from porous bodies by washing.
In: DECHEMA (Veranst.) ; European Federation of Chemical Engineering (Veranst.): ECCE-3 (3rd European congress on chemical engineering Nuremberg 26 - 28 June 2001). - proceedings. Frankfurt am Main, 2001, paper 436, [7 S.]. - Beitrag auf CD-ROM

Removal of ammonia from single water drops at normal or reduced pressure.
In: DECHEMA (Veranst.) ; European Federation of Chemical Engineering (Veranst.): ECCE-3 (3rd European congress on chemical engineering Nuremberg 26 - 28 June 2001). - proceedings. Frankfurt am Main, 2001, paper 459, [8 S.]. - Beitrag auf CD-ROM

Microconvection during pervaporation of a binary liquid mixture from planar gaps or packed layers.
In: DECHEMA (Veranst.) ; European Federation of Chemical Engineering (Veranst.): ECCE-3 (3rd European congress on chemical engineering Nuremberg 26 - 28 June 2001). - proceedings. Frankfurt am Main, 2001, paper 446, [7 S.]. - Beitrag auf CD-ROM

Experimental investigation of heat transfer from a cylinder to fluidized particles with a latent heat sink.
In: Celata, Gian Piero (Hrsg.) ; ... (Hrsg.): Experimental heat transfer, fluid mechanics, and thermodynamics 2001 (Fifth world conference on experimental heat transfer, fluid mechanics, and thermodynamics Thessaloniki, Greece, 24-28 September, 2001). - proceedings. Vol.3. Pisa : Ed.ETS, 2001, S. 1717 - 1722

Formation of fouling layers and efficient energy recovery from dryer exhaust gases.
In: Alves-Filho, Odilio (Hrsg.) ; Eikevik, Trygve M. (Hrsg.) ; Strommen, Ingvald (Hrsg.): 1st Nordic drying conference (Trondheim, Norway, June 27th to 29th 2001). Trondheim : Norwegian Electric Power Research Inst., 2001, paper 16, [9 S.]. - Beitrag auf CD-ROM

Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams.
In: Celata, Gian Piero (Hrsg.) ; ... (Hrsg.): Experimental heat transfer, fluid mechanics, and thermodynamics 2001 (Fifth world conference on experimental heat transfer, fluid mechanics, and thermodynamics Thessaloniki, Greece, 24-28 September, 2001). - proceedings. Vol.1. Pisa : Ed.ETS, 2001, S. 777 - 782

On the predictability of silo rain : modelling moisture migration in beds of particulates after drying.
In: Alves-Filho, Odilio (Hrsg.) ; Eikevik, Trygve M. (Hrsg.) ; Strommen, Ingvald (Hrsg.): 1st Nordic drying conference (Trondheim, Norway, June 27th to 29th 2001). Trondheim : Norwegian Electric Power Research Inst., 2001, paper 15, [8]. - Beitrag auf CD-ROM

Experimental investigation and modeling of the influence of indirect heating on fluidized bed drying.
In: Drying technology [New York] 19(2001), Nr. 8, S. 1739 - 1754

Methods for processing experimental drying kinetics data.
In: Drying technology [New York] 9(2001), Nr. 1, S. 15 - 34

Untersuchung der Kinetik von Trennprozessen im akustischen Levitator: Vor- und Nachteile.
In: Chemie - Ingenieur - Technik [Weinheim] 73(2001), Nr. 8, S. 1012 - 1017

Analyse und Quantifizierung von während und aufgrund der Stoffübertragung eines binären Gemisches durch senkrechte Spalte induzierter Grenzflächenkonvektion.
In: Chemie - Ingenieur - Technik [Weinheim] 73(2001), Nr. 10, S. 1310 - 1314

Thermal effects during the desorption of ammonia from single drops.
In: Hahne, E. W. P. (Hrsg.) ; ... (Hrsg.): EUROTHERM (3rd European thermal sciences conference 2000, Heidelberg, Germany, 10 - 13 September 2000). - proceedings. vol. 2. Pisa : Edizioni ETS, 2000, S. 1217 - 1222

Combined heat transfer, mass transfer and interface convection during evaportation of binary mixtures from planar gaps.
In: Hahne, E. W. P. (Hrsg.) ; ... (Hrsg.): EUROTHERM (3rd European thermal sciences conference 2000, Heidelberg, Germany, 10 - 13 September 2000). - proceedings. vol.2. Pisa : Edizioni ETS, 2000, S. 911 - 916

Heat transfer from a wall to granular products.
In: Hewitt, G. F. (Hrsg.): Heat exchanger design handbook. update 2000. New York : Begell House, 2000, Kap. 2.8.3, S. 2.8.3-1 - 2.8.3-7

Packed beds with fluid flow.
In: Hewitt, G. F. (Hrsg.): Heat exchanger design handbook. update 2000. New York : Begell House, 2000, Kap. 2.8.2, S. 2.8.2-1 - 2.8.2-17

Stagnant packed beds.
In: Hewitt, G. F. (Hrsg.): Heat exchanger design handbook. update 2000. New York : Begell House, 2000, Kapitel 2.8.1, S. 2.8.1-1 - 2.8.1-13

Comparison of convective drying kinetics of active and inactivated Al2O3.
In: Bulletin of the Polisch Academy of Science : Technical science [Varsovie] 48(2000), Nr. 3, S. 369 - 382

A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes filled with spheres.
In: Chemical engineering science [London] 55(2000), S. 967 - 979

Impact of tube-to-particle-diameter ratio on pressure drop in packed beds.
In: AIChE journal [New York, NY] 46(2000), Nr. 5, S. 1084 - 1088

Modelling of heat transport in beds packed with spherical particles for various bed geometries and/or thermal boundary conditions.
In: International journal of thermal science [Paris] 39(2000), S. 556 - 570

Correlations for effective heat transport coefficients in beds packed with cylindrical particles.
In: Chemical engineering science [London] 55(2000), S. 5937 - 5943

Waschen poröser Körper bei Mischbarkeit zwischen Beladungs- und Waschflüssigkeit.
In: Chemie - Ingenieur - Technik [Weinheim] 72(2000), Nr. 9, S. 1096 - 1097

Ein neues, schnelles Meßverfahren für Sorptionsisothermen - Anwendung auf Aktivtonerde.
In: Chemie - Ingenieur - Technik [Weinheim] 72(2000), Nr. 1/2, S. 88 - 94

Akustischer Levitator als Instrument zur Untersuchung kinetisch kontrollierter Trennprozesse an Tropfen oder Partikeln.
In: Chemie - Ingenieur - Technik [Weinheim] 72(2000), Nr. 9, S. 1095

Verbesserung des Stofftransportes durch Mikrokonvektion: Experimenteller Zugang, Quantifizierung und erste Ansätze zur Korrelation.
In: Chemie - Ingenieur - Technik [Weinheim] 72(2000), Nr. 9, S. 1025

Entwicklungsstand und Perspektiven der Modellierung von Transportvorgängen in durchströmten Festbetten.
In: Chemie - Ingenieur - Technik [Weinheim] 72(2000), Nr. 4, S. 313 - 321

Determination of single-particle drying kinetics in an acoustic levitator.
In: Kerkhof, P.J.A.M. (Hrsg.) ; ... (Hrsg.): IDS 2000 (12th international drying symposium, Noordwijkerhout,NL 28-31 August 2000). - proceedings. Amsterdam : Elsevier, 2000, paper 58 [Elektronische Ressource]

Interrelations between porous structure and convective drying kinetics in theory and experiment.
In: Kerkhof, P.J.A.M. (Hrsg.) ; ... (Hrsg.): IDS 2000 (12th International drying symposium, Noordwijkerhout,NL 28-31 August 2000). - proceedings. Amsterdam : Elsevier, 2000, paper 59 [Elektronische Ressource]

Experimental investigation and modelling of the influence of indirect heating on fluidized bed drying.
In: Kerkhof, P.J.A.M. (Hrsg.) ; ... (Hrsg.): IDS 2000 (12th International drying symposium, Noordwijkerhout,NL 28-31 August 2000). - proceedings. Amsterdam : Elsevier, 2000, paper 39 [Elektronische Ressource]

Avoidance of fouling from dryer exhaust gases as a presupposition for efficient energy recovery : an experimental approach.
In: Kerkhof, P.J.A.M. (Hrsg.) ; ... (Hrsg.): IDS 2000 (12th international drying symposium, Noordwijkerhout,NL 28-31 August 2000). - proceedings. Amsterdam : Elsevier, 2000, paper 55 [Elektronische Ressource]

Migration of residual moisture during the storage of particulates after drying.
In: Kerkhof, P.J.A.M. (Hrsg.) ; ... (Hrsg.): IDS 2000 (12th international drying symposium, Noordwijkerhout,NL 28-31 August 2000). - proceedings. Amsterdam : Elsevier, 2000, paper 360 [Elektronische Ressource]

Static and dynamic models for drying in bubbling fluidized beds.
In: Grevillot, G. (Hrsg.) ; ... (Hrsg.) ; Groupe Francais de Genie des Procedes (Veranst.): Fluidisation(I) (3rd European conference on Fluidization, Toulouse, France 29 - 31 May 2000). - proceedings. Nancy : Laboratoire des Sciences du Genie Chimique, 2000, S. 113 - 120 (Recent progres en genie des procedes 14-75)

Heat transfer in packed beds with fluid flow: remarks on the meaning and the calculation of a heat transfer coefficient at the wall
In: Chemical Engineering Science, 1990, S. 819-837, ISSN 00092509, 10.1016/0009-2509(90)85005-X

Thermal conductivity of packed beds: A review
In: Chemical Engineering and Processing: Process Intensification, 1987, S. 19-37, ISSN 02552701, 10.1016/0255-2701(87)80025-9