Publikationen
2026
Begutachteter Zeitschriftenartikel
Assessment of natural gas-hydrogen fuel blends for industrial melting furnaces in secondary aluminium production
Michaelis, Chris; Koslowski, Eugen; Giese, Anne; Schwarz, Christian; Hackert-Oschätzchen, Matthias
In: Materials science forum - Baech : Trans Tech Publications Ltd., Bd. 1188 (2026), S. 11-20
Influence of the crystal structure of AlCrN on tool coating properties and wear in dry gear hobbing
Paucke, Nils; Beutner, Martin; Lümkemann, Andreas; Thomas, Keith; Učík, Martin; Bolvardi, Hamid; Hackert-Oschätzchen, Matthias
In: Defect and diffusion forum - Baech : Trans Tech Publications Ltd., Bd. 450 (2026), S. 61-70
Analysis of connection geometries for segmented stator cores machined with laser beam cutting
Hoffmann, Florian; Plänitz, Philipp; May, Alexander; Winkler, Florian; Barth, Markus; Majcherek, Sören; Hackert-Oschätzchen, Matthias
In: Materials science forum - Baech : Trans Tech Publications Ltd., Bd. 1187 (2026), S. 55-62
Estimation of the lateral gap in PECM - a case study on tool steel S390
Petermann, Richard; Meichsner, Gunnar; Clauß, Pascal; Nickel, Steven; Hackert-Oschätzchen, Matthias
In: Materials science forum - Baech : Trans Tech Publications Ltd., Bd. 1187 (2026), S. 63-73
Classification and detection method for discharges in electrical discharge machining through unsupervised learning
Damm, Philipp; Bederitzky, Oliver; Vogel, Jakob; Riefer, Arthur; Plänitz, Philipp; Lerez, Christoph; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: Solid state phenomena - Baech : Trans Tech Publications Ltd., Bd. 391 (2026), S. 43-53
Modulated pulsed electrochemical machining of tungsten carbide-cobalt - an experimental study according to DIN SPEC 91399
Thielecke, Alexander; Clauß, Pascal; Meichsner, Gunnar; Damm, Philipp; Jungblut, Guido; Schäfer, Markus; Hackert-Oschätzchen, Matthias
In: Solid state phenomena - Baech : Trans Tech Publications Ltd., Bd. 391 (2026), S. 11-20
Condition monitoring model development for belt systems using hybrid CNN–BiLSTM deep-learning techniques
Sahib, Mortda Mohammed; Plänitz, Philipp; Hackert-Oschätzchen, Matthias; Lerez, Christoph
In: Machines - Basel : MDPI, Bd. 14 (2026), Heft 3, Artikel 348, insges. 27 S.
Surface roughness prediction in turning stainless steel applying deep learning and LSTM networks
Lerez, Christoph; Petermann, Richard; Felhö, Csaba; Namboodri, Tanuj; Neu, Alexander; Szűcs, Norbert; Sahib, Mortda Mohammed; Plänitz, Philipp; Hackert-Oschätzchen, Matthias
In: Procedia computer science - Amsterdam [u.a.] : Elsevier, Bd. 277 (2026), S. 159-168
Analysis of user expectations for, formats of and AI-assisted generation of step-by-step instructions for industrial maintenance
Diedrich, Johannes H.; Mahboufar, Reza; Byba, Svitlana; Lerez, Christoph; Hackert-Oschätzchen, Matthias
In: Procedia computer science - Amsterdam [u.a.] : Elsevier, Bd. 277 (2026), S. 1390-1402
Exploring artificial intelligence for tool wear prediction in turn-milling
Lerez, Christoph; Artiushenko, Viktor; Hackert-Oschätzchen, Matthias
In: Defect and diffusion forum - Baech : Trans Tech Publications Ltd., Bd. 450 (2026), S. 1-8
Potential of cutting fluid application in gear hobbing of high-strength materials
Beutner, Martin; Hackert-Oschätzchen, Matthias; Eich, Marco; Karpuschewski, Bernhard
In: Defect and diffusion forum - Baech : Trans Tech Publications Ltd., Bd. 450 (2026), S. 49-59
Nicht begutachteter Zeitschriftenartikel
Künstliche Intelligenz - Anforderungen an KI-Prüfwerkzeuge; Text Englisch
Kaharova, Barno; Komenda, Rico; Holoyad, Taras; Lucieri, Adriano; Pekerman, Robin; Ma, Jackie; Becker, Daniel; Malms, Fabian; Poretschkin, Maximilian; Braun, Christopher; Monke, Helena; Beyer, Paul; Eisl, Dominik; Höhndorf, Lukas; Schmidt, Nico; Hackert-Oschätzchen, Matthias; Plänitz, Philipp; Liebl, Maik; Rabus, Hans; Gautier, Antoine; Kahdan, Manoj; Geschwill, Simon; Felser, Timo; Seyerlein-Klug, Annegrit; Hauer, Marc
In: DIN SPEC 92006:2026-02
Farbliche Markierung technischer Funktionen von Vorrichtungen für das elektrochemische Präzisionsabtragen
Grießbach, Sören; Hackert-Oschätzchen, Matthias; Jungblut, Annegret; Jungblut, Guido; Meichsner, Gunnar; Plänitz, Philipp
In: VDE SPEC 90045 V1.0 (de)
2025
Buchbeitrag
Investigation of post-processing of additively manufactured stainless steel by electrochemical jet machining
Damm, Philipp; Groschupp, Daniel; Berg, Lars; Thielecke, Alexander; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 54 (2025), S. 2256-2263 [Konferenz: 28th International ESAFORM Conference on Material Forming, ESAFORM 2025, Paestum, Italy, 7-9 May 2025]
Investigation on the surface integrity in electrical discharge machining of Co-Cr-Mo
Lerez, Christoph; Michaelis, Chris; Zak, Laura; Blumenröhr, Lukas; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 54 (2025), S. 2121-2129 [Konferenz: 28th International ESAFORM Conference on Material Forming, ESAFORM 2025, Paestum, Italy, 7-9 May 2025]
Concept and prototype of a 3-component extruder for fusion deposition of vibration-damping polymer concrete
Plänitz, Philipp; Petermann, Richard; Shemchuk, Artem; Majcherek, Sören; Barth, Markus; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 54 (2025), S. 2068-2074 [Konferenz: 28th International ESAFORM Conference on Material Forming, ESAFORM 2025, Paestum, Italy, 7-9 May 2025]
Experimental derivation of process input parameters for pulsed electrochemical machining of additively and conventionally produced 316L stainless steel
Thielecke, Alexander; Clauß, Pascal; Schröder, Maximilian; Meichsner, Gunnar; Petermann, Richard; Damm, Philipp; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 54 (2025), S. 2246-225 [Konferenz: 28th International ESAFORM Conference on Material Forming, ESAFORM 2025, Paestum, Italy, 7-9 May 2025]
Analysis of repeatability for experimental characterization of lateral gap during Pulsed Electrochemical Machining
Petermann, Richard; Clauß, Pascal; Meichsner, Gunnar; Meyer, Frank; Nickel, Steven; Hackert-Oschätzchen, Matthias
In: 21st International Symposium on Electrochemical Machining Technology INSECT 2025 - Chemnitz : Universitätsverlag Chemnitz, insges. 8 S. [Konferenz: 21st International Symposium on Electrochemical Machining Technology, INSECT, Chemnitz, 03.-04.11.2025]
Tool wear analysis in hobbing high torque splined shafts
Paucke, Nils; Beutner, Martin; Damm, Philipp; Meichsner, Gunnar; Hahn, Georg; Zimmermann, Dirk; Steffens, Matthias; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 54 (2025), S. 1646-1655 [Konferenz: 28th International ESAFORM Conference on Material Forming, ESAFORM 2025, Paestum, Italy, 7-9 May 2025]
Begutachteter Zeitschriftenartikel
Experimental characterisation of lateral machining gap during pulsed electrochemical machining for corrosion resistant tool steel
Petermann, Richard; Clauß, Pascal; Meichsner, Gunnar; Meyer, Frank; Hackert-Oschätzchen, Matthias
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 137 (2025), S. 306-311
Method for the characterisation of the material removal in modulated pulsed electrochemical machining
Petermann, Richard; Clauß, Pascal; Meichsner, Gunnar; Vogel, Jacob; Hackert-Oschätzchen, Matthias
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 137 (2025), S. 134-139
Experimental investigation of electrochemical precision machining process for tungsten carbide-cobalt applying sodium nitrate electrolyte
Thielecke, Alexander; Clauß, Pascal; Petermann, Richard; Meichsner, Gunnar; Damm, Philipp; Berg, Lars; Jungblut, Guido; Schäfer, Marco; Hackert-Oschätzchen, Matthias
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 137 (2025), S. 368-373
Reduction of micro‐motion at the tapered connection of hip endoprostheses with an adapted deep rolling process of CoCrMo inner tapers
Döring, Joachim; Voropai, Vadym; Thielecke, Alexander; Meichsner, Gunnar; Maiß, Oliver; Hackert-Oschätzchen, Matthias; Lohmann, Christoph H.; Bertrand, Jessica
In: Advanced materials interfaces - Weinheim : Wiley-VCH, Bd. 12 (2025), Heft 18, Artikel e00404, insges. 10 S.
Superstoichiometric (Al,Cr)N - Nitrogen's whereabouts and role in structure-property relationships
Klimashin, F.F.; Učík, M.; Matas, M.; Holec, D.; Beutner, M.; Hackert-Oschätzchen, Matthias; Xomalis, A.; Schwiedrzik, J.J.; Klusoň, J.; Jílek, M.; Lümkemann, A.; Michler, J.; Edwards, T.E.J.
In: Acta materialia - Amsterdam [u.a.] : Elsevier Science, Bd. 294 (2025), insges. 13 S.
Determination of the NaCl electrolyte viscosity from reactive force field molecular dynamics simulations
Riefer, Arthur; Plänitz, Philipp; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 133 (2025), S. 108-113
Transient 3D simulation of electrolyte flow in a removal device for the determination of process input parameters according to DIN SPEC 91399
Paucke, Nils; Thielecke, Alexander; Petermann, Richard; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 133 (2025), S. 292-297
Artikel in Kongressband
Dependence of friction on boundary curvature for Navier-slip conditions and highly viscous liquids
Riefer, Arthur; Damm, Philipp; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: COMSOL Conference 2025 proceedings, insges. 4 S. [Konferenz: COMSOL Conference 2025, Amsterdam, 31.10.2025]
Hygrothermal simulations for the signal of an integrated RH sensor for wood windows
Riefer, Arthur; Petermann, Richard; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Morawietz, Ulrich; Becher, Philipp; Muschalek, Thomas; Gläser, Markus
In: COMSOL Conference 2025 proceedings, insges. 10 S. [Konferenz: COMSOL Conference 2025, Amsterdam, 31.10.2025]
Simulation of Radon diffusion from soil into buildings considering media lead-through
Riefer, Arthur; Damm, Philipp; Meichsner, Gunnar; Muschalek, Thomas; Gläser, Markus; Schmidt, Ruben; Hackert-Oschätzchen, Matthias
In: COMSOL Conference 2025 proceedings, insges. 4 S. [Konferenz: COMSOL Conference 2025, Amsterdam, 31.10.2025]
2024
Buchbeitrag
Simulation-based analysis of electrical current induction in a device for electrochemical precision machining of Nd Fe B permanent magnets
Thielecke, Alexander; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Berger, Thomas; Loebel, Sascha; Martin, André; Schulze, Robin; Schubert, Andreas
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 41 (2024), S. 2400-2409
Analysis of the influence of the initial surface integrity on the result of burnished high torque splined shafts
Damm, Philipp; Adinehvand, Mohsen; Beutner, Martin; Meichsner, Gunnar; Hahn, Georg; Zimmermann, Dirk; Steffens, Matthias; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 41 (2024), S. 1916-1924
Experimental derivation of process input parameters for electrochemical precision machining of a powder metallurgical tool steel
Petermann, Richard; Clauß, Pascal; Damm, Philipp; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 41 (2024), S. 2365-2373
Begutachteter Zeitschriftenartikel
Resource-efficient Edge AI solution for predictive maintenance
Artiushenko, Viktor; Lang, Sebastian; Lerez, Christoph; Reggelin, Tobias; Hackert-Oschätzchen, Matthias
In: Procedia computer science - Amsterdam [u.a.] : Elsevier, Bd. 232 (2024), S. 348-357
Characterization of iron(III) in aqueous and alkaline environments with ab initio and ReaxFF potentials
Riefer, Arthur; Hackert-Oschätzchen, Matthias; Plänitz, Philipp; Meichsner, Gunnar
In: The journal of chemical physics - Melville, NY : American Institute of Physics, Bd. 160 (2024), Heft 8, Artikel 082501, insges. 14 S.
Dissertation
Untersuchung des Anwendungspotentials von Ni-Basis-Fülldrahtelektroden mit basischer und rutiler Schlackecharakteristik vom Typ T Ni 6625
Burger, Stefan; Jüttner, Sven; Hackert-Oschätzchen, Matthias
In: Düren: Shaker Verlag, Dissertation Otto-von-Guericke-Universität Magdeburg 2024, XIII, 167 Seiten - (Schriftenreihe Fügetechnik Magdeburg; 2024, 1), ISBN: 3-8440-9556-X [Literaturverzeichnis: Seite 114-130]
Nicht begutachteter Zeitschriftenartikel
Gas/hydrogen blends as fuel to produce secondary aluminium
Michaelis, Chris; Koslowski, Eugen; Hackert-Oschätzchen, Matthias; Giese, Anne; Hamers, Christian; Schwarz, Christian
In: International aluminium journal - Hannover : Giesel, Bd. 100 (2024), Heft 1-2, S. 60-65
Methode zur Erstellung digitaler Zwillinge von Prozessenergiequellen für das elektrochemische Präzisionsabtragen
Grießbach, Sören; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Jungblut, Annegret; Jungblut, Guido; Köppl, Alois; Wengerek, Stephan
In: VDE SPEC 90028 V1.0 (de)
Classification of recycled plastics of polyamides by Data Quality Levels for use and (digital) trading
Endres, Hans-Josef; Shamsuyeva, Madina; Doedt, Martin; Schiller, Christian; Jahr, Michael; Scheuble, Martin; Wollny, Andreas; Oberhauser, Teresa; Schoon, Hartmut; Yorgan, Yil; Grießbach, Sören; Hoffmann, Ansgar; Kiefer, Konrad; Zies, Rainer; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Niehues, Maximilian; Lehmann, Harald; Thürer, Susanne; Stiebitzhofer, Hannes; Stammer, Frank; Brkljac, Goran; Buschner, Nadine; Harraß, Michael
In: DIN SPEC 91481:2024-02, Beuth Verlag GmbH
2023
Buchbeitrag
Accuracy of pulsed electrochemical machining of NdFeB rotor magnets
Martin, André; Berger, Thomas; Loebel, Sascha; Schulze, Robin; Thielecke, Alexander; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: International Symposium on Electrochemical Machining Technology 2023 (INSECT 2023) - Saarbrücken : Center for Mechatronics and Automation Technology ; Bähre, Dirk, S. 65-70 [Symposium: 19th International Symposium on Electrochemical Machining Technology, INSECT 2023, Saarbrücken, 13-14 November 2023]
Design of a user-friendly human machine interface for jet electrochemical machining
Damm, Philipp; Meichsner, Gunnar; Lerez, Christoph; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 28 (2023), S. 1643-1652 [Konferenz: 26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Kraków, Poland, April 19-21, 2023]
Digital twin for the determination of process input variables for electrochemical precision machining according to DIN SPEC 91399
Thielecke, Alexander; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: Materials research proceedings - Millersville, PA : Materials Research Forum LLC, Bd. 28 (2023), S. 1653-1662 [Konferenz: 26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Kraków, Poland, April 19-21, 2023]
Begutachteter Zeitschriftenartikel
Integrated biophysical matching of bacterial nanocellulose coronary artery bypass grafts towards bioinspired artery typical functions
Hülsmann, Jörn; Fraune, Theresa; Dodawatta, Baratha; Reuter, Fabian; Beutner, Martin; Beck, Viktoria; Hackert-Oschätzchen, Matthias; Ohl, Claus-Dieter; Bettenbrock, Katja; Janiga, Gábor; Wippermann, Jens; Wacker, Max
In: Scientific reports - [London] : Macmillan Publishers Limited, part of Springer Nature, Bd. 13 (2023), Artikel 18274, insges. 12 S.
Simulation-based analysis of electrical current induction in electrochemical precision machining of Nd-Fe-B permanent magnets
Thielecke, Alexander; Hackert-Oschätzchen, Matthias; Komilov, Nasibull; Meichsner, Gunnar; Petzold, Tom; Loebel, Sascha; Martin, André; Schulze, Robin; Schubert, Andreas
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 117 (2023), S. 225-230
Derivation of parameter sets for the ReaxFF+ method for modeling an electrochemical machining process
Riefer, Arthur; Hackert-Oschätzchen, Matthias; Plänitz, Philipp; Meichsner, Gunnar
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 117 (2023), S. 231-236
2022
Abstrakt
Steigerung des Torsionswiderstands der Konussteckverbindung durch einen angepassten Fertigungsprozess der CoCrMo Hüftkugel
Döring, Joachim; Voropai, Vadym; Thielecke, Alexander; Maiß, Oliver; Müller, Markus; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Häberle, Jürgen; Lohmann, Christoph H.; Bertrand, Jessica
In: 12. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB) - Köln : Deutsche Gesellschaft für Biomechanik ; Potthast, Wolfgang *1967-* . - 2022, S. 203, Artikel P27 [Kongress: 12. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB), Köln, 28.-30. September 2022]
Improving the biofunctionality of bacterial nanocellulose hydrogel scaffolds by bioprocessing strategies
Hülsmann, Jörn; Reuter, Fabian; Beutner, Martin; Fraune, Theresa; Beck, Viktoria; Wacker, Max; Hackert-Oschätzchen, Matthias; Ohl, Claus-Dieter; Bettenbrock, Katja; Scherner, Maximilian Philipp; Wippermann, Jens
In: 32th Annual conference of the European Society for Biomaterials, ESB 2022 - European Society for Biomaterials [Konferenz: 32nd Annual Conference of the European Society for Biomaterials, Bordeaux, France, 4. - 8. September 2022]
How to optimize coronary artery bypass graft prosthesis based on bacterial nanocellulose
Hülsmann, Jörn; Reuter, Fabian; Beutner, Martin; Wacker, Max; Hackert-Oschätzchen, Matthias; Ohl, Claus-Dieter; Bettenbrock, Katja; Janiga, Gábor; Scherner, Maximilian Philipp; Wippermann, Jens
In: 5th International Symposium on Bacterial Cellulose , 2022 - Jena ; Bismarck, Alexander, S. 31
Buchbeitrag
Comparison of electrochemical removal characteristics between magnetized and demagnetized NdFeB
Loebel, Sascha; Petzold, Tom; Martin, André; Steinert, Philipp; Schubert, Andreas; Thielecke, Alexander; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Schulze, Robin
In: 18th International Symposium on Electrochemical Machining Technology 2022 (INSECT 2022) - Tokyo ; Koyano, Tomohiro, S. 51-56 [Symposium: 18th International Symposium on Electrochemical Machining Technology 2022, INSECT 2022, Tokyo, Japan, November 14-15, 2022]
2021
Begutachteter Zeitschriftenartikel
Jet electrochemical machining simulation of intersecting line removals with adjustable nozzle diameter by a finite area element grid
Wienand, Tobias; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 102 (2021), S. 349-354
Artikel in Kongressband
Non-destructive evaluation of mechanical properties of additive manufactured plastic parts by practical application of DIN SPEC 17028:2021-04
Grießbach, Sören; Hackert-Oschätzchen, Matthias; Kausch, Martin; Grießbach, Jörg
In: ASTM International Conference on Additive Manufacturing - ASTM International Additive Manufacturing Center of Excellence . - 2021 [Konferenz: ASTM International Conference on Additive Manufacturing, ASTM ICAM 2021, online, November 1-5, 2021]
Nicht begutachteter Zeitschriftenartikel
Additive Fertigung - Methode zur zerstörungsfreien Ermittlung von mechanischen Eigenschaften von additiv gefertigten Kunststoffteilen
Grießbach, Jörg; Kausch, Martin; Grießbach, Sören; Ewert, Uwe; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Noack, Björn
In: DIN SPEC 17028:2021-04, Beuth Verlag GmbH
2020
Buchbeitrag
Transient Removal Simulation of the Jet Electrochemical Machining Process based on a Finite Area Element Grid
Wienand, Tobias; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias
In: 16th International Symposium on Electrochemical Machining Technology INSECT 2020 , 2020 - [Chemnitz] : Professorship Micromanufacturing Technology, Chemnitz University of Technology ; Schubert, Andreas, S. 105-116 - (Scripts precision and microproduction engineering; volume 14) [Symposium: 16th International Symposium on Electrochemical Machining Technology, Chemnitz, November 24-25, 2020]
Begutachteter Zeitschriftenartikel
Experimental study on micro forming of structured surfaces for high static friction connection elements
Schaarschmidt, Ingo; Steinert, Philipp; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas; Jungblut, Guido
In: Procedia manufacturing - Amsterdam [u.a.] : Elsevier, Bd. 47 (2020), S. 1230-1234
Experimental characterization of resource efficient process chains for electrochemical precision machining of form-bore patterns
Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 95 (2020), S. 748-753
Experimental Characterisation of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation
Berger, Thomas; Herzig, Mathias; Hackert-Oschätzchen, Matthias; Schulze, Hans-Peter; Martin, André; Kröning, Oliver; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2020, Bd. 95, S. 505-510
Working gap analysis in electrochemical precision machining of external geometries with ring cathodes
Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Steinert, Philipp; Schubert, Andreas
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 95 (2020), S. 662-667
Random sequential simulation of the resulting surface roughness in plasma electrolytic polishing of stainless steel
Danilova, Igor; Paul, Raphael; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Quitzke, Susanne; Schubert, Andreas
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 95 (2020), S. 981-986
Experimental analysis of the shape accuracy in electrochemical polishing of femoral heads for hip endoprosthesis
Döbberthin, Christin; Müller, Rico; Meichsner, Gunnar; Welzel, Florian; Hackert-Oschätzchen, Matthias
In: Procedia manufacturing - Amsterdam [u.a.] : Elsevier, Bd. 47 (2020), S. 719-724
2019
Buchbeitrag
Deburring and Edge Shaping by Electrochemical Machining with Differentially Switched Currents ...
Petzold, Tom; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN: 978-3-00-064086-5
Process design for jet plasma electrolytic polishing of stainless steel
Quitzke, Susanne; Martin, André; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Schubert, Andreas
In: International Symposium on Electrochemical Machining Technology INSECT 2019 , 2019 - Saarbrücken : Institute of Production Engineering, S. 125-132 [Symposium: 15th International Symposium on Electrochemical Machining Technology, Saarbrücken, November 14 - 15, 2019]
Removal rate and surface roughness in plasma-electrolytic polishing of 1.4441 stainless steel
Schröder, Sam; Martin, André; Kahle, Vincent; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5
Process Design for Jet Plasma electrolytic Polishing of Stainless Steel
Quitzke, Susanne; Martin, André; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Schubert, Andreas
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5
Simulation-based Design of an Electrolyte System for Electrochemical Machining with Differentially Switched Currents
Petzold, Tom; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas
In: Proceedings of the 6th International Conference on Competitive Manufacturing, 2019, ISBN: 978-0-7972-1779-9
Modelling of Precise Electrochemical Machining for Nickel-based Centrifugal Impellers
Loebel, Sascha; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Petzold, Tom; Zinecker, Mike; Schubert, Andreas
In: Proceedings of the 15th International Symposium on Electrochemical Machining Technology, 2019, Editors: D. Bähre, A. Ernst, ISBN 978-3-00-064086-5
Begutachteter Zeitschriftenartikel
Multiphysics Simulation of Oxide Layer Growth in Localized Anodization of Aluminum Applying a Free-Surface Electrolyte Jet
Hackert-Oschätzchen, Matthias; Paul, Raphael; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 243-248
Localized anodization of the aluminum alloy EN AW-7075 T6 by closed electrolytic free jet
Morgenstern, Roy; Martin, André; Lehnert, Norbert; Scharf, Ingolf; Hackert-Oschätzchen, Matthias; Schubert, Andreas; Lampke, Thomas
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2019, Bd. 480, S. 012015
Implementation of the Machine Tool-Specific Current and Voltage Control Characteristics in Multiphysics Simulation of Electrochemical Precision Machining
Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 237-242
3D Multiphysics Simulation of Jet Electrochemical Machining of Intersecting Line Removals
Paul, Raphael; Hackert-Oschätzchen, Matthias; Danilov, Igor; Zanjani, Matin Yahyavi; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2019, Bd. 82, S. 196-201
Process Control in Jet Electrochemical Machining of Stainless Steel through Inline Metrology of Current Density
Yahyavi Zanjani, Matin; Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Edelmann, Jan; Schubert, Andreas
In: Micromachines, MDPI AG, 2019, Bd. 10, Heft 4, S. 261
Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology
Danilov, Igor; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Meichsner, Gunnar; Edelmann, Jan; Schubert, Andreas
In: Micromachines, MDPI AG, 2019, Bd. 10, Heft 3, S. 214
Artikel in Kongressband
Micro product and process fingerprints for zero-defect net-shape micromanufacturing
Tosello, G.; Gulcur, M.; Whiteside, B.; Coates, P.; Luca, A.; De Sousa Lia Fook, P.V.; Riemer, O.; Danilov, I.; Zanjani, M.Y.; Hackert-Oschätzchen, M.; Schubert, A.; Baruffi, F.; Achour, S.B.; Calaon, M.; Nielsen, C.V.; Bissacco, G.; Cannella, E.; Rasmussen, A.; Bellotti, M.; Saxena, K.; Qian, J.; Reynaerts, D.; Santoso, T.; Syam, W.; Leach, R.; Kose, S.K.; Parenti, P.; Annoni, M.; Cai, Y.; Luo, X.; Qin, Y.; Zeidler, H.
In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, S. 98-99, 2019
2018
Buchbeitrag
Experimental Derivation of Process In-put Parameters for Electrochemical Machining with Differentially Switched Currents
Martin, André; Petzold, Tom; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5
Surface structuring of boron doped CVD diamond by micro electrical discharge machining
Schubert, Andreas; Berger, Thomas; Martin, André; Hackert-Oschätzchen, Matthias; Treffkorn, Nico; Kühn, Ralf
In: AIP Conference Proceedings 1960, 2018
Characterization of the Lateral Working Distance in Precise Electrochemical Machining of Differently Heat Treated Steel
Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Loebel, Sascha; Boenig, Lothar; Schubert, Andreas; Putz, Matthias
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5
Simulation-based Design of Electrochemical Machining Processes for Microstructuring of High-strength Materials
Loebel, Sascha; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5
Design of a Test Rig for Local Surface Modification by Jet Plasma Electrolytic Polishing
Quitzke, Susanne; Kröning, Oliver; Martin, André; Hackert-Oschätzchen, Matthias; Schulze, Hans-Peter; Kranhold, Christian; Zeidler, Henning; Schubert, Andreas
In: Proceedings of the 14th International Symposium on Electrochemical Machining Technology, 2018, Editors: T. Bergs, T. Herrig, S. Harst, A. Klink, ISBN 978-3-86359-667-5
Simulationsbasierte Gestaltung von elektrochemischen Abtragprozessen für hochfeste Materialien
Loebel, Sascha; Hackert-Oschätzchen, Matthias; Paul, Raphael; Meichsner, Gunnar; Schubert, Andreas
In: Tagungsband zum 1. Kolloquium der sächsischen Allianz für Material- und ressourceneffiziente Technologien, Verlag Wissenschaftliche Scripten, 2018, ISBN 978-3-95735-091-6
Begutachteter Zeitschriftenartikel
Study on the Influence of the Processing Speed in the Generation of Complex Geometries in Aluminium Matrix Composites by Electrochemical Precision Machining
Lehnert, Norbert; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 713-718
Analysis of the fundamental removal geometry in electrochemical profile turning with continuous electrolytic free jet
Martin, André; Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 466-470
Design of a High Dynamic Piezo Module for Resource-efficient Electrothermal Precision Ablation
Berger, Thomas; Schulze, Hans-Peter; Hackert-Oschätzchen, Matthias; Herzig, Mathias; Kröning, Oliver; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 678-683
Derivation of Guidelines for Reliable Finishing of Aluminium Matrix Composites by Jet Electrochemical Machining
Lehnert, Norbert; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2018, Bd. 68, S. 471-476
Artikel in Kongressband
Simulation-based Analysis of a Microstructuring Process for Serrated Surfaces with Higher Friction
Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Steinert, Philipp; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2018
Transient Simulation of the Removal Process in Plasma Electrolytic Polishing of Stainless Steel
Danilov, Igor; Hackert-Oschätzchen, Matthias; Schaarschmidt, Ingo; Zinecker, Mike; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2018
Multiphysics simulation of localised anodisation of aluminium
Lehnert, Norbert; Martin, André; Mwangi, James W.; Hackert-Oschätzchen, Matthias; Schubert, Andreas; Morgenstern, Roy; Lampke, Thomas
In: European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018, S. 429-430, 2018
Numerical Investigation of Electrolyte Flow in a Multi-Cathode System for Electrochemical Machining
Penzel, Michael; Schaarschmidt, Ingo; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2018
Nicht begutachteter Zeitschriftenartikel
Methode zur Bestimmung von Prozesseingangsgrößen für das elektrochemische Präzisionsabtragen - Anforderungen, Kriterien, Festlegungen
Meichsner, Gunnar; Köppl, Alois; Wengerek, Stephan; Schulze, Robin; Hackert-Oschätzchen, Matthias
In: DIN SPEC 91399:2018-12, Beuth Verlag GmbH
Elektrochemisches Abtragen im Freistrahl
Schubert, Andreas; Martin, André; Yahyavi Zanjani, Matin; Hackert-Oschätzchen, Matthias
In: Mikroproduktion, 6:34-39, 2018
2017
Buchbeitrag
Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with silicon
Kühn, Ralf; Berger, Thomas; Prieske, Markus; Börner, Richard; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Schubert, Andreas
In: AIP Conference Proceedings, Volume 1896, 2017
Analysis of the Removal Geometry in Electrochemical Straight Turning with Continuous Electrolytic Free Jet
Martin, André; Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Schubert, Andreas
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3
Reduplication of Precise Internal Geometries by Pulsed Electrochemical Machining
Meichsner, Gunnar; Petzold, Tom; Hackert-Oschätzchen, Matthias; Edelmann, Jan; Schubert, Andreas; Putz, Matthias; Hahn, Georg
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3
Development of Interfaces for Material Data Integration in Models of Electrochemical Machining Processes
Loebel, Sascha; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3
Evaluation of On-Machine Gap Measurement Strategies in Jet-Electrochemical Machining
Yahyavi Zanjani, Matin; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas
In: Proceedings of the 13th International Symposium on Electrochemical Machining Technology, Publication Series Applied Electrochemistry in Material Science, Editors: A. Michaelis, M. Schneider, Vol. 6, 2017, ISBN 978-3-8396-1261-3
Modification of the process dynamics in micro-EDM by means of an additional piezo-control system
Herzig, Mathias; Berger, Thomas; Schulze, Hans-Peter; Hackert-Oschätzchen, Matthias; Kröning, Oliver; Schubert, Andreas
In: AIP Conference Proceedings 1896, 2017
Begutachteter Zeitschriftenartikel
Localised anodic oxidation of aluminium material using a continuous electrolyte jet
Kuhn, Danny; Martin, André; Eckart, Christian; Sieber, Maximilian; Morgenstern, Roy; Hackert-Oschätzchen, Matthias; Lampke, Thomas; Schubert, Andreas
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017, Bd. 181, S. 012042
Multiscale Multiphysics Simulation of a Pulsed Electrochemical Machining Process with Oscillating Cathode for Microstructuring of Impact Extrusion Punches
Schaarschmidt, Ingo; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2017, Bd. 58, S. 257-262
Downscaled anodic oxidation process for aluminium in oxalic acid
Sieber, Maximilian; Morgenstern, Roy; Kuhn, Danny; Hackert-Oschätzchen, Matthias; Schubert, Andreas; Lampke, Thomas
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017, Bd. 181, S. 012044
Characterization of an Electrochemical Machining Process for Precise Internal Geometries by Multiphysics Simulation
Hackert-Oschätzchen, Matthias; Paul, Raphael; Kowalick, Michael; Kuhn, Danny; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2017, Bd. 58, S. 175-180
Artikel in Kongressband
Investigation of Forced Convection in Pin Structured Cold Plates for Improved Heat Transfer and Heat Spreading
Penzel, Michael; Zinecker, Mike; Schubert, Andreas; Hackert-Oschätzchen, Matthias; Ludwig, Andreas; Adamczewski, A.; Schulz, Andreas; Lausberg, Martin
In: Proceedings of the 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2017
Multiscale Model of the PECM with Oscillating Cathode for External Geometries using a Virtual Switch
Schaarschmidt, Ingo; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2017
Analysis of Mixing Chambers for the Processing of Two-component Adhesives for Transport Applications
Steinert, Philipp; Paul, Raphael; Schaarschmidt, Ingo; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Muschalek, Thomas; Esslinger, Jürgen; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2017
Approximation of the Flow Field in Electrochemical Machining Incorporating Pressure Drop Calculation
Paul, Raphael; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2017
Nicht begutachteter Zeitschriftenartikel
Microstructuring of Joining Areas in Aluminum Alloy Sheets by Jet Electrochemical Machining
Schimmelpfennig, René; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas
In: Technologies for Lightweight Structures, Volume 1, 2017, S. 17-25
2016
Buchbeitrag
Design and Realisation of a Specific Device for Jet Electrochemical Machining of Rotating Work Pieces
Martin, André; Kuhn, Danny; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7
3D CFD Simulation of Electrochemical Machining Based on Dissolving Characteristics within the SIREKA Joint Research Project
Spille-Kohoff, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Schulze, Robin; Busan, Stefan
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7
Experimental Derivation of Processing Strategies for Electrochemical Precision Machining of Aluminium Matrix Composites
Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Meichsner, Gunnar; Scherf, Christina; Martin, André; Schubert, Andreas
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7
Removal Characteristic of Stainless Steel in Pulsed Electrochemical Machining
Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Petzold, Tom; Krönert, Maik; Edelmann, Jan; Schubert, Andreas
In: Proceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-7
Begutachteter Zeitschriftenartikel
Fast Determination of the Material Removal Characteristics in Pulsed Electrochemical Machining
Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Edelmann, Jan; Schubert, Andreas; Putz, Matthias
In: Procedia CIRP, Elsevier BV, 2016, Bd. 46, S. 123-126
Generation of Complex Surfaces by Superimposed Multi-dimensional Motion in Electrochemical Machining
Schubert, Andreas; Hackert-Oschätzchen, Matthias; Martin, André; Winkler, Sebastian; Kuhn, Danny; Meichsner, Gunnar; Zeidler, Henning; Edelmann, Jan
In: Procedia CIRP, Elsevier BV, 2016, Bd. 42, S. 384-389
Surface Characterization of Particle Reinforced Aluminum-matrix Composites Finished by Pulsed Electrochemical Machining
Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Martin, André; Meichsner, Gunnar; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2016, Bd. 45, S. 351-354
Investigation of Ablation Behaviour in Micro-EDM of Nonconductive Ceramic Composites ATZ and Si3N4-TiN
Schubert, Andreas; Zeidler, Henning; Kühn, Ralf; Hackert-Oschätzchen, Matthias; Flemmig, Sebastian; Treffkorn, Nico
In: Procedia CIRP, Elsevier BV, 2016, Bd. 42, S. 727-732
Generation of Defined Surface Waviness on Tungsten Carbide by Jet Electrochemical Machining with Pulsed Current
Martin, André; Eckart, Christian; Lehnert, Norbert; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2016, Bd. 45, S. 231-234
Jet Electrochemical Machining of Particle Reinforced Aluminum Matrix Composites with Different Neutral Electrolytes
Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Martin, André; Schubert, Andreas
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2016, Bd. 118, S. 012036
Evaluation of the Technical-Economic Potential of Particle- Reinforced Aluminum Matrix Composites and Electrochemical Machining
Schubert, Andreas; Götze, Uwe; Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Herold, Franziska; Meichsner, Gunnar; Schmidt, Anja
In: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2016, Bd. 118, S. 012035
Artikel in Kongressband
Analysis of an Electrochemical Machining Process for Particle Reinforced Aluminium Matrix Composites
Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Kowalick, Michael; Scherf, Christina; Martin, André; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2016
Transient Simulation of an Electrochemical Machining Process for Stamping and Extrusion Dies
Hackert-Oschätzchen, Matthias; Penzel, Michael; Kreissig, Markus; Kowalick, Michael; Zinecker, Mike; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2016
2-D Axisymmetric Simulation of the Electrochemical Machining of Internal Precision Geometries
Hackert-Oschätzchen, Matthias; Kowalick, Michael; Paul, Raphael; Zinecker, Mike; Kuhn, Danny; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2016
2015
Buchbeitrag
Analysis of a PECM Electrode Concept for Micro Injection Moulds by Multiphysics Simulation
Zeidler, Henning; Martin, André; Kowalick, Michael; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: Proceedings of the 4M/ICOMM2015 Conference, Research Publishing Services, 2015
Characterisation of the Influence of Material Hardness in Precise Electrochemical Machining of Steel
Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Edelmann, Jan; Schubert, Andreas; Hahn, Georg; Putz, Matthias
In: Proceedings of the 17th International Conference on the Strength of Materials (ICSMA 17), 2015, ISBN 978-80-87434-07-9
Endformgebung von hochfesten, partikelverstärkten Aluminiummatrix-Verbundwerkstoffen (AMCs) durch elektrochemisches Abtragen
Schubert, Andreas; Hackert-Oschätzchen, Matthias; Lehnert, Norbert
In: DGM-Magazin dIALOG, Ausgabe 4, 2015, S. 104107, ISSN 2193:3383
Begutachteter Zeitschriftenartikel
Study on the dynamic generation of the jet shape in Jet Electrochemical Machining
Hackert-Oschätzchen, Matthias; Paul, Raphael; Martin, André; Meichsner, Gunnar; Lehnert, Norbert; Schubert, Andreas
In: Journal of Materials Processing Technology, Elsevier BV, 2015, Bd. 223, S. 240-251
Micro Electrical Discharge Machining of Tungsten Carbide with Ultra-Short Pulse
Kröning, Oliver; Herzig, Mathias; Hackert-Oschätzchen, Matthias; Kühn, Ralf; Zeidler, Henning; Schubert, Andreas
In: Key Engineering Materials, Trans Tech Publications, Ltd., 2015, Bd. 651-653, S. 759-764
Quantification of the gas development in the electrochemical precision erosion [Quantifizierung der Gasentwicklung beim elektrochemischen Präzisionsabtragen]
Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Matthias; Petzold, Tom; Edelmann, Jan; Schubert, Andreas
In: Galvanotechnik, Bd. 106, 3, S. 484-489, 2015
Multiphysics Simulation of the Material Removal in Jet Electrochemical Machining
Hackert-Oschätzchen, Matthias; Paul, Raphael; Kowalick, Michael; Martin, André; Meichsner, Gunnar; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2015, Bd. 31, S. 197-202
Artikel in Kongressband
Basic Research on Electrochemical Machining of Particle Reinforced Aluminium Matrix Composites
Hackert-Oschätzchen, Matthias; Morgenstern, Roy; Lehnert, Norbert; Martin, André; Lampke, Thomas; Schubert, Andreas
In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015
Optimized design of electrochemical machining processes by a combination of 3D simulation and rapid prototyping of cathodes
Spille-Kohoff, Andreas; Schulze, Robin; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Busan, Stefan
In: Proceedings of the 11th International Symposium on Electrochemical Machining Technology, 2015
Wissenschaftliche Monographie
Gestaltung von elektrochemischen Abtragprozessen durch Multiphysiksimulation gezeigt an der Endformgebung von Mikrobohrungen (Habilitationsschrift)
Hackert-Oschätzchen, Matthias
In: Schubert, A. (Hrsg.): Scripts Precision and Microproduction Engineering, Band 10. Verlag Wissenschaftliche Scripten, 2015, ISBN 978-3-95735-028-2
2014
Buchbeitrag
Determination of the gas generation during precise electrochemical machining
Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Petzold, Tom; Edelmann, Jan; Schubert, Andreas
In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, Editors: D. Bähre, A. Rebschläger, ISBN 978-3-95735-010-7
Evaluation of Gap Control Strategies in Jet Electrochemical Machining on Defined Shape Deviations
Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the 10th International Symposium on Electrochemical Machining Technology, 2014, Editors: D. Bähre, A. Rebschläger, ISBN 978-3-95735-010-7
An investigation into the influence of micro structures on nucleate boiling processes
Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas
In: Advanced Computational Methods and Experiments in Heat Transfer XIII, WIT Press, 2014
Begutachteter Zeitschriftenartikel
Resource-efficient configuration of precise electrochemical ablation processes [Ressourceneffiziente gestaltung des elektrochemischen Präzisionsabtragens]
Schubert, Andreas; Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Maik
In: Galvanotechnik, Bd. 105, 4, S. 703-709, 2014
Resource-Efficient Machining of Hard Metals
Kroening, Oliver; Herzig, Mathias; Schulze, Hans Peter; Hackert-Oschätzchen, Matthias; Kühn, Ralf; Zeidler, Henning; Schubert, Andreas
In: Key Engineering Materials, 2014, S. 708-714, ISSN 1662-9795, 10.4028/www.scientific.net/KEM.611-612.708
Electrochemical machining of hard metals - WC/Co as example
Lohrengel, Manuel M.; Rataj, Kamil P.; Schubert, Nora; Schneider, Michael; Höhn, Sören; Michaelis, Alexander; Hackert-Oschätzchen, Matthias; Martin, André; Schubert, Andreas
In: Powder Metallurgy, Bd. 57, 1, S. 21-30, 2014
Electro-chemical precision machining of rotating workpieces [Elektrochemisches Präzisionsabtragen rotierender Werkstücke]
Hackert-Oschätzchen, Matthias; Boenig, Lothar; Meichsner, Gunnar; Zinecker, Mike; Krönert, Maik; Martin, André; Schubert, Andreas
In: Galvanotechnik, Bd. 105, 3, S. 462-467, 2014
Artikel in Kongressband
Jet-Electrochemical machining of selective laser melted aluminum and steel alloys for micro injection moulds
Schubert, Andreas; Zeidler, Henning; Martin, André; Hackert-Oschätzchen, Matthias; Kempen, Karolien; Kruth, Jean-Pierre
In: Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, Bd. 2, S. 367-370, 2014
Application of nucleate boiling with micro structured surfaces for electronic cooling
Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas
In: PCIM Europe Conference Proceedings, S. 1141-1148, 2014
Transient Simulation of the Electrolyte Flow in a Closed Device for Precise Electrochemical Machining
Hackert-Oschätzchen, Matthias; Penzel, Michael; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2014
Analysis of strategies for gap control in jet electrochemical machining
Hackert-Oschätzchen, Matthias; Martin, Martin; Meichsner, Gunnar; Schubert, Andreas
In: Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, Bd. 2, S. 439-442, 2014
Analysis of the Electrochemical Removal of Aluminium Matrix Composites Using Multiphysics Simulation
Hackert-Oschätzchen, Matthias; Lehnert, Norbert; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2014
Nicht begutachteter Zeitschriftenartikel
Elektrochemisches Präzisionsabtragen - neue Möglichkeiten zur Formgebung schwer bearbeitbarer Werkstoffe
Winkler, Sebastian; Edelmann, Jan; Schubert, Andreas; Hackert-Oschätzchen, Matthias
In: Ingenieur-Spiegel, 2014, Nr. 3, S. 84-85, ISSN: 1868-5919
2013
Buchbeitrag
Resource-Efficient Design of Precise Electrochemical Machining
Schubert, Andreas; Meichsner, Gunnar; Boenig, Lothar; Hackert-Oschätzchen, Matthias; Krönert, Maik; Edelmann, Jan
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3
Jet Electrochemical Machining of Selective Laser Sintered Metals for Micro Injection Moulds
Zeidler, Henning; Martin, André; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3
Precise Electrochemical Machining of Rotating Workpieces
Hackert-Oschätzchen, Matthias; Boenig, Lothar; Meichsner, Gunnar; Zinecker, Zinecker; Krönert, Maik; Schubert, Andreas
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3
Edge Rounding of Micro Bores by Inverse Jet Electrochemical Machining
Hommel, Bernd; Jähn, Frank; Scharrnbeck, Matthias; Garn, Rüdiger; Lenk, Andreas; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: Proceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, Editors: Andreas Schubert, Matthias Hackert-Oschätzchen, ISBN 978-3-942267-95-3
Begutachteter Zeitschriftenartikel
Microstructuring of carbide metals applying Jet Electrochemical Machining
Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
In: Precision Engineering, Elsevier BV, 2013, Bd. 37, Heft 3, S. 621-634
Inverse Jet Electrochemical Machining for Functional Edge Shaping of Micro Bores
Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Kowalick, Michael; Zeidler, Henning; Schubert, Andreas
In: Procedia CIRP, Elsevier BV, 2013, Bd. 6, S. 378-383
Micro-EDM Milling of Electrically Nonconducting Zirconia Ceramics
Schubert, Andreas; Zeidler, Henning; Hahn, Martin; Hackert-Oschätzchen, Matthias; Schneider, Jörg
In: Procedia CIRP, Elsevier BV, 2013, Bd. 6, S. 297-302
Micro-patterning of hard metals by electrochemical machining using closed-loop jet - Part 1 [Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl: Teil 1]
Hackert-Oschätzchen, Matthias; Martin, André; Kühn, Ralf; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
In: Galvanotechnik, Bd. 104, 6, S. 1133-1144, 2013
Micro-patterning of hard metals by electrochemical machining using closed-loop jet - Part 2 [Mikrostrukturierung von Hartmetall durch elektrochemisches Abtragen mit geschlossenem Freistrahl: Teil 2]
Hackert-Oschätzchen, Matthias; Martin, André; Kühn, Ralf; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
In: Galvanotechnik, Bd. 104, 7, S. 1308-1321, 2013
Artikel in Kongressband
Determining of micro structuring technologies for nucleate boiling surfaces
Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas
In: Proceedings of the 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, 2013
Simulation of Heat Transfer on Periodic Microstructured Surfaces for Evaporation Cooling
Hackert-Oschätzchen, Matthias; Paul, Raphael; Penzel, Michael; Zinecker, Mike; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2013
2D Axisymmetric Simulation of the Electrochemical Finishing of Micro Bores by Inverse Jet Electrochemical Machining
Hackert-Oschätzchen, Matthias; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas; Hommel, Bernd; Jähn, Frank; Scharrnbeck, Matthias; Garn, Rüdiger; Lenk, Andreas
In: Proceedings of the European COMSOL Conference 2013
Energy-efficient cooling using microstructures for nucleate boiling process
Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Lausberg, Martin; Schulz, Andreas
In: PCIM Europe Conference Proceedings, S. 1036-1041, 2013
Single Discharge Simulations of Needle Pulses for Electrothermal Ablation
Hackert-Oschätzchen, Matthias; Kreissig, Markus; Kowalick, Michael; Zeidler, Henning; Schubert, Andreas; Kröning, Oliver; Herzig, Mathias; Schulze, Hans-Peter
In: Proceedings of the European COMSOL Conference 2013
2012
Buchbeitrag
Micro Wire Cutting by Pulsed Electrochemical Machining
Schubert, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Martin, André; Edelmann, Jan
In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6
Edge rounding of EDM micro bores using a plasma electrolytic polishing process
Schubert, Andreas; Zeidler, Henning; Meyer, Wolfgang; Unger, M.; Hackert-Oschätzchen, Matthias
In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6
Effect of Tungsten Carbide Grain Size in Jet Electrochemical Machining
Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6
Multiphysics Simulation of the Electrochemical Finishing of Micro Bores
Hackert-Oschätzchen, Matthias; Kowalick, Michael; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2012, ISBN 978-0-9839688-7-0
Pseudo-3D Multiphysics Simulation of a Hydride Vapor Phase Epitaxy Reactor
Hackert-Oschätzchen, Matthias; Penzel, Michael; Plänitz, Philipp; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2012, ISBN 978-0-9839688-7-0
Begutachteter Zeitschriftenartikel
Evaluation of the influence of the electrical voltage in the Jet-ECM [Evaluierung des einflusses des elektrischen potenzials beim Jet-ECM]
Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Martin, André; Schubert, Andreas
In: Galvanotechnik, Bd. 103, 6, S. 1196-1200, 2012
Manufacturing of Tribologically Optimized Surfaces for Powertrain Applications
Schubert, Andreas; Steinert, Philipp; Schmidt, Torsten; Hackert-Oschätzchen, Matthias
In: Key Engineering Materials, Trans Tech Publications, Ltd., 2012, Bd. 523-524, S. 799-804
Micro machining with continuous electrolytic free jet
Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Martin, André; Schubert, Andreas
In: Precision Engineering, Elsevier BV, 2012, Bd. 36, Heft 4, S. 612-619
Artikel in Kongressband
Ultrasonic-assisted micro-EDM of deep bores: Process and discharge analysis
Schubert, Andreas; Zeidler, Henning; Wolf, Nicolas; Hackert-Oschätzchen, Matthias; Schneider, Jörg
In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 391-394, 2012
Fast micromilling with jet electrochemical machining
Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Martin, André; Zeidler, Henning; Schubert, Andreas
In: 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, S. 54-55, 2012
Micro Structured Surfaces for Thermodynamic Applications
Schubert, Andreas; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Zeidler, Henning; Edelmann, Jan
In: Proceedings of the euspen 3rd Topical Meeting - Structured and Freeform Surfaces, 2012
Micro structuring of carbide metals with jet electrochemical machining
Hackert-Oschätzchen, Matthias; Martin, André; Meichsner, Gunnar; Schubert, Andreas
In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 528-532, 2012
Functional edge shaping of micro bores by applying Electrochemical Machining
Schubert, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Zeidler, Henning
In: Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012, Bd. 2, S. 420-423, 2012
Accelerated precision manufacturing through electro discharge machining with ultrasonic vibration assistance
Zeidler, Henning; Hahn, Martin; Schneider, Jörg; Hackert-Oschätzchen, Matthias; Schubert, Andreas
In: 29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, S. 56-57, 2012
2011
Buchbeitrag
Precision and Micro ECM with Localized Anodic Dissolution
Schubert, Andreas; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Edelmann, Jan
In: Proccedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Editor: J.M. Slabe, ISBN 978-961-6692-02-1
Pulsed Electrochemical Machining of Powder Metallurgy Steels
Schubert, Andreas; Meichsner, Gunnar; Hackert-Oschätzchen, Matthias; Zinecker, Mike; Edelmann, Jan
In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, CEST Centre of Electrochemical Surface Technology, 2011, Editors: B. Mollay, M.M. Lohrengel, ISBN 978-3-00-036247-7
Design of Electrochemical Machining Processes by Multiphysics Simulation
Hackert-Oschätzchen, Matthias; Jahn, Stephan F.; Schubert, Andreas
In: Proceedings of the European COMSOL Conference 2011
Ultrasonic Assistance and Nonconductive Materials: Shifting the Boundaries of Micro-EDM
Schubert, Andreas; Zeidler, Henning; Wolf, Nicolas; Hackert-Oschätzchen, Matthias; Schneider, Jörg
In: Proccedings of the 8th International Conference on Industrial Tools and Material Processing Technologies, 2011, Editor: J.M. Slabe, ISBN 978-961-6692-02-1
Evaluation of the Influence of the Electric Potential in Jet Electrochemical Machining
Schubert, Andreas; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Martin, André
In: Proceedings of the 7th International Symposium on Electrochemical Machining Technology, CEST Centre of Electrochemical Surface Technology, 2011, Editors: B. Mollay, M.M. Lohrengel, ISBN 978-3-00-036247-7
Begutachteter Zeitschriftenartikel
Micro machining of different steels with closed electrolytic free jet
Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zeidler, Henning; Zinecker, Mike; Schubert, Andreas
In: AIP Conference Proceedings, Bd. 1353, S. 1337-1343, 2011
Design and realization of micro structured surfaces for thermodynamic applications
Schubert, Andreas; Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike
In: Microsystem Technologies, Springer Science and Business Media LLC, 2011, Bd. 17, Heft 9, S. 1471-1479
Artikel in Kongressband
Precision turning with localized anodic dissolution
Hackert-Oschätzchen, Matthias; Meichsner, Gunnar; Zinecker, Mike; Schubert, Andreas
In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 2, S. 513-517, 2011
Study on the influence of the forming velocity in micro impact extrusion with modular dies
Schubert, Andreas; Jahn, Stephan F.; Müller, Benedikt; Hackert-Oschätzchen, Matthias
In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 1, S. 20-24, 2011
Structuring of tribological active surfaces for reduction of frictional losses
Schubert, Andreas; Edelmann, Jan; Sylla, David; Hackert-Oschätzchen, Matthias
In: Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011, Bd. 2, S. 156-159, 2011