Prof. Kharaghani

Bild von Abdolreza Kharaghani

apl. Prof. Dr.-Ing. habil. Abdolreza Kharaghani

Fakultät für Verfahrens- und Systemtechnik
Lehrstuhl Thermische Verfahrenstechnik
Universitätsplatz 2, 39106 Magdeburg, G10-220

Aktuelle Projekte

Adaptive Porennetzwerkmodellierung und Experimente zu thermochemischen Prozessen in einzelnen porösen Partikeln
Laufzeit: 01.08.2024 bis 31.07.2028

Eine entscheidende Komponente bei der Entwicklung von DEM/CFD-Rechenwerkzeugen zur Beschreibung des thermochemischen Verhaltens von Schüttgütern sind die Einzelpartikelmodelle für DEM. Nur mit genauen Einzelpartikelmodellen lassen sich Partikelumwandlungen und/oder Partikelproduktqualitäten am Ausgang industrieller Reaktoren zuverlässig vorhersagen. Die Komplexität der Beschreibung liegt in der Tatsache begründet, dass auf der Partikelebene Chemie und Transport auf ähnlichen Zeitskalen miteinander konkurrieren.

Das Projekt B4 treibt die Weiterentwicklung der Modellierung reaktiver Prozesse auf Partikelebene voran, wobei der Schwerpunkt auf der Pyrolyse von Biomasse und der Umwandlung von Holzkohle als reaktive Modellsysteme im 2. Die Biomasseumwandlung wurde ausgewählt, da sie als hochkomplexes Modellsystem für DEM-Einzelpartikelmodelle dienen kann, die heterogene Reaktionen, Veränderungen der Partikelform und Porenstruktur sowie anisotrope Intrapartikeltransporteigenschaften umfassen. Als methodischer Ansatz zur Entwicklung anspruchsvoller Einzelpartikelmodelle wird ein neuartiger, einzigartiger simulativ-experimenteller Rahmen abgeleitet. Dieser Rahmen stützt sich auf drei Säulen: die Entwicklung adaptiver Porennetzwerkmodelle (PNM), die Parametrisierung von Kontinuumsmodellen (CM) auf der Grundlage effektiver Transport-, chemischer und morphologischer Eigenschaften, die aus den hochaufgelösten PNM-Simulationen abgeleitet werden, und die Bereitstellung von Messdaten, die die Überbrückung von Skalen von PNM zu CM erleichtern.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Modeling porosity development during drying of porous systems
Laufzeit: 01.09.2023 bis 31.08.2026

Die Bildung und Entwicklung von Poren in porösen Systemen während des Trocknungsprozesses wird auf mehrere nebeneinander liegende und konkurrierende Mechanismen zurückgeführt. In diesem Projekt sollen Berechnungsmodelle entwickelt werden, die diese Mechanismen erfassen und zur zuverlässigen Beschreibung einer Vielzahl von Formulierungen und Trocknern verwendet werden können, wobei die endgültige Porenstruktur mit den Formulierungseigenschaften und Prozessvariablen in Beziehung gesetzt wird.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Drying of thick porous media simulated through integrating pore network models and machine learning algorithms
Laufzeit: 01.06.2022 bis 31.05.2026

A key pillar of the project is to work out an overarching methodology that jointly leverages pore network models and supervised machine learning techniques. A methodology as such will aid simulations of drying in thick porous media, but also thermo-chemical processes (such as pyrolysis) in thermally-thick particles.

Projekt im Forschungsportal ansehen

Continuum model with gas-liquid interfacial area for evaporation in porous media
Laufzeit: 01.11.2022 bis 31.10.2025

Die Trocknungskinetik poröser Materialien wird von den Flüssigkeits-Gas-Grenzflächen (Menisken) beeinflusst, die sich im Laufe der Trocknung bilden und verschieben. In diesem Projekt wird versucht, die Flüssigkeits-Gas-Grenzfläche in Kontinuumsmodelle der Trocknung einzubeziehen, indem der Stand der Technik der Porennetzwerkmodellierung, Porennetzwerksimulationen und neue Experimente kombiniert werden.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Mechanismus der Agglomeration bei der Sprühtrocknung mit Rückführung der feinen Partikel
Laufzeit: 01.05.2022 bis 30.06.2025

Pulver, die durch Sprühtrocknung hergestellt werden, erfordern häufig einen zusätzlichen Vergrößerungsschritt, der hauptsächlich entweder außerhalb des Trockenturms oder durch Rückführung trockener untermaßiger Partikel in den Trockenturm erfolgt. In diesem Projekt werden die Kenntnisse über die Vergrößerung von Pulvern bei der Sprühtrocknung mit Rückführung von Feingut erweitert, wobei sowohl die Prozess- als auch die Produktqualität im Vordergrund stehen. Ein effizientes Vorhersagewerkzeug im Rahmen der numerischen Strömungsmechanik (CFD) wird erstellt und anhand von räumlich und zeitlich aufgelösten Experimenten in einer Pilotanlage bewertet.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Abgeschlossene Projekte

Adaptive Porennetzwerkmodellierung von thermochemischen Prozessen in einzelnen porösen Partikeln
Laufzeit: 01.07.2020 bis 30.06.2024

Ein Einzelpartikelmodell mit hoher Genauigkeit ist von zentraler Bedeutung für DEM/CFD-Simulationen eines Bettes, das mit einer Population von thermisch dicken Feststoffpartikeln gefüllt ist und einem thermischen Prozess (z. B. Trocknung) oder einem thermochemischen Prozess (z. B. Kalzinierung, Pyrolyse oder Verbrennung) ausgesetzt ist. Ein solches Modell muss im Wesentlichen den Wärme- und Stofftransport innerhalb eines einzelnen porösen Teilchens, morphologische Veränderungen seiner Porenstruktur, chemische Reaktionen und die Verbindung zur flüssig-festen Umgebung des Teilchens berücksichtigen. Das Projekt B4 zielt darauf ab, einen großen Durchbruch bei der Modellierung und Simulation dieser Phänomene auf der Ebene eines einzelnen Teilchens und unter realistischen Prozessbedingungen zu erzielen. Dieses Projekt wird sich auf die mikroskopische diskrete und makroskopische Kontinuumsmodellierung sowie auf die experimentelle Charakterisierung der Trocknungs- und Kalzinierungsprozesse konzentrieren. Diskrete Modelle werden auf der Grundlage erster Prinzipien entwickelt. Da sich die Porengröße im Laufe der Zeit aufgrund von thermischen Belastungen (Schrumpfung während der Trocknung) oder chemischen Reaktionen (Verbrauch der festen Phase) ändert, muss die Porenstruktur im Laufe der Zeit verfolgt und entsprechend aktualisiert werden. Die vollständige Berücksichtigung struktureller Veränderungen ist einer der wichtigsten Fortschritte, die mit Hilfe adaptiver diskreter Porennetzmodelle - einer neuen Familie diskreter Modelle - erzielt werden sollen. Es werden Modellerweiterungen vorgenommen, um interne Temperaturgradienten und unstrukturierte Netzwerke mit physikalisch realistischen Porenstrukturen zu berücksichtigen. Die innere Porenstruktur und die volumetrische Veränderung eines Partikels werden durch Techniken wie die µ-CT-Bildgebung charakterisiert. Phänomene auf der Porenskala sind für diskrete Modelle direkt zugänglich. Diese Tatsache wird genutzt, um die klassischen Kontinuumsmodelle von zu überarbeiten, indem Inputs von repräsentativen diskreten Porennetzwerksimulationen genommen und effektive Parameter in ein makroskaliges Kontinuumsmodell eingespeist werden. Um das Kontinuumsmodell mit Vorhersagefähigkeiten auszustatten, werden hochwertige und verlässliche gravimetrische Messungen für einzelne Partikel in Thermowaagenreaktoren unter kontrollierten Bedingungen durchgeführt. Auf dieser Grundlage werden die klassischen Kontinuumsmodelle verbessert und nach ihrer Modellordnungsreduktion in die DEM/CFD-Bibliotheken implementiert.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Enhancement of heat and mass transfer in low temperature drying of slurry droplets
Laufzeit: 01.04.2020 bis 31.12.2023

This project aims to develop advanced models to predict the drying characteristics of single slurry droplets in the presence of soluble gases at low temperature and atmospheric pressure. The models will account for internal and external heat and mass transfer as well as species transport, both in the gas phase and inside the droplet and porous particle. To assess the model predictions, several sets of single slurry droplet experiments under various well-controlled process conditions will be carried out.

Projekt im Forschungsportal ansehen

Drying of porous media with continuous and discontinuous corner films
Laufzeit: 01.01.2019 bis 31.12.2021

Liquid films in pore corners play an important role in the transport processes in porous media during drying. Two types of corner films can be identified: A continuous corner film is connected to a pore occupied by liquid, while a discontinuous one does not contact with any liquid-saturated pores. The continuous and discontinuous corner films can mutually shift their state during drying of porous media. This project aims to understand in detail the transition between continuous and discontinuous corner films by experimental and numerical studies.

Projekt im Forschungsportal ansehen

Discrete-continuous transition for the wetting of porous materials
Laufzeit: 01.06.2016 bis 31.05.2019

Continuous models for the wetting of porous materials are usually oversimplified and, thus, cannot properly describe the influence of micro-structural features of the material. Goal of the project is to simulate the wetting of micro-structured porous materials in a discrete way (by pore networks) and then use the simulation results in new and superior continuous models which are easy to solve whereas preserving as more details of the structure-property relation as possible.

Projekt im Forschungsportal ansehen

Thermo-mechanical behavior of polydisperse particle aggregates: a pore-scale modeling approach
Laufzeit: 01.06.2015 bis 31.05.2019

Discrete network models provide an efficient pore-scale approach to explore the role of individual transport phenomena in deformable particle aggregates made from particles with a multimodal size distribution. During drying, mass transfer (liquid flow and vapor diffusion) is obtained from pore-scale finite volume (PFV) model, whereas the mechanical response (cracks and shrinkage) of the solid to compressive capillary forces is computed by discrete element method (DEM). The DEM-PFV coupled model permits to study the influence of physical properties of liquid, mechanical properties of solid, and rate of drying on the degree of mechanical response.

Projekt im Forschungsportal ansehen

Modellierung des Porennetzwerks bei der Trocknung mit überhitztem Dampf
Laufzeit: 01.01.2014 bis 28.02.2018

Durch Verdampfung an einer heißen Stelle und Kondensation an einer kalten Stelle kann Wärme mit einer höheren effektiven Wärmeleitfähigkeit transportiert werden als mit jedem anderen vorhandenen Material. Dieses Prinzip wird in so genannten Wärmerohren genutzt. Hier wird eine spezielle Art von Heatpipe-Verdampfer betrachtet, bei dem die Verdampfung aus einem nassen porösen Docht in Kontakt mit einer heißen Rippe in Dampftransportrillen erfolgt. Porennetzwerkmodelle werden für die Simulation von Transportphänomenen und der Flüssigkeitsverteilung im Docht verwendet, um optimale Betriebsbedingungen und Dochtstrukturen zu ermitteln. Neuartige Porennetzwerkmodelle werden für die Trocknung mit überhitztem Dampf entwickelt. Im Gegensatz zu herkömmlichen kontinuierlichen Ansätzen können solche Modelle den Einfluss der Mikrostruktur des Produkts auf den Trocknungsprozess erfassen. Das Ziel ist eine effiziente Verarbeitung, die an die Produkteigenschaften und -qualität angepasst ist.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Mikrostruktur von Partikeln, die durch Wirbelschichtagglomeration von weichen Materialien hergestellt werden
Laufzeit: 01.09.2013 bis 08.10.2017

Die Struktur von Agglomeraten, die in Sprühwirbelschichten aus starren Primärpartikeln hergestellt werden, wurde in einem Vorläuferprojekt untersucht. Es wurde gezeigt, wie morphologische Deskriptoren (u.a. Porosität, fraktale Eigenschaften) aus Röntgen-Mikrotomographie-Scans extrahiert werden können und wie solche Deskriptoren von den Betriebsparametern des Partikelformulierungsprozesses abhängen. Diese Untersuchung wird nun auf weiche Primärpartikel ausgeweitet, die für die Lebensmittel- und Pharmaindustrie von großem Interesse sind. Insbesondere werden die strukturellen Merkmale von Maltodextrin-Agglomeraten untersucht, einschließlich der Entwicklung neuer Bildanalysemethoden, die auf Primärpartikel mit unregelmäßiger Form und ungleichmäßiger Größe angewendet werden können.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Porennetzmodell für die gleichzeitige Befeuchtung und Trocknung mit Salzlösungen
Laufzeit: 01.11.2013 bis 31.10.2016

Die gleichzeitige Benetzung poröser Partikel mit Tröpfchen einer aufgesprühten Salzlösung und die Trocknung führt zur Ablagerung des Salzes (verfestigter gelöster Stoff) im porösen Material mit verschiedenen technischen Anwendungen. Die Verteilung des Salzes hängt unter anderem von den Trocknungsbedingungen und der inneren Struktur des porösen Substrats ab. Solche Einflüsse auf den kombinierten Prozess von Benetzung und Trocknung werden mit Hilfe von Porennetzwerkmodellen untersucht. Validierungsexperimente werden in mikrofluidischen Geräten durchgeführt.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Estimation of effective parameters from pore network drying simulations
Laufzeit: 01.10.2013 bis 15.10.2016

Pore network models are unique in connecting structural features of porous media with their macroscopic properties in order to, e.g., find out how long a wet material would take to dry. On the other hand, pore network models require a much longer computation time than numerical solution of differential equations for description of transport phenomena at the macro-scale. Therefore, methods are developed for extracting effective transport coefficients from the results of pore network simulations. When successful, this approach can provide both, description of the influence of material structure and computational speed.

Projekt im Forschungsportal ansehen

Drying of single droplets/particles containing functional oils
Laufzeit: 01.06.2015 bis 28.02.2016

Satisfactory incorporation of functional oils into processed foods is not straightforward because of their susceptibility to autoxidation and low solubility. Microencapsulation technology could solve these problems and spray drying is one of the most promising methods for encapsulating functional oils. Enhancing the encapsulation efficiency and reducing the lipid oxidation are the most important challenges of spray drying for microencapsulation. Understanding the drying behavior of single liquid droplets is of utmost importance for the prediction of physicochemical properties or functionality of the final microparticles. The drying behavior of droplets and particles containing functional oils is studied through both simulations and experiments. The insights gained from this study can be used to track the encapsulation efficiency and the lipid oxidation during the drying of droplets and particles containing functional ingredients.

Projekt im Forschungsportal ansehen

Konvektive Trocknung von PEM-Brennstoffzellen mit Gas-Spülstrom
Laufzeit: 01.04.2014 bis 30.12.2015

Das Wassermanagement in der Gasdiffusionsschicht einer PEM-Brennstoffzelle ist von wesentlicher Bedeutung für die Leistung und Zuverlässigkeit. Da die poröse Schicht sehr dünn ist, ist die Verwendung diskreter Ansätze für eine genaue Simulation erforderlich. Zu diesem Zweck werden Porennetzwerkmodelle entwickelt und angewandt, wobei der Schwerpunkt auf der Trocknung mit Hilfe eines Gasspülstroms liegt.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Konvektive Trocknung von Mikroalgen
Laufzeit: 01.10.2013 bis 30.04.2014

Mikroalgen sind ein sich entwickelnder Rohstoff für verschiedene Anwendungen, einschließlich der Extraktion von Lebensmittelbestandteilen. In diesem Rahmen wird der Einfluss der Trocknung auf den Gesamtlipidgehalt und die Lipidzusammensetzung untersucht. Ziel ist es, Prozessbedingungen zu identifizieren, die zu einer hohen Ausbeute an ernährungsphysiologisch wertvollen (Omega-) Lipiden führen.
Dieser Text wurde mit DeepL übersetzt

Projekt im Forschungsportal ansehen

Modellierung der Kapillarkräfte bei der Konvektionstrocknung von Gelen: Einfluss von Produkt- und Prozessparametern auf Strukturerhaltung und Strukturänderung (Teilprojekt des SPP 1273 Kolloidverfahrenstechnik)
Laufzeit: 01.04.2012 bis 31.03.2014

Um die günstige Konvektionstrocknung zur Herstellung hochporöser Gele zu erschließen, wird der Einfluss von Gelstruktur, Stoffparametern sowie Trocknungsbedingungen auf die mechanische Beanspruchung und Schädigung dieser fragilen Partikelaggregate untersucht. Hierzu wird zum einen eine Kombination von Volume-of-fluid-Methode (für die Flüssigkeitsverteilung) und Diskrete-Elemente-Methode (für die Wirkung der Kapillarkräfte) eingesetzt, zum anderen werden Trocknungsexperimente im Röntgen-Mikrotomographen durchgeführt.

Projekt im Forschungsportal ansehen

Modellierung der Kapillarkräfte bei der Konvektionstrocknung von Gelen: Einfluss von Produkt- und Prozessparametern auf Strukturerhaltung und Strukturänderung (Teilprojekt des SPP 1273 Kolloidverfahrenstechnik)
Laufzeit: 01.04.2010 bis 31.03.2012

Um die günstige Konvektionstrocknung zur Herstellung hochporöser Gele zu erschließen, wird der Einfluss von Gelstruktur, Stoffparametern sowie Trocknungsbedingungen auf die mechanische Beanspruchung und Schädigung dieser fragilen Partikelaggregate untersucht. Hierzu wird zum einen eine Kombination von Volume-of-fluid-Methode (für die Flüssigkeitsverteilung) und Diskrete-Elemente-Methode (für die Wirkung der Kapillarkräfte) eingesetzt, zum anderen werden Trocknungsexperimente im Röntgen-Mikrotomographen durchgeführt.

Projekt im Forschungsportal ansehen

Diskrete Modellierung mechanischer Effekte bei der Trocknung poröser Medien
Laufzeit: 01.10.2006 bis 30.09.2009

Während der Trocknung poröser Materialien können durch Feuchte- und Temperaturgradienten erhebliche Kräfte auftreten, welche zu einer unerwünschten Strukturveränderung führen. Das poröse Material wird als ein Partikelagglomerat modelliert; zur Berechnung der Flüssigkeitsverteilung in den Poren wird das komplementäre Porennetzwerk herangezogen; die mechanischen Effekte zwischen den Primärpartikeln werden mit Hilfe der Diskrete-Elemente-Methode beschrieben. Ziel des zunächst isothermen Ansatzes ist es, günstige Trocknungsbedingungen und Struktureigenschaften zu identifizieren, für welche Materialschädigungen vermieden werden.

Projekt im Forschungsportal ansehen

2024

Begutachteter Zeitschriftenartikel

Advancing process control in fluidized bed biomass gasification using model-based deep reinforcement learning

Faridi, Ibtihaj Khurram; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Processes - Basel : MDPI, Bd. 12 (2024), Heft 2, Artikel 254, insges. 21 S.

2023

Buchbeitrag

Evolution of pore structure during the drying of porous media

Chen, Jin; Lu, Xiang; Kharaghani, Abdolreza

In: EuroDrying 2023 - Lodz ; Musielak, Grzegorz, S. 81-88 [Konferenz: 8th European Drying Conference, EuroDrying 2023, Lodz, 04. - 07. July 2023]

Spray drying of slurry droplets: effect of acoustic field and gas absorption

Pour, Yehonatan; Krasovitov, Boris; Fominykh, Andrew; Hashemloo, Ziba; Kharaghani, Abdolreza; Tsotsas, Evangelos; Levy, Avi

In: EuroDrying 2023 - Lodz ; Musielak, Grzegorz, S. 339-346 [Konferenz: 8th European Drying Conference, EuroDrying 2023, Lodz, 04. - 07. July 2023]

Intensification of spray drying by absorption and desorption of soluble gases investigated experimentally at the level of single liquid droplets

Hashemloo, Ziba; Pour, Yehonatan; Krasovitov, Boris; Fominykh, Andrew; Levy, Avi; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: EuroDrying 2023 - Lodz ; Musielak, Grzegorz, S. 156-163 [Konferenz: 8th European Drying Conference, EuroDrying 2023, Lodz, 04. - 07. July 2023]

CFD simulations of agglomeration in counter-current spray drying with fines return

Bürger, Johannes Vincent; Jaskulski, Maciej; Kharaghani, Abdolreza

In: EuroDrying 2023 - Lodz ; Musielak, Grzegorz, S. 75-80 [Konferenz: 8th European Drying Conference, EuroDrying 2023, Lodz, 04. - 07. July 2023]

Begutachteter Zeitschriftenartikel

Scale transition - pore network study of how pore structure affects the macroscopic parameters of the continuum model for drying

Lu, Xiang; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Drying technology - Philadelphia, Pa. : Taylor & Francis, Bd. 41 (2023), Heft 6, S. 948-967

Spatio-temporal prediction of temperature in fluidized bed biomass gasifier using dynamic recurrent neural network method

Faridi, Ibtihaj Khurram; Tsotsas, Evangelos; Heineken, Wolfram; Koegler, Marcus; Kharaghani, Abdolreza

In: Applied thermal engineering - Amsterdam [u.a.] : Elsevier Science, Bd. 219 (2023), Heft Part A, Artikel 119334

Combined effect of acoustic field and gas absorption on evaporation of slurry droplet

Pour, Yehonatan David; Krasovitov, Boris; Fominykh, Andrew; Hashemloo, Ziba; Kharaghani, Abdolreza; Tsotsas, Evangelos; Levy, Avi

In: Drying technology - Philadelphia, Pa. : Taylor & Francis, Bd. 41 (2023), Heft 5, S. 767-782

Lattice Boltzmann simulations for the drying of porous media with gas-side convection-diffusion boundary

Sourya, Dasika Prabhat; Panda, Debashis; Kharaghani, Abdolreza; Tsotsas, Evangelos; Gurugubelli, Pardha S.; Surasani, Vikranth Kumar

In: Physics of fluids - Melville, NY : American Institute of Physics, Bd. 35 (2023), Heft 11, Artikel 113324, insges. 19 S.

2022

Buchbeitrag

A mesoscopic approach for evaporation in capillary porous media - shan chen lattice Boltzmann method

Panda, Debashis; Paliwal, Shubhani; Bhaskaran, Supriya; Zachariah, Githin Tom; Tsotsas, Evangelos; Kharaghani, Abdolreza; Surasanai, Vikranth Kumar

In: Mass transfer driven evaporation of capillary porous media - Boca Raton: CRC Press; Wu, Rui Ming . - 2022, S. 71

A continuum approach to the drying of small pore network

Lu, Xiang; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Mass transfer driven evaporation of capillary porous media - Boca Raton: CRC Press; Wu, Rui Ming . - 2022, S. 155

Begutachteter Zeitschriftenartikel

Intensification of spray drying granulation process by gas absorption accompanied by chemical dissociation reactions

Poura, Yehonatan David; Krasovitov, Boris; Fominykh, Andrew; Hashemloo, Ziba; Kharaghani, Abdolreza; Tsotsas, Evangelos; Levy, Avi

In: The chemical engineering journal - Amsterdam: Elsevier, Volume 433, 2022, part. 2, articel 133566

Pore network modeling of phase distribution and capillary force evolution during slow drying of particle aggregates

Pham, Son Thai; Chareyre, Bruno; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Powder technology - Amsterdam [u.a.]: Elsevier Science, Bd. 407 (2022)

Deep neural network for generalizing and forecasting on-demand drying kinetics of droplet solutions

George, Oluwafemi Ayodele; Putranto, Aditya; Xiao, Jie; Olayiwola, Patrick Shola; Chen, Xiao Dong; Ogbemhe, John; Akinyemi, Teminijesu Jesufemi; Kharaghani, Abdolreza

In: Powder technology - Amsterdam [u.a.]: Elsevier Science, Bd. 403 (2022)

Pore-scale physics of drying porous media revealed by Lattice Boltzmann simulations

Panda, Debashis; Bhaskaran, Supriya; Paliwal, Shubhani; Kharaghani, Abdolreza; Tsotsas, Evangelos; Surasani, Vikranth Kumar

In: Drying technology - Philadelphia, Pa.: Taylor & Francis, Bd. 40 (2022), 6, S. 1114-1129

Two-equation continuum model of drying appraised by comparison with pore network simulations

Ahmad, Faeez; Prat, Marc; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Bd. 194 (2022)

Proposal for extraction of pore networks with pores of high aspect ratios

Zhan, Ninghua; Wu, Rui; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Physical review fluids - College Park, MD: APS, Bd. 7 (2022), insges. 27 S.

Dissertation

Discrete modeling of capillary ring structures during drying of particle aggregates

Mahmood, Hafiz Tariq; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg Fakultät für Verfahrens- und Systemtechnik 2022, 1 Online-Ressource (xvi, 117 Blätter, 8,52 MB) [Literaturverzeichnis: Blatt 105-113]

Inline-Partikelgrößenbestimmung auf Basis der Ortsfilteranemometrie im Rotor-Wirbelschichtprozess

Langner, Marcel; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Verfahrens- und Systemtechnik 2022, 1 Online-Ressource (XV, 235 Seiten, 5,17 MB) [Literaturverzeichnis: Seite 220-235]

Development and assessment of advanced continuum models for drying porous media on the basis of discrete pore network simulations

Ahmad, Faeez; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Verfahrens- und Systemtechnik 2022, 1 Online-Ressource (xv, 125 Seiten, 3,27 MB) [Literaturverzeichnis: Seite 107-119]

2021

Begutachteter Zeitschriftenartikel

Drying of capillary porous media simulated by coupling of continuum-scale and micro-scale models

Lu, Xiang; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: International journal of multiphase flow - Oxford: Pergamon Press, Bd. 140 (2021)

The role of discrete capillary rings in mass transfer from the surface of a drying capillary porous medium

Mahmood, Hafiz Tariq; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Transport in porous media - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 140 (2021), S. 351-369

Insights into evaporation from the surface of capillary porous media gained by discrete pore network simulations

Lu, Xiang; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Volume 168(2021), article 120877

Three-dimensional visualization and modeling of capillary liquid rings observed during drying of dense particle packings

Kharaghani, Abdolreza; Mahmood, Hafiz Tariq; Wang, Yujing; Tsotsas, Evangelos

In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Bd. 177 (2021)

From micro-scale to macro-scale modeling of solute transport in drying capillary porous media

Ahmad, Faeez; Rahimi, Arman; Tsotsas, Evangelos; Prat, Marc; Kharaghani, Abdolreza

In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Volume 165(2021), part B, article 120722

Superheated steam drying of single wood particles - modeling and comparative study with hot air drying

Le, Kieu Hiep; Tran, Thi Thu Hang; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Chemical engineering & technology: industrial chemistry, plant equipment, process engineering, biotechnology - Weinheim: Wiley-VCH Verl.-Ges., Bd. 44.2021, 1, S. 114-123

2020

Begutachteter Zeitschriftenartikel

Modeling of superheated steam drying of wood particles

Le, K. H.; Tran, T. T. H.; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Journal of mechanical engineering research and developments: JMERD - Cyberjaya, Selangor: Zibeline International Publishing, Bd. 43.2020, 1, S. 160-170

Influence of thermal gradients on the invasion patterns during drying of porous media - lattice Boltzmann method

Panda, Debashis; Paliwal, Shubhani; Sourya, Dasika Prabhat; Kharaghani, Abdolreza; Tsotsas, Evangelos; Surasani, Vikranth Kumar

In: Physics of fluids: devoted to the publication of original theoretical, computational, and experimental contributions to the dynamics of gases, liquids, and complex or multiphase fluids - [S.l.]: American Institute of Physics, Volume 32 (2020), 12, Artikel 122116, insgesamt 26 Seiten

The Brooks and Corey capillary pressure model revisited from pore network simulations of capillarity-controlled invasion percolation process

Lu, Xiang; Kharaghani, Abdolreza; Adloo, Hadi; Tsotsas, Evangelos

In: Processes - Basel: MDPI, Vol. 8 (2020), 10, Artikelnr. 1318, insgesamt 17 Seiten

Experimental benchmarking of diffusion and reduced models for convective drying of single rice grains

Le, Kieu Hiep; Tran, Thi Thu Hang; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Drying technology - Philadelphia, Pa. : Taylor & Francis, Bd. 38 (2020), Heft 1/2, S. 200-210

Pore network model of evaporation in porous media with continuous and discontinuous corner films

Wu, Rui; Zhang, Tao; Ye, Chao; Zhao, C. Y.; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Physical review fluids - College Park, MD: APS, 5 (2020), 1, article 014307, insgesamt 21 Seiten

Transport parameters of macroscopic continuum model determined from discrete pore network simulations of drying porous media - throat-node vs. throat-pore configurations

Lu, Xiang; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Chemical engineering science - Amsterdam [u.a.] : Elsevier Science - Volume 223 (2020), article 115723

Lattice Boltzmann simulations for micro-macro interactions during isothermal drying of bundle of capillaries

Panda, Debashis; Supriya, B.; Kharaghani, Abdolreza; Tsotsas, Evangelos; Surasani, Vikranth Kumar

In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Vol. 220 (2020), Artikelnr. 115634, insgesamt 18 Seiten

Capillary instability induced gas-liquid displacement in porous media - experimental observation and pore network model

Zhang, Tao; Wu, Rui; Zhao, C. Y.; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Physical review fluids - College Park, MD: APS, Vol. 5(2020), 10, article 104305, insgesamt 21 Seiten

Non-local equilibrium continuum modeling of partially saturated drying porous media - comparison with pore network simulations

Ahmad, Faeez; Talbi, Marouane; Prat, Marc; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Volume 228 (2020), article 115957

Habilitation

Drying and wetting of capillary porous materials - insights from imaging and physics-based modeling

Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Magdeburg, Habilitationsschrift Otto-von-Guericke-Universität Magdeburg, Fakultät für Verfahrens- und Systemtechnik 2020, xiii, 141 Blätter [Literaturverzeichnis: Blatt 128-141][Literaturverzeichnis: Blatt 128-141]

2019

Anderes Material

Reaction engineering approach for modeling single wood particle drying at elevated air temperature

Kharaghani, Abdolreza; Le, Kieu Hiep; Tran, Thi Thu Hang; Tsotsas, Evangelos

In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 199.2019, S. 602-612

Buchbeitrag

Drying of a shrinking porous medium saturated with a solution - a pore network study

Rahimil, Arman; Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: EuroDrying'2019 - Torino, Code: 000950009101, Seite 46-53[Konferenz: EuroDrying 2019, Torino, 10-12 July 2019]

Capillary valve effect on drying of porous media

Wu, R.; Zhao, C. Y.; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Heat and mass transfer in drying of porous media - Boca Raton: CRC Press, Taylor & Francis Group; Xu, Peng *1973-* . - 2019, S. 157-187

The role of discrete capillary rings in mass transfer from the surface of a capillary porous medium during drying

Mahmood, Hafiz T.; Lu, Xiang; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Konferenz: EuroDrying 2019, Torino, 10-12 July 2019, EuroDrying'2019 - Torino; Barresi, Antonello, Code 000950009201, Seite 316-323

Begutachteter Zeitschriftenartikel

Continuous modeling of superheated steam drying of single rice grains

Hampel, Neli; Le, Kieu Hiep; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Drying technology - Philadelphia, Pa.: Taylor & Francis, Bd. 37.2019, 12, S. 1583-1596

Microwave- and ultrasound-assisted convective drying of raspberries - drying kinetics and microstructural changes

Szadzinska, Justyna; Łechtanska, Joanna; Pashminehazar, Reihaneh; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Drying technology - Philadelphia, Pa.: Taylor & Francis, Bd. 37.2019, 1, insges. 12 S.

Determination of the moisture transport coefficient from pore network simulations of spontaneous imbibition in capillary porous media

Jabbari, Yasaman; Tsotsas, Evangelos; Kirsch, Christoph; Kharaghani, Abdolreza

In: Chemical engineering science - Amsterdam [u.a.]: Elsevier Science, Bd. 207.2019, S. 600-610

Artikel in Kongressband

Mechanical behavior of particle aggregates during drying

Pham, Thai Son; Chareyre, B.; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: PARTEC 2019 - Nürnberg, 2019; PARTEC$2019 . - 2019, insges. 10 S.[Kongress: PARTEC 2019]

2018

Buchbeitrag

Dependency of continuum model parameters on the spatially correlated pore structure studied by pore-network drying simulations

Lu, Xiang; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Konferenz: IDS 2018, IDS 2018/ International Dryign Symposium - València, Spain: Universitat; Cárcel, Juan Andrés . - 2018, S. 307-314

Discrete modeling of ion transport and crystallization in layered porous media during drying

Rahimi, Arman; Metzger, Thomas; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain/ International Dryign Symposium - València, Spain: Universitat, 2018; Cárcel, Juan Andrés . - 2018, S. 299-306[Konferenz: IDS 2018]

A pore-scale study on the drying kinetics and mechanical behavior of particle aggregates

Pham, Thai Son; Chareyre, B.; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: IDS 2018: 21st International Drying Symposium : proceedings ; September, 2018, València, Spain - València, Spain: Universitat, S. 245-252[Konferenz: IDS 2018]

Begutachteter Zeitschriftenartikel

Spatial morphology of maltodextrin agglomerates from X-ray microtomographic data - real structure evaluation vs. spherical primary particle model

Pashminehazar, Reihaneh; Ahmed, Syed Jawwad; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 331.2018, S. 204-217

A pore network study of evaporation from the surface of a drying nonhygroscopic porous medium

Moghaddam, Alireza Attari; Kharaghani, Abdolreza; Tsotsas, Evangelos; Prat, Marc

In: AIChE journal/ American Institute of Chemical Engineers - Hoboken, NJ: Wiley, 1955, Bd. 64.2018, 4, S. 1435-1447

Continuum-scale modeling of superheated steam drying of cellular plant porous media

Le, Kieu Hiep; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: International journal of heat and mass transfer - Amsterdam [u.a.] : Elsevier, Bd. 124 (2018), S. 1033-1044

Superheated steam drying of single wood particles: A characteristic drying curve model deduced from continuum model simulations and assessed by experiments

Le, Kieu Hiep; Hampel, Neli; Kharaghani, Abdolreza; Bück, Andreas; Tsotsas, Evangelos

In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 36.2018, 15, S. 1866-1881[Special Issue to Celebrate the 30th Anniversary of the Editorship of Prof. Arun S. Mujumdar]

Determination of fractal dimension and prefactor of agglomerates with irregular structure

Pashminehazar, Reihaneh; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 343.2019, S. 765-774, 2018[First online]

Impact of operating conditions on a single droplet and spray drying of hydroxypropylated pea starch - process performance and final powder properties

Gouaou, Imen; Shamaei, Samira; Koutchoukali, Mohamed Salah; Bouhelassa, Mohamed; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Asia-Pacific journal of chemical engineering - Hoboken, NJ: Wiley, Bd. 13.2018, 5

2017

Buchbeitrag

Freeze-Drying

Kharaghani, Abdolreza; Tsotsas, Evangelos; Wolf, Carolin; Beutler, Thomas; Guttzeit, Maik; Oetjen, Georg-Wilhelm

In: Ullmann's encyclopedia of industrial chemistry , 7. edition, release 2015 - Weinheim [u.a.] : Wiley-VCH - 2017, insgesamt 47 Seiten

Insights into the velocity field in a slowly drying capillary porous medium

Moghaddam, Alireza; Kharaghani, Abdolreza; Tsotsas, Evangelos; Prat, Marc

In: EuroDrying'2017: 6th European Drying Conference ; 19, 20, 21 June 2017, University of Liège, Belgium - Liège: University, 2017, Session 2, insgesamt 8 Seiten[Beitrag auf USB-Stick]

Begutachteter Zeitschriftenartikel

Kinematics in a slowly drying porous medium - reconciliation of pore network simulations and continuum modeling

Moghaddam, Alireza Attari; Kharaghani, Abdolreza; Tsotsas, Evangelos; Prat, Marc

In: Physics of fluids: devoted to the publication of original theoretical, computational, and experimental contributions to the dynamics of gases, liquids, and complex or multiphase fluids - [S.l.]: American Institute of Physics, Vol. 29.2017, 2, Art. 022102

Discrete pore network modeling of superheated steam drying

Hiep, Le Kieu; Kharaghani, Abdolreza; Kirsch, Christoph; Tsotsas, Evangelos

In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 35.2017, 13, S. 1584-1601

Microencapsulation of walnut oil by spray drying - effects of wall material and drying conditions on physicochemical properties of microcapsules

Shamaei, Samira; Seiiedlou, Seyed Sadgeh; Aghbashlo, Mortaza; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Innovative food science & emerging technologies: the official journal of the European Federation of Food Science and Technology - New York, NY [u.a.]: Elsevier Science, Bd. 39.2017, S. 101-112

Convective drying in thin hydrophobic porous media

Wu, Rui; Zhao, C. Y.; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, Bd. 112.2017, S. 630-642

Evaporation in capillary porous media at the perfect pistonlike invasion limit - evidence of nonlocal equilibrium effects

Moghaddam, Alireza Attari; Prat, Marc; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: Water resources research: WRR - [New York]: Wiley, Bd. 53.2017, 12, S. 10433-10449

2016

Begutachteter Zeitschriftenartikel

Drying behavior and locking point of single droplets containing functional oil

Shamaei, Samira; Kharaghani, Abdolreza; Seiiedlou, Seyed Sadegh; Aghbashlo, Mortaza; Sondej, Franziska; Tsotsas, Evangelos

In: Advanced powder technology - Amsterdam [u.a.]: Elsevier, 1990, Bd. 27.2016, 4, S. 1750-1760

Pore network simulations of heat and mass transfer inside an unsaturated capillary porous wick in the dry-out regime

Le, Kieu Hiep; Kharaghani, Abdolreza; Kirsch, Christoph; Tsotsas, Evangelos

In: Transport in porous media: TIPM - Dordrecht [u.a.]: Springer Science + Business Media B.V, Bd. 114.2016, 3, S. 623-648

Capillary valve effect during slow drying of porous media

Wu, Rui; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: International journal of heat and mass transfer - Amsterdam [u.a.]: Elsevier, 1960, Bd. 94.2016, S. 81-86

Interaction of droplets with porous structures - pore network simulation of wetting and drying

Rahimi, Arman; Metzger, Thomas; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Drying technology: an international journal - Philadelphia, Pa.: Taylor & Francis, 1983, Bd. 34.2016, 9, S. 1129-1140

Two-phase flow with capillary valve effect in porous media

Wu, Rui; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Chemical engineering science - Amsterdam [u.a.] : Elsevier Science, Bd. 139 (2016), S. 241-248

Influence of pore structure and impregnation-drying conditions on the solid distribution in porous support materials

Börnhorst, M.; Walzel, Peter; Rahimi, Arman; Kharaghani, Abdolreza; Tsotsas, Evangelos; Besser, A.; Kleine Jäger, Frank; Metzger, Thomas

In: Drying technology: an international journal - Philadelphia, Pa.: Taylor & Francis, 1983, Bd. 34.2016, 16, S. 1964-1978

Micro-model experiments and pore network simulations of liquid imbibition in porous media

Sun, Yu; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Chemical engineering science. - Amsterdam [u.a.] : Elsevier Science, Bd. 150.2016, S. 41-53

Three dimensional characterization of morphology and internal structure of soft material agglomerates produced in spray fluidized bed by X-ray tomography

Pashminehazar, Reihaneh; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: Powder technology - Amsterdam [u.a.]: Elsevier Science, 1967, Bd. 300.2016, S. 46-60[Kongress: 7th International Granulation Workshop 2015: Granulation across the length scales]

Optimization of a pilot-scale amine scrubber to remove SO 2 - higher selectivity and lower solvent consumption

Mirdrikvand, Mojtaba; Moqadam, Saeedeh Imani; Kharaghani, Abdolreza; Roozbehani, Behrooz; Jadidi, Naqi

In: Chemical engineering & technology: industrial chemistry, plant equipment, process engineering, biotechnology - Weinheim: Wiley-VCH Verl.-Ges., 1987, Bd. 39.2016, 2, S. 246-254

Artikel in Kongressband

Development of 3D morphological descriptors for agglomerate with complex structure

Pashminehazar, Reihaneh; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: 6th Conference on Industrial Computed Tomography (iCT) 2016 - NDT.net, 2016 . - 2016, insges. 7 S.[Kongress: 6th Conference on Industrial Computed Tomography (iCT) 2016, 9-12 February 2016, Wels, Austria]

Pore network modeling of a salt solution droplet on a porous substrate - imbibition, evaporation, and crystallization

Rahimi, Arman; Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016; International Dryign Symposium (20.:.2016), 2016, Art. A-2-3, insgesamt 8 S.[Beitrag auf USB-Stick]

Reduction of a model for single droplet drying and application for CFD spray drying simulation

Tran, Thi Thu Hang; Jaskulski, Maciej; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. A-3-3, insgesamt 8 S.[Beitrag auf USB-Stick]

Discrete pore network modeling of superheated steam drying

Le, Kieu Hiep; Kharaghani, Abdolreza; Kirch, Christoph; Tsotsas, Evangelos

In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. A-2-2, insgesamt 8 S.[Beitrag auf USB-Stick]

Equivalence of the one-dimensional moisture diffusion model and the three-dimensional pore network drying model

Moghaddam, Alireza Attari; Kharaghani, Abdolreza; Tsotsas, Evangelos; Prat, Marc

In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. C-1-5, insgesamt 8 S.[Beitrag auf USB-Stick]

Influence of process conditions on the morphology of maltodextrin agglomerates investigated by 3D X-ray images

Pashminehazar, Reihaneh; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: PARTEC 2016 - Nürnberg, 2016 . - 2016, insges. 4 S.[Beitrag auf USB-Stick]

Pore network simulations of superheated steam drying

Le, Kieu Hiep; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: PARTEC 2016: International Congress on Particle Technology : April 19-21, 2016, Nürnberg, Germany - Nürnberg, insges. 4 S.[Beitrag auf USB-Stick]

Optimization of the walnut oil microencapsulation process using the response surface methodology

Shamaei, Samira; Seiidlou, Seyed Sadegh; Aghbashlo, Mortaza; Tsotsas, Evangelos; Kharaghani, Abdolreza

In: IDS 2016: 20th International Drying Symposium : August 7 - 10, 2016, Gifu, Japan/ International Dryign Symposium - Gifu, 2016, 2016, Art. P1-12, insgesamt 8 S.[Beitrag auf USB-Stick]

2015

Buchbeitrag

Pore network model for drying of salt solutions - solute migration and crystallization

Rahimi, Arman; Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: First Nordic Baltic Drying Conference: 17-19 Juni 2015, Gdańsk, Poland ; proceedings - Gdańsk, 2015; Goncharova-Alves, Svetlana . - 2015, insges. 15 S.[Beitrag auf USB-Stick]

Pore network simulation of salt crystallization in drying porous media

Rahimi, Arman; Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: EuroDrying'2015 - 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings: 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings - Szent István University, 2015; Farkas, I. . - 2015, S. 345-352

Pore network simulation of heat and mass transfer in superheated steam drying

Le, Kieu Hiep; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: EuroDrying'2015 - 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings: 5th European Drying Conference, October 21-23, 2015, Budapest, Hungary ; proceedings - Szent István University, 2015 . - 2015, S. 211-219

Liquid distribution and structural changes during convective drying of gels

Kharaghani, Abdolreza; Kirsch, Christoph; Metzger, Thomas; Tsotsas, Evangelos

In: Colloid Process Engineering - Cham: Springer, 2015; Kind, Matthias . - 2015, S. 93-112

Begutachteter Zeitschriftenartikel

Polystyrene pyrolysis using silica-alumina catalyst in fluidized bed reactor

Imani Moqadam, Saeedeh; Mirdrikvand, Mojtaba; Roozbehani, Behrooz; Kharaghani, Abdolreza; Shishehsaz, Mohammad Reza

In: Clean technologies and environmental policy. - Berlin : Springer, Bd. 17.2015, 7, S. 1847-1860

Monitoring of initial porosity and new pores formation during drying - a scientific debate and a technical challenge

Khalloufi, Seddik; Kharaghani, Abdolreza; Almeida-Rivera, Cristhian; Nijsse, Jaap; Dalen, Gerard; Tsotsas, Evangelos

In: Trends in food science & technology - Amsterdam [u.a.]: Elsevier Science, 1990, Bd. 45.2015, 2, S. 179-186

Drying kinetics and microstructural and sensoryproperties of black chokeberry (aronia melanocarpa) as affected by drying method

Calín-Sánchez, Ángel; Kharaghani, Abdolreza; Lech, Krzysztof; Figiel, Adam; Carbonell-Barrachina, Ángel A.; Tsotsas, Evangelos

In: Food and bioprocess technology: an international journal - New York, NY: Springer Science + Business Media, LLC, 2008, Bd. 8.2015, 1, S. 63-74

Drying with formation of capillary rings in a model porous medium

Vorhauer, Nicole; Wang, Yujing; Kharaghani, Abdolreza; Tsotsas, Evangelos; Prat, Marc

In: Transport in porous media - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1986, Bd. 110.2015, 2, S. 197-223

Lotion distribution in wet wipes investigated by pore network simulation and X-ray micro tomography

Sun, Yu; Kharaghani, Abdolreza; Metzger, Thomas; Müller, Jörg; Tsotsas, Evangelos

In: Transport in porous media: TIPM - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1986, Bd. 107.2015, 2, S. 449-468

Artikel in Kongressband

Micro-structure of maltodextrin agglomerates produced by fluidized bed

Pashminehazar, Reihaneh; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: 7th International Granulation Workshop - Sheffield, 2015 . - 2015, insges. 16 S.[Beitrag auf USB-Stick]

2014

Buchbeitrag

Pore network simulations to determine the influence of pore structure on wetting-drying kinetics of porous particles

Rahimi, Arman; Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: IDS 2014: proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France - Les Ulis: EDP Sciences, 2014; Andrieu, Julien . - 2014, insges. 8 S.Kongress: IDS 2014 19 (Lyon, France : 2014.08.24-27)

Visualization and modeling of liquid film rings observed during drying of particle packings

Wang, Yuing J.; Mahmood, H. T.; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: IDS 2014 : proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France. - Les Ulis : EDP Sciences, insges. 8 S.Kongress: IDS 2014; 19 (Lyon, France) : 2014.08.24-27

Physical and sensory properties of chokeberry fruits dried with different methods

Calín-Sánchez, Á.; Kharaghani, Abdolreza; Lech, K.; Figiel, A.; Carbonell-Barrachina, Á. A.; Tsotsas, Evangelos

In: IDS 2014 : proceedings of the 19th International Drying Symposium : August 24-27, 2014, Lyon, France. - Les Ulis : EDP Sciences, insges. 6 S.Kongress: IDS 2014; 19 (Lyon, France) : 2014.08.24-27

Begutachteter Zeitschriftenartikel

Characterization of the guided wave propagation in simplified foam, honeycomb and hollow sphere structures

Hosseini, Seyed Mohammad Hossein; Willberg, Christian; Kharaghani, Abdolreza; Gabbert, Ulrich

In: Composites / B: an international journal - Amsterdam [u.a.]: Elsevier, Bd. 56 (2014), S. 553-366

2013

Buchbeitrag

Discrete three-dimensional model for drying particle aggregates

Kharaghani, Abdolreza; Kirsch, Christoph; Tsotsas, Evangelos

In: PARTEC 2013 : International Congress for Particle Technology ; Nürnberg, Germany, 23. - 25.4.2013 ; together with POWTECH 2013, TechnoPharm 2013 ; abstracts and proceedings. - Nürnberg : Nürnberg Messe, insges. 4 S.Kongress: PARTEC 2013; (Nürnberg) : 2013.04.23-25

Begutachteter Zeitschriftenartikel

Numerical simulation of Lamb wave propagation in metallic foam sandwich structures - a parametric study

Hosseini, Seyed Mohammad Hossein; Kharaghani, Abdolreza; Kirsch, Christoph; Gabbert, Ulrich

In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 97 (2013), S. 387-400

Micro-scale fluid model for drying of highly porous particle aggregates

Kharaghani, Abdolreza; Kirsch, Christoph; Metzger, Zhomas; Tsotsas, Evangelos

In: Computers & chemical engineering : an international journal of computer applications in chemical engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 52.2013, S. 46-54

Artikel in Kongressband

Pore-scale visualization and simulation of liquid films for drying particle packing

Wang, Yujing; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: European Drying'2013 : Paris, 2 - 4 October 26-28 ; proceedings, oral presentationen. - Paris, insges. 8 S.Kongress: EuroDrying 2013; (Paris) : 2013.10.02-04

2012

Begutachteter Zeitschriftenartikel

Pore network drying model for particle aggregates - assessment by X-ray microtomography

Wang, Yujing; Kharaghani, Abdolreza; Metzger, Thomas

In: Drying technology: an international journal - Philadelphia, Pa: Taylor & Francis, Bd. 30.2012, 15, S. 1800-1809[Special Issue: Selected Papers from the Asia-Pacific Drying Conference 2011, Part 2]

Artikel in Kongressband

Investigation of lotion distribution in wet wipes by pore network model and micro computed tomography

Sun, Yu; Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos; Müller, Jörg

In: Fourth international conference on porous media and its applications in science, engineering, and industry: June 17-22, 2012, Potsdam, Germany ; proceedings - Potsdam, insges. 7 S.Kongress: International Conference on Porous Media and Its Applications in Science, Engineering and Industry 4 (Potsdam : 2012.06.17-22)

Direct imaging od convective drying process for single and dual cells of two-dimensional particle packings

Kharaghani, Abdolreza; Anyamene, David; Tsotsas, Evangelos

In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 7 S.Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Pore-scale comparison of liquid distributions between pore network drying simulations and x-ray tomography

Wang, Yujing; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 8 S.Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Modeling droplet evolution on a porous particle as micro-scale process in fluidized bed spray drying

Sun, Yu; Kharaghani, Abdolreza; Tsotsas, Evangelos

In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 8 S.Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Influence of wetting properties on drying behavior of highly porous particle aggregates

Kharaghani, Abdolreza; Kirsch, Christoph; Tsotsas, Evangelos

In: IDS 2012: proceedings of the18th International Drying Symposium ; conference proceedings ; November 11th-15th, 2012, Xiamen, China - Xiamen, 2012 . - 2012, insges. 9 S.Kongress: IDS 2012 18 (Xiamen, China : 2012.11.11-15)

Originalartikel in begutachteter internationaler Zeitschrift

An irregular pore network model for convective drying and resulting damage of particle aggregates

Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: Chemical engineering science - Amsterdam: Elsevier, 1951, Bd. 75.2012, S. 267-278

2011

Buchbeitrag

Visualization of liquid in drying particle aggregates by X-ray microtomography and use for pore-scale modelling

Wang, Yujing; Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: Proceedings of the 3rd European Drying Conference (EuroDrying), October 26-28, 2011, Palma de Mallorca/Spain - Palma de Mallorca: Universitat de les Illes Balears, insges. 3 S.

Originalartikel in begutachteter internationaler Zeitschrift

A proposal for discrete modeling of mechanical effects during drying, combining pore networks with DEM

Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: AIChE journal: an official publication of the American Institute of Chemical Engineers : chemical engineering research and development - Hoboken, NJ: Wiley-Blackwell, Bd. 57.2011, 4, S. 872-885

Originalartikel in begutachteter zeitschriftenartiger Reihe

Three-dimensional micro-scale model for convective drying

Kharaghani, Abdolreza; Kirsch, Christoph; Metzger, Thomas; Tsotsas, Evangelos

In: Conference proceedings, 2011 AIChE annual meeting: Minneapolis, USA, October 16 - 21, 2011 - New York, NY: American Inst. of Chemical Engineers, insges. 9 S.

2010

Buchbeitrag

An irregular pore network model for convective drying of aggregates - capillary and micro-mechanical effects

Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: Drying 2010 ; Vol. A. - Barleben-Magdeburg : Docupoint GmbH, S. 132-140Kongress: IDS; 17 (Magdeburg) : 2010.10.03-06

Dissertation

Irregular pore networks and mechanical effects during drying of porous media

Kharaghani, Abdolreza; Tomas, Jürgen; Tsotsas, Evangelos; Metzger, Thomas

In: Zugl.: Magdeburg, Univ., Fakultät für Verfahrens- und Systemtechnik, Diss., 2010: [Magdeburg]: Docupoint-Verl., 1. Aufl., XIV, 148 S., graph. Darst., 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; Vol. 1)

Artikel in Kongressband

Pore network modeling of mechanical effects during drying

Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: Third Internatinal Conference on Porous Media and its Applications in Science, Engineering and Industry : June 20-25, 2010 Montecatini, Italy ; proceedings. - Montecatini, insges. 6 S.Kongress: ICPM; 3 (Montecatini, Italy) : 2010.06.20-25

2009

Artikel in Kongressband

Pore-scale modeling of drying-induced cracks

Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: 8th World Congress of Chemical Engineering : 23.-27. August, 2009, Montreal/Canada ; proceedings. - Montreal, insges. 6 S.Kongress: WCCE; 8 (Montreal) : 2009.08.23-27[Beitrag auf USB-Stick]

2008

Buchbeitrag

Mechanical effects during isothermal drying - a new discrete modelling approach

Kharaghani, Abdolreza; Metzger, Thomas; Tsotsas, Evangelos

In: Drying 2008 ; Vol. A. - Mumbai : Department of Chemical Engineering, Institute of Chemical Technology, University of Mumbai, S. 440-448Kongress: IDS 2008; 16 (Hyderabad, India) : 2008.11.09-12

  • Dr.-Ing. habil. Thomas Metzger
  • BASF AG, Ludwigshafen
  • Fraunhofer IFF, Magdeburg
  • Fraunhofer IFF, Magdeburg, Dr. Wolfram Heineken
  • Nestlé, Switzerland
  • Prof. Dr.-Ing. Evangelos Tsotsas, OvGU Magdeburg
  • Prof. Mujumdar, University of Singapore
  • Carbion Innovation Centre
  • Danone Nutricia Research
  • Dr. Maciej Jaskulski, TU Lodz
  • International Fine Particle Research Institute
  • Merck Group
  • Prof. Alba Dieguez Alonso
  • Prof. Avi Levy
  • Prof. Marc Regier, Hoschule Trier
  • Prof. Rui Wu
  • Prof. Viktor Scherer, Ruhr-Universität Bochum
2006 - 2010 
Promotion zum Doktor der Ingenieurwissenschaften Thermische Verfahrenstechnik an der Otto-von-Guericke-Universität Magdeburg (OvGU)

2010 - 2013 
Wissenschaftlicher Mitarbeiter im SPP 1273 "Kolloidverfahrenstechnik" an der OvGU

seit Juni 2013 
Gruppenleiter für Trocknung und Porennetzwerks an der OvGU

2013 - 2020
Habilitation und Venia Legendi im Fach „Verfahrenstechnik poröser Materialien” an der OvGU

Dezember 2024
Ernennung zum außerplanmäßigen Professor

Letzte Änderung: 19.03.2025 - Ansprechpartner: Webmaster