7th Research Framework Programme

Completed projects

2013 bis 2018 EU - FP7 New approaches in the development of Hypoallergenic implant material in orthopedics: steps to personalised medicine Die Entwicklung von hypoallergenen Materialien für Endoprothesen steht im Mittelpunkt des am, 01.08.2013, gestarteten Projekts HypOrth. Das Projekt, das von, Prof. Christoph H. Lohmann (Otto-von-Guericke-Universität Magdeburg) koordiniert wird, verfolgt dabei zwei Ziele: Zum einen werden die Ursachen für Komplikationen, vor allem immunologische Abwehrreaktionen und Infektionen, ergründet. Zum anderen werden, basierend auf diesen Erkenntnissen, neuartige orthopädische Implantate mit verbesserter Biokompatibilität entwickelt., Die Zusammenarbeit von Forschung und Wirtschaft ist für dieses Projekt ganz wesentlich. So setzt sich das Konsortium von HypOrth aus Forschungs-Einrichtungen aus Deutschland (Otto-von-Guericke-Universität Magdeburg), Estland (Universität Tartu), Polen (Instytut Obróbki Plastycznej, Metal Forming Institute, Posen), Ungarn (Ungarische Akademie der Wissenschaften, Budapest) und Dänemark (Dänishes Technologieinstitut, Zentrum für Chemie und Biotechnologie, Aahrus), sowie aus Wirtschaftspartnern aus Spanien (Progenika, Derio Vizcaya) und der Schweiz (Mathys AG, Bettlach) zusammen. Leiter/-in: Prof. Dr. Christoph Lohmann View project in the research portal
2014 bis 2018 EU - FP7 IMAILE - Innovative Methods for Award Procedure of ICT Learning in Europe Entwicklung einer neuen Generation einer "persönlichen Lernumgebung", Das Ziel des IMAILE-Projektes ist die Entwicklung einer neuen Generation einer "persönlichen Lernumgebung" im Primar- und Sekundarbereich und hier insbesondere am Beispiel der sog. MINT-Fächer (Mathematik, Informatik, Naturwissenschaften und Technik). Hierbei sollen sowohl die unterschiedlichen individuellen Lernstile von Schülerinnen und Schülernaber auch der Zugriff über verschiedenste technische Geräte (Bring-Your-Own-Device)berücksichtigt werden., Die Entwicklung einer solchen Umgebung wird im Rahmen des von der Europäischen Kommission mit 4,6 Mio Euro geförderten Projektes unter Verwendung des Pre-Commercial-Procurement-Verfahrens (PCP) ausgeschrieben. Zu den Aufgabenschwerpunkten der OVGUgehört die Mitarbeit an der Vorbereitung und Durchführung der vorkommerziellen Ausschreibungder personalisierten Lernumgebung. Durch die Mitarbeit kann Sachsen-Anhalt Einfluss auf die Leistungsbeschreibung nehmen, um so z. B. die Interessen des Bildungssystems Sachsen-Anhalts mit seinen föderalen Strukturen abzubilden und einfließen zulassen., Koordiniert wird das Projekt durch die schwedische Kommune Halmstad., Es sind zehn Partner aus sieben europäischen Ländern beteiligt. Leiter/-in: Dr. Henry Herper View project in the research portal
2015 bis 2018 EU - FP7 Gannet 53 A two-part, multicentre, international phase I and II trial assessing the safety ans efficacy of the Hsp90 inhibitor ganetesip in combination with paclitaxel weekly in women with platinum-resistant epithelial ovarian, fallopian tube or primary peritoneal cancer with stabilised mutant p53. Leiter/-in: apl. Prof. Dr. Atanas Ignatov View project in the research portal
2013 bis 2017 EU - FP7 rBirth, Brain Imaging Return to Health Extended lifespan is a new and permanent feature of human life globally. Ageing is accompanied by cognitive decline and greater risk of depression and anxiety. At the cellular level, diminished birth of new neurons (neurogenesis) contributes to cognitive decline and increased depressive and anxiety disorders that are associated with ageing., The r BIRTH consortium is a, Marie Curie Initial Training Network, that gathers experts on molecular mechanisms of age-associated pathologies including neurodegeneration and depression. They work together to identify stress-regulated molecules provoking neuronal death and hindering neurogenesis, and monitor the consequences of these processes in human brain. We predict that smart-targeting of stress signaling will act synergistically to improve brain function in depressive disorders and ageing., The work is funded by the European Commission (FP7) under the sub-programme PEOPLE (Marie Curie Actions). 16, early stage researchers, will be trained in the topics of the programme i.e. molecular imaging (MRI), proteomics, immunotechnology, high content screening, molecular neuroscience, neuropharmacology and patient studies. The training is provided by seven universities, two private companies and one non-profit research organisation from 7 European countries. Leiter/-in: Thomas Frodl View project in the research portal
2013 bis 2017 EU - FP7 INDIREA - Individualised Diagnostics and Rehabilitation of Attention We propose a training network based around a linked set of research projects which attempt to improve the diagnosis and rehabilitation of neuropsychological disorders of attention, with each project linked to an external industrial partner in order to commercialise emerging diagnostic and rehabilitation procedures. New diagnostic procedures will link clinical measures of attentional disorders to a detailed mathematical account, which can in turn be linked to computational models of neuronal function. These behavioural measures will be integrated with brain imaging indices (using fMRI, EEG, MEG) to explain attentional disorders at a neural as well as a functional level. The emerging diagnostic procedures will be used to target individualised rehabilitation for patients, assessing effects of direct brain stimulation, EEG-based biofeedback, cognitive training of attention, and drug intervention. Each project will operate across both academic and industrial partners in the network, giving a unique commercial orientation to the training. Overall the project will advance neuropsychological diagnostics and rehabilitation, while giving trainees state-of-the-art inter-disciplinary research and entrepreneurial skills. Leiter/-in: Jochen Braun View project in the research portal
2014 bis 2016 EU - FP7 GLAMURS - Green Lifestyles, Alternative Models and Upscaling Regional Sustainability Das EU-Projekt GLAMURS untersucht Hindernisse und Perspektiven für die Förderung der Nachhaltigkeit und ökologischer Wirtschaft in Europa. Um den Wandel zu einem "grüneren" Europa zu unterstützen und zu beschleunigen werden mehrere Wege aufgezeigt. Wissenschaftler und Wissenschaftlerinnen aus Psychologie, Ökonomie, Politik- und Umweltwissenschaften entwickeln im Austausch mit Akteur*innen vor Ort Theorien und Modelle zur Identifikation von Hindernissen und Perspektiven im Prozess der Transformation zu nachhaltigen Lebensstilen und Wirtschaftsformen. Untersucht werden individuelle und gesellschaftliche Hindernisse in Wechselwirkung mit regionalen Bedingungen. Dazu werden sieben Fallregionen in verschiedenen EU-Ländern genauer untersucht (z.B. Galizien, Altmark, Südtirol)., Die Forschung wird politische Entscheidungsträger*innen und Akteur*innen auf der europäischen und regionalen Ebene involvieren, um die Ziele der Europe-2020-Strategie und der Ressourceneffizienzinitiative zu erreichen. Das Projekt wird dazu beitragen, politische Strategien zu entwickeln, die den Wandlungsprozess in Europa unterstützen. Leiter/-in: Prof. Dr. Ellen Matthies View project in the research portal
2014 bis 2016 EU - FP7 Miniature Insect Model for Active Learning (MINIMAL) Biology provides the inspiration for a vision of small low-power devices that are able to learn rapidly and autonomously about environmental contingencies, enabling prediction an adaptive anticipatory action. Larval Drosophila have fewer than 10,000 neurons, yet express a variety of complex orientation and learning behaviours, including non-trivial anticipatory actions requiring context-dependent evaluation of the value of learned cues. Current computational learning theory cannot fully account for or replicate these capacities. We aim to develop a new foundation for understanding natural learning by developing a complete multilevel model of learning in larvae. Our aims are: (1) to analyse at a fine scale how larval olfactory behaviour is controlled and altered by associative conditioning, linked to agent-based models that ground learning capabilities in ongoing sensorimotor control; (2) to build one-to-one computational neural models that can be validated by exploiting the recent expansion of the Drosophila neurogenetic toolkit to gain unprecedented ability to characterise and manipulate neural circuits during unconstrained behaviour; (3) to derive from these models novel, generalisable algorithms and circuit architectures that can be used to enhance the learning and anticipatory capabilities of machines. Leiter/-in: Bertram Gerber View project in the research portal
2012 bis 2016 EU - FP7 HiMR - Ultra-High Field Magnetic Resonance Imaging The High field Magnetic Resonance (HiMR) Initial Training Network aims to train the future leaders of academic and industrial research in the fundamental science and novel applications of ultra-high field (UHF) in vivo magnetic resonance (MR), in order to address an increasing and currently unmet demand from academia and industry for such specialists. The highly complex and multi-faceted nature of UHF MR means that excellent training can only be provided by immersing ESRs in an environment that integrates different research areas, sectors and groups., The HiMR ITN is centred on a cutting edge, multidisciplinary research program that exploits the complementarities of the participants. This research programme is organised into four themes each focused on a crucial area of development of UHF. The first focuses on improved structural imaging, advancing our understanding of the origins of contrast in MRI scans and developing non-invasive biomarkers for multiple sclerosis. The second theme is centred upon exploiting UHF to develop ultra-high resolution functional MRI (fMRI) which will be very important in basic neuroscience research. It also aims to make fMRI more quantitative, thus encouraging its uptake in the clinic. The third theme aims to exploit the enhanced sensitivity of MR spectroscopy (MRS) at UHF in developing highly specific biomarkers. The final theme will develop novel hardware for both research and in the clinic, and methods of monitoring and correcting motion which limits in-vivo MR resolution. Finally the HiMR ITN will provide a unique opportunity to measure safety outcomes over a large group of workers., The interdisciplinary and intersectoral training program will provide a platform for training ESRs to become specialists in UHF MR, whilst also furnishing them with experience of a broad range of work environments, experimental techniques and theoretical knowledge relevant to the full range of in vivo MR. Leiter/-in: Oliver Speck View project in the research portal
2013 bis 2016 EU - FP7 COINVENT - Concept Invention Theory Kreative Computer finden neue Ideen, Kombinatorische Kreativität ist die Fähigkeit, neue Ideen durch eine überraschende Kombination und Vermischung bekannter Ideen zu finden. Diese Art von Kreativität mit Computern zu realisieren oder zu simulieren ist eine große Herausforderung. Eine besondere Schwierigkeit besteht darin, Algorithmen zu entwickeln, die den Wert neu geschaffener Ideen bewerten., In COINVENT werden wir eine formale Theorie der Begriffserfindung entwickeln, die Einsichten aus der Kognitionswissenschaft und der Künstlichen Intelligenz verbindet. Wesentlicher Bestandteil wird eine mathematische Theorie der Begriffe sein, welche als Fundament für Fauconniers und Turners Theorie der Begriffsverschmelzung (conceptual blending) dienen kann. Denn obgleich diese Art von Begriffsverschmelzung erfolgreich in der Beschreibung kombinatorischer Kreativität in diversen Bereichen angewandt wurde, ist sie wegen des Fehlens einer hinreichend präzisen mathematischen Charakterisierung kaum zur Entwicklung von kreativen Computersystemen genutzt worden., Der zu entwickelnde Prototyp eines autonomen kreativen Computersystems wird in zwei Bereichen durch Menschen evaluiert werden, in der Mathematik und in der Musik. Die Ergebnisse des Projektes werden neue wissenschaftliche Einblicke in die Natur der Kreativität erlauben und es werden die Grundlagen für eine Fortentwicklung autonomer kreativer Computersysteme gelegt. Leiter/-in: Prof. Dr.-Ing. habil. Till Mossakowski View project in the research portal
2012 bis 2016 EU - FP7 ELECON - Electricity Consumption Analysis to Promote Energy Efficiency Considering Demand Response and Non-technical Losses Eine zeitnahe und erfolgreiche Konzeptionierung und Umsetzung eines Smart Grids, das eine intelligente Vernetzung aller Akteure im elektrischen  Versorgungsnetz durch innovative Kommunikationstechnologien bedeutet, erfordert eine starke Zusammenarbeit der weltweiten Kompetenzen und die Förderung des wissenschaftlichen Nachwuchses. Innerhalb des IRSES – ELECON Projekt wird speziell die Zusammenarbeit junger, europäischer und brasilianischer Wissenschaftlicher gefördert. Im Vordergrund der Untersuchungen stehen eine Potentialanalyse und Umsetzungskriterien für ein aktives Lastmanagement und die Identifikation der nichttechnischen Verluste. Weiterhin wird eine innovative Kommunikationsinfrastruktur mit angepassten dezentralen Modellen thematisiert, da sie eine wichtige Voraussetzung für die technische Realisierung des Smart Grids darstellen. Das ELECON – Projekt hat im Einzelnen folgende Ziele:, Konsolidierung eines internationalen Netzwerks von wissenschaftlichen Einrichtungen zwischen der EU und Brasilien, Nutzung von modernen Methoden und innovative Techniken zur Analyse des Stromverbrauchs und die Förderung der Energieeffizienz, Erwerb und Austausch von wissenschaftlichem Know-how zwischen der EU und Brasilien, Durchführung von Benchmark-Studien mit realen Daten, Etablierung einer starken Basis für zukünftige, langfristige Kooperationen., Die EU ist in einer guten Position, die Übermittlung des konsolidierten Fachwissens im Bereich der Energietechnik international zu fördern und somit weltweit schnelle, effektive Veränderungen in diesem Bereich voranzutreiben. Brasilien ist ein sehr wichtiger Partner mit einzigartigen Netzstrukturen und Erfahrungen im Bereich der Energietechnik. Das komplementäre Know-how und das hohe wissenschaftlichen Niveau, das durch das Austauschprogramm unterstützt wird, werden zu qualitativ hochwertigen Ergebnisse führen und die Grundlage für eine dauerhafte Zusammenarbeit schaffen. Leiter/-in: Prof. Dr.-Ing. habil. Zbigniew Antoni Styczynski View project in the research portal
2012 bis 2016 EU - FP7 IRSES-ELECON: Internationale Vernetzung unterstützt die Smart Grid Entwicklung Eine zeitnahe und erfolgreiche Konzeptionierung und Umsetzung eines Smart Grids, das eine intelligente Vernetzung aller Akteure im elektrischen Versorgungsnetz durch innovative Kommunikationstechnologien bedeutet, erfordert eine starke Zusammenarbeit der weltweiten Kompetenzen und die Förderung des wissenschaftlichen Nachwuchses. Innerhalb des IRSES ELECON Projekt wird speziell die Zusammenarbeit junger, europäischer und brasilianischer Wissenschaftlicher gefördert. Im Vordergrund der Untersuchungen stehen eine Potentialanalyse und Umsetzungskriterien für ein aktives Lastmanagement und die Identifikation der nichttechnischen Verluste. Weiterhin wird eine innovative Kommunikationsinfrastruktur mit angepassten dezentralen Modellen thematisiert, da sie eine wichtige Voraussetzung für die technische Realisierung des Smart Grids darstellen. Das ELECON Projekt hat im Einzelnen folgende Ziele:, o   Konsolidierung eines internationalen Netzwerks von wissenschaftlichen Einrichtungen zwischen der EU und Brasilien, o   Nutzung von modernen Methoden und innovative Techniken zur Analyse des Stromverbrauchs und die Förderung der Energieeffizienz, o   Erwerb und Austausch von wissenschaftlichem Know-how zwischen der EU und Brasilien, o   Durchführung von Benchmark-Studien mit realen Daten, o   Etablierung einer starken Basis für zukünftige, langfristige Kooperationen., Die EU ist in einer guten Position, die Übermittlung des konsolidierten Fachwissens im Bereich der Energietechnik international zu fördern und somit weltweit schnelle, effektive Veränderungen in diesem Bereich voranzutreiben. Brasilien ist ein sehr wichtiger Partner mit einzigartigen Netzstrukturen und Erfahrungen im Bereich der Energietechnik. Das komplementäre Know-how und das hohe wissenschaftlichen Niveau, das durch das Austauschprogramm unterstützt wird, werden zu qualitativ hochwertigen Ergebnisse führen und die Grundlage für eine dauerhafte Zusammenarbeit schaffen. Leiter/-in: Martin Wolter View project in the research portal
2010 bis 2015 EU - FP7 EUTRAF: Ätiologie-basierte Mechanismen von Vorhofflimmern (WP3) Die Studie wird im Rahmen eines EU-Projektes: EUTRAF (European Network for Translational Research in Atrial Fibrillation) durchgeführt. Das Ziel des Projektes ist die Aufklärung der Mechanismen der Entstehung des Vorhofflimmerns, die Identifikation der klinisch relevanten Biomarkern und die Entwicklung neuer Therapiekonzepte., Annährend 90% der Vorhofflimmern (VHF)-Patienten zeichnen sich durch das Vorhandensein der begleitenden Krankheiten, wie Diabetes Mellitus (DM), Hypertension aus. Die Charakterisierung der ätiologie-basierten, strukturellen Veränderungen im Vorhofmyokard bei Patienten mit VHF, als auch die Untersuchung der neuen Therapiekonzepte steht im Vordergrund dieses Vorhaben., Für diese Studie wird eine Sammlung von humanen, rechten Herzohren mit einem besonderen Fokus auf VHF-Patienten mit DM-Typ II und Hypertension geplant. Darüber hinaus stellt das humane Vorhofgewebe ein einzigartiges Material für die Gewebekultur dar. Das Kultivieren von humanen, atrialen Gewebeschnitten, als auch die elektrische Stimulation (in vitro VHF-Modell) der Vorhofschnitte wurde in unserer Gruppe entwickelt und etabliert. Darüber hinaus, werden für jede Art der Ätiologie, etablierte Tier Modellen (SHR-Ratte, ZDF-Ratte, Diabetes II-Schweine) verwendet. Leiter/-in: Prof. Dr. Andreas Goette View project in the research portal
2011 bis 2014 EU - FP7 CORONET - Novel interfaces between brain and computer Interfaces between the brain and electrical circuits in technical devices or computers open new perspectives for basic research and medical application, e.g., for therapeutic brain stimulation and neuroprosthetics. The new EU project CORONET will develop the technological and theoretical foundations for such future "bio-hybrid" interfaces between biological and artificial nervous tissues., The European Commission supports CORONET with 2.7 Mio. from the 7th Framework Program. Within the category "Brain-inspired Computing", CORONET received the best rating out of all 39 concurring project proposals. The key idea of CORONET is to work with, not against, the complex spontaneous activity of living nervous tissues. The project will first "gently steer" the spontaneous activity into a desired direction by applying continuous, weak electrical stimulation. Then, the nervous tissue will be coupled to artificial, electronic networks that show a behavior as complex as that of the living brain. By aid of this coupling, the scientists will try to "read out" natural, spontaneously arising activity states in the nervous tissue., In a first step, computer simulations will serve as artificial neural networks. In a second step, the researchers will apply custom-built advanced integrated circuits that operate based on principles of the brain ("neuromorphic VLSI"). The final goal of the project is to seamlessly interface "silicon-" and living nervous tissues., The project involves senior scientists from Magdeburg, Dresden, Trieste, Rome, Haifa, and Barcelona and is led by Prof. Jochen Braun (Otto von Guericke University Magdeburg). It builds on previous research performed in the Bernstein Group Magdeburg, coordinated also by Prof. Braun and funded by the German Federal Ministry of Education and Research (BMBF)., Contact Information, Prof. Jochen Braun, Institut für Biologie, Otto von Guericke University Magdeburg, Leipziger Str. 44, 39120 Magdeburg, Germany, Phone: +49 391 67 55 050, , more information, http://kobi.nat.uni-magdeburg.de, - Cognitive Biology Group, http://www.bgcn.ovgu.de/, - Bernstein Group Magdeburg Leiter/-in: Jochen Braun View project in the research portal
2011 bis 2014 EU - FP7 KARYON - Kernel-based ARchitecture for safetY-critical cONtrol Die Forschungsarbeiten der OVGU werden an der FIN am Lehrstuhl Eingebettete Systeme und Betriebssysteme (EOS) im Institut für Verteilte Systeme (IVS) durchgeführt. Projektleiter ist Prof. Dr. Jörg Kaiser: Wir stehen an der Schwelle, an der autonome und teilautonome mobile Systeme in öffentlichen Räumen genutzt werden. Intelligente kooperierende Fahrzeuge, die ihr Verhalten ohne die Intervention des Fahrers koordinieren, eröffnen die Möglichkeit, die bestehende Verkehrsinfrastruktur besser zu nutzen. Dadurch kann Mobilität erhalten werden, ohne immer neue Flächen für Verkehrsinfrastrukturen opfern zu müssen. Unbemannte Flugzeuge können im Umweltbereich zur Beobachtung ausgedehnter Ökosysteme oder zur Überwachung von Aschewolken eingesetzt werden, wie sie in jüngster Zeit durch Vulkanausbrüche entstanden sind. Da Verkehrsflächen oder der Luftraum mit anderen Systemen gemeinsam genutzt werden, müssen autonome Systeme in der Lage sein, ihre Umgebung korrekt wahrzunehmen und mit anderen Systemen sicher zu kooperieren. Im Moment dürfen autonome System aber entweder gar nicht oder nur unter erheblichen Einschränkungen im öffentlichen Raum eingesetzt werden, weil das Risiko eines Unfalls aufgrund eines Systemversagens mit schwerwiegenden Auswirkungen nicht mit genügender Sicherheit ausgeschlossen werden kann., KARYON widmet sich der Frage, wie solche Systeme sicherer gemacht werden können und erforscht grundlegende Systemstrukturen für vorhersagbare und sichere Koordination intelligenter mobiler Systeme in einer offenen, ungewissen Umwelt. Dies ist ein ambitioniertes Ziel, weil auf der einen Seite immer komplexere Komponenten für die Umgebungswahrnehmung, Fahrzeugkontrolle und zur drahtlosen Kommunikation verfügbar sind. Sie steigern die Leistungsfähigkeit solcher Systeme beträchtlich. Auf der anderen Seite bringt die erhöhte Komplexität auch neue Sicherheitsrisiken mit sich. Dieser Zielkonflikt erfordert innovative Lösungen in  zwei Hauptrichtungen. Der erste Bereich widmet sich der Verfügbarkeit. Es bedeutet, dass eine hohe Systemleistung trotz Komponentenausfällen, Netzüberlastung und Umgebungsunsicherheiten aufrechterhalten werden soll. Hier werden neue Wege für fehlertolerante verteilte Kontrollverfahren untersucht. Der zweite Bereich ist die Bereitstellung eines Sicherheitskerns. Hier geht es darum, gefährliche Aktivitäten oder Situationen unter allen Umständen auszuschließen. Der Sicherheitskern überwacht alle Aktionen des mobilen Systems und garantiert ein vorhersehbares, sicheres Verhalten. Was ein sicheres Verhalten bedeutet, ist dabei an der jeweiligen Anwendung und Situation orientiert und erfordert die Durchsetzung festgelegter Verhaltensregeln trotz einer breiten Palette von Ungewissheiten der Umgebungswahrnehmung sowie Systemfehlern, Ausfällen und unsicheren Kommunikationsnetzen. Leiter/-in: Jörg Kaiser View project in the research portal
2010 bis 2014 EU - FP7 Euro-BioImaging - Research infrastructure for imagingtechnologies in biological and biomedical sciences (Preparatory Phase) MI - Access to Innovative TechnologiesThe objectives of, WG Access to Innovative Technologies - Medical Imaging, (MI) are, To survey existing European infrastructure enabling innovative MI technologies., To identify the needs of the scientific community with regard to instrument developments and access to the identified innovative MI technologies including Ultra-High Field MR (UHF-MR), Novel X-ray based Phase-Contrast Imaging (PCI) and Emerging Imaging Technologies (EIT) such as combination of MR and PET, SPECT, or MEG (MR-PET, MR-SPECT, MEGMR), Electron Paramagnetic Resonance Imaging (EPRI), and Magnetic Particle Imaging (MPI)., To search for additional emerging MI developments, which may be considered for inclusion in the forward planning of Euro-BioImaging infrastructure., To determine the bottlenecks for providing access to innovative MI technologies., To explore the feasibility of providing access to the identified innovative MI technologies by proof-of-concept studies., To develop a comprehensive, long-term plan for the implementation of European access to innovative MI technologies. Leiter/-in: Oliver Speck View project in the research portal
2012 bis 2014 EU - FP7 Marie Curie IEF: Touch and Action To respond to a touch, it is often necessary to localize it in space, and not just on the skin. The computation of this external spatial location involves the integration of somatosensation with visual and proprioceptive information about current body posture. Failures in the encoding of this external mapping would prevent us from retrieving the correct location of tactile events, impairing normal interactions with the environment. It would be like feeling the tickle of an insect on the skin, without knowing where to reach out to swat it away. The aim of the current project is to elucidate the mechanisms whereby self-generated movements and preceding tactile information is used by the remapping system to improve tactile localization. Leiter/-in: Elena Azanon Gracia View project in the research portal
2009 bis 2013 EU - FP7 Interplay: Interaktion von mikrobieller Besiedelung und Darmfunktion während der postnatalen Entwicklung des Schweines: Innovative Wege zu einer nachhaltigen Tierproduktion Tierhaltung erfolgt normalerweise nicht unter spezifiziert-pathogenfreien Bedingungen (SPF). Das Verbot von Antibiotika im Tierfutter (sog. Leistungsförderer), das die Europäische Union durchgesetzt hat, führt dazu, dass junge Schweine in der Aufzucht einer großen Anzahl von Bakterien ausgesetzt sind. Durch diese natürlichen Bedingungen muss sich der Organismus an die Umwelt anpassen und seine eigenen Abwehrmechanismen und eine effektive Darmfunktion entwickeln. Aber auch der Darm selbst reguliert die bakterielle Besiedlung - es kommt zu einer engen Interaktion zwischen Wirt und Darmbakterien - daher auch der Projektname ?Interplay?. Das Projekt wird einerseits die genaue Zusammensetzung der Darmbakterien charakterisieren, andererseits die Regulation des Darmepithels und des Abwehrsystems der Darmwand und des gesamten Organismus untersuchen. Wir wollen verstehen, wie die frühe Besiedlung des Darmes durch Bakterien die Gesamtentwicklung des Tieres beeinflusst und erwarten, dass bei genauer Kenntnis dieser Prozesse eine nachhaltige Tierhaltung ermöglicht wird. Leiter/-in: Prof. Dr. Hermann-Josef Rothkötter View project in the research portal
2010 bis 2013 EU - FP7 Embedded Optimization for Resource Constrained Platforms There is enormous economic potential for the application of embedded optimization technologies in embedded systems design. Recent advances in the performance of embedded hardware platforms, in combination with fundamental improvements in optimization theory and algorithms, have opened the door to widespread applications over the next decade. Embedded optimization will enable huge energy and resource savings, increased safety, and improved fault detection across a wide a range of industrial applications in the mechatronic, automotive, process control and aerospace sectors. In order to realize the full potential of optimization in embedded systems, their design must also be supported by a focussed set of tools enabling the rapid transfer of novel high-performance algorithms to practical applications. The EMBOCON consortium will enable widespread application of real-time optimization in embedded systems through:, Tailoring of customized numerical algorithms to increase their robustness and efficiency on embedded systems, Enabling real-time optimization on cheap industry-standard hardware platforms, Defining a common user interface for optimization technologies to facilitate technology transfer to industry, and, Performing challenging case studies in cooperation with industrial partners to demonstrate technological maturity., The EMBOCON consortium will strengthen a network of world-leading academic and industrial partners with complementary expertise in control, optimization and embedded systems in a range of industrial applications. Particular emphasis is placed on close collaboration between mathematical algorithm developers, control theorists, hardware specialists and industrial application engineers. The network will consolidate and extend Europe’s position as the world research leader in these areas and foster strong collaborative links between European academia and industry. Leiter/-in: Sebastian Sager View project in the research portal
2010 bis 2013 EU - FP7 Center for Excellence for Modern Composites Applied in Aerospace and Surface Transport Infrastructure (FP7 - 245479 CEMCAST) The project aims at continuation and advancement of activities initiated in FP6 ToK project MTKD ? CT - 2004 ? 014058 at the Centre for Modern Composite Materials (CMCM) created at the Lublin University of Technology (LUT). It is planned: a) to unlock and develop the full research potential and increase research capacities of the CMCM staff in the areas of competence comprising modelling of composite and smart materials and their applications to aerospace and  transport infrastructure (pavements and airfields), also modelling and control of dynamics of structures made of composites b) to establish new areaof competence: innovative technologies for manufacturing of composites, c) to upgrade research equipmentfor testing of composite materials. The project objectives will be accomplished by a coherent set of the following complementary actions: twinning collaboration, recruitment of experienced researchers, organisation of workshops and mini-symposia, participation in international conferences, purchase of equipment. The project implementation will result in creating a leading research centre in the Middle-East part of Europe in the multidisciplinary area encompassing modelling and experimental testing of composite and smart materials and their application to aircrafts, pavements and airfields. The proposed project will strengthen co-operation with the regional industry, in terms of socio-economic aspects: will help to compensate disproportion (Lublin region is a less favoured one). It is also envisaged that the project will increase visibility and competitiveness at international level of the CMCM in the field of composite materials and their applications to engineering structures, resulting in deeper involvement of the CMCM in FP7 projects and better integration of the CMCM in the ERA. Leiter/-in: Holm Altenbach View project in the research portal
2008 bis 2013 EU - FP7 SYBILLA - Systems Biology of T-cell Activation in Health and Disease T-cell activation, whether induced by pathogens or auto-antigens, is a complex process relying on multiple layers of tightly controlled intracellular signalling modules that form an intricate network. Defects in this network can cause severe and chronic disorders such as autoimmune diseases. Although 5% of the population suffer from these diseases, only a few therapeutic, treatments are available. To a large extent this is attributed to the lack of systems-level insights, which would provide concepts of how to modulate T-cell activation. The SYBILLA project groups 14 partners from 9 different EU countries, including 3 SMEs. Through a multidisciplinary effort it aims to understand at the systems level, how T-cells discriminate, foreign from auto-antigens. Towards this goal, a transgenic mouse system will be used as a tractable physiological model. Data will be validated in human T-cells and a humanised mouse model for multiple sclerosis. SYBILLA will develop technological and mathematical tools to generate and integrate high-density quantitative data describing T-cell activation., Proteomics, transcriptomics, metabolomics, imaging and multiplexed biochemical techniques will be applied to obtain holistic maps of T-cell signalling networks and to achieve a quantitative understanding of the network and its regulation in response to different inputs. Building upon our existing network model, constant iterations will be used to develop more robust dynamic, models to describe the network s response to perturbations. This will culminate in the generation of a Virtual T-Cell, allowing computer simulation to refine the predictability of physiological and pathophysiological reactions. SYBILLA s impact on EU biopharmaceutical competitiveness will be enormous through identification of new pharmacologic targets, optimised prediction of immunomodulatory drug efficacy, discovery of new concerted biomarkers and improvement of personalised medication for treating autoimmune diseases. Leiter/-in: Jonathan Lindquist View project in the research portal
2009 bis 2013 EU - FP7 TAILoring photon-phonon interaction in silicon PHOXonic crystals TAILPHOX project addresses the design and implementation of silicon phoXonic crystal structures that allow a simultaneous control of both photonic and phononic waves. The final goal is to push the performance of optical devices well beyond the state of the art by this radically new approach. By merging both fields (nanophotonics and nanophononics) within a same platform, novel unprecedented control of light and sound in very small regions will be achieved. The project will cover from the development of theoretical and numerical tools to deal simultaneously with light and sound to the application to three high-impact scenarios in the field of ICT: i) phonon-assisted light emission in silicon, ii) control of photon speed (delay and storage) by stimulated Brillouin scattering (SBS) in silicon photonic chips, and iii) realization of highly-sensitive dual phoXonic sensors. Leiter/-in: Prof. i. R. Peter Hauptmann View project in the research portal
2010 bis 2012 EU - FP7 WEB to Energy (W2E) Die Entflechtung des Energiemarktes erfordert neue Geschäftsmodelle und neue integrative Methoden zur Optimierung der gesamten Wertschöpfungskette. Die Realisierung des europaweiten elektrischen Netzes der Zukunft macht die Umsetzung einer offenen, allgemein zugänglichen und genormten IKT-Infrastruktur erforderlich, so dass alle beteiligten Marktteilnehmer diskriminierungsfrei mit den notwendigen Informationen versorgt werden. Das Projekt WEB to Energy (W2E) hat das Ziel, diese offene, allgemein zugängliche und genormte IKT-Infrastruktur zu entwickeln. Der Grundgedanke hierbei ist die konsistente, gleichartige und einheitliche Anwendung von weltweit anerkannten IEC-Standards, insbesondere für Kommunikationsprotokolle (IEC 61850), IKT-Sicherheit (IEC TS 62351) und Datenverwaltung mittels CIM (IEC 61970). Im Projekt W2E werden Schnittstellen zwischen allen drei Ebenen entwickelt und auf diese Art und Weise ?plug and play?-Fähigkeiten und Kompatibilität realisiert. Somit wird im Projekt W2E ein nahtloser Ansatz für die Standardisierung von der Prozessebene, über die IKT-Infrastruktur bis zur Steuerungsebene gewährleistet. Im Rahmen von Feldtests werden folgende Schlüsselelemente umgesetzt und demonstriert:  1. Integration der Nutzer: verbesserte Effizienz der Energieerzeugung, um Energieeinsparungen zu erzielen und Spitzenlasten abzufedern und somit niedrigere Systemkosten und eine verbesserte Integration von erneuerbaren Energien zu erreichen., 2. Aktive Verteilungsnetze: Flexible und rekonfigurierbare Zusammenfassung und Verwaltung dezentraler, sicherer und unsicherer (fluktuierender) Einspeiser, Speicher und steuerbarer Lasten in virtuellen Kraftwerken, um ein Optimum an ökologischem und ökonomischen Betrieb zu erreichen. 3. Selbstheilungs-Fähigkeiten für die Verteilungsnetze, basierend auf den Möglichkeiten der IKT-Infrastruktur und einer automatisierten Fehlerklärung in Mittelspannungsanlagen und somit die Erhöhung der Versorgungssicherheit Leiter/-in: Prof. Dr.-Ing. habil. Zbigniew Antoni Styczynski View project in the research portal
2010 bis 2012 EU - FP7 CAMEL-MCG (Development of Higly Eficient and Environmentally Friendly Grinding Technology Through a Minimum coolant approach) CAMEL-MCG aims to develop a complete technical solution for reducing the need of flood lubricant in grinding processes by means of the, minimum quantity lubrication, approach., The main objective of the project is to achieve a drastic reduction of coolant consumption in the grinding process (between 500 and 1000 times lower than current systems)., As a result of the application of Minimum Coolant Grinding technology (MCG), also the power consumption will be reduced by 50%; the waste production will be reduced by 40% and the occupied floor space will be 25% lower. These are estimated average values, as the results of the application of this new technology could be different for the several components machined by grinding operation (according to dimensions, precision requirements and productivity of the components to be reduced). In order to try to quantify and explore the potential of the new technology at the end of the project, a pilot process well-known by ESTARTA and IDEKO has been selected as validation test case. Once success will be achieved in this pilot process, its translation to other grinding processes will be almost immediate. Leiter/-in: Florian Welzel View project in the research portal
2008 bis 2012 EU - FP7 MICROFLEX - Micro fabrication production technology for MEMS on new emerging smart textiles/flexibles The project concerns flexible materials in the form of high added value smart fabrics/textiles which are able to sense stimuli and react or adapt to them in a predetermined way. The challenge for the European textile industries is to add advanced functions to textiles and the recent progress of new technologies such as electronic inks provide an opportunity for a breakthrough by incorporating MEMS on flexible textiles/fabrics. The project will exploit microfabrication to produce, using custom printing processes, active functions cost efficiently. We propose to develop fundamental micro fabrication production technologies for MEMS on fabrics/textiles using flagship demonstrator applications. This will result in a cheap, easy to design, flexible, rapid, way to manufacture multifunction smart textiles/garments for a large set of multi-sectorial applications. The project will undertake a number of initial demonstrators of the underlying basic technology. These will be based on: light emission, cooling/heating, anti-static effect, gas sensing, energy harvesting, micro-encapsulation and actuation. Leiter/-in: Prof. i. R. Peter Hauptmann View project in the research portal
2010 bis 2012 EU - FP7 EU Marie-Curie-ITN: Herstellung und grundlegende Eigenschaften von Indiumnitrid und indiumreichen Legierungen (RAINBOW); Teilprojekt (OvGU): Halbleiter-Elektrolytkontakte für Sensorik Indiumnitrid (InN) besitzt unter allen Nitridhalbleitern die kleinste Bandlücke. Erst seit wenigen Jahren ist bekannt, dass diese nicht im sichtbaren sondern im infraroten Spektralbereich liegt. Dies eröffnet neue Anwendungsfelder der Nitride. Ein Konsortium aus 14 europäischen Universitäten und Forschungseinrichtungen hat es sich zum Ziel gestellt, zum einen die Herstellung  von InN und seinen Legierungen mit GaN und AlN deutlich zu verbessern und zum anderen grundlegende elektronische und optische Eigenschaften des Materialsystems zu untersuchen. Auf dieser Basis sollen erste Demonstratoren neuartiger Bauelemente realisiert werden. Leiter/-in: Prof. Dr. Martin Feneberg View project in the research portal
2008 bis 2012 EU - FP7 High quality material and intrinsic properties of InN and indium rich nitride alloys - (the RAINBOW ITN) Indium nitride is a new narrow gap semiconductor (<0.7 eV), which, alloyed with GaN (3.5 eV) and AlN (6.2 eV), will allow the spectral range from telecom to hard UV wavelengths to be covered. This narrow band gap makes InN an exciting material from which to develop the highest efficiency solar cells. Moreover, due to an electron mobility of around 4000 cm2/Vs and very high saturation velocities, InN is an ideal material for the development of high electron mobility devices capable of operating in the Terahertz range. To ensure the production of reliable commercial devices, rigorous fundamental research is required to understand the layer growth mechanisms and optimize material properties. In the RAINBOW academic and industrial consortium, the theoretical work will encompass modelling of the atomic structure and properties of the material from empirical potentials to ab initio techniques. Experiments will provide correlated structural, electronic, optical and chemical information from the nano to the macroscopic scale. In a closely concerted effort, we will determine the best conditions for the growth of highest quality InN and In rich (In,Ga,Al)N alloys by the main growth techniques (MOVPE, PAMBE, and HVPE). Under the supervision of world leading experts, numerous ER/ESRs will directly benefit from this interdisciplinary and multisectorial research and training effort. The ER/ESRs involved in this programme will also learn to manage research and industrial projects. Leiter/-in: Prof. Dr. habil. Rüdiger Goldhahn View project in the research portal
2008 bis 2012 EU - FP7 ECRYPT II – Associated Membership Uni-MD The main goal of ECRYPT II is to strengthen and integrate research in cryptology in Europe and decrease fragmentation by creating a research infrastructure and by organising research into virtual laboratories, thereby establishing a joint research agenda and executing joint research in cryptology related areas., The researchers cooperating in ECRYPT II aim at the improvement of the, state of the art in practice and theory of cryptology by:, Improving the understanding of existing algorithms and protocols, Expanding the theoretical foundations of cryptology, Developing better cryptographic algorithms, protocols and implementations in the following respects: low cost, high performance and high security., To achieve these goals within the project a joint infrastructure is developed, which includes: tools for the evaluation of cryptographic algorithms, a benchmarking environment for cryptographic hardware and software, infrastructure for side channel analysis measurements and tools. Leiter/-in: Prof. Dr.-Ing. Jana Dittmann View project in the research portal
2009 bis 2012 EU - FP7 SemSeg - 4D Space-Time Topology for Semantic Flow Segmentation The thorough analysis of flows plays an important role in many different processes, such as airplane and car design, environmental research, and medicine. Scientific Visualization and its subfield flow visualization have provided a variety of techniques for the domain experts to visually analyze large and complex flow data sets. Among them, so-called topological methods play an important role., Vector field topology (VFT) is a mathematically rigorous theory that reveals the essential structure of a static vector field. However, this approach is only fully valid for static vector fields. Recent developments in the target domains of this project show a clear transition from steady to unsteady flow scenarios. Accordingly, we have to see that the traditionally proven approaches do not apply anymore and that a conceptual change in the methodology of visual analysis is necessary. Topological methods which account for the complete dynamic behaviour of flow fields are strongly needed but do not exist. Steps toward this goal have been done from several sides, delivering prom-ising but yet only partial results. It is the objective of this project to research a new segmentation method for unsteady flows that has the elegance and specificity of (steady) VFT, but which provides correct results for unsteady flows as well. Leiter/-in: Prof. Dr. Holger Theisel View project in the research portal
2010 bis 2012 EU - FP7 Rapport - Building Rapport between Small and Medium Sized Enterprises and Public or Private Research Capabilities SMEs' strengths lie in their agility, imagination and customer interaction. However capitalizing on these strengths requires focused policy action to overcome the significant barriers they face either from inside or from outside. To be effective, these policies should be able to reach a large proportion of SMEs and tailor their actions to the various types of SMEs and their particular needs. This project aspires to advance this cause by fulfilling the following objectives:, To develop a reference guide of good practices including benchmarks for strengthening the knowledge exchange and knowledge transfer between research organizations and various kinds of SMEs; under the term good practices, the reference guide will refer to the specific services offered and the deployed programmes as well as the relevant policies., To develop a blueprint paper on new emerging forms of SMEs support for research backed by large corporations in a context where open innovation and public-private partnerships have increasingly gained importance; the paper will include benchmarks for private initiatives and public private partnerships of different kinds to support research activities within small businesses in different industries (e.g. consumer goods, IT, pharmaceuticals)., To initiate the engagement of policy-makers and other relevant stakeholders (see Table 16) into a dialogue and ensure the 'translation' of the reference guide and the blueprint paper into a roadmap for embedding the more suitable practices and policies into the European Research Area and the policy making at both regional and national levels., The project considers not only the engagement of SMEs into the research process but also enabling SMEs to access developed knowledge and competencies of the research community. In addition to the science-push programmes, it looks into the demand-pull initiatives where the focal SME drives the process. The work puts a strong emphasis on the SMEs of lower absorptive capacity and how to open up their horizons to external research capabilities. Our hypothesis is that if Europe manages to upgrade a significant part of those SMEs, the economic and social benefits will be enormous., www.rapport-project.eu Leiter/-in: Michael Schenk View project in the research portal
2007 bis 2011 EU - FP7 SHAMAN – Sustaining Heritage Access through Multivalent Archiving SHAMAN ist ein Integriertes Projekt im Themenbereich Informations- und Kommunikationstechnologien (IKT) des 7. Rahmenprogramms der EU. Bei der ersten IKT-Ausschreibung wurde es unter 1.800 Einsendungen mit einer Bewertung von 97% akzeptiert und gilt als Flaggschiffprogramm in der digitalen Langzeitarchivierungsdomäne., Ziel ist die Erstellung eines Rahmenwerks für digitale Langzeitarchivierungssysteme (mehr als 100 Jahre) der nächsten Generation, die Implementierung eines Referenzsystems aufbauend auf einem Datengrid, sowie die Entwicklung von Werkzeugen zur Analyse, Aufnahme, Verwaltung, Zugriff und die Wiederverwendung von Informationen über verteilte Archive hinweg., Die im ersten Schritt gewonnenen Erkenntnisse des entwickelten Rahmenwerkes werden anschließend an Hand von 3 Anwendungsdomänen prototypisch überprüft: wissenschaftliche Publikationen und parlamentarische Archive, industrielles Design und Konstruktion (CAD), sowie wissenschaftliche Anwendungen (eScience)., Endanwender und Projektpartner sind u.a. die Niedersächsische Staats- und Universitätsbibliothek, die Deutsche Nationalbibliothek, Philips und Xerox., Erstmals spielen Sicherheitslösungen bei der digitalen Langzeitarchivierung eine tragende Rolle. Dieser Part wird innerhalb des Projektes von der Arbeitsgruppe Multimedia & Security übernommen. Unsere Aufgaben umfassen damit:, die Charakterisierung von Richtlinien zur Durchsetzung von Sicherheitsmechanismen, wie Integrität und Authentizität der Daten als auch der gesamten Infrastruktur, die Entwicklung von Werkzeugen zur Durchsetzung und, die Spezifikation von Assessmentkriterien zur Überprüfung der gesamten Infrastruktur. Leiter/-in: Prof. Dr.-Ing. Jana Dittmann View project in the research portal
2008 bis 2011 EU - FP7 Bisociation Networks for Creative Information Discovery (BISON) The concept of association is at the heart of many of today's powerful ICT technologies such as information retrieval and data mining. These technologies typically employ association by similarity or co-occurrence to discover new information relevant to the evidence already known to the user. However, association techniques fail to discover relevant information that is not related in obvious associative ways, in particular information that is related across different contexts. It is these kinds of context-crossing associations that are often needed in innovative domains., Domains that are characterized by the need to develop innovative solutions require a form of creative information discovery from increasingly complex, heterogeneous and geographically distributed information sources. These domains, including design and engineering (drugs, materials, processes, devices), areas involving art (fashion and entertainment), and scientific discovery disciplines, require a different ICT paradigm that can help users to uncover, select, re-shuffle, and combine diverse contents to synthesize new features and properties leading to creative solutions. People working in these areas employ creative thinking to connect seemingly unrelated information, for example, by using metaphors or analogical reasoning. These modes of thinking allow the mixing of conceptual categories and contexts, which are normally separated. The functional basis for these modes is a mechanism called bisociation., The main goal of the project is to develop a system(BISON) that makes use of these bisociation mechanisms. We anticipate that the BISON system will provide truly creative solutions in an interactive environment that implements novel knowledge integration, network visualisation and machine learning methods to aid creative discovery. BISON builds on widely researched methodologies such as association rule learning, analogical, metaphoric and case-based reasoning. Leiter/-in: Prof. Dr. Andreas Nürnberger View project in the research portal
2001 bis 2004 EU - FP7 NOMAD - Autonomous Manufacture of Large Steel Fabrications NOMAD ist ein Projekt innerhalb des durch die EU geförderten 5. Rahmenprogramms. (G1RD-CT-2000-00461). Das Projekt nutzt einen 6-Achs-Roboterarm zum Schweißen von großen Stahlkonstruktionen geringer Fertigungsstückzahl bzw. hoher Fertigungsvarianz. Der Schweißarm befindet sich auf einer mobilen, autonomen Roboterplattform (RTV). So kann der Schweißroboter beliebig am Werkstück positioniert werden, teure und aufwendige Konstruktionen zur Werkstückpositionierung werden vermieden. Das RTV kann sich so um das Werkstück bewegen, dass alle Schweißnähte durch den Roboterarm erreicht werden. Die Erkennung von Lage und Orientierung des Werkstückes erfolgt durch ein über der Werkzelle montiertes optisches Sensorsystem. Ebenso wird die Position des RTV durch dieses Sensorsystem erfasst und mit den Navigationsdaten der RTV-Steuerung verknüpft. Die Generierung der Programme für Roboterarm (Schweißen) und RTV (Navigation) erfolgt automatisch in Verbindung mit den originalen CAD-Daten des Werkstückes, den real durch das Kamerasystem gemessenen Daten und einem Simulationstool., Das Konsortium, :, Fraunhofer IFF - Kamerasystem, RTV-Navigation, Caterpillar Belgium S.A (Belgien) - Endanwender, Delfoi OY (Finnland) - Simulationssystem, Robosoft SA (Frankreich) - Fertigung des RTV, TWI LTD (GB) - Forschungsorganisation für Schweißtechnologien, Reis Robotics (Deutschland) - Roboterarm, ESAB AB (Schweden) - Schweißprozess-Verbrauchsmaterialien, Nusteel Structures LTD (GB) - Endanwender Leiter/-in: Norbert Elkmann View project in the research portal

Last Modification: 14.06.2023 - Contact Person: Webmaster