https://www.ovgu.de/search

Publikationen

2018

Begutachteter Zeitschriftenartikel
Rößler, Christoph;  Schmicker, David;  Naumenko, Konstantin;  Woschke, Elmar 

Adaption of a Carreau fluid law formulation for residual stress determination in rotary friction welds
In: Journal of materials processing technology - Amsterdam [u.a.]: Elsevier, Bd. 252.2018, S. 567-572; http://dx.doi.org/10.1016/j.jmatprotec.2017.10.018

2017

Abstrakt
Popovych, Olha;  Bogomol, Iurii;  Naumenko, Konstantin;  Krüger, Manja 

Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system
In: Intermetallics 2017: International Conference, 02-06 October 2017, Educational Center Kloster Banz, Germany ; Programme and abstracts - Bad Staffelstein: Educational Center Kloster Banz, S. 115-116; http://www.intermetallics-conference.de/index.php?eID=tx_nawsecuredl&u=0&g=0&t=901511344548&hash=98078d2154a6b61b8ca85f1d7e2a72a1d402d8a9&file=fileadmin/congress/media/im2017/druckelemente/IM2017_Programme_Abstracts_978-3-9816508-9-1.pdf ; [Konferenz: Intermetallics 2017]

Begutachteter Zeitschriftenartikel
Aßmus, Marcus;  Nordmann, J.;  Naumenko, Konstantin;  Altenbach, Holm 

A homogeneous substitute material for the core layer of photovoltaic composite structures
In: Composites / B: an international journal - Amsterdam [u.a.]: Elsevier, Bd. 112.2017, S. 353-372; http://dx.doi.org/10.1016/j.compositesb.2016.12.042

Naumenko, Konstantin;  Eremeyev, Viktor A. 

A layer-wise theory of shallow shells with thin soft core for laminated glass and photovoltaic applications
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 178.2017, S. 434-446; http://dx.doi.org/10.1016/j.compstruct.2017.07.007

Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm;  Gariboldi, Elisabetta 

Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ, 2017; http://dx.doi.org/10.1177/0309324717699746

Chowdhury, H.;  Naumenko, Konstantin;  Altenbach, Holm 

Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, 2017; http://dx.doi.org/10.1016/j.ijmecsci.2017.06.019

Chowdhury, Helal;  Naumenko, Konstantin;  Altenbach, Holm;  Krüger, Manja 

Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
In: Archive of applied mechanics: (Ingenieur-Archiv) - Berlin: Springer, insges. 17 S., 2017; http://dx.doi.org/10.1007/s00419-017-1291-4

Aßmus, Marcus;  Bergmann, S.;  Naumenko, Konstantin;  Altenbach, Holm 

Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading
In: Composites communications - Amsterdam: Elsevier, Bd. 5.2017, S. 23-26; http://dx.doi.org/10.1016/j.coco.2017.06.003

Chowdhury, Helal;  Naumenko, Konstantin;  Altenbach, Holm;  Krüger, Manja 

Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
In: Materials science and engineering / A - Amsterdam: Elsevier, Bd. 700.2017, S. 503-511; http://dx.doi.org/10.1016/j.msea.2017.06.041

Chowdhury, Helal;  Altenbach, Holm;  Krüger, Manja;  Naumenko, Konstantin 

Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
In: Mechanics of advanced materials and modern processes - Berlin: Springer, Bd. 3.2017, insges. 20 S.; http://dx.doi.org/10.1186/s40759-017-0031-3

Buchbeitrag
Aßmus, Marcus;  Bergmann, Stefan;  Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm 

Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures
In: Mechanics for materials and technologies - Cham, Switzerland: Springer International Publishing, S. 73-122, 2017 - (Advanced structured materials; Volume 46); http://dx.doi.org/10.1007/978-3-319-56050-2_4

Nase, M.;  Rennert, M.;  Henning, S.;  Zankel, A.;  Naumenko, Konstantin;  Grellmann, W. 

Fracture mechanics characterisation of peelfilms
In: Deformation and fracture behaviour of polymer materials - Cham: Springer-Verlag, S. 271-281, 2017 - (Springer series in material science; 247); http://dx.doi.org/10.1007/978-3-319-41879-7_19

Popovych, Olha;  Naumenko, Konstantin;  Krüger, Manja 

Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln
In: 16. Sommerkurs Werkstoffe und Fügen: Magdeburg, 08. und 09. September 2017 - Magdeburg: Universitätsbibliothek, S. 185-192; http://nbn-resolving.de/urn:nbn:de:gbv:ma9:1-10156

Eremeyev, Viktor. A.;  Naumenko, Konstantin 

On the models of three-layered plates and shells with thin soft core
In: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials - Singapore: Springer Singapore, S. 159-171, 2017 - (Advanced Structured Materials; 59); http://dx.doi.org/10.1007/978-981-10-3797-9_9

Kostenko, Yevgen;  Naumenko, Konstantin 

Prediction of stress relaxation in power plant components based on a constitutive model
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines - New York, N.Y: American Society of Mechanical Engineers, 2017, Paper No. GT2017-63608, S. V008T29A017, insgesamt 8 S.; http://dx.doi.org/10.1115/GT2017-63608 ; [Konferenz: ASME Turbo Expo 2017, Charlotte, North Carolina, USA, 26-30 June, 2017]

Rezension
Naumenko, Konstantin;  Bobaru, Florin [Rezensierte Person] 

[Rezension von: Bobaru, Florin, Handbook of Peridynamic Modeling]
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 97.2017, 5, S. 616; http://dx.doi.org/10.1002/zamm.201709792

2016

Anderes Material
Altenbach, Holm;  Naumenko, Konstantin 

Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen
In: Rundbrief// Gesellschaft für Angewandte Mathematik und Mechanik, GAMM - Dresden: GAMM, 2, S. 4-10, 2016

Altenbach, Holm;  Lvov, G.;  Naumenko, Konstantin;  Okorokov, V. 

Consideration of damage in the analysis of autofrettage of thick-walled pressure vessels
In: Proceedings of the Institution of Mechanical Engineers / C. - London : Sage Publ, Bd. 230.2016, 20, S. 3585-3593

Publikationslink   

Begutachteter Zeitschriftenartikel
Aßmus, Marcus;  Naumenko, Konstantin;  Altenbach, Holm 

A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 158.2016, S. 340-358; http://dx.doi.org/10.1016/j.compstruct.2016.09.036

Gariboldi, Elisabetta;  Naumenko, Konstantin;  Ozhoga-Maslovskaja, Oksana;  Zappa, Emanuele 

Analysis of anisotropic damage in forged Al-Cu-Mg-Si alloy based on creep tests, micrographs of fractured specimen and digital image correlations
In: Materials science and engineering / A - Amsterdam: Elsevier, Bd. 652.2016, S. 175-185; http://dx.doi.org/10.1016/j.msea.2015.11.090

Nase, Michael;  Rennert, Mirko;  Naumenko, Konstantin;  Eremeyev, Victor A. 

Identifying tractionseparation behavior of self-adhesive polymeric films from in situ digital images under T-peeling
In: Journal of the mechanics and physics of solids - Amsterdam [u.a.]: Elsevier Science, Bd. 91.2016, S. 40-55; http://dx.doi.org/10.1016/j.jmps.2016.03.001

Chowdhury, Helal;  Altenbach, Holm;  Naumenko, Konstantin 

On the choice of the power law flow rule and its consequences in crystal plasticity
In: Key engineering materials - Aedermannsdorf: Trans Tech Publ, Bd. 725.2016, S. 359-365

Herausgeberschaft
Naumenko, Konstantin [HerausgeberIn];  Aßmus, Marcus [HerausgeberIn] 

Advanced Methods of Continuum Mechanics for Materials and Structures
In: Singapore Springer Singapore 2016, 1 Online-Ressource (555 p) - (Advanced Structured Materials; 60); http://dx.doi.org/10.1007/978-981-10-0959-4, ISBN 978-981-10-0959-4

Lehrbuch
Altenbach, Holm;  Altenbach, Johannes;  Naumenko, Konstantin 

Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
In: Berlin Heidelberg Springer Vieweg, 2016, 1 Online-Ressource (XIX, 531 Seiten), 167 Illustrationen; http://dx.doi.org/10.1007/978-3-662-47230-9, ISBN 978-3-662-47230-9

Wissenschaftliche Monographie
Naumenko, Konstantin;  Altenbach, Holm 

Modeling high temperature materials behavior for structural analysis. Part I: continuum mechanics foundations and constitutive models
In: Springer International Publishing, 2016, 1 Online-Ressource (XIII, 371 Seiten), Illustrationen - (Advanced structured materials; 28); http://dx.doi.org/10.1007/978-3-319-31629-1, ISBN 978-3-319-31627-7 ; [Description based upon print version of record]

2015

Begutachteter Zeitschriftenartikel
Eremeyev, Victor;  Naumenko, Konstantin 

A relationship between effective work of adhesion and peel force for thin hyperelastic films undergoing large deformation
In: Mechanics research communications. - Amsterdam [u.a.] : Elsevier, Bd. 69.2015, S. 24-26

Publikationslink   

Eisenträger, J.;  Naumenko, Konstantin;  Altenbach, Holm;  Meenen, J. 

A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 133.2015, S. 265-277; http://dx.doi.org/10.1016/j.compstruct.2015.07.049

Altenbach, Holm;  Laengler, Frank;  Naumenko, Konstantin;  Ievdokymov, Mykola 

Analysis of casting materials under thermal fatigue
In: Applied mechanics and materials : AMM. - [S.l.] : Scientific.Net, Bd. 784.2015, S. 95-103

Publikationslink   

Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm;  Köppe, Heinz 

Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels
In: International journal of mechanical sciences. - Amsterdam [u.a.] : Elsevier Science, 2015

Publikationslink   

Schmicker, David;  Paczulla, Stefan;  Nitzschke, Steffen;  Groschopp, Sven;  Naumenko, Konstantin;  Jüttner, Sven;  Strackeljan, Jens 

Experimental identification of flow properties of a S355 structural steel for hot deformation processes
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 50.2015, 2, S. 75-83

Publikationslink   

Altenbach, Holm;  Morachkovsky, Oleg;  Naumenko, Konstantin;  Lavinsky, Denis 

Inelastic deformation of conductive bodies in electromagnetic fields
In: Continuum mechanics and thermodynamics: analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, insges. 13 S., 2015; http://dx.doi.org/10.1007/s00161-015-0484-8

Ozhoga-Maslovskaja, Oksana;  Naumenko, Konstantin;  Altenbach, Holm;  Prygorniev, Oleksandr 

Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science; Vol. 96.2015, Part A, S. 178-184

Publikationslink   

Altenbach, Holm;  Eremeyev, Victor;  Naumenko, Konstantin 

On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer
In: ZAMM : journal of applied mathematics and mechanics. - Berlin : Wiley-VCH, Bd. 95.2015, 10, S. 1004-1011

Publikationslink   

Altenbach, Holm;  Naumenko, Konstantin;  Lvov, G.;  Sukiasov, V.;  Podgorny, A. 

Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band
In: Mechanics of composite materials. - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 51.2015, 2, S. 139-156

Publikationslink   

Buchbeitrag
Naumenko, Konstantin;  Altenbach, Holm 

Analysis of inelastic behavior for high temperature materials and structures
In: From creep damage mechanics to homogenization methods : a liber amicorum to celebrate the birthday of Nobutada Ohno, S. 241-298, 2015 - (Advanced structured materials; 64)

Publikationslink   

Altenbach, Holm;  Eisenträger, Johanna;  Naumenko, Konstantin 

Approximate rules for calculation of notch stresses considering plasticity and creep
In: Plastic behavior of conventional and advanced materials : theory, experiment, andmodeling ; proceedings of PLASTICITY\' 15: the twenty first International Symposium on Plasticity and its Current Applications. - Fulton, Md. : NEAT Press, S. 124-126, 2015 ; Kongress: PLASTICITY\' 15; 21 (Montego Bay, Jamaica) : 2015.01.04-09

Altenbach, Holm;  Girchenko, Anna;  Kutschke, Andreas;  Naumenko, Konstantin 

Creep behavior modeling of polyoxymethylene (POM) applying rheological models
In: Inelastic behavior of materials and structures under monotonic and cyclic loading. - Heidelberg [u.a.] : Springer, S. 1-5, 2015 - (Advanced structured materials; 57)

Publikationslink   

Dissertation
Prygorniev, Oleksandr;  Naumenko, Konstantin [Gutachter] 

Statistical analysis of stress and deformation state in polycrystalline aggregates with a large number of grains
In: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2015, VII, 117 S., Ill., graph. Darst.

2014

Begutachteter Zeitschriftenartikel
Längler, Frank;  Naumenko, Konstantin;  Altenbach, Holm;  Ievdokymov, Mykola 

A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428

Publikationslink   

Naumenko, Konstantin;  Eremeyev, Victor A. 

A layer-wise theory for laminated glass and photovoltaic panels
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 112.2014, S. 283-291

Publikationslink   

Naumenko, Konstantin;  Gariboldi, Elisabetta 

A phase mixture model for anisotropic creep of forged AlCuMgSi alloy
In: Materials science and engineering / A. - Amsterdam : Elsevier, Bd. 618.2014, S. 368-376

Publikationslink   

Lvov, Ivan;  Naumenko, Konstantin;  Altenbach, Holm 

Homogenisation approach in analysis of creep behaviour in multipass weld
In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53

Publikationslink   

Altenbach, Holm;  Beschetnikov, Dmitriy A.;  Lvov, Gennadiy I.;  Naumenko, Konstantin;  Sukiasov, Vladimir G. 

Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff
In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67

Publikationslink   

Buchbeitrag
Altenbach, Holm;  Kutschke, Andreas;  Naumenko, Konstantin 

Constitutive models for creep-damage behavior at quasi-static and cyclic loading
In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity \'14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69 ; Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08

2013

Abstrakt
Kutschke, Andreas;  Naumenko, Konstantin;  Altenbach, Holm 

A material model for describing the anomalous ratcheting effect of advanced chromium steels
In: CanCNSM 2013. - Montréal, insges. 2 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Naumenko, Konstantin;  Weps, Matthias;  Eremeyev, Victor;  Altenbach, Holm 

Analysis of laminates for photovoltaic appliacations
In: 8th German-Greek-Polish Symposium on recent advances in mechanics. - Univ. of Bremen, S. 59-60, 2013 ; Kongress: German-Greek-Polish Symposium on recent advances mechanics; 8 (Goslar) : 2013.09.09-13

Artikel in Kongressband
Schmicker, David;  Naumenko, Konstantin;  Strackeljan, Jens 

A holistic approach on the simulation of rotary-friction-welding
In: The 7th Asia-Pacific International IIW Congress. - Singapore, insges. 6 S., 2013 ; Kongress: Asia-Pacific International IIW Congress on Recent Development in Welding and Joining Technologies; 7 (Singapore) : 2013.07.08-10[vollständiger Beitrag auf CD-ROM]

Längler, Frank;  Naumenko, Konstantin;  Altenbach, Holm;  Ievdokymov, Mykola 

A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers
In: CanCNSM 2013. - Montréal, insges. 6 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Prygorniev, Oleksandr;  Naumenko, Konstantin 

Surface layer effects in polycrystalline structures under cyclic viscoplasticity
In: CanCNSM 2013. - Montréal, insges. 6 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Begutachteter Zeitschriftenartikel
Schmicker, David;  Naumenko, Konstantin;  Strackeljan, Jens 

A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model
In: Computer methods in applied mechanics and engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 265.2013, S. 186-194

Publikationslink   

Lvov, Ivan;  Naumenko, Konstantin;  Altenbach, Holm 

Micro-macro analysis of creep and damage behavior of multi-pass welds
In: Problemy mašinostroenija. - Kiev : Izd. \"Naukova Dumka\", Bd. 16.2013, 1, S. 31-38

Altenbach, Holm;  Kozhar, Sergii;  Naumenko, Konstantin 

Modeling creep damage of an aluminumsilicon eutectic alloy
In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, Bd. 22.2013, 5, S. 683-698

Publikationslink   

Eisenträger, Joahanna;  Naumenko, Konstantin;  Altenbach, Holm;  Lenz, Wolfgang 

Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80

Publikationslink   

Weps, Matthias;  Naumenko, Konstantin;  Altenbach, Holm 

Unsymmetric three-layer laminate with soft core for photovoltaic modules
In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339

Publikationslink   

Buchbeitrag
Schmicker, David;  Naumenko, Konstantin;  Strackeljan, Jens 

Ein robuster Ansatz zur Simulation des kontinuierlich angetriebenen Rotationsreibschweißprozesses
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 9 S., 2013 ; Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26

Eisenträger, Johanna;  Naumenko, Konstantin;  Altenbach, Holm;  Lenz, Wolfgang 

Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 10 S., 2013 ; Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26

Kostenko, Yevgen;  Almstedt, Henning;  Naumenko, Konstantin;  Linn, Stefan;  Scholz, Alfred 

Robust methods for creep fatigue analysis of power plant components under cyclic transient thermal loading
In: Proceedings of the ASME Turbo Expo 2013, Volume 5B: Oil and gas applications; steam turbines . - New York, N.Y : ASME, insges. 8 S.

Publikationslink   

2012

Buchbeitrag
Sturm, Daniel;  Heilmaier, Martin;  Naumenko, Konstantin;  Kozhar, Sergii;  Krüger, Manja 

Creep deformation characteristics of Al-rich Ti-Al alloys
In: Creep and fracture of engineering materials and structures. - the Japan Inst. of Metals, insges. 4 S., 2012 ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11); 12 (Kyoto, Japan) : 2012.05.27-31

Kutschke, Andreas;  Linn, Stefan;  Naumenko, Konstantin;  Scholz, Alfred 

Creep fatigue analysis of power plant components under transient thermal loading
In: Creep and fracture of engineering materials and structures. - the Japan Inst. of Metals, insges. 4 S., 2012 ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11); 12 (Kyoto, Japan) : 2012.05.27-31

Altenbach, Holm;  Kozhar, Sergii;  Naumenko, Konstantin 

Modeling creep ratcheting of an aluminum-silicon eutectic alloy
In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S. ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31

Originalartikel in begutachteter internationaler Zeitschrift
Schulze, Stefan-H.;  Pander, Matthias;  Naumenko, Konstantin;  Altenbach, Holm 

Analysis of laminated glass beams for photovoltaic applications
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036; http://dx.doi.org/10.1016/j.ijsolstr.2012.03.028

2011

Originalartikel in begutachteter internationaler Zeitschrift
Naumenko, Konstantin;  Altenbach, Holm;  Kutschke, Andreas 

A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature
In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597

Publikationslink   

Altenbach, Holm;  Eremeyev, Victor A.;  Kutschke, Andreas;  Naumenko, Konstantin 

Conservation laws and prediction methods for stress concentration fields
In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355

Publikationslink   

Naumenko, Konstantin;  Altenbach, Holm;  Kutschke, Andreas 

Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature
In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208

Publikationslink   

Naumenko, Konstantin;  Kutschke, Andreas;  Kostenko, Yevgen;  Rudolf, Thorsten 

Multi-axial thermo-mechanical analysis of power plant components from 9-12% Cr steels at high temperature
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668

Publikationslink   

Naumenko, Konstantin;  Kutschke, Andreas;  Kostenko, Yevgen;  Rudolf, Thorsten 

Multi-axial thermo-mechanical analysis of power plant components from 912% Cr steels at high temperature
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668

Publikationslink   

Naumenko, Konstantin;  Kutschke, Andreas;  Kostenko, Yevgen;  Rudolf, Thorsten 

Multi-axial thermo-mechanical analysis of power plant components from 9–12% Cr steels at high temperature
In: Engineering Fracture Mechanics

Originalartikel in begutachteter zeitschriftenartiger Reihe
Meenen, Johannes;  Altenbach, Holm;  Eremeyev, Victor;  Naumenko, Konstantin 

A variationally consistent derivation of microcontinuum theories
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)

Publikationslink   

Schulze, Stefan-H.;  Pander, Matthias;  Naumenko, Konstantin;  Girchenko, Anna;  Altenbach, Holm 

Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)

Publikationslink   

2010

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin;  Kozhar, Sergii 

Modelling of low cycle fatigue for an aluminum alloy at elevated temperature
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 22-24, 2010

Altenbach, Holm;  Kutschke, Andreas;  Naumenko, Konstantin 

Stress range dependent creep and damage - experimentel observations and their phenomenological description
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 55-57, 2010

2009

Artikel in Zeitschrift
Kröner, Carsten;  Altenbach, Holm;  Naumenko, Konstantin 

Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 45.2009, 3, S. 249-256

Kostenko, Y.;  Schwass, G.;  Naumenko, Konstantin 

Creep analysis of power plant components from 1% CRMOV and 10% CRMOV steels
In: OMMI. - Leatherhead, Surrey : European Technology Development, Bd. 6.2009, 2, S. 1-10

Publikationslink   

Naumenko, Konstantin;  Altenbach, Holm;  Gorash, Yevgen 

Creep analysis with a stress range dependent constitutive model
In: Archive of applied mechanics. - Berlin : Springer, Bd. 79.2009, S. 619-630

Altenbach, Holm;  Brigadnov, Igor A.;  Naumenko, Konstantin 

Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 10, S. 823-832

Naumenko, Konstantin;  Kostenko, Y 

Structural analysis of a power plant component using a stress-range-dependent creep-damage constitutive model
In: Materials science & engineering. - Amsterdam [u.a.] : ElsevierMaterials science and engineering / A, Bd. 510/511.2009, S. 169-174

Kröner, Carsten;  Altenbach, Holm;  Naumenko, Konstantin 

Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 45.2009, 3, S. 367-378

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin;  Gorash, Yevgen 

Creep analysis for a wide stress range based on stress relaxation experiments
In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008. - Singapore [u.a.] : World Scientific, S. 41-46, 2009

Naumenko, Konstantin;  Altenbach, Holm 

Modeling of stress range dependent creep and damage for the structural analysis
In: Creep & fracture in high temperature components. - Lancaster, Pa. : DEStech Publ., S. 974-984, 2009

2008

Artikel in Zeitschrift
Sukiasov, Vladimir;  Altenbach, Holm;  Naumenko, Konstantin 

Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 72.2008, S. 183-191

Altenbach, Holm;  Gorash, Yevgen;  Naumenko, Konstantin 

Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges
In: Acta mechanica. - Wien : Springer, Bd. 195.2008, S. 263-274

Konferenz/Aufsatz
Kostenko, Yevgen;  Naumenko, Konstantin 

Numerische Zeitstandanalyse einer Kraftwerkskomponente mit einem Kriechschädigungs-Werkstoffmodell
In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. - Düsseldorf : VDEh, S. 37-46, 2008

Monografiebeitrag
Altenbach, Holm;  Naumenko, Konstantin;  Renner, Barbara 

Fiber rotation motion in homogeneous flows
In: Micro-macro-interactions. - Berlin [u.a.] : Springer, S. 133-142, 2008

2007

Artikel in Zeitschrift
Altenbach, Holm;  Naumenko, Konstantin;  Pylypenko, Sergeii;  Renner, Barbara 

Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 87.2007, 2, S. 81-93

Altenbach, Holm;  Naumenko, Konstantin;  Gorash, Yegvgen 

Numerical benchmarks for creep-damage modeling
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH, Bd. 7.2007, S. 4040021-4040022, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/121371335/PDFSTART

Monografie
Naumenko, Konstantin;  Altenbach, Holm 

Modeling of creep for structural analysis - with 5 tables
In: Berlin [u.a.]: Springer, 2007. - XII, 220 S.: zahlr. graph. Darst. - (Foundations of engineering mechanics) ; Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications

Monografiebeitrag
Altenbach, Holm;  Naumenko, Konstantin 

Long term creep analysis of pipe bends in a steam transfer line at elevated temperature
In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2. - Stafa-Zürich [u.a.] : Trans Tech Publ., 2007, S. 795-802

2006

Artikel in Zeitschrift
Altenbach, Holm;  Naumenko, Konstantin 

A note on transversely-isotropic invariants
In: Zeitschrift für angewandte Mathematik und Mechanik . - Weinheim : Wiley-VCH, Bd. 86.2006, 2, S. 162-168

Altenbach , Holm;  Naumenko, Konstantin;  Pylypenko, S.;  Renner, Barbara 

Ausrichtung von Partikeln in stationären Strömungsfeldern
In: Proceedings in applied mathematics and mechanics . - Weinheim [u.a.] : Wiley-VCH, Bd. 6.2006, S. 423-424, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/114078368/PDFSTART!

Radusch, Hans-Joachim;  Kies, Torsten;  Altenbach, Holm;  Naumenko, Konstantin 

Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen
In: Zeitschrift Kunststofftechnik . - München : Hanser, Bd. 2.2006, 6, S. 1-21, unter URL: http://www.kunststoffe.de/directlink.asp?WAK060603

Altenbach, Holm;  Naumenko, Konstantin;  Pylypenko, Sergiy;  Renner, Barbara 

On the free particle rotation in a polymer melt
In: Strojnícky casopis . - Bratislava, Bd. 57.2006, 2, S. 112-126

Shutov, A. V.;  Altenbach, Holm;  Naumenko, Konstantin 

Steady-state creep analysis of pressurized pipe weldments by perturbation method
In: International journal of solids and structures . - New York, NY [u.a.] : Elsevier, Bd. 43.2006, S. 6908-6920

Habilitation
Naumenko, Konstantin 

Modeling of high-temperature creep for structural analysis applications
In: Halle, Univ., FB Ingenieurwiss., Habil.-Schr., 2006, unter URL: http://sundoc.bibliothek.uni-halle.de/habil-online/06/06H055/index.htm

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin 

Creep modeling and long term structural analysis of plates and shells
In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity & viscoplasticity, and metal forming ; proceedings of Plasticity \'06, the Twelfth International Symposium on Plasticity and its Current Applications . - Fulton, Md. : NEAT Press, ISBN 0-9659463-6-3, 2006, S. 580-582

Altenbach, Holm;  Naumenko, Konstantin 

Power plant component design using creep-damage analysis
In: Proceedings of 2006 ASME International Mechanical Engineering Congress & Exposition . - New York : ASME, ISBN 0-7918-3790-4, S. 1-10

2005

Artikel in Zeitschrift
Naumenko, Konstantin;  Altenbach, Holm 

A phenomenological model for anisotropic creep in a multipass weld metal
In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819

Altenbach, Holm;  Naumenko, Konstantin 

Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva
In: Vestnik Nacional\'nogo Techniceskogo Universiteta \"ChPI\". - Char\'kov : Univ., 2005, S. 57-66

Renner, Barbara;  Altenbach, Holm;  Naumenko, Konstantin 

Numerical treatment of finite rotation for a cylindrical particle
In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161

Altenbach, Holm;  Naumenko, Konstantin 

On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics
In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin 

Modelling of anisotropic creep in a multi-pass weld metal
In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387

Monografiebeitrag
Altenbach, Holm;  Naumenko, Konstantin;  Zhilin, Pavel A. 

A direct approach to the formulation of constitutive equations for rods and shells
In: Shell structures. - London [u.a.] : Taylor & Francis, 2005, S. 87-90

2004

Artikel in Zeitschrift
Altenbach, Johannes;  Altenbach, Holm;  Naumenko, Konstantin 

Edge effects in moderately thick plates under creep damage conditions
In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263

Naumenko, Konstantin;  Altenbach, Holm 

Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin 

Boundary layer in a moderately thick plates under creep-damage conditions
In: Proceedings of the 2004 International Conference on Computational & Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116

Naumenko, Konstantin;  Altenbach, Holm 

Shell and solid type finite element analysis of creep in thin-walled structures
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176

2003

Artikel in Zeitschrift
Altenbach, Holm;  Naumenko, Konstantin 

A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions
In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570

Altenbach, Holm;  Dyogtyev, Oleksandr;  Naumenko, Konstantin 

Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213

Altenbach, Holm;  Naumenko, Konstantin 

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics
In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234

Altenbach, Holm;  Naumenko, Konstantin 

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352

Konferenz/Aufsatz
Altenbach, Holm;  Naumenko, Konstantin;  Zhilin, Pavel A. 

A micro-polar theory for binary media with application to flow of fiber suspensions
In: Proceedings of the XXX Summer School \"Advanced Problems in Mechanics\", APM \'2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62

Altenbach, Holm;  Naumenko, Konstantin 

On the predictions of fiber orientation and elastic properties of injection molded-walled parts
In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21

Letzte Änderung: 28.08.2017 - Ansprechpartner:

Sie können eine Nachricht versenden an: Webmaster
Sicherheitsabfrage:
Captcha
 
Lösung: