A generalized framework towards structural mechanics of three-layered composite structures
In: Technische Mechanik - Magdeburg: Inst, Bd. 39.2019, 2, S. 202-219

Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 216.2019, S. 222-227

On thermal strains and residual stresses in the linear theory of antisandwiches
In: ZAMM - Berlin: Wiley-VCH, Volume 99, issue 8 (2019), Article e2019000062, insgesamt 17 Seiten

Stress concentration analysis of nanosized thin-film coating with rough interface
In: Continuum mechanics and thermodynamics - Berlin: Springer, 2019

A statistical interphase damage model of random particulate composites
In: International journal of plasticity - New York, NY: Pergamon Press, Bd. 116.2019, S. 118-142

On modeling of carbon nanotubes reinforced materials and on influence of carbon nanotubes spatial distribution on mechanical behavior of structural elements
In: International journal of engineering science - New York, NY [u.a.]: Science Direct, Bd. 143.2019, S. 1-13

Application of the classical beam theory for studying lengthwise fracture of functionally graded beams
In: Technische Mechanik - Magdeburg: Inst, Bd. 39.2019, 2, S. 229-240

Numerical modeling rolling contact problem and elasticity deformation of rolling die under hot milling
In: Metals: open access journal - Basel: MDPI, Bd. 9.2019, 2, S. 226

Modeling fatigue crack and spalling for rolling die under hot milling
In: Fatigue & fracture of engineering materials & structures - Oxford [u.a.]: Wiley-Blackwell, 2019

Analysis of CSN 12050 carbon steel in dry turning process for product sustainability optimization using taguchi technique
In: Journal of Engineering - New York, NY: Hindawi Publishing, Vol. 2019.2019, Article ID 7150157, insgesamt 10 Seiten

On nonlinear dynamic theory of thin plates with surface stresses
In: Thin-walled Laminated Structures - Cham: Springer; Mikhasev, Gennadi I., S. 19-26, 2019 - (Advanced Structured Materials; 106)

Short term transversally isotropic creep of plates under static and periodic loading
In: Advances in mechanics of high-temperature materials - Cham: Springer, S. 181-211, 2019 - (Advanced structured materials; 117)

Analysis of a power plant rotor made of tempered martensitic steel based on a composite model of inelastic deformation
In: Advances in mechanics of high-temperature materials - Cham: Springer, S. 1-34, 2019 - (Advanced structured materials; 117)

A damage mechanics based cohesive zone model with damage gradient extension for creep-fatigue-interaction
In: Key engineering materials: KEM - Uetikon a.S.: Trans Tech Publications, Bd. 794.2019, S. 253-259

Cohesive zone models - theory, numerics and usage in high-temperature applications to describe cracking and delamination
In: Advances in mechanics of high-temperature materials - Cham: Springer, S. 131-168, 2019 - (Advanced structured materials; 117)

Contributions to Advanced Dynamics and Continuum Mechanics
In: Cham: Springer, 2019, 1 Online-Ressource (XXV, 263 p. 115 illus., 69 illus. in color) - (Springer eBooks; Physics and Astronomy; Advanced Structured Materials; 114)

Dynamical processes in generalized continua and structures
In: Springer International Publishing, 2019, 1 Online-Ausgabe (XI, 525 Seiten), Illustrationen - (Advanced Structured Materials; 103)

Thin-walled Laminated Structures - Buckling, Vibrations and Their Suppression
In: Cham: Springer, 2019, 1 Online-Ressource (X, 280 p. 107 illus., 8 illus. in color) - (Springer eBooks; Engineering; Advanced Structured Materials; 106)

Engineering Design Applications
In: Cham: Springer International Publishing, 2019, 1 Online-Ressource (X, 519 p) - (Advanced Structured Materials; 92)

Engineering Design Applications II - Structures, Materials and Processes
In: Cham: Springer, 2019, 1st ed. 2020, 1 Online-Ressource (X, 434 p. 381 illus., 312 illus. in color) - (Springer eBooks; Engineering; Advanced Structured Materials; 113)

Modeling High Temperature Materials Behavior for Structural Analysis. Part2: Solution procedures and structural analysis examples
In: Cham: Springer, 2019, 1 Online-Ressource, Illustrationen - (Advanced Structured Materials; 112)

Fundamentals of continuum mechanics - classical approaches and new trends
In: Journal of physics / Conference Series - Bristol: IOP Publ, Vol. 991.2018, 1, Art. 012003, insgesamt 18 S.

Two-time-scales and time-averaging approaches for the analysis of cyclic creep based on ArmstrongFrederick type constitutive model
In: Proceedings of the Institution of Mechanical Engineers / C - London: Sage Publ, 2018

Verformungsanalyse elektrisch leitender metallischer Bauteile bei Magnetimpulsbearbeitung
In: Forschung im Ingenieurwesen: research journal - Berlin: Springer, 2018

Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ, Bd. 53.2018, 3, S. 156-177

Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels
In: Acta mechanica - Wien: Springer, Bd. 229.2018, 7, S. 3051-3068

On the effective elastic properties of isotactic polypropylene
In: Polymer: the international journal for the science and technology of polymers - Oxford: Elsevier Science, Bd. 160.2019, S. 291-302, 2018

Mechanical models and finite-element approaches for the structural analysis of photovoltaic composite structures - a comparative study
In: Mechanics of composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, 2018

Comparison of strength criteria based on the measurements on concrete
In: Journal of engineering mechanics - New York, NY: American Society of Civil Engineers, ASCE, Bd. 144.2018, 6

Effective properties of particulate composites with surface-varying interphases
In: Composites / B: an international journal - Amsterdam [u.a.]: Elsevier, insges. 51 S., 2018

Effective thermo-elastic properties of random composites with orthotropic components and aligned ellipsoidal inhomogeneities
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 136/137.2018, S. 220-240

On modeling and analysis of effective properties of Carbon Nanotubes Reinforced Materials
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 189.2018, S. 718-727

Thermo-elastic properties of random composites with unidirectional anisotropic short-fibers and interphases
In: European journal of mechanics / A - Paris: Elsevier, Bd. 70.2018, S. 249-266

Visualising elastic anisotropy - theoretical background and computational implementation
In: Continuum mechanics and thermodynamics - Berlin: Springer, 2018

Optimization of manufacturing sustainability in the Ethiopian industries
In: Procedia manufacturing - Amsterdam [u.a.]: Elsevier, Bd. 21.2018, S. 890-897

Application of the Müller-Liu entropy principle to gradient-damage models in the thermo-elastic case
In: International journal of damage mechanics - Thousand Oaks, Calif. [u.a.]: Sage, Bd. 27.2018, 3, S. 387-408

Bending of a three-layered plate with surface stresses
In: Analysis and Modelling of Advanced Structures and Smart Systems - Singapore: Springer, S. 1-10, 2018 - (Advanced Structured Materials; 81)

A model of nanosized thin film coating with sinusoidal interface
In: AIP conference proceedings - Melville, NY: Inst, Vol. 1959.2018, 1, Art. 070017, insgesamt 9 S.

Angular velocities, twirls, spins and rotation tensors in the continuum mechanics revisited
In: Generalized models and non-classical approaches in complex materials 1 - Cham: Springer International Publishing, S. 621-632, 2018 - (Advanced Structured Materials; 89)

Analytical modelling of the tooth translational motions - comparative analysis for different shapes of root
In: Advances in mechanics of materials and structural analysis: in honor of Reinhold Kienzler - [s.l.]: Springer-Verlag, S. 449-461, 2018

Globale Strukturanalyse an Photovoltaik-Modulen - Theorie, Numerik, Anwendung
In: Magdeburg, 2018, xix, 129, A1-A18 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 121-129]

On the elastic-plastic behaviour of regular honeycomb structures
In: Magdeburg, 2018, ix, 128 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 122-128]

A framework for modeling the mechanical behavior of tempered martensitic steels at high temperatures
In: Barleben: docupoint Verlag, 2018, x, 134, A-11 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 31), ISBN 978-3-86912-147-5

Entwicklung eines Prüfkonzeptes für thermomechanisch hoch beanspruchte Bereiche von Zylinderköpfen und numerische Abbildung der thermischen Belastungszyklen
In: Magdeburg, 2018, X, 145 Seiten, Illustrationen, Diagramme, Tabellen ; [Literaturverzeichnis: Seite 139-145]

Advances in mechanics of materials and structural analysis - in honor of Reinhold Kienzler
In: [s.l.]: Springer-Verlag, 2018, 1. Aufl., 1 Online-Ressource (PDF, 19415 KB, 461 S.)

Analysis and Modelling of Advanced Structures and Smart Systems
In: Singapore: Springer Singapore: 2018, 1 Online-Ressource (XVIII, 366 p. 192 illus., 72 illus. in color) - (Advanced Structured Materials; 81)

Generalized Models and Non-classical Approaches in Complex Materials 1
In: s.l.: Imprint: Springer, 2018, Online-Ressource (XLII, 760 p, online resource) - (SpringerLink; Bücher; Advanced Structured Materials; 89)

Generalized Models and Non-classical Approaches in Complex Materials 2
In: Cham: Springer International Publishing, 2018, Online-Ressource (XIII, 306 p. 95 illus., 62 illus. in color, online resource) - (SpringerLink; Bücher; Advanced Structured Materials; 90)

Analysis and Modelling of Advanced Structures and Smart Systems
In: Singapore: Springer, 2018, Online-Ressource (XVIII, 366 p. 192 illus., 72 illus. in color, online resource) - (Springer eBook Collection; Engineering; SpringerLink; Bücher; Advanced Structured Materials; 81)

Improved Performance of Materials - Design and Experimental Approaches
In: Cham: Springer, 2018, Online-Ressource (IX, 282 p. 179 illus., 116 illus. in color, online resource) - (Springer eBook Collection; Engineering; SpringerLink; Bücher; Advanced Structured Materials; 72)

Improved Performance of Materials - Design and Experimental Approaches
In: s.l.: Imprint: Springer, 2018, 1 Online-Ressource (IX, 282 p. 179 illus., 116 illus. in color) - (Advanced Structured Materials; 72)

Holzmann/Meyer/Schumpich Technische Mechanik - Festigkeitslehre : 104 Aufgaben, 133 Beispiele und zahlreiche Klausuraufgaben mit Lösungen
In: Wiesbaden: Springer Vieweg, 2018, 13., überarbeitete und erweiterte Auflage, 1 Online-Ressource (XII, 430 Seiten), Illustrationen

Kontinuumsmechanik - Einführung in die materialunabhängigen und materialabhängigen Gleichungen
In: Berlin, Heidelberg: Springer Vieweg, 2018, 4., korrigierte und überarbeitete Auflage, 1 Online-Ressource (xiv, 344 Seiten), Illustrationen

Mechanics of Composite Structural Elements
In: Singapore: Springer Singapore: 2018, 2nd ed. 2018, 1 Online-Ressource (XVI, 503 p. 121 illus)

Mechanics of Composite Structural Elements
In: Singapore: Springer, 2018, 2nd ed. 2018, Online-Ressource (XVI, 503 p. 121 illus, online resource) - (Springer eBook Collection; Chemistry and Materials Science; SpringerLink; Bücher)

On the elastic plates and shells with residual surface stresses
In: Procedia IUTAM - Amsterdam [u.a.]: Elsevier, Bd. 21.2017, S. 25-32

A homogeneous substitute material for the core layer of photovoltaic composite structures
In: Composites / B: an international journal - Amsterdam [u.a.]: Elsevier, Bd. 112.2017, S. 353-372

Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading
In: Composites communications - Amsterdam: Elsevier, Bd. 5.2017, S. 23-26

Mechanical behaviour of photovoltaic composite structures - influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations
In: Composites communications - Amsterdam: Elsevier, Bd. 6.2017, S. 59-62

Projector representation of isotropic linear elastic material laws for directed surfaces
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 97.2017, 12, S. 1625-1634

In-plane and out-of-plane elastic properties of two-dimensional single crystal
In: Acta mechanica - Wien: Springer, Bd. 228.2017, 2, S. 683-691

Modelling functionally graded materials in heat transfer and thermal stress analysis by means of graded finite elements
In: Applied mathematical modelling: simulation and computation for engineering and environmental systems - Amsterdam [u.a.]: Elsevier Science, Bd. 45.2017, S. 422-438

Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, 2017

Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
In: Archive of applied mechanics - Berlin: Springer, insges. 17 S., 2017

Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 700.2017, S. 503-511

Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
In: Mechanics of advanced materials and modern processes - Berlin: Springer, 2015, Bd. 3.2017, insges. 20 S.

Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel
In: The journal of strain analysis for engineering design: JSA - London: Sage Publ, 2017

Growing solids and thin-walled structures
In: Procedia IUTAM - Amsterdam [u.a.]: Elsevier, Bd. 23.2017, S. 13-32

A definition of equivalent inhomogeneity applicable to various interphase models and various shapes of inhomogeneity
In: Procedia IUTAM - Amsterdam [u.a.]: Elsevier, Bd. 21.2017, S. 63-70

Thermo-elastic properties of random particulate nano-materials for various models of interphase
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, Bd. 126.2017, S. 130-141

Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures
In: Mechanics for materials and technologies - Cham, Switzerland: Springer International Publishing, S. 73-122, 2017 - (Advanced structured materials; Volume 46)

Basics of mechanics of micropolar shells
In: Shell-like Structures - Cham: Springer, S. 63-111, 2017 - (CISM International Centre for Mechanical Sciences, Courses and Lectures; 572)

Thin-walled structural elements - classification, classical and advanced theories, new applications
In: Shell-like Structures - Cham: Springer, S. 1-62, 2017 - (CISM International Centre for Mechanical Sciences, Courses and Lectures; 572)

Stress concentration in ultra-thin coating with undulated surface profile
In: Coupled Problems in Science and Engineering VII - COUPLED PROBLEMS 2017: proceedings of the VII International Conference on Coupled Problems in Science and Engineering, Rhodes Island, Greece, June 12-14, 2017 - Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE), S. 1183-1192

Rotation suspendierter axialsymmetrischer Partikel unter Berücksichtigung der Partikel-Medium-Wechselwirkung
In: Magdeburg, 2017, XII, 94, A-8 Seiten, Illustrationen, Diagramme, 30 cm ; [Literaturverzeichnis: Seite 91-94]

Shell-like structures - advanced theories and applications
In: s.l., Imprint: Springer, 2017, 1 Online-Ressource (VII, 288 p. 72 illus., 20 illus. in color) - (CISM International Centre for Mechanical Sciences, Courses and Lectures; 572)

Shell-like Structures - Advanced Theories and Applications
In: Cham: Springer, 2017, Online-Ressource (VII, 288 p. 72 illus., 20 illus. in color, online resource) - (Springer eBook Collection; Engineering; SpringerLink; Bücher; CISM International Centre for Mechanical Sciences, Courses and Lectures; 572)

Mechanics for materials and technologies
In: Cham, Switzerland, Springer International Publishing, 2017, 1 Online-Ressource - (Advanced structured materials; Volume 46)

Advanced structured materials
In: Heidelberg, Springer, 2017

Properties and characterization of modern materials
In: Singapore, Springer Science+Business Media, 2017, x, 452 Seiten, Illustrationen, Diagramme, 24 cm - (Advanced structured materials; Volume 33), ISBN 978-981-10-1601-1 ; Kongress: International Conference on Advanced Computational Engineering and Experimenting 9 (Munich : 2015.06.29-07.02) ; [Literaturangaben]

Properties and Characterization of Modern Materials
In: s.l.: Imprint: Springer, 2017, 1 Online-Ressource (X, 452 p. 339 illus., 222 illus. in color) - (Advanced Structured Materials; 33)

Consideration of damage in the analysis of autofrettage of thick-walled pressure vessels
In: Proceedings of the Institution of Mechanical Engineers / C. - London : Sage Publ, Bd. 230.2016, 20, S. 3585-3593

A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 158.2016, S. 340-358

On the choice of the power law flow rule and its consequences in crystal plasticity
In: Key engineering materials - Aedermannsdorf: Trans Tech Publ, Bd. 725.2016, S. 359-365

On the isotropic and anisotropic thermal conductivity of metallic hollow sphere structures
In: Proceedings of the Institution of Mechanical Engineers / L - London: Sage Publ, Bd. 230.2016, 3, S. 789-798

Fitting of the strength hypotheses
In: Acta mechanica - Wien: Springer, 2016

A model of cylindrical inhomogeneity with spring layer interphase and its application to analysis of short-fiber composites
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 160.2016, S. 635-652

Effective properties of short-fiber composites with Gurtin-Murdoch model of interphase
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 97/98.2016, S. 75-88

Stability of inhomogeneous micropolar cylindrical tube subject to combined loads
In: Mathematics and mechanics of solids - Thousand Oaks, Calif. [u.a.]: Sage, Bd. 21.2016, 9, S. 1082-1094

Modelling creep behaviour of superheater materials
In: Energy procedia - Amsterdam [u.a.]: Elsevier, Bd. 93.2016, S. 197-202

On strain rate tensors and constitutive equations of inelastic micropolar materials
In: Generalized Continua as Models for Classical and Advanced Materials - Cham: Springer International Publishing, S. 1-13, 2016 - (Advanced Structured Materials; 42)

Classification of gradient adhesion theories across length scale
In: Generalized Continua as Models for Classical and Advanced Materials - Cham: Springer International Publishing, S. 261-277, 2016 - (Advanced Structured Materials; 42)

Soft suppression of traveling localized vibrations in medium-length thin sandwich-like cylindrical shells containing magnetorheological layers via nonstationary magnetic field
In: Dynamical Systems: Theoretical and Experimental Analysis: Łódź, Poland, December 7-10, 2015 - [Cham]: Springer, S. 241-260, 2016 - (Springer Proceedings in Mathematics & Statistics; 182)

Modellierung des Kontaktverhaltens feiner adhäsiver Partikel
In: Barleben, docupoint Verlag, 2017, XI, 171 Seiten, Illustrationen, Diagramme, 21 cm - (Docupoint Wissenschaft; Micro-macro transactions; Volume 26), ISBN 978-3-86912-126-0

Generalized Continua as Models for Classical and Advanced Materials
In: Cham: s.l.: Springer International Publishing: Imprint: Springer: 2016, 1 Online-Ressource (XII, 457 p. 104 illus., 48 illus. in color) - (Advanced Structured Materials; 42), ISBN: 978-3-319-31721-2 ; ; [Description based upon print version of record]

Generalized Continua as Models for Classical and Advanced Materials
In: s.l., Imprint: Springer, 2016, 1 Online-Ressource (XII, 457 p. 104 illus., 48 illus. in color) - (Advanced Structured Materials; 42)

Machining, joining and modifications of advanced materials
In: Singapore, Imprint: Springer, 2016, 1 Online-Ressource (VIII, 269 p. 173 illus., 138 illus. in color) - (Advanced Structured Materials; 61)

Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
In: Heidelberg, Springer Vieweg, 2016, 2. Auflage, 1 Online-Ressource (XIX, 531 Seiten), 167 Illustrationen

Holzmann/Meyer/Schumpich Technische Mechanik Festigkeitslehre
In: Wiesbaden, Springer Vieweg, 2016, 12., verbesserte und erweiterte Auflage, 1 Online-Ressource (XII, 420 Seiten), 270 Illustrationen

Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen
In: Rundbrief// Gesellschaft für Angewandte Mathematik und Mechanik, GAMM - Dresden: GAMM, 2, S. 4-10, 2016

Modeling high temperature materials behavior for structural analysis. Part I: continuum mechanics foundations and constitutive models
In: Springer International Publishing, 2016, 1 Online-Ressource (XIII, 371 Seiten), Illustrationen - (Advanced structured materials; 28)

Prediction of Accumulation of Technological Stresses in a Pipeline Upon its Repair by a Composite Band
In: Mechanics of Composite Materials, 2015, S. 139-156, ISSN 1573-8922, 10.1007/s11029-015-9485-8

Prediction of Accumulation of Technological Stresses in a Pipeline Upon its Repair by a Composite Band
In: Mechanics of Composite Materials, 2015, S. 139-156, ISSN 0191-5665, 10.1007/s11029-015-9485-8

Analysis of casting materials under thermal fatigue
In: Applied mechanics and materials: AMM - [S.l.]: Scientific.Net, Bd. 784.2015, S. 95-103

Inelastic deformation of conductive bodies in electromagnetic fields
In: Continuum mechanics and thermodynamics: analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, insges. 13 S., 2015

On the constitutive equations of viscoelastic micropolar plates and shells of differential type
In: Mathematics and mechanics of complex systems - Dell\'Aquila: Mathematical Science Publ, Bd. 3.2015, 3, S. 273-283

On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer
In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 95.2015, 10, S. 1004-1011

Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band
In: Mechanics of composite materials. - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 51.2015, 2, S. 139-156

An evaluation of displacement-based finite element models used for free vibration analysis of homogeneous and composite plates
In: Journal of sound and vibration - London: Academic Press, Bd. 358.2015, S. 152-175

Computational simulations of thermal shock cracking by the virtual crack closure technique in a functionally graded plate
In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, 2015

A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory
In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 133.2015, S. 265-277

Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels
In: International journal of mechanical sciences - Amsterdam [u.a.]: Elsevier Science, 2015

Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading
In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science; Vol. 96.2015, Part A, S. 178-184

Approximate rules for calculation of notch stresses considering plasticity and creep
In: Plastic behavior of conventional and advanced materials: theory, experiment, and modeling: proceedings of Plasticity\'15: the twenty first International Symposium on Plasticity and its Current Applications - Fulton, Maryland, USA: NEAT Press, S. 124-126, 2015 ; Kongress: PLASTICITY\' 15 21 (Montego Bay, Jamaica : 2015.01.04-09)

Classical and non-lassical failure criteria
In: Failure and Damage Analysis of Advanced Materials - Wien [u.a.]: Springer, S. 1-66, 2015 - (CISM International Centre for Mechanical Sciences; 560)

Creep behavior modeling of polyoxymethylene (POM) applying rheological models
In: Inelastic behavior of materials and structures under monotonic and cyclic loading - Heidelberg [u.a.]: Springer, S. 1-5, 2015 - (Advanced structured materials; 57)

On the theories of plates and shells at the nanoscale
In: Shell and Membrane theories in mechanics and biology : from macro- to nanoscale structures. - Heidelberg [u.a.] : Springer, S. 25-57, 2015 - (Advanced structured materials; 45)

On the direct approach in the theory of second gradient plates
In: Shell and Membrane theories in mechanics and biology : from macro- to nanoscale structures. - Heidelberg [u.a.] : Springer, S. 147-154, 2015 - (Advanced structured materials; 45)

Analysis of inelastic behavior for high temperature materials and structures
In: From creep damage mechanics to homogenization methods: a liber amicorum to celebrate the birthday of Nobutada Ohno, S. 241-298, 2015 - (Advanced structured materials; 64)

Modellierung und Berechnung von mechanischen Spannungen und Volumenänderungen bei Reaktionsharzen
In: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2015, X, 134 S., graph. Darst.

Identification technique of mechanism-based constitutive model for cast iron under thermo-mechanical loads
In: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2015, IX, 132 S., graph. Darst.

Untersuchungen zu Eigenspannungen in CFK-Schaum-Sandwichstrukturen
In: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2015, XXIII, 123 S., Ill., graph. Darst., 21 cm

Entwicklung einer Methodik zur Parameteridentifikation für Orientierungsmodelle in Spritzgießsimulationen
In: Magdeburg, 2015, XIII, 169 Blätter, Illustrationen ; [Literaturverzeichnis: Seite 158-169]

Charakterisierung von makro- und mikroskaligen thermo-mechanischen Materialeigenschaften dünner Polymerfilme
In: Zugl.: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2015: Hamburg, tredition GmbH, III, 149 S., Ill., graph. Darst., 24 cm, ISBN 978-3-7323-5649-2

Failure and Damage Analysis of Advanced Materials
In: Wien [u.a.], Springer, 2015, Online-Ressource - (CISM International Centre for Mechanical Sciences; 560)

From creep damage mechanics to homogenization methods - a liber amicorum to celebrate the birthday of Nobutada Ohno
In: 2015, Online-Ressource - (Advanced structured materials; 64)

Inelastic behavior of materials and structures under monotonic and cyclic loading
In: Heidelberg [u.a.], Springer, 2015, Online-Ressource - (Advanced structured materials; 57)

Shell and Membrane theories in mechanics and biology - from macro- to nanoscale structures
In: Heidelberg [u.a.], Springer, 2015, Online-Ressource - (Advanced structured materials; 45)

Applications of computational tools in biosciences and medical engineering
In: Cham [u.a.], Springer International Publ., 2015, Online Ressource (PDF-Datei) - (Advanced Structured Materials; 71)

Mechanical and materials engineering of modern structure and component design
In: Cham [u.a.], Springer International Publ., 2015, Online Ressource (PDF-Datei) - (Advanced Structured Materials; 70)

Mechanical and materials engineering of modern structure and component design
In: London, Springer, 2015, xi, 451 Seiten, Illustrationen, Diagramme, 24 cm - (Advanced structured materials; Volume 70), ISBN 978-3-319-19442-4 ; Kongress: International Conference on Advanced Computational Engineering and Experimenting 8 (Paris : 2014.06.30-07.03) ; [Literaturangaben; This volume contains 35 revised and extended research articles written by experienced researchers participating in the conference]

Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff
In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67

Strain rate tensors and constitutive equations of inelastic micropolar materials
In: International journal of plasticity. - New York, NY : Pergamon Press, Bd. 63.2014, S. 3-17

On the application of the continuum damage mechanics to multi-axial low-cyclic damage
In: Archive of applied mechanics : (Ingenieur-Archiv). - Berlin : Springer, 2014

Homogenisation approach in analysis of creep behaviour in multipass weld
In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53

A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428

On the influence of the magnetic field on the eigenmodes of thin laminated cylindrical shells containing magnetorheological elastomer
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 113.2014, S. 186-196

Description of fluid-gas phase transition in the frame of continuum mechanics
In: Continuum mechanics and thermodynamics : analysis of complex materials and judicious evaluation of the environment. - Berlin : Springer, Bd. 26.2014, 2, S. 221-245

Basic equations of continuum mechanics
In: Plasticity of pressure-sensitive materials. - Berlin [u.a] : Springer, S. 1-47, 2014

Constitutive models for creep-damage behavior at quasi-static and cyclic loading
In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity \'14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69 ; Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08

Phenomenological yield and failure criteria
In: Plasticity of pressure-sensitive materials. - Berlin [u.a] : Springer, S. 49-152, 2014

Numerische Untersuchungen zur mechanischen Zuverlässigkeit verkapselter Siliziumsolarzellen
In: Zugl.: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2014: Halle (Saale), Fraunhofer-Institut für Werkstoffmechanik IWM, III, 155 S., Ill., graph. Darst., 21 cm

Simulation der Schwingfestigkeit von Elastomerbauteilen
In: Halle Univ., Zentrum für Ingenieurwissenschaften, Diss., 2014, Online-Ressource (158 Bl. = 28,20 mb)

Micro scale modeling grain boundary damage under creep conditions
In: Magdeburg Univ., Fak. für Maschinenbau, Diss., 2014, VII, 113 S., Ill., graph. Darst., 30 cm

Plasticity of pressure-sensitive materials
In: Berlin [u.a], Springer, 2014, X, 376 S., graph. Darst., 25 cm - (Engineering materials), ISBN 978-3-642-40944-8 ; [Literaturangaben]

Design and computation of modern engineering materials
In: Cham [u.a.], Springer, 2014, VIII, 438 S., Ill., graph. Darst., 24 cm - (Advanced structured materials; 54), ISBN 978-3-319-07382-8 ; [Literaturangaben]

Holzmann/Meyer/Schumpich Technische Mechanik Festigkeitslehre
In: Wiesbaden, Springer Vieweg, 2014, 11., überarb. und erw. Aufl., Online-Ressource (XVIII, 412 S.), Ill.

A material model for describing the anomalous ratcheting effect of advanced chromium steels
In: CanCNSM 2013. - Montréal, insges. 2 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Analysis of laminates for photovoltaic appliacations
In: 8th German-Greek-Polish Symposium on recent advances in mechanics. - Univ. of Bremen, S. 59-60, 2013 ; Kongress: German-Greek-Polish Symposium on recent advances mechanics; 8 (Goslar) : 2013.09.09-13

A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers
In: CanCNSM 2013. - Montréal, insges. 6 S. ; Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Equilibrium of a second-gradient fluid and an elastic solid with surface stresses
In: Meccanica. - Dordrecht [u.a.] : Springer Science + Business Media B.V, insges. 9 S., 2013

Large deformations of inelastic shells
In: Key engineering materials. - Aedermannsdorf : Trans Tech Publ, Bd. 535/536.2013, S. 76-79

Modeling creep damage of an aluminumsilicon eutectic alloy
In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, Bd. 22.2013, 5, S. 683-698

On the constitutive equations of viscoelastic micropolar plates and shells
In: Proceedings of the Indian National Science Academy. - New Delhi, Bd. 79.2013, 4, S. 513-518

Transient problems for piezoelectric bodies with surface films
In: Teoretičeskaja i prikladnaja mechanika. - Kiev : Vyšča Škola, Bd. 52.2013, 6, S. 115-124

Vibration analysis of non-linear 6-parameter prestressed shells
In: Meccanica. - Dordrecht [u.a.] : Springer Science + Business Media B.V, insges. 11 S., 2013

On the Cosserat model for thin rods made of thermoelastic materials with voids
In: Discrete and continuous dynamical systems. - Springfield, Mo : American Institute of Mathematical SciencesDiscrete and continuous dynamical systems / S, Bd. 6.2013, 6, S. 1473-1485

Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80

Visualization of the unified strength theory
In: Archive of applied mechanics. - Berlin : Springer, Bd. 83.2013, 7, S. 1061-1085

Yield criteria of hexagonal symmetry in the π-plane
In: Acta mechanica. - Wien : Springer, Bd. 224.2013, 7, S. 1527-1540

Micro-macro analysis of creep and damage behavior of multi-pass welds
In: Problemy mašinostroenija. - Kiev : Izd. \"Naukova Dumka\", Bd. 16.2013, 1, S. 31-38

Unsymmetric three-layer laminate with soft core for photovoltaic modules
In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339

Actual developments in the nonlinear shell theory - state of the art and new applications of the six-parameter shell theory
In: Shell structures: theory and applications ; Vol. 3. - Boca Raton [u.a.] : CRC Press, S. 3-12, 2013 ; Kongress: Conference Shell Structures: Theory and Applications; 10 (Gdańsk; Jurata) : 2013.10.16-18

Cosserat media
In: Generalized continua from the theory to engineering applications. - Wien [u.a.] : Springer, S. 65-130, 2013 - (CISM International Centre for Mechanical Sciences; 541)

Cosserat-type rods
In: Generalized continua from the theory to engineering applications. - Wien [u.a.] : Springer, S. 179-248, 2013 - (CISM International Centre for Mechanical Sciences; 541)

Cosserat-type shells
In: Generalized continua from the theory to engineering applications. - Wien [u.a.] : Springer, S. 131-178, 2013 - (CISM International Centre for Mechanical Sciences; 541)

High-temperature inelastic behavior of the austenitic steel AISI type 316
In: Advanced materials modelling for structures. - Berlin [u.a.] : Springer, S. 17-30, 2013 - (Advanced Structured Materials; 19)

Mathematical study of boundary-value problems of linear elasticity with surface stresses
In: Altenbach, Holm: : Surface Effects in Solid Mechanics. - Berlin [u.a.] : Springer, S. 1-19, 2013 - (Advanced Structured Materials; 30)

Mechanical properties of materials considering surface effects
In: IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures. - Dordrecht [u.a.] : Springer, S. 105-115, 2013 - (IUTAM bookseries; 31)

On the continuum mechanics approach in modeling nanosized structural elements
In: New frontiers of nanoparticles and nanocomposite materials. - Berlin : Springer, S. 351-371, 2013 - (Advanced Structured Materials; 4)

On the influence of residual surface stresses on the properties of structures at the nanoscale
In: Altenbach, Holm: : Surface Effects in Solid Mechanics. - Berlin [u.a.] : Springer, S. 21-32, 2013 - (Advanced Structured Materials; 30)

Rayleigh variational principle and vibrations of prestressed shells
In: Shell structures: theory and applications ; Vol. 3. - Boca Raton [u.a.] : CRC Press, S. 285-288, 2013 ; Kongress: Conference Shell Structures: Theory and Applications; 10 (Gdańsk; Jurata) : 2013.10.16-18

Shells and plates with surface effects
In: Generalized continua as models for materials. - Berlin [u.a.] : Springer, S. 1-15, 2013 - (Advanced Structured Materials; 22)

Surface viscoelasticity and effective properties of materials and structures
In: Advanced materials modelling for structures. - Berlin [u.a.] : Springer, S. 9-16, 2013 - (Advanced Structured Materials; 19)

Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 10 S., 2013 ; Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26

On effictive stiffness of a three-layered plate with a core filled with a capillary fluid
In: Shell structures: theory and applications ; Vol. 3. - Boca Raton [u.a.] : CRC Press, S. 85-88, 2013

Yield criteria for incompressible materials in the shear stress space
In: Experimental and numerical investigation of advanced materials and structures. - Berlin [u.a.] : Springer, S. 107-119, 2013 - (Advanced structured materials; 41)

Material strain tensor
In: Generalized continua as models for materials. - Berlin [u.a.] : Springer, S. 321-331, 2013 - (Advanced Structured Materials; 22)

Modeling of micro- and nanostructures made of films and crystals/fibers arrays
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013; VIII, 109 S.: graph. Darst.; 30 cm

Systematische Untersuchung von Rissen in verkapselten Solarzellen bei thermischer und mechanischer Belastung
In: Zugl.: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013; Halle (Saale): Fraunhofer CSP; 129 S.: Ill., graph. Darst.; 21 cm - (CSP-Bericht / Fraunhofer-Center für Silizium-Photovoltaik CSP; 963/2013)

Modeling the inelastic behavior of heat exchangers accounting for fluid-structure interactions
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013; XI, 94 S.: graph. Darst.

Generalized continua from the theory to engineering applications
In: Wien [u.a.]: Springer, 2013; 402 S.: Ill., graph. Darst. - (CISM International Centre for Mechanical Sciences; 541), ISBN 978-3-7091-1370-7 ; Kongress: Course Generalized Continua - from the Theory to Engineering Applications; (Udine) : 2011.09.19-23

Advanced materials modelling for structures
In: Berlin [u.a.]: Springer, 2013; xxii, 361 p.: ill.; 24 cm - (Advanced structured materials; 19), ISBN 3642351662 ; Kongress: IUTAM Symposium \"Advanced Materials Modelling for Struktures\"; (Paris) : 2012.04.23-27

Generalized continua as models for materials - with multi-scale effects or under multi-field actions
In: Berlin [u.a.]: Springer, 2013; XII, 331 S.: Ill., graph. Darst. - (Advanced structured materials; 22), ISBN 978-3-642-36393-1 ; Kongress: Trilateral Seminar Generalized Continua as Models for Materials with Multi-Scale Effects or Under Multifield Actions; 2 (Wittenberg) : 2012.09.26-30 ; [Literaturangaben]

Advanced computational engineering and experimenting II - selected, peer reviewed papers from the Sixth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2012), July 1-4, 2012, Istanbul, Turkey
In: Zürich-Durnten: Trans Tech, 2013; 150 S., ISBN 978-3-03-785682-6 ; Kongress: International Conference on Advanced Computational Engineering and Experimenting ; 6 (Istanbul, Turkey) : 2012.07.01-04 ; ACE-X 2012; 6 (Istanbul, Turkey) : 2012.07.01-04

Advances in bio-mechanical systems and materials
In: Berlin [u.a.]: Springer, 2013; 200 S. - (Advanced structured materials; 40), ISBN 978-331-90047-8-5

Characterization and Development of Biosystems and Biomaterials
In: Berlin: Springer, 2013; Online-Ressource (IX, 253 p. 152 illus): digital - (Advanced Structured Materials; 29), ISBN 978-3-642-31470-4 ; [Description based upon print version of record]

Experimental and numerical investigation of advanced materials and structures
In: Berlin [u.a.]: Springer, 2013, [Online-Ausg.] - (Advanced structured materials; 41)

Design and analysis of materials and engineering structures - [5th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2011, was held in Algarve, Portugal, from 3 to 6 July, 2011 ; revised and extended research articles]
In: Berlin [u.a.]: Springer, 2013; VIII, 178 S.: Ill., graph. Darst.; 24 cm - (Advanced structured materials; 32), ISBN 978-3-642-32294-5 ; Kongress: International Conference on Advanced Computational Engineering and Experimenting; 5 (Algarve) : 2011.07.03-06 ; ACE-X; 5 (Algarve) : 2011.07.03-06 ; [Literaturangaben]

Surface Effects in Solid Mechanics - Models, Simulations and Applications
In: Berlin [u.a.]: Springer, 2013; Online-Ressource (XI, 194 p. 96 illus., 20 illus. in color): digital - (Advanced Structured Materials; 30), ISBN 978-3-642-35783-1 ; [Description based upon print version of record]

Foundations of micropolar mechanics
In: Heidelberg [u.a.]: Springer, 2013; X, 142 S.: graph. Darst.; 235 mm x 155 mm - (Springer briefs in applied sciences and technology), ISBN 978-3-642-28352-9 ; [Literaturangaben]

Izgib trechslojnoj plastinki s blizkoj k nulju žestkostʹju na poperečnyn sdvig
In: Fizičeskaja mezomechanika - Tomsk: Inst. Fiziki Pročnosti i Materialovedenija SO RAN, Bd. 15.2012, 6, S. 15-19

Interaction of a helical shell with a nonlinear viscous fluid
In: International journal of engineering science. - New York, NY [u.a.] : Science Direct, Bd. 61.2012, S. 53-58

Modeling creep ratcheting of an aluminum-silicon eutectic alloy
In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S. ; Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31

Strain rate tensors in micropolar mechanics
In: Analytical, Computational, and experimental inelasticity in deformable solids. - NEAT Press, S. 76-78, 2013 ; Kongress: International Symposium on Plasticity & Its Current Applications; 19 (Nassau, Bahamas) : 2013.01.03-08

Teorija polzučesti - ot klassičeskich do nekotorych sovremennych modelej
In: Aktualʹnye problemy mechaniki splošnoj sredy: trudy meždunarodnoj konferencii, posvja ščennoj 100-letiju akademika NAN Armenii N. Ch. Arutjunjana 08-12 oktjabrja 2012, Cachkadzor, Armenija - Erevan: Tigran Mec, S. 71-75

Strukturmechanische Auslegung von zellularen metallischen punktgeschweißten Sandwichstrukturen
In: Halle Univ., Zentrum für Ingenieurwissenschaften, Diss., 2012, Online-Ressource (141 Bl. = 37,85 mb)

Ausbreitung elastischer Wellen in komplexen dünnwandigen Strukturen
In: Halle Univ., Zentrum für Ingenieurwissenschaften, Diss., 2012, Online-Ressource (182 S. = 6,51 mb)

Characterization and Development of Biosystems and Biomaterials
In: Berlin: Springer Berlin, 2012; 250 S.; 235 mm x 155 mm - (Advanced Structured Materials; 29), ISBN 3642314694

Analysis and design of biological materials and structures
In: Heidelberg [u.a.] Springer, 2012, IX, 221 S., Ill., graph. Darst., 24 cm - (Advanced structured materials; 14), ISBN 978-3-642-22130-9 ; [Literaturangaben]

Materials with complex behaviour II - properties, non-classical materials and new technologies ; [the 4th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2010, was held in Paris, France, from 05 to 07 July 2010]
In: Berlin [u.a.]: Springer, 2012; XI, 727 S.: Ill., graph. Darst.; 235 mm x 155 mm - (Advanced Structured Materials; 16), ISBN 364222699X ; Kongress: International Conference on Advanced Computational Engineering and Experimenting; 4 (Paris, France) : 2010.07.05-07 ; ACE-X; 4 (Paris, France) : 2010.07.05-07

Mechanics and properties of composed materials and structures
In: Berlin [u.a.]: Springer, 2012; Online-Ressource: digital - (Advanced Structured Materials; 31), ISBN 978-3-642-31497-1 ; [Includes bibliographical references]

Kontinuumsmechanik - Einführung in die materialunabhängigen und materialabhängigen Gleichungen
In: Berlin [u.a.]: Springer Vieweg, 2012, 2. Aufl.; XIV, 342 S.: graph. Darst.; 24 cm, ISBN 978-3-642-24118-5 ; [Literaturangaben]

Technische Mechanik [3]: Festigkeitslehre - mit 108 Aufgaben und 135 Beispielen mit Lösungen
In: Wiesbaden: Springer Vieweg, 2012, 10., überarb. Aufl.; XVI, 387 S.: graph. Darst. - (Studium)

On a thermodynamic theory of rods with two temperature fields
In: Acta mechanica. - Wien : Springer, Bd. 223.2012, 8, S. 1583-1596

Surface viscoelasticity and effective properties of thin-walled structures at the nanoscale
In: International journal of engineering science. - Oxford [u.a.] : Elsevier Science, Bd. 59.2012, S. 83-89

The Korn-type inequality in a Cosserat model for thin thermoelastic porous rods
In: Meccanica. - Dordrecht [u.a.] : Kluwer, Bd. 47.2012, 3, S. 789-794

Deformation analysis of functionally graded beams by the direct approach
In: Composites. - Oxford [u.a.] : ElsevierComposites / B, Bd. 43.2012, 3, S. 1315-1328

Modelling of high-temperature inelastic behaviour of the austenitic steel AISI type 316 using a continuum damage mechanics approach
In: The journal of strain analysis for engineering design. - London : Sage, Bd. 47.2012, 4, S. 229-243

Analysis of laminated glass beams for photovoltaic applications
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036

Characterizing the anisotropic hardening behavior of aluminum bonding wires
In: Materials with complex behaviour II. - Berlin [u.a.] : Springer, S. 583-598, 2012

Modeling of high-temperature inelastic behavior of the steel AISI type 316 using CDM approach
In: Non-linear response of conventional & advanced materials, and multi-scale modeling. - Fulton, Md. : NEAT Press, S. 256-258, 2012

Consistent view of generalised yield surfaces
In: Non-linear response of conventional & advanced materials, and multi-scale modeling. - Fulton, Md. : NEAT Press, S. 76-78, 2012

On the theory of porous elastic rods
In: International journal of solids and structures. - New York, NY [u.a.] : Elsevier, Bd. 48.2011, 6, S. 910-924

Micropolar shells as two-dimensional generalized continua models
In: Mechanics of generalized continua. - Berlin [u.a.] : Springer, S. 23-55, 2011 - (Advanced Structured Materials; 7)

On the inelastic constitutive equations of plates and shells made of foams
In: Engineering plasticity and its applications. - Singapore [u.a.] : World Scientific, S. 86-90, 2011 ; Kongress: AEPA; 10 (Wuhan, China) : 2010.11.15-17

Thermomechanics of photovoltaic modules
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2011; Online-Ressource (89 S. = 6,56 mb)

Festigkeitsverhalten der Al-Si-Gusslegierung AlSi12CuNiMg bei erhöhten Temperaturen
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2011; VI, 114 S.: graph. Darst.

Beschreibung des Kriechverhaltens kurzfaserverstärkter Komposite aus den Eigenschaften der Konstituenten
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2011; Online-Ressource (I, 98 Bl. = 4,33 mb)

Druck-, Stoß- und Bruchverhalten feuchter kugelförmiger Granulate
In: Zugl.: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2011; Magdeburg: Docupoint-Verl.; XIV, 235 S.: Ill., graph. Darst.; 21 cm - (Micro-macro transactions; 5), ISBN 978-3-86912-104-8

Mechanics of generalized continua - [first trilateral French-German-Russian seminar held in Lutherstadt Wittenberg (Germany) August 9 - 11, 2010 ; selection from the lectures]
In: Berlin [u.a.]: Springer, 2011; XIX, 350 S.: Ill., graph. Darst. - (Advanced structured materials; 7), ISBN 978-3-642-19218-0 ; Kongress: French-German-Russian Seminar: \"Mechanics of Generalized Continua\"; 1 (Wittenberg) : 2010.08.09-11 ; [Literaturangaben]

Shell-like structures - non-classical theories and applications ; [contributions presented at the EUROMECH 527 Colloquium "Shell-Like Structures: Non-Classical Theories and Applications" held in Wittenberg, Germany]
In: Berlin [u.a.]: Springer, 2011; XI, 750 S.: Ill., graph. Darst.; 24 cm - (Advanced structured materials; 15), ISBN 978-3-642-21854-5 ; Kongress: EUROMECH Colloquium; 527 (Wittenberg) : 2011.08.22-26 ; Colloquium \"Shell-Like Structures: Non-Classical Theories and Applications\"; (Wittenberg) : 2011.08.22-26

Advanced computational engineering and experimenting - selected, peer reviewed papers from the Fourth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2010), July 8th - 9th, 2010, held at the Hotel Concorde La Fayette Paris, France
In: Durnten-Zurich [u.a.]: TTP, Trans Tech Publ., 2011; VIII, 116 S.: Ill., graph. Darst. - (Key engineering materials; 478)

Mechanics of viscoelastic plates made of FGMs
In: Computational modelling and advanced simulations. - Dordrecht [u.a.] : Springer, S. 33-48, 2011

Zadači nanomechaniki nanoporistych obʺektov
In: Vestnik INŽĖKONA. - Sankt-Peterburg : Univ.Vestnik INŽĖKONA / Serija Techničeskie nauki, 8, S. 3-5, 2011

Conservation laws and prediction methods for stress concentration fields
In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355

Mechanics of advanced materials for lightweight structures
In: Proceedings of the Institution of Mechanical Engineers. - Los Angeles, Calif. [u.a.] : SageProceedings of the Institution of Mechanical Engineers / C, Bd. 225.2011, 11, S. 2481-2496

On the shell theory on the nanoscale with surface stresses
In: International journal of engineering science. - Oxford [u.a.] : Elsevier Science, Bd. 49.2011, 12, S. 1294-1301

On the spectrum and stiffness of an elastic body with surface stresses
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 91.2011, 9, S. 699-710

Konvexe und nichtkonvexe Fließflächen
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 75.2011, 2, S. 73-92

On the dynamical theory of thermoelastic simple shells
In: Zeitschrift für angewandte Mathematik und Mechanik : ZAMM. - Weinheim : Wiley-VCH, Bd. 91.2011, 6, S. 443-457

The Korn-type inequality in a Cosserat model for thin thermoelastic porous rods
In: Meccanica. - Dordrecht [u.a.] : Springer Science + Business Media B.V, insges. 6 S., 2011

Theory of thin thermoelastic rods made of porous materials
In: Archive of applied mechanics. - Berlin : Springer, Bd. 81.2011, 10, S. 1365-1391

A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature
In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597

Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature
In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208

Strength hypotheses - a never ending story
In: Czasopismo techniczne. - Kraków : [s.n.], Bd. 107.2011, 20, S. 5-15

Analysis of the deformation of multi-layered orthotropic cylindrical elastic shells using the direct approach
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 29-52, 2011 - (Advanced structured materials; 15)

Analysis of chip damage risk in thermosonic wire bonding
In: Advanced computational engineering and experimenting. - Durnten-Zurich [u.a.] : TTP, Trans Tech Publ., S. 75-80, 2011 - (Key engineering materials; 478)

Thermal stress and strain of solar cells in photovoltaic modules
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 453-468, 2011 - (Advanced structured materials; 15)

Strength hypothesis applied to hard foams
In: Advances in experimental mechanics VIII. - Durnten-Zuerich [u.a.] : ttp, Trans Tech Publ., S. 99-104, 2011 - (Applied mechanics and materials; 70)

A variationally consistent derivation of microcontinuum theories
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)

Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)

Acceleration waves and ellipticity in thermoelastic micropolar media
In: Archive of applied mechanics. - Berlin : Springer, Bd. 80.2010, 3, S. 217-227

On the effective stiffness of plates made of hyperelastic materials with initial stresses
In: International journal of non-linear mechanics. - Amsterdam : Elsevier Science, Bd. 45.2010, 10, S. 976-981

On the existence of solution in the linear elasticity with surface stresses
In: ZAMM. - Berlin : Wiley-VCH, Bd. 90.2010, 3, S. 231-240

On generalized cosserat-type theories of plates and shells - a short review and bibliography
In: Archive of applied mechanics. - Berlin : Springer, Bd. 80.2010, S. 73-92

Modelling of low cycle fatigue for an aluminum alloy at elevated temperature
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 22-24, 2010

On the shell and plate theories with surface stresses
In: Shell structures: theory and applications. - Boca Raton [u.a.] : CRC Press,Taylor & Francis Group, S. 47-50, 2010

Stress range dependent creep and damage - experimentel observations and their phenomenological description
In: Finite plasticity and visco-plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, S. 55-57, 2010

Continuous dependence and instability in the linear theory of elastic shells
In: Shell structures: theory and applications. - Boca Raton [u.a.] : CRC Press,Taylor & Francis Group, S. 55-58, 2010

Eigen-vibrations of plates made of functionally grades material
In: Computers, materials & continua. - Encino, Calif. : Tech Science Press, Bd. 9.2009, 2, S. 153-177

Linear theory of shells taking into account surface stresses
In: Doklady physics. - New York, N.Y : Pleiades Publ, Bd. 54.2009, 12, S. 531-535

On the bending of viscoelastic plates made of polymer foams
In: Acta mechanica. - Wien : Springer, Bd. 204.2009, S. 137-154

On the contributions of Pavel Andreevich Zhilin to mechanics
In: Technische Mechanik. - Magdeburg : Magdeburger Verein für Techn. Mechanik, Bd. 29.2009, 2, S. 115-134

On the linear theory of micropolar plates
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 4, S. 242-256

Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 10, S. 823-832

Some remarks on the paper "A unified tensor approch to the analysis of mechanical systems" by A. A. Fogarsy and M. R. Smith
In: Proceedings of the Institution of Mechanical Engineers. - Los Angeles, Calif. [u.a.] : SageProceedings of the Institution of Mechanical Engineers / C, Bd. 223.2009, S. 143-155

O vlijanii poverchnostnogo natjaženija na ėffektivnuju žestkostʹ nanorazmernych plastin
In: Doklady Akademii Nauk // Rossijskaja Akademija Nauk. - Moskva : Nauka, Bd. 424.2009, 5, S. 618-620

The influence of surface tension on the effective stiffness of nanosize plates
In: Doklady physics. - New York, N.Y : Pleiades Publ, Bd. 54.2009, 2, S. 98-100

Aktuelle Trends beim Einsatz von Festigkeitshypothesen
In: Konstruktion. - Düsseldorf : Springer-VDI-Verl, Bd. 61.2009, 5, S. 59-66

Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 45.2009, 3, S. 249-256

Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 45.2009, 3, S. 367-378

Creep analysis with a stress range dependent constitutive model
In: Archive of applied mechanics. - Berlin : Springer, Bd. 79.2009, S. 619-630

Entwicklung einer Beschreibungsmethodik für das mechanische Verhalten unverstärkter Thermoplaste bei hohen Deformationsgeschwindigkeiten
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2009; Online-Ressource (110 S. = 13,03 mb)

Körperschallentstehung im Fahrzeugcrash - ein Beitrag zur Verbesserung der Unfallerkennung
In: Halle, Univ., Zentrum für Ingenieurwissenschaften, Diss., 2009; Online-Ressource (VIII, 106 S.): graph. Darst., Ill.

A new model for viscoelastic plates made of FGMS
In: Full text of papers // International Conference on Computational Modelling and Advanced Simulations, CMAS 2009, June 30 - July 3, 2009, Bratislava, Slovakia. - Bratislava, S. 1-10

Creep analysis for a wide stress range based on stress relaxation experiments
In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008. - Singapore [u.a.] : World Scientific, S. 41-46, 2009

Fundamental forms of strength hypotheses
In: Proceedings of XXXVII Summer School-Conference \"Advanced Problems in Mechanics\", APM \'2009. - St. Petersburg, S. 32-45

On the time-dependent behavior of FGM plates
In: Advances in strength of materials. - Stafa-Zurich [u.a.] : ttp, Trans Tech Publ., S. 63-70, 2009

The equivalent stress concept past, present and future
In: Macro-to-nano-scale inelastic of materials. - Fulton, Md. : NEAT Press, S. 88-90, 2009

Configurational forces in the theory of two-phase plates
In: IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics. - Dordrecht [u.a.] : Springer, S. 121-130, 2009

On the eigenfrequencies of an ordered system of nanoobjects
In: IUTAM Symposium on Modelling Nanomaterials and Nanosystems. - [Dordrecht] : Springer, S. 123-132, 2009

Anwendung der Unified Strength Theory (UST) von Mao-Hong Yu auf unverstärkte Kunststoffe
In: 12. Tagung Problemseminar \"Deformation und Bruchverhalten von Kunststoffen\". - Merseburg, S. 1-8, 2009

Unified representation and evaluation of the strength hypotheses
In: Proceedings // 12th International Conference on Fracture. - Ottawa : NRCanCANMET, 2009., S. 1-10

Ermüdungsverhalten von AlSi12CuNiMg unter niederzyklischer Beanspruchung bei erhöhter Temperatur
In: Fortschritte der Kennwertermittlung für Forschung und Praxis. - Düsseldorf : Stahleisen, S. 163-167, 2009 ; Kongress: Tagung Werkstoffprüfung; (Bad Neuenahr) : 2009.12.03-04

Modeling of stress range dependent creep and damage for the structural analysis
In: Creep & fracture in high temperature components. - Lancaster, Pa. : DEStech Publ., S. 974-984, 2009

Analysis of the viscoelastic behavior of plates made of functionally graded materials
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 88.2008, 5, S. 332-341

Direct approach-based analysis of plates composed of functionally graded materials
In: Archive of applied mechanics. - Berlin : Springer, Bd. 78.2008, S. 775-794

On the constitutive inequalities and acceleration waves in micropolar media
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH, Bd. 8.2008, 1, S. 10417-10418

Oscillations of a magneto-sensitive elastic sphere
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 88.2008, 6, S. 497-506

Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges
In: Acta mechanica. - Wien : Springer, Bd. 195.2008, S. 263-274

Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 72.2008, S. 183-191

Effective properties of plates made from functionally graded materials
In: Nonlinear dynamics of composite and smart structures. - Lublin, S. 67-70, 2008

On the application of Zhilin's theory of simple shells to plates made of functionally graded materials
In: Proceedings of the XXXVI Summer School \"Advanced Problems in Mechanics\", APM \'2008. - St. Petersburg, S. 8-49

On the different possibilities to derive plate and shell theories
In: IUTAM Symposium on Relations of Shell, Plate, Beam, and 3D Models. - [New York] : Springer, S. 37-47, 2008

Analysis of homogeneous and non-homogeneous plates
In: Lecture notes on composite materials. - [New York, NY] : Springer, S. 1-36, 2008

Fiber rotation motion in homogeneous flows
In: Micro-macro-interactions. - Berlin [u.a.] : Springer, S. 133-142, 2008

In memory of Pavel Andreevich Zhilin
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 87.2007, 2, S. 79-80

Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows
In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 87.2007, 2, S. 81-93

Numerical benchmarks for creep-damage modeling
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH, Bd. 7.2007, S. 4040021-4040022, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/121371335/PDFSTART

Structural elastic and creep models of a UD composite in longitudinal shear
In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 43.2007, 4, S. 289-298

Strukturnye modeli uprugosti i polzucesti odnonapravlennogo kompozita pri prodol'nom sdvige
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 43.2007, 4, S. 437-448

Modelling principles for spatial material behaviour
In: Proceedings // 8th International Conference on Multiaxial Fatigue and Fracture, 2007, S. 1-8

Models for spatial mechanical behaviour on non-reinforced thermoplastics
In: Tagungsskript // 11. Problemseminar "Deformation und Bruchverhalten von Kunststoffen". - Merseburg : Institut für Polymerwerkstoffe e.V. an der Martin-Luther-Universität Halle-Wittenberg, 2007, S. 316-323

On the unified representation of models for isotropic material behavior
In: Proceedings of 9th International Symposium on Plasticity and Impact Mechanics, Implast 2007. - Bochum : Univ. Press, S. 351-360

Potential based phenomenological models of the inelastic material behaviour
In: Plasticity of conventional and emerging materials. - Fulton, Md. : NEAT Press, 2007, S. 244-246

Modeling of creep for structural analysis - with 5 tables
In: Berlin [u.a.]: Springer, 2007. - XII, 220 S.: zahlr. graph. Darst. - (Foundations of engineering mechanics) ; Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications

Long term creep analysis of pipe bends in a steam transfer line at elevated temperature
In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2. - Stafa-Zürich [u.a.] : Trans Tech Publ., 2007, S. 795-802

Ob izgibe plastinok iz gradientnych materialov
In: Sovremennye problemy mechaniki splosnoj sredy ; T. 1. - Rostov-na-Donu : CVVR, 2007, S. 28-33

Ausrichtung von Partikeln in stationären Strömungsfeldern
In: Proceedings in applied mathematics and mechanics . - Weinheim [u.a.] : Wiley-VCH, Bd. 6.2006, S. 423-424, unter URL: http://www3.interscience.wiley.com/cgi-bin/fulltext/114078368/PDFSTART!

A note on transversely-isotropic invariants
In: Zeitschrift für angewandte Mathematik und Mechanik . - Weinheim : Wiley-VCH, Bd. 86.2006, 2, S. 162-168

On the free particle rotation in a polymer melt
In: Strojnícky casopis . - Bratislava, Bd. 57.2006, 2, S. 112-126

Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen
In: Zeitschrift Kunststofftechnik . - München : Hanser, Bd. 2.2006, 6, S. 1-21, unter URL: http://www.kunststoffe.de/directlink.asp?WAK060603

Steady-state creep analysis of pressurized pipe weldments by perturbation method
In: International journal of solids and structures . - New York, NY [u.a.] : Elsevier, Bd. 43.2006, S. 6908-6920

Festigkeitslehre - mit 15 Tabellen, 104 Aufgaben und 135 Beispielen mit Lösungen
In: Wiesbaden: Teubner, 2006. - XIV, 382 S.: Ill., graph. Darst.

Advanced engineering creep analysis of structural elements
In: Summer School Advanced Problems in Mechanics <34, 2006, Sankt-Peterburg> : Proceedings of the XXXIV Summer School &quot;Advanced Problems in Mechanics&quot;, APM \'2006 . - St. Petersburg : Russian Akad. of Sciences, ISBN 5-9888300-9-9, S. 15-32

Creep modeling and long term structural analysis of plates and shells
In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity & viscoplasticity, and metal forming ; proceedings of Plasticity \'06, the Twelfth International Symposium on Plasticity and its Current Applications . - Fulton, Md. : NEAT Press, ISBN 0-9659463-6-3, 2006, S. 580-582

Failure criteria for composites - current state and future trends
In: Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials <2005, Kazimierz Dolny> : IUTAM Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials . - Dordrecht : Springer, ISBN 1-402-04565-4, 2006, S. 285-292

Multiscale computational FEM-based engineering approach to modelling of damping behavior of CNT-reinforced composite materials
In: Fracture of nano and engineering materials and structures; Proceedings: . - Dordrecht [u.a.] : Springer, 2006, S. 1-23

On the contributions of P. A. Zhilin to the shell theory
In: Summer School Advanced Problems in Mechanics <34, 2006, Sankt-Peterburg> : Proceedings of the XXXIV Summer School &quot;Advanced Problems in Mechanics&quot;, APM \'2006 . - St. Petersburg : Russian Akad. of Sciences, ISBN 5-9888300-9-9, S. 1-14

On the principles of description of non-classical creep behaviour
In: Volume of abstracts // 35th Solid Mechanics Conference, 35th SolMech 2006, Kraków, September 4 - 8, 2006 . - Warszawa, S. 117-118

Phenomenological material models for non-reinforced thermoplastics
In: International Conference on Deformation, Yield and Fracture of Polymers <13, 2006, Kerkrade> : Book of abstracts // DYFP 2006, 13th International Conference on Deformation, Yield and Fracture of Polymers . - Eindhoven : Materials Technology Group, Eindhoven University of Technology, S. 219-222

Power plant component design using creep-damage analysis
In: Proceedings of 2006 ASME International Mechanical Engineering Congress & Exposition . - New York : ASME, ISBN 0-7918-3790-4, S. 1-10

Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva
In: Vestnik Nacional\'nogo Techniceskogo Universiteta \"ChPI\". - Char\'kov : Univ., 2005, S. 57-66

Continuum mechanics approach and comutational modelling of submicrocrystalline and nanoscale materials
In: Fullerenes, nanotubes and carbon nanostructures. - New York, NY [u.a.] : Marcel Dekker, Bd. 13.2005, S. 313-329

Nichtklassische Modellierungskonzepte für ebene Flächentragwerke
In: Naucni trudove // Rusenski Universitet \"Angel K°ancev\". - Ruse, Bd. 44.2005, S. 743-746

On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics
In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339

A phenomenological model for anisotropic creep in a multipass weld metal
In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819

Numerical treatment of finite rotation for a cylindrical particle
In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161

Modelling of anisotropic creep in a multi-pass weld metal
In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387

A direct approach to the formulation of constitutive equations for rods and shells
In: Shell structures. - London [u.a.] : Taylor & Francis, 2005, S. 87-90

Modelling of anisotropic behavior in fiber and particle reinforced composites
In: Multiscale modelling of damage and fracture processes in composite materials. - Wien [u.a.] : Springer, 2005, S. 1-62

Chemo-mechanical couplings in porous media geomechanics and biomechanics: Wien [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 3, S. 221

Cosserat theories: shells, rods, and points : Dordrecht [u.a.] : Kluwer, 2000
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 4, S. 303

Engineering damage mechanics: ductile, creep, fatigue and brittle failures : Berlin [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 11, S. 792

Formeln und Aufgaben zur technischen Mechanik, Band 3: Berlin [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 12, S. 895

Höhere Mathematik für Naturwissenschaftler und Ingenieure: München : Spektrum Akad.-Verl., 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 4, S. 304

Mechanics and thermomechanics of rubberlike solids: Wien [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 7, S. 489

Micropolar theory of elasticity: Berlin [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 1, S. 75

Multi-scale modelling for structures and composites: Dordrecht [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 10, S. 720

Plasticity: a treatise on finite deformation of heterogeneous inelastic materials : Cambridge [u.a.] : Cambridge Univ. Press, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 8, S. 556

Theory of elasticity: Berlin [u.a.] : Springer, 2005
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 121, S. 903

Theory of metal forming plasticity: Berlin [u.a.] : Springer, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 2, S. 131

Trends in nanoscale mechanics: analysis of nanostructured materials, and multi-scale modeling : Dordrecht [u.a.] : Kluwer, 2003
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH, Bd. 85.2005, 3, S. 188

Edge effects in moderately thick plates under creep damage conditions
In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263

Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228

Boundary layer in a moderately thick plates under creep-damage conditions
In: Proceedings of the 2004 International Conference on Computational & Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116

Simulation of the material behavior from the engineering point of view : classical approaches and new trends
In: Computational materials science. - Berlin [u.a.] : Springer. - 2004, S. 235-257

The Theory of simple elastic shells
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 1-12

Schädigungscharakterisierung der Implantat-Knochen-Grenzfläche
In: Grenzflächen bei Implantaten. - Berlin : DVM, 2004, S. 9-17

Shell and solid type finite element analysis of creep in thin-walled structures
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176

Mechanics of composite structural elements : with 23 tables
In: Berlin [u.a.] : Springer, 2004. - XVIII, 468 S. : graph. Darst.. - (Engineering online library)

Achenbach, Jan D., Reciprocity in elastodynamics : Cambridge [u.a.] : Cambridge Univ. Press, 2003
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 775

Dankert, Jürgen; Dankert, Helga, Technische Mechanik : Statik, Festigkeitslehre, Kinematik/Kinetik : Stuttgart [u.a.] : Teubner, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 775

Hagedorn, Peter, Technische Mechanik, Band 1 - 3 : Frankfurt am Main [u.a.] : Deutsch, 2003
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 774

Kassner, Michael E.; Perez-Prado, Maria-Teresa, Fundamentals of creep in metals and alloys : Amsterdam [u.a.] : Elsevier, 2004
In: Zeitschrift für angewandte Mathematik und Mechanik. - Potsdam [u.a.] : Wiley-VCH. - Bd. 84.2004, 10-11, S. 775-776

A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions
In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570

Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics
In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352

Teorija polzucesti - aktual'nye problemy i prilozenija
In: Prikladnaja mechanika. - Kiev : Izd. Naukova Dumka. - Bd. 39.2003, 6, S. 3-33

Topical problems and applications of creep theory
In: International applied mechanics. - New York, NY [u.a.] : Consultants Bureau. - Bd. 39.2003, 6, S. 631-655

Modern trends in composite laminates mechanics : [lecture material that was presented in a five-day course on "Modern Trends in Composite Laminates Mechanics" held from July 22 to 26, 2002 at CISM (International Centre for Mechanical Sciences) in Udine, Italy]
In: Wien [u.a.] : Springer, 2003. - 294 S. : Ill., graph. Darst.. - (CISM courses and lectures ; 448)

A micro-polar theory for binary media with application to flow of fiber suspensions
In: Proceedings of the XXX Summer School \"Advanced Problems in Mechanics\", APM \'2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62

A unified phenomenological limit state criterion for ductile and brittle materials
In: Plasticity and impact mechanics. - New Delhi : Phoenix Publ. House. - 2003, S. 42-51

On the application of anisotropic creep models to the analysis of thin plates
In: Dislocations, plasticity and metal forming. - Fulton, Md. : NEAT Press. - 2003, S. 118-120

On the predictions of fiber orientation and elastic properties of injection molded-walled parts
In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21

On the extension of creep-damage theories for isotropic materials to the case of anisotropic materials
In: Anisotropic behaviour of damaged materials [based on the keynote lectures delivered during the International Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Kraków-Przegorzaly, Poland, September 9 - 11, 2002]. - Berlin [u.a.] : Springer. - 2003/chapter 8

Single layer modelling and effective stiffness estimations of laminated plates
In: Modern trends in composite laminates mechanics. - Wien [u.a.] : Springer. - 2003, S. 1-68