Numerical and experimental analysis of elastic three-layer plate under static and low velocity impact loading

Altenbach, Holm; Breslavsky, Dmytro; Konkin, Stanislav; Lysenko, Volodymyr; Naumenko, Konstantin

In: Progress in Structural Mechanics , 1st ed. 2024. - Cham : Springer International Publishing ; Altenbach, Holm, S. 1-18 - ( Advanced structured materials book series; volume 199)

Publikationslink

The impact of mesh generation in finite element simulations on stress gradient and calculated fatigue strength

Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin

In: Collaborative Research Advancing Engineering Solutions for Real-World Challenges , 1st ed. 2024. - Cham : Springer Nature Switzerland ; Öchsner, Andreas, S. 111-121

Publikationslink

Notch effect under cyclic loading of electrical steel strips

Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin

In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 377-400 - (Advanced structured materials; volume 203)

Publikationslink

M-integral for finite anti-plane shear of a nonlinear elastic matrix with rigid inclusions

Eremeyev, Victor A.; Naumenko, Konstantin

In: International journal of engineering science - New York, NY [u.a.] : Science Direct, Bd. 196 (2024), Artikel 104009, insges. 14 S.

Publikationslink

Fortgeschrittene Methoden für die Schädigungsanalyse von Glaslaminaten bei dynamischen Beanspruchungen

Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Riedel, Kristin; Würkner, Mathias

In: Glasbau ... ; 2023 - Berlin : Ernst & Sohn ; Weller, Bernhard *195X-*, S. 335-347

Development of a microstructure-based finite element model of thermomechanical Response of a fully metallic composite phase change material

Gariboldi, Elisabetta; Molteni, Matteo; Vargas Vargas, Diego André; Naumenko, Konstantin

In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 131-142 - (Advanced structured materials; volume 194)

Publikationslink

Various state-of-the-art methods for creep evaluation of power plant components in a wide load and temperature range

Blum, Eike; Kostenko, Yevgen; Naumenko, Konstantin

In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 69-82 - (Advanced structured materials; volume 194)

Publikationslink

Creep mechanics - some historical remarks and new trends

Altenbach, Holm; Eisenträger, Johanna; Knape, Katharina; Naumenko, Konstantin

In: Creep in Structures VI , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 57-68 - (Advanced structured materials; volume 194)

Publikationslink

A penalty method for coupling of finite-element and peridynamic models

Pernatii, Anna; Gabbert, Ulrich; Naumenko, Konstantin; Hesse, Jan-Timo; Willberg, Christian

In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 22 (2023), Heft 1, Artikel e202200151, insges. 6 S.

Publikationslink

Closed-form series solutions to peridynamic rod equations - influence of kernel function

Naumenko, Konstantin; Yang, Zhenghoa; Ma, Chien-Ching; Chen, Yanguang

In: Technische Mechanik - Magdeburg : Inst., Bd. 43 (2023), Heft 2, S. 259-270

Publikationslink

Closed-form analytical solutions for the deflection of elastic beams in a peridynamic framework

Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Chen, Yang

In: Applied Sciences - Basel : MDPI, Bd. 13 (2023), Heft 18, Artikel 10025, insges. 20 S.

Publikationslink

Peridynamic analysis of curved elastic beams

Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda

In: European journal of mechanics / A - Paris : Elsevier, Bd. 101 (2023), Artikel 105075

Publikationslink

Creep in Structures VI - IUTAM Symposium Proceedings

Altenbach, Holm; Naumenko, Konstantin

In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XX, 334 p. 184 illus., 143 illus. in color.) - (Advanced Structured Materials; 194), ISBN: 978-3-031-39070-8

Publikationslink

Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten

Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin

In: [Heidelberg]: Springer Vieweg, 2023, 1 Online-Ressource (xvi, 581 Seiten, 174 Abb., 53 Abb. in Farbe), ISBN: 978-3-662-68391-0

Publikationslink

Preface

Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas

In: Material modeling and structural mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. vii-xi - (Advanced Structured Materials; 161)

Preface

Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas

In: Material modeling and structural mechanics - Cham: Springer; Altenbach, Holm *1956-* . - 2022, S. vii-xi

Publikationslink

Influence of thermal stabilisation on the thermal regime in the strapdown inertial navigation system

Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Altenbach, Holm

In: Material Modeling and Structural Mechanics - Cham: Springer International Publishing; Altenbach, Holm . - 2022, S. 177-188 - (Advanced structured materials; volume 161)

Publikationslink

Damage patterns in float glass plates - experiments and peridynamics analysis

Naumenko, Konstantin; Pander, Matthias; Würkner, Mathias

In: Theoretical and applied fracture mechanics - Amsterdam: North-Holland, Bd. 118 (2022)

Publikationslink

Analytical solution of the peridynamic equation of motion for a 2-dimensional rectangular membrane

Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin; Vazic, Bozo

In: Journal of peridynamics and nonlocal modeling - [Cham]: Springer International Publishing . - 2022, insges. 17 S.

Publikationslink

Analytical solution of 1-dimensional peridynamic equation of motion

Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin

In: Journal of peridynamics and nonlocal modeling - [Cham]: Springer International Publishing . - 2022, insges. 19 S.

Publikationslink

Elastic plate under low velocity impact: Classical continuum mechanics vs peridynamics analysis

Altenbach, Holm; Larin, Oleksiy; Naumenko, Konstantin; Sukhanova, Olha; Würkner, Mathias

In: AIMS Materials Science - Springfield, Mo.: AIMS Press, Bd. 9 (2022), 5, S. 702-718

Publikationslink

Beam buckling analysis in peridynamic framework

Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda

In: Archive of applied mechanics - Berlin : Springer . - 2022, insges. 12 S.

Publikationslink

Some analytical solutions to peridynamic beam equations

Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda

In: ZAMM - Berlin : Wiley-VCH, Bd. 102 (2022), Heft 10, Artikel e202200132, insges. 16 S.

Publikationslink

Strength analysis of laminated glass/EVA interfaces - microstructure, peel force and energy of adhesion

Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Thavayogarajah, Nishanth; Würkner, Mathias

In: Composite structures - Amsterdam: Elsevier, Bd. 297 (2022)

Publikationslink

A non-linear direct peridynamics plate theory

Naumenko, Konstantin; Eremeyev, Victor A.

In: Composite structures - Amsterdam: Elsevier, Bd. 279 (2022)

Publikationslink

Some closed form series solutions to peridynamic plate equations

Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Altenbach, Holm; Oterkus, Erkan; Oterkus, Selda

In: Mechanics research communications - Amsterdam [u.a.]: Elsevier . - 2022

Publikationslink

Identification of non-local force interactions in self-adhesive polymeric films

Bagheri, Behnaz; Naumenko, Konstantin

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (ix, 96 Blätter, 96,02 MB) [Literaturverzeichnis: Blatt 87-96]

Publikationslink

Material Modeling and Structural Mechanics

Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas

In: Cham: Imprint: Springer, 2022., 1st ed. 2022., 1 Online-Ressource(XXII, 336 p. 163 illus., 131 illus. in color.) - (Springer eBook Collection; Advanced Structured Materials; 161)

Publikationslink

Dynamics of curved laminated glass composite panels under impact loading

Sukhanova, Olha; Larin, Oleksiy; Naumenko, Konstantin; Altenbach, Holm

In: Nonlinear Mechanics of Complex Structures - From Theory to Engineering Applications - Cham: Springer International Publishing; Altenbach, Holm . - 2021, S. 91-101 - ( Advanced structured materials; volume 157)

Publikationslink

Inelastic behavior of polyoxymethylene for wide strain rate and temperature ranges - constitutive modeling and identification

Filanova, Yevgeniya; Hauptmann, Johannes; Längler, Frank; Naumenko, Konstantin

In: Materials - Basel: MDPI, Bd. 14 (2021), Heft 13, Artikel 3667, insges. 17 S.

Publikationslink

Temperature resistance of Mo3Si - phase stability, microhardness, and creep properties

Kauss, Olha; Obert, Susanne; Bogomol, Iurii; Wablat, Thomas; Siemensmeyer, Nils; Naumenko, Konstantin; Krüger, Manja

In: Metals - Basel: MDPI, Bd. 11 (2021), 4, insges. 17 S.

Publikationslink

Experimental analysis and constitutive modeling of anisotropic creep damage in a wrought age-hardenable Al alloy

Naumenko, Konstantin; Gariboldi, Elisabetta

In: Engineering fracture mechanics - Kidlington: Elsevier Science . - 2021

Publikationslink

Closed-form quaternion representations for rigid body rotation - application to error assessment in orientation algorithms of strapdown inertial navigation systems

Plaksiy, Yuriy; Breslavsky, Dmitriy; Homozkova, Irina; Naumenko, Konstantin

In: Continuum mechanics and thermodynamics - analysis of complex materials and judicious evaluation of the environment - Berlin: Springer, Bd. 33 (2021), Heft 4, S. 1141-1160

Publikationslink

Cohesive zone models-theory, numerics and usage in high-temperature applications to describe cracking and delamination

Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm

In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2019, S. 131-168, 2020 - (Advanced structured materials; 117)

Publikationslink

Laminated plates with non-linear visco-elastic interlayer - the governing equations

Naumenko, Konstantin; Altenbach, Holm

In: Analysis of shells, plates, and beams - Cham: Springer; Altenbach, Holm . - 2020, S. 297-310 - (Advanced structured materials; volume 134)

Publikationslink

Heat transfer analysis in the strapdown inertial unit of the navigation system

Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Schastlivets, Kyrill Yu.

In: Plasticity, damage and fracture in advanced materials - Cham: Springer, 2020; Altenbach, Holm . - 2020, S. 119-133

Publikationslink

Analysis of a power plant rotor made of tempered martensitic steel based on a composite model of inelastic deformation

Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm

In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 1-34 - (Advanced structured materials; 117)

Publikationslink

Structural analysis of gas turbine blades made of Mo-Si-B under stationary thermo-mechanical loads

Kauss, Olha; Naumenko, Konstantin; Hasemann, Georg; Krüger, Manja

In: Advances in mechanics of high-temperature materials - Cham: Springer . - 2020, S. 79-91 - (Advanced structured materials; 117)

Publikationslink

A direct approach to evaluate interaction forces between self-adhesive polymeric films subjected to T-peeling

Naumenko, Konstantin; Bagheri, Behnaz

In: Archive of applied mechanics - Berlin: Springer, Bd. 91 (2021), S. 629-641

Publikationslink

Stress-regime-dependence of inelastic anisotropy in forged age-hardening aluminium alloys at elevated temperature - constitutive modeling, identification and validation

Naumenko, Konstantin; Gariboldi, Elisabetta; Nizinkovskyi, Rostyslav

In: Mechanics of materials: forum for theoretical, experimental and field advances in mechanics of flow, fracture and general constitutive behavior of geophysical, geotechnical and technological materials - Amsterdam: Elsevier, Volume 141(2020), Article 103262

Publikationslink

Subclasses of mechanical problems arising from the direct approach for homogeneous Plates

Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm

In: Recent developments in the theory of shells - Springer International Publishing, S. 43-63, 2019 - (Advanced Structured Materials; 110)

Publikationslink

A damage mechanics based cohesive zone model with damage gradient extension for creep-fatigue-interaction

Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm

In: Key engineering materials: KEM - Uetikon a.S.: Trans Tech Publications, 1986, Bd. 794.2019, S. 253-259

Publikationslink

The problems of transient heat transfer of electroconductive bodies in the electromagnetic field

Altenbach, Holm; Naumenko, Konstantin; Lavinsky, Denis; Konkin, Valerii

In: Visnyk Nacionalʹnoho techničnoho universytetu "ChPI" - Charkiv: NTU "ChPI", 2001, Bd. 1.2019, 2, S. 9-13, 2020

On thermal strains and residual stresses in the linear theory of antisandwiches

Javanbakht, Z.; Aßmus, Marcus; Naumenko, Konstantin; Öchsner, A.; Altenbach, Holm

In: ZAMM - Berlin: Wiley-VCH, Volume 99, issue 8 (2019), Article e2019000062, insgesamt 17 Seiten

Publikationslink

Thermomechanical analysis of a steam turbine rotor

Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm

In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.]: Wiley-VCH, Volume 19, issue 1 (2019), article e201900361

Publikationslink

Numerical analysis of a steam turbine rotor subjected to thermo-mechanical cyclic loads

Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm

In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39.2019, 3, S. 261-281

Publikationslink

The potential of mechanical alloying to improve the strength and ductility of Mo-9Si-8B-1Zr alloys - experiments and simulation

Krüger, Manja; Kauss, Olha; Naumenko, Konstantin; Burmeister, C.; Wessel, E.; Schmelzer, Janett

In: Intermetallics - Amsterdam [u.a.]: Elsevier Science, Vol. 113 (2019), Artikel 106558

Publikationslink

Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads

Kauss, Olha; Tsybenko, H.; Naumenko, Konstantin; Hütter, Sebastian; Krüger, Manja

In: Computational materials science - Amsterdam [u.a.]: Elsevier Science, Bd. 165 (2019), S. 129-136

Publikationslink

A generalized framework towards structural mechanics of three-layered composite structures

Aßmus, Marcus; Naumenko, Konstantin; Öchsner, Andreas; Eremeyev, Victor; Altenbach, Holm

In: Technische Mechanik - wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik - Magdeburg: Inst., Bd. 39 (2019), 2, S. 202-219

Publikationslink

Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling

Bagheri, Behnaz; Schulze, Stefan-H.; Naumenko, Konstantin; Altenbach, Holm

In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 216.2019, S. 222-227

Publikationslink

Advances in mechanics of high-temperature materials

Naumenko, Konstantin; Krüger, Manja

In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 117), ISBN: 978-3-030-23869-8

Publikationslink

Modeling High Temperature Materials Behavior for Structural Analysis. Part 2: Solution procedures and structural analysis examples

Naumenko, Konstantin; Altenbach, Holm

In: Cham: Springer, 2019, 1 Online-Ressource, Illustrationen - (Advanced structured materials; 112)

Publikationslink

Angular velocities, twirls, spins and rotation tensors in the continuum mechanics revisited

Naumenko, Konstantin; Altenbach, Holm

In: Generalized Models and Non-classical Approaches in Complex Materials 1 - Cham: Springer International Publishing, 2018 . - 2018, S. 621-632 - (Advanced Structured Materials; 89)

Publikationslink

Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests

Nordmann, Joachim; Thiem, Philipp; Cinca, Nuria; Naumenko, Konstantin; Krüger, Manja

In: The journal of strain analysis for engineering design : JSA - London : Sage Publ., Bd. 53.2018, 4, S. 255-265

Publikationslink

Mechanical models and finite-element approaches for the structural analysis of photovoltaic composite structures - a comparative study

Haghi, M.; Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm

In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 54 (2018), Heft 4, S. 415-430

Publikationslink

Verformungsanalyse elektrisch leitender metallischer Bauteile bei Magnetimpulsbearbeitung

Altenbach, Holm; Konkin, Valery; Lavinsky, Denis; Morachkovsky, Oleg; Naumenko, Konstantin

In: Forschung im Ingenieurwesen - research journal: research journal - Berlin: Springer, 1930 . - 2018[Online first]

Publikationslink

Two-time-scales and time-averaging approaches for the analysis of cyclic creep based on ArmstrongFrederick type constitutive model

Altenbach, Holm; Breslavsky, Dmitry; Naumenko, Konstantin; Tatarinova, Oksana

In: Proceedings of the Institution of Mechanical Engineers / C/ Institution of Mechanical Engineers - London: Sage Publ., 1983 . - 2018[Online first]

Publikationslink

Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels

Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm

In: Acta mechanica - Wien: Springer, 1965, Bd. 229.2018, 7, S. 3051-3068

Publikationslink

Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges

Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm

In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 1965, Bd. 53.2018, 3, S. 156-177

Publikationslink

Adaption of a Carreau fluid law formulation for residual stress determination in rotary friction welds

Rößler, Christoph; Schmicker, David; Naumenko, Konstantin; Woschke, Elmar

In: Journal of materials processing technology - Amsterdam [u.a.]: Elsevier, Bd. 252.2018, S. 567-572

Publikationslink

Modeling inelastic behaviour of Al-rich Ti-Al alloys at ultra-high homologous temperature

Chowdhury, Helal; Naumenko, Konstantin; Krüger, Manja

In: Barleben: docupoint Verlag, 2018, 153 Seiten, Illustrationen, Diagramme - (Docupoint Wissenschaft; Micro-macro transactions; Volume 30)

Advances in mechanics of materials and structural analysis - in honor of Reinhold Kienzler

Altenbach, Holm; Jablonski, Frank; Müller, Wolfgang H.; Naumenko, Konstantin; Schneider, Patrick; Kienzler, Reinhold

In: [s.l.]: Springer-Verlag, 2018, 1 Online-Ressource (PDF, 19415 KB, 461 S.), ISBN: 3-319-70562-8

Publikationslink

Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system

Popovych, Olha; Bogomol, Iurii; Naumenko, Konstantin; Krüger, Manja

In: Konferenz: Intermetallics 2017, Intermetallics 2017 - Bad Staffelstein : Educational Center Kloster Banz, S. 115-116

Publikationslink

Fracture mechanics characterisation of peelfilms

Nase, M.; Rennert, M.; Henning, S.; Zankel, A.; Naumenko, Konstantin; Grellmann, W.

In: Deformation and fracture behaviour of polymer materials - Cham: Springer-Verlag, S. 271-281, 2017 - (Springer series in material science; 247)

Publikationslink

Prediction of stress relaxation in power plant components based on a constitutive model

Kostenko, Yevgen; Naumenko, Konstantin

In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines - New York, N.Y: American Society of Mechanical Engineers, 2017, Paper No. GT2017-63608, S. V008T29A017, insgesamt 8 S.[Konferenz: ASME Turbo Expo 2017, Charlotte, North Carolina, USA, 26-30 June, 2017]

Publikationslink

Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln

Popovych, Olha; Naumenko, Konstantin; Krüger, Manja

In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017 , korrigierte Auflage - Magdeburg : Universitätsbibliothek, S. 185-192

Publikationslink

Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures

Aßmus, Marcus; Bergmann, Stefan; Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm

In: Mechanics for materials and technologies - Cham, Switzerland : Springer International Publishing ; Altenbach, Holm *1956-* . - 2017, S. 73-122 - (Advanced structured materials; Volume 46)

Publikationslink

On the models of three-layered plates and shells with thin soft core

Eremeyev, Viktor. A.; Naumenko, Konstantin

In: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials - Singapore : Springer , 2017, S. 159-171 - (Advanced Structured Materials; 59)

Publikationslink

Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C

Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja

In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 700.2017, S. 503-511

Publikationslink

Mechanical behaviour of photovoltaic composite structures - influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations

Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm

In: Composites communications - Amsterdam : Elsevier, Bd. 6.2017, S. 59-62

Publikationslink

A homogeneous substitute material for the core layer of photovoltaic composite structures

Aßmus, Marcus; Nordmann, J.; Naumenko, Konstantin; Altenbach, Holm

In: Composites / B - Amsterdam [u.a.]: Elsevier, 1996, Bd. 112.2017, S. 353-372

Publikationslink

Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature

Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja

In: Archive of applied mechanics - Berlin: Springer, insges. 17 S., 2017

Publikationslink

Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading

Aßmus, Marcus; Bergmann, Stefan; Naumenko, Konstantin; Altenbach, Holm

In: Composites communications - Amsterdam : Elsevier, Bd. 5.2017, S. 23-26

Publikationslink

Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry

Chowdhury, Helal; Altenbach, Holm; Krüger, Manja; Naumenko, Konstantin

In: Mechanics of advanced materials and modern processes - Berlin: Springer, 2015, Bd. 3.2017, insges. 20 S.

Publikationslink

A layer-wise theory of shallow shells with thin soft core for laminated glass and photovoltaic applications

Naumenko, Konstantin; Eremeyev, Viktor A.

In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 178.2017, S. 434-446

Publikationslink

Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery

Chowdhury, H.; Naumenko, Konstantin; Altenbach, Holm

In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 146-147 (2018), S. 486-496

Publikationslink

Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel

Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Gariboldi, Elisabetta

In: The journal of strain analysis for engineering design: JSA - London: Sage Publ., 2017

Publikationslink

[Rezension von: Bobaru, Florin, Handbook of Peridynamic Modeling]

Naumenko, Konstantin; Bobaru, Florin

In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 97.2017, 5, S. 616

Publikationslink

A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules

Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm

In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 158.2016, S. 340-358

Publikationslink

Analysis of anisotropic damage in forged Al-Cu-Mg-Si alloy based on creep tests, micrographs of fractured specimen and digital image correlations

Gariboldi, Elisabetta; Naumenko, Konstantin; Ozhoga-Maslovskaja, Oksana; Zappa, Emanuele

In: Materials science and engineering / A - Amsterdam: Elsevier, 1988, Bd. 652.2016, S. 175-185

Publikationslink

Identifying tractionseparation behavior of self-adhesive polymeric films from in situ digital images under T-peeling

Nase, Michael; Rennert, Mirko; Naumenko, Konstantin; Eremeyev, Victor A.

In: Journal of the mechanics and physics of solids - Amsterdam [u.a.]: Elsevier Science, Bd. 91.2016, S. 40-55

Publikationslink

On the choice of the power law flow rule and its consequences in crystal plasticity

Chowdhury, Helal; Altenbach, Holm; Naumenko, Konstantin

In: Key engineering materials - Aedermannsdorf: Trans Tech Publ, Bd. 725.2016, S. 359-365

Advanced Methods of Continuum Mechanics for Materials and Structures

Naumenko, Konstantin; Aßmus, Marcus

In: Singapore: Springer Singapore, 2016, Online-Ressource (XVII, 558 p. 194 illus., 118 illus. in color, online resource) - (Advanced Structured Materials; 60; SpringerLink; Bücher), ISBN: 978-981-10-0959-4

Publikationslink

Advanced Methods of Continuum Mechanics for Materials and Structures

Naumenko, Konstantin; Aßmus, Marcus

In: Singapore: Springer Singapore, 2016, 1 Online-Ressource (555 p) - (Advanced Structured Materials; 60), ISBN: 978-981-10-0959-4

Publikationslink

Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten

Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin

In: Heidelberg: Springer Vieweg, 2016, Online-Ressource (XIX, 531 S. 167 Abb. in Farbe, online resource) - (SpringerLink; Bücher), ISBN: 978-3-662-47230-9

Publikationslink

Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten

Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin

In: Heidelberg: Springer Vieweg, 2016, 1 Online-Ressource (XIX, 531 Seiten), ISBN: 978-3-662-47230-9

Publikationslink

Modeling High Temperature Materials Behavior for Structural Analysis - Part I: Continuum Mechanics Foundations and Constitutive Models

Naumenko, Konstantin; Altenbach, Holm

In: Cham: Imprint: Springer, 2016, Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color, online resource) - (Advanced Structured Materials; 28; SpringerLink; Bücher), ISBN: 978-3-319-31627-7

Publikationslink

Modeling high temperature materials behavior for structural analysis - part I: continuum mechanics foundations and constitutive models

Naumenko, Konstantin; Altenbach, Holm

In: Cham: Imprint: Springer, 2016, 1 Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color) - (Advanced Structured Materials; 28), ISBN: 978-3-319-31627-7

Publikationslink

Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen

Altenbach, Holm; Naumenko, Konstantin

In: Rundbrief// Gesellschaft für Angewandte Mathematik und Mechanik, GAMM - Dresden: GAMM, 2, S. 4-10, 2016

Approximate rules for calculation of notch stresses considering plasticity and creep

Altenbach, Holm; Eisenträger, Johanna; Naumenko, Konstantin

In: Plastic behavior of conventional and advanced materials: theory, experiment, and modeling: proceedings of Plasticity'15: the twenty first International Symposium on Plasticity and its Current Applications / editor: Akhtar S. Khan: proceedings of Plasticity'15: the twenty first International Symposium on Plasticity and its Current Applications/ International Symposium on Plasticity and its Current Applications - Fulton, Maryland, USA: NEAT Press, S. 124-126, 2015Kongress: PLASTICITY' 15 21 (Montego Bay, Jamaica : 2015.01.04-09)

Creep behavior modeling of polyoxymethylene (POM) applying rheological models

Altenbach, Holm; Girchenko, Anna; Kutschke, Andreas; Naumenko, Konstantin

In: Inelastic behavior of materials and structures under monotonic and cyclic loading - Heidelberg [u.a.]: Springer, S. 1-5, 2015 - (Advanced structured materials; 57)

Publikationslink

Analysis of inelastic behavior for high temperature materials and structures

Naumenko, Konstantin; Altenbach, Holm

In: From Creep Damage Mechanics to Homogenization Methods - Cham: Springer; Altenbach, Holm *1956-* . - 2015, S. 241-298 - (Advanced structured materials; 64)

Publikationslink

Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels

Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Köppe, Heinz

In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 96-97 (2015), S. 163-171

Publikationslink

Inelastic deformation of conductive bodies in electromagnetic fields

Altenbach, Holm; Morachkovsky, Oleg; Naumenko, Konstantin; Lavinsky, Denis

In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 28 (2016), Heft 5, S. 1421-1433

Publikationslink

On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer

Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin

In: ZAMM: journal of applied mathematics and mechanics - Berlin: Wiley-VCH, Bd. 95.2015, 10, S. 1004-1011

Publikationslink

A relationship between effective work of adhesion and peel force for thin hyperelastic films undergoing large deformation

Eremeyev, Victor; Naumenko, Konstantin

In: Mechanics research communications - Amsterdam [u.a.]: Elsevier, Bd. 69.2015, S. 24-26

Publikationslink

Analysis of casting materials under thermal fatigue

Altenbach, Holm; Laengler, Frank; Naumenko, Konstantin; Ievdokymov, Mykola

In: Applied mechanics and materials: AMM - [S.l.]: Scientific.Net, Bd. 784.2015, S. 95-103

Publikationslink

A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory

Eisenträger, J.; Naumenko, Konstantin; Altenbach, Holm; Meenen, J.

In: Composite structures: an international journal - Amsterdam: Elsevier, Bd. 133.2015, S. 265-277

Publikationslink

Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band

Altenbach, Holm; Naumenko, Konstantin; Lvov, G.; Sukiasov, V.; Podgorny, A.

In: Mechanics of composite materials - Dordrecht [u.a.]: Springer Science + Business Media B.V, 1965, Bd. 51.2015, 2, S. 139-156

Publikationslink

Experimental identification of flow properties of a S355 structural steel for hot deformation processes

Schmicker, David; Paczulla, Stefan; Nitzschke, Steffen; Groschopp, Sven; Naumenko, Konstantin; Jüttner, Sven; Strackeljan, Jens

In: The journal of strain analysis for engineering design - London : Sage Publ., Bd. 50 (2015), Heft 2, S. 75-83

Publikationslink

Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading

Ozhoga-Maslovskaja, Oksana; Naumenko, Konstantin; Altenbach, Holm; Prygorniev, Oleksandr

In: Computational materials science. - Amsterdam [u.a.] : Elsevier Science; Vol. 96.2015, Part A, S. 178-184

Publikationslink

Statistical analysis of stress and deformation state in polycrystalline aggregates with a large number of grains

Prygorniev, Oleksandr; Naumenko, Konstantin

In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015, VII, 117 S., Ill., graph. Darst.

Constitutive models for creep-damage behavior at quasi-static and cyclic loading

Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin

In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity '14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08

Homogenisation approach in analysis of creep behaviour in multipass weld

Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm

In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53

Publikationslink

A layer-wise theory for laminated glass and photovoltaic panels

Naumenko, Konstantin; Eremeyev, Victor A.

In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 112.2014, S. 283-291

Publikationslink

A phase mixture model for anisotropic creep of forged AlCuMgSi alloy

Naumenko, Konstantin; Gariboldi, Elisabetta

In: Materials science and engineering / A. - Amsterdam : Elsevier, Bd. 618.2014, S. 368-376

Publikationslink

Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff

Altenbach, Holm; Beschetnikov, Dmitriy A.; Lvov, Gennadiy I.; Naumenko, Konstantin; Sukiasov, Vladimir G.

In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67

Publikationslink

A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading

Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola

In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428

Publikationslink

Analysis of laminates for photovoltaic appliacations

Naumenko, Konstantin; Weps, Matthias; Eremeyev, Victor; Altenbach, Holm

In: 8th German-Greek-Polish Symposium on recent advances in mechanics. - Univ. of Bremen, S. 59-60, 2013Kongress: German-Greek-Polish Symposium on recent advances mechanics; 8 (Goslar) : 2013.09.09-13

A material model for describing the anomalous ratcheting effect of advanced chromium steels

Kutschke, Andreas; Naumenko, Konstantin; Altenbach, Holm

In: CanCNSM 2013. - Montréal, insges. 2 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

Robust methods for creep fatigue analysis of power plant components under cyclic transient thermal loading

Kostenko, Yevgen; Almstedt, Henning; Naumenko, Konstantin; Linn, Stefan; Scholz, Alfred

In: Proceedings of the ASME Turbo Expo 2013, Volume 5B: Oil and gas applications; steam turbines . - New York, N.Y : ASME, insges. 8 S.

Publikationslink

Ein robuster Ansatz zur Simulation des kontinuierlich angetriebenen Rotationsreibschweißprozesses

Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens

In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 9 S., 2013Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26

Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich

Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang

In: Effizienz, Präzision, Qualität - 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU: 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU - Magdeburg: Univ., 2013, Paper B2-5, insgesamt 10 S.Kongress: Magdeburger Maschinenbau-Tage 11 (Magdeburg : 2013.09.25-26)

A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model

Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens

In: Computer methods in applied mechanics and engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 265.2013, S. 186-194

Publikationslink

Modeling creep damage of an aluminumsilicon eutectic alloy

Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin

In: International journal of damage mechanics. - Lancaster, Pa : Technomic Publ, Bd. 22.2013, 5, S. 683-698

Publikationslink

Unsymmetric three-layer laminate with soft core for photovoltaic modules

Weps, Matthias; Naumenko, Konstantin; Altenbach, Holm

In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339

Publikationslink

Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen

Eisenträger, Joahanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang

In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80

Publikationslink

Micro-macro analysis of creep and damage behavior of multi-pass welds

Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm

In: Problemy mašinostroenija. - Kiev : Izd. "Naukova Dumka", Bd. 16.2013, 1, S. 31-38

Surface layer effects in polycrystalline structures under cyclic viscoplasticity

Prygorniev, Oleksandr; Naumenko, Konstantin

In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers

Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola

In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]

A holistic approach on the simulation of rotary-friction-welding

Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens

In: The 7th Asia-Pacific International IIW Congress. - Singapore, insges. 6 S., 2013Kongress: Asia-Pacific International IIW Congress on Recent Development in Welding and Joining Technologies; 7 (Singapore) : 2013.07.08-10[vollständiger Beitrag auf CD-ROM]

Modeling creep ratcheting of an aluminum-silicon eutectic alloy

Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin

In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31

Creep fatigue analysis of power plant components under transient thermal loading

Kutschke, Andreas; Linn, Stefan; Naumenko, Konstantin; Scholz, Alfred

In: Creep and fracture of engineering materials and structures. - the Japan Inst. of Metals, insges. 4 S., 2012Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11); 12 (Kyoto, Japan) : 2012.05.27-31

Creep deformation characteristics of Al-rich Ti-Al alloys

Sturm, Daniel; Heilmaier, Martin; Naumenko, Konstantin; Kozhar, Sergii; Krüger, Manja

In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012 . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)

Analysis of laminated glass beams for photovoltaic applications

Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Altenbach, Holm

In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036

Publikationslink

Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature

Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas

In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208

Publikationslink

Multi-axial thermo-mechanical analysis of power plant components from 9–12% Cr steels at high temperature

Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten

In: Engineering Fracture Mechanics

Multi-axial thermo-mechanical analysis of power plant components from 9-12% Cr steels at high temperature

Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten

In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668

Publikationslink

Multi-axial thermo-mechanical analysis of power plant components from 912% Cr steels at high temperature

Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten

In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668

Publikationslink

A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature

Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas

In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597

Publikationslink

Conservation laws and prediction methods for stress concentration fields

Altenbach, Holm; Eremeyev, Victor A.; Kutschke, Andreas; Naumenko, Konstantin

In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355

Publikationslink

A variationally consistent derivation of microcontinuum theories

Meenen, Johannes; Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin

In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)

Publikationslink

Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications

Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Girchenko, Anna; Altenbach, Holm

In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)

Publikationslink

Stress range dependent creep and damage - experimentel observations and their phenomenological description

Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin

In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 55-57

Modelling of low cycle fatigue for an aluminum alloy at elevated temperature

Altenbach, Holm; Naumenko, Konstantin; Kozhar, Sergii

In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 22-24

Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results

Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin

In: Mechanics of composite materials. - New York, NY : Faraday Press, Bd. 45.2009, 3, S. 249-256

Creep analysis of power plant components from 1% CRMOV and 10% CRMOV steels

Kostenko, Y.; Schwass, G.; Naumenko, Konstantin

In: OMMI. - Leatherhead, Surrey : European Technology Development, Bd. 6.2009, 2, S. 1-10

Publikationslink

Structural analysis of a power plant component using a stress-range-dependent creep-damage constitutive model

Naumenko, Konstantin; Kostenko, Y

In: Materials science & engineering. - Amsterdam [u.a.] : ElsevierMaterials science and engineering / A, Bd. 510/511.2009, S. 169-174

Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov

Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin

In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne, Bd. 45.2009, 3, S. 367-378

Creep analysis with a stress range dependent constitutive model

Naumenko, Konstantin; Altenbach, Holm; Gorash, Yevgen

In: Archive of applied mechanics. - Berlin : Springer, Bd. 79.2009, S. 619-630

Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis

Altenbach, Holm; Brigadnov, Igor A.; Naumenko, Konstantin

In: Zeitschrift für angewandte Mathematik und Mechanik. - Weinheim : Wiley-VCH, Bd. 89.2009, 10, S. 823-832

Creep analysis for a wide stress range based on stress relaxation experiments

Altenbach, Holm; Naumenko, Konstantin; Gorash, Yevgen

In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008. - Singapore [u.a.] : World Scientific, S. 41-46, 2009

Modeling of stress range dependent creep and damage for the structural analysis

Naumenko, Konstantin; Altenbach, Holm

In: Creep & fracture in high temperature components. - Lancaster, Pa. : DEStech Publ., S. 974-984, 2009

Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile

Sukiasov, Vladimir; Altenbach, Holm; Naumenko, Konstantin

In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 72.2008, S. 183-191

Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges

Altenbach, Holm; Gorash, Yevgen; Naumenko, Konstantin

In: Acta mechanica. - Wien : Springer, Bd. 195.2008, S. 263-274

Numerische Zeitstandanalyse einer Kraftwerkskomponente mit einem Kriechschädigungs-Werkstoffmodell

Kostenko, Yevgen; Naumenko, Konstantin

In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. - Düsseldorf : VDEh, S. 37-46, 2008

Fiber rotation motion in homogeneous flows

Altenbach, Holm; Naumenko, Konstantin; Renner, Barbara

In: Micro-macro-interactions. - Berlin [u.a.] : Springer, S. 133-142, 2008

Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows

Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergeii; Renner, Barbara

In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 87 (2007), Heft 2, S. 81-93

Numerical benchmarks for creep-damage modeling

Altenbach, Holm; Naumenko, Konstantin; Gorash, Yegvgen

In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 7 (2007), S. 4040021-4040022

Publikationslink

Modeling of creep for structural analysis - with 5 tables

Naumenko, Konstantin; Altenbach, Holm

In: New York: Springer, 2007, Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications, XII, 220 S. - (Foundations of engineering mechanics), ISBN: 978-3-540-70834-6 [Literaturverz. S. 199 - 214]

Publikationslink

Long term creep analysis of pipe bends in a steam transfer line at elevated temperature

Altenbach, Holm; Naumenko, Konstantin

In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2 - Stafa-Zürich [u.a.] : Trans Tech Publ. . - 2007, S. 795-802

Ausrichtung von Partikeln in stationären Strömungsfeldern

Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara

In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 6 (2006), S. 423-424

Publikationslink

A note on transversely-isotropic invariants

Altenbach, Holm; Naumenko, Konstantin

In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 86 (2006), Heft 2, S. 162-168

Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen

Radusch, Hans-Joachim; Kies, Torsten; Altenbach, Holm; Naumenko, Konstantin

In: Zeitschrift Kunststofftechnik - München : Hanser, Bd. 2 (2006), Heft 6, S. 1-21

Publikationslink

Steady-state creep analysis of pressurized pipe weldments by perturbation method

Shutov, A. V.; Altenbach, Holm; Naumenko, Konstantin

In: International journal of solids and structures - New York, NY [u.a.] : Elsevier, Bd. 43 (2006), S. 6908-6920

On the free particle rotation in a polymer melt

Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara

In: Strojnícky časopis - Bratislava : [Verlag nicht ermittelbar], Bd. 57 (2006), Heft 2, S. 112-126

Modeling of high-temperature creep for structural analysis applications

Naumenko, Konstantin

In: Halle Univ., FB Ingenieurwiss., Habil.-Schr., 2006, Online-Ressource, Text + Image

Publikationslink

Power plant component design using creep-damage analysis

Altenbach, Holm; Naumenko, Konstantin

In: Proceedings of 2006 ASME International Mechanical Engineering Congress & Exposition - New York : ASME, S. 1-10

Creep modeling and long term structural analysis of plates and shells

Altenbach, Holm; Naumenko, Konstantin

In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity & viscoplasticity, and metal forming ; proceedings of Plasticity '06, the Twelfth International Symposium on Plasticity and its Current Applications - Fulton, Md. : NEAT Press . - 2006, S. 580-582

Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva

Altenbach, Holm; Naumenko, Konstantin

In: Vestnik Nacional'nogo Techniceskogo Universiteta "ChPI". - Char'kov : Univ., 2005, S. 57-66

On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics

Altenbach, Holm; Naumenko, Konstantin

In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339

A phenomenological model for anisotropic creep in a multipass weld metal

Naumenko, Konstantin; Altenbach, Holm

In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819

Numerical treatment of finite rotation for a cylindrical particle

Renner, Barbara; Altenbach, Holm; Naumenko, Konstantin

In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161

Modelling of anisotropic creep in a multi-pass weld metal

Altenbach, Holm; Naumenko, Konstantin

In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387

A direct approach to the formulation of constitutive equations for rods and shells

Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.

In: Shell structures. - London [u.a.] : Taylor & Francis, 2005, S. 87-90

Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten

Naumenko, Konstantin; Altenbach, Holm

In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228

Edge effects in moderately thick plates under creep damage conditions

Altenbach, Johannes; Altenbach, Holm; Naumenko, Konstantin

In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263

Shell and solid type finite element analysis of creep in thin-walled structures

Naumenko, Konstantin; Altenbach, Holm

In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176

Boundary layer in a moderately thick plates under creep-damage conditions

Altenbach, Holm; Naumenko, Konstantin

In: Proceedings of the 2004 International Conference on Computational & Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov

Altenbach, Holm; Naumenko, Konstantin

In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352

Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung

Altenbach, Holm; Dyogtyev, Oleksandr; Naumenko, Konstantin

In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213

Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics

Altenbach, Holm; Naumenko, Konstantin

In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234

A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions

Altenbach, Holm; Naumenko, Konstantin

In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570

On the predictions of fiber orientation and elastic properties of injection molded-walled parts

Altenbach, Holm; Naumenko, Konstantin

In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21

A micro-polar theory for binary media with application to flow of fiber suspensions

Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.

In: Proceedings of the XXX Summer School "Advanced Problems in Mechanics", APM '2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62