Zeitschriften- und Kongressbeiträge (bis 03/2009)
  1. Tsotsas, E., Gogousis, A.: The field of heliostats of a 5 MWe central-tower solar power-plant, (in griechischer Sprache), Proceedings of the first national symposium of the Greek Society for Regenerative Energy Forms, Thessaloniki, Oktober 1982
  2. Tsotsas, E., Schlünder, E.-U.: Der Wärmeübergang durch enge Gasspalte - Ein zentrales Problem bei gekühlten Chipträgern in Hochleistungscomputern, Chem. Eng. Process., 18 (1984), 25-29
  3. Tsotsas, E., Schlünder, E.-U.: Die Kontakttrocknung rieselfähigen, polydispersen Granulats im Vakuum, Chem.-Ing.-Tech., 56 (1984), 844-846
  4. Tsotsas, E., Schlünder, E.-U.: Contact drying of mechanically agitated particulate material in the presence of inert gas, in A. S. Mujumdar (ed.), Drying `86, Proceedings of the 5th Intern. Drying Symposium, Cambridge / Massachusetts, Hemisphere, Washington 1986, vol. 1, sect. III, 157-168
  5. Tsotsas, E., Schlünder, E.-U.: Contact drying of mechanically agitated particulate material in the presence of inert gas, Chem. Eng. Process., 20 (1986), 277-285
  6. Tsotsas, E., Schlünder, E.-U.: Vacuum contact drying of free flowing mechanically agitated multigranular packings, Chem. Eng. Process., 20 (1986), 339-349
  7. Tsotsas, E., Schlünder, E.-U.: Contact drying of polydispersed free flowing granular material, in "Current research in heat and mass transfer  -- A Compendium and a Festschrift for Professor A. Ramachadran“, Hemisphere, Washington, 1986, 259-275
  8. Tsotsas, E., Schlünder, E.-U.: Heat transfer through narrow gas gaps: a crucial problem in cooled-chip supports in high-capacity computers, Int. Chem. Engng, 27 (1987), 34-39, (eingeladene englische Übersetzung)
  9. Tsotsas, E., Schlünder, E.-U.: Heat transfer during evaporation and condensation of binary mixtures, Chem. Eng. Process., 21 (1987), 209-215
  10. Tsotsas, E., Schlünder, E.-U.: Vacuum contact drying of mechanically agitated beds: The influence of hygroscopic behaviour on the drying rate curve, Chem. Eng. Process., 21 (1987), 199-208
  11. Tsotsas, E., Martin, H.: Thermal conductivity of packed beds: A review, Chem. Eng. Process., 22 (1987), 19-37
  12. Tsotsas, E., Schlünder, E.-U.: Some remarks on channeling and on radial dispersion in packed beds, Chem. Engng Sci., 43 (1988), 1200-1203
  13. Tsotsas, E., Schlünder, E.-U.: Contact resistance between rigid walls and particles and its importance on modeling heat transfer to fixed, moving, agitated and fluidized beds, Proceedings of the Eurotherm 4, Thermal transfer in composite materials and at solid-solid interface, 28. Juni - 01. Juli 1988, Nancy / France
  14. Tsotsas, E., Schlünder, E.-U.: On axial dispersion in packed beds with fluid flow, Chem. Eng. Process., 24 (1988), 15-31
  15. Tsotsas, E., Schlünder, E.-U.: Strömungsungleichverteilung und axiale Dispersion in Festbetten, Chem.-Ing.-Tech., 61 (1989), 243-246
  16. Tsotsas, E., Martin, H.: Wärmeübertragung zwischen einer Wand und dispersen Gas/Feststoff-Systemen, Chem.-Ing.-Tech., 61 (1989), 677-686
  17. Tsotsas, E., Schlünder, E.-U.: Heat transfer in packed beds with fluid flow: Remarks on the meaning and the calculation of a heat transfer coefficient at the wall, Chem. Engng Sci., 45 (1990), 819-839
  18. Tsotsas, E., Schlünder, E.-U.: The influence of tube to particle diameter ratio on pressure drop in packed tubes: Remarks on a recent paper by Chu and Ng, AIChE J., 36 (1990), 151-154
  19. Tsotsas, E., Schlünder, E.-U.: Measurements of mass transfer between particles and gas in packed tubes at very low tube to particle diameter ratios, Wärme- und Stoffübertragung, 25 (1990), 245-256
  20. Tsotsas, E., Schlünder, E.-U.: Numerical calculation of the thermal conductivity of two regular bidispersed beds of spherical particles,  Computers Chem. Engng, 14 (1990), 1031-1038
  21. Tsotsas, E.: Eine einfache empirische Gleichung zur Vorausberechung der Porosität polydisperser Kugelschüttungen, Chem.-Ing.-Tech., 63 (1991), 495-496
  22. Tsotsas, E., Schlünder, E.-U.: Impact of particle size dispersity on thermal conductivity of packed beds: Measurement, numerical simulation, prediction, Chem. Eng. Technol., 14 (1991), 421-427
  23. Tsotsas, E., Martin, H.: Heat transfer between a wall and gas-solid dispersed systems, Int. Chem. Engng, 31 (1991), 629-641, (eingeladene englische Übersetzung)
  24. Tsotsas, E.: Physiologische Aspekte der Wärmeübertragung, Fridericiana / Zeitschrift der Universität Karlsruhe, Heft 46 (1992), 35-43
  25. Tsotsas, E.: Transportvorgänge in Festbetten: Geschichte, Standpunkt und Perspektiven der Forschung, Chem.-Ing.-Tech., 64 (1992), 313-322
  26. Tsotsas, E.: On mass transfer, dispersion, and macroscopical flow maldistribution in packed tubes, Chem. Eng. Process., 31 (1992), 181-190
  27. Tsotsas, E.: Measurement and modelling of intraparticle drying kinetics: A review, in A. S. Mujumdar (ed.) Drying ´92, Proceedings of the 8th Intern. Drying Symposium, Montreal/Canada, Elsevier, Amsterdam 1992, 17-41
  28. Tsotsas, E.: Low Péclet number transient heat transfer in packed beds: Reevaluation of the data of Donnadieu, Chem. Engng Sci., 48 (1993), 3434-3437
  29. Tsotsas, E., Schlünder, E.-U.: Comment on studies on axial dispersion in fixed beds, Chem. Eng. Process., 33 (1994), 107-111
  30. Tsotsas, E.: From single particle to fluid bed drying kinetics, Drying Technology, 12 (1994), 1401-1426
  31. Tsotsas, E.: Discrimination of fluid bed models and investigation of particle-to-gas mass transfer by means of drying experiments, Chem. Eng. Process., 33 (1994), 237-245
  32. Tsotsas, E.: Wärmeübertragung in Festbetten, Preprints der Vortrags- und Diskussionstagung „Fortschritte in der Technik der Wärmeübertragung“, GVC-W, Baden-Baden, 29./30. Nov. 1994, Paper 11
  33. Tsotsas, E., Bellgardt, D.: Practical and theoretical aspects of fluid bed drying, Proc. Int. Symp. of Engng Foundation „Fluidization VIII“,  Tours/France, 1995, 1043-1050, als ausgewählter Beitrag auch in: Fluidization VIII, Large, J.-F., Laguérie, C. (eds), Engineering Foundation, New York, 1996, S. 519-526
  34. Groenewold, H., Tsotsas, E.: A new model for fluid bed drying, in C. Strumillo, Z. Pakowski (eds), Drying ´96, Proceedings of the 10th Intern. Drying Symposium, Krakow/Poland, Drukarnia Papaj, Lodz 1996, 315-322,  als ausgewählter Beitrag auch in Drying Technology, 15 (1997), 1687-1698
  35. Hirschmann, C., Tsotsas, E.: Einfluß der Porenstruktur auf den Stofftransport am Beispiel der Trocknung, Freiberger Forschungshefte, A849 (1998), 74-83
  36. Burgschweiger, J., Tsotsas, E.: A population balance model for fluidized bed drying, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 134-141
  37. Hirschmann, C., Tsotsas, E.: Impact of pore structure on particle-side drying kinetics, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 216-223
  38. Hirschmann, C., Fyhr, C., Tsotsas, E., Kemp, I.C.: Comparison of two basic methods for measuring drying curves: Thin layer method and drying channel, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 224-231
  39. Groenewold, H., Tsotsas, E.: Predicting Sherwood numbers in fluidized beds, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 192-199, als ausgewählter Beitrag auch in Drying Technology, 17 (1999), 1557-1570
  40. Groenewold, H., Tsotsas, E.: Heat transfer from a surface to wet fluidized particles during drying, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 184-191
  41. Tsotsas, E.: Achievements, challenges and perspectives in modelling and design of convective dryers, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 11-22
  42. Burgschweiger, J., Groenewold, H., Hirschmann, C., Tsotsas, E.: From hygroscopic single particle to batch fluidized bed drying kinetics, Can. J. Chem. Eng., 77 (1999), 333-341
  43. Winterberg, M., Tsotsas, E.: Das Nußelt-Graetz-Problem für gepackte Rohre, Transactions of the Tambov Technical University, 5 (1999), 68-82
  44. Burgschweiger, J., Wu, Y., Tsotsas, E., Döschner, C.: A process model for fluidized bed drying and its application for design and control, Proceedings of the 2nd European Congress of Chemical Engineering, Montpellier/Frankreich, Récents Progrès en Génie des Procédés, 13 (1999), No. 69, 153-160
  45. Winterberg, M., Krischke, A., Tsotsas, E., Vortmeyer, D.: On the invariability of transport parameters in packed beds upon catalytic reaction, Proceedings of the 2nd European Congress of Chemical Engineering, Montpellier/Frankreich, Récents Progrès en Génie des Procédés, 13 (1999), No. 65, 205-212
  46. Tsotsas, E.: Energetic optimization and product quality enhancement in solids processing: A dilemma?, Proceedings of the 6th Greek Conference of the Solar Technology Institute on the Optimization of Energy Processes, 03.-05. Nov. 1999, Volos/Greece (eingeladener Übersichtsbeitrag)
  47. Burgschweiger, J., Tsotsas, E.: Ein neues, schnelles Meßverfahren für Sorptionsisothermen - Anwendung auf Aktivtonerde, Chem.-Ing.-Tech., 72 (2000) 1 + 2, 88-94
  48. Winterberg, M., Tsotsas, E. , Krischke, A., Vortmeyer, D.: A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes packed with spheres, Chem. Engng Sci., 55 (2000), 967-979
  49. Winterberg, M., Tsotsas, E.: Impact of tube-to-particle diameter ratio on pressure drop in packed beds, AIChE J., vol. 46 (2000), 1084-1088
  50. Winterberg, M., Tsotsas, E.: Modelling of heat transport in beds packed with spherical particles for various bed geometries and / or thermal boundary conditions, Int. J. Thermal Sci., 39 (2000), 556-570
  51. Tsotsas, E., Groenewold, H., Groenewold, C., Burgschweiger, J.: Static and dynamic models for drying in bubbling fluidized beds,  Proceedings of the 3rd European Conference on Fluidization, Toulouse/Frankreich, Récents Progrès en Génie des Procédés, 14 (2000), No. 75, 113-120
  52. Groenewold, H., Tsotsas, E.: Wall-to-bed heat transfer during fluidized bed drying, Proceedings of the 3rd European Conference on Fluidization, Toulouse/Frankreich, Récents Progrès en Génie des Procédés, 14 (2000), No. 75, 205-212
  53. Groenewold, H., Hirschmann, C., Burgschweiger, J., Tsotsas, E.: Comparison of convective drying kinetics of active and inactivated Al2O3,  Bulletin of the Polish Academy of Sciences, 48 (2000), No. 2, 369-382
  54. Groenewold, C., Möser, C., Groenewold, H., Tsotsas, E.: Determination of single particle drying kinetics in an acoustic levitator, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 58, als ausgewählter Beitrag auch in Chem. Eng. J., 86 (2002), 217-222
  55. Kaiser, S., Tsotsas, E.: Advoidance of fouling from dryer exhaust gases as a presupposition for efficient energy recovery – An experimental approach, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 55
  56. Groenewold, C., Groenewold, H., Tsotsas, E.: Interrelations between porous structure and convective drying kinetics in theory and experiment, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 59
  57. Groenewold, H., Tsotsas, E.: Experimental investigation and modelling of the influence of indirect heating on fluidized bed drying, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 39, als ausgewählter Beitrag auch in Drying Technology, 19 (2001), 1739-1754
  58. Schneider, M., Tsotsas, E.: Migration of residual moisture during the storage of particulates after drying, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 360
  59. Möser, C., Tsotsas, E.: Thermal effects during the desorption of ammonia from single drops, in E.W.P. Hahne, W. Heidemann, K. Spindler (eds), Proceedings of the 3rd European Thermal Sciences Conference, Heidelberg, Edizioni ETS, Pisa 2000, 1217-1222
  60. Post, S., Tsotsas, E.: Combined heat transfer, mass transfer and interface convection during evaporation of binary mixtures from planar gaps, in E.W.P. Hahne, W. Heidemann, K. Spindler (eds), Proceedings of the 3rd European Thermal Sciences Conference, Heidelberg, Edizioni ETS, Pisa 2000, 911-916
  61. Tsotsas, E.: Entwicklungsstand und Perspektiven der Modellierung von Transportvorgängen in durchströmten Festbetten, Chem.-Ing.-Tech., (72), 4, 2000, 313-321
  62. Winterberg, M., Tsotsas, E.: Correlations for effective transport coefficients in beds packed with cylindrical particles, Chem. Engng Sci., 55 (2000), 5937-5943
  63. Tsotsas, E.: Letter to the editor on „Experimental determination of transverse mixing kinetics in a rolling drum by image analysis“ by D.R. van Puyvelde, B.R. Young, M.A. Wilson and S.J. Smith (Powder Technology, 106 (1999), 183-191), Powder Technology, 114 (2001), 262-263
  64. Kemp, I.C., Fyhr, B.C., Laurent, S., Roques, M., Groenewold, C., Tsotsas, E., Sereno, A., Bonazzi, C., Bimbenet, J., Kind, M.: Methods for processing experimental drying kinetics data, Drying Technology, 19 (2001), 15-34
  65. Möser, C., Tsotsas, E.: Removal of ammonia from single water drops at normal and reduced pressure, Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg,  2001, Paper No. 459
  66. Beißner, H., Tsotsas, E.: Miscible displacement and diffusion during the removal of undesired liquids from porous bodies by washing,  Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg, 2001, Paper No. 436
  67. Post, S., Urukova, I., Tsotsas, E.: Microconvection during pervaporation of binary liquid mixture from planar gaps or packed layers,  Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg, 2001, Paper No. 446
  68. Kaiser, S., Tsotsas, E.: Formation of fouling layers and energy recovery from dryer exhaust gases, in O. Alvares-Filho, T.M. Eikerik, I. Strommen (eds), Proceedings of the 1st Nordic Drying Conference, Trondheim/Norway, 2001, Paper No. 16
  69. Schneider, M. Tsotsas, E.: On the predictability of silo rain: Modeling moisture migration in beds of particulates after drying, in O. Alvares-Filho, T.M. Eikerik, I. Strommen (eds), Proceedings of the 1st Nordic Drying Conference, Trondheim/Norway, 2001, Paper No. 15
  70. Groenewold, H., Tsotsas, E.: Experimental investigation of heat transfer from a cylinder to fluidized particles with a latent heat sink, in G.P. Celata, P. Di Marco, A. Goulas, A. Mariani (eds), Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki/Greece, Edizioni ETS, Pisa 2001, 1717-1722
  71. Kaiser, S., Antonijevic, D., Tsotsas, E.: Formation of fouling layers on a heat exchanger element exposed to warm, humid and solids loaded air streams, in G.P. Celata, P. Di Marco, A. Goulas, A. Mariani (eds), Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki/Greece, Edizioni ETS, Pisa 2001, 777-782, als ausgewählter Beitrag auch in Exper. Thermal and Fluid Sci., 26 (2002), 291-297
  72. Möser, C., Groenewold, C., Groenewold, H., Tsotsas, E.: Untersuchung der Kinetik von Trennprozessen im akustischen Levitator: Vor- und Nachteile, Chem.-Ing.-Tech., 73 (2001), 1012-1017
  73. Post, S., Tsotsas, E.: Analyse und Quantifizierung von während und aufgrund der Stoffübertragung eines binären Gemisches durch senkrechte Spalte induzierter Mikrokonvektion, Chem.-Ing.-Tech., 73 (2001), 1310-1314
  74. Tsotsas, E., Groenewold, H.: Combined convective and contact drying in fluidized beds, in C.W. Cao, X.D. Liu, Y.K. Pan, Y.X. Ou (eds), Proceedings of the 13th Intern. Drying Symposium, Beijing / China, 2002, Vol. A, 524-531
  75. Burgschweiger, J., Tsotsas, E.: Experimental investigation and modelling of continuous fluidized bed drying under steady-state and dynamic conditions, Chem. Engng Sci., 57 (2002), 5021-5038
  76. Tsotsas, E.: Product quality in drying – luck, trial, experience or science?, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 76
  77. Peglow, M., Heinrich, S., Tsotsas, E., Mörl, L.: A generic model for investigating the influence of dispersion on fluidized bed evaporation and drying, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 33
  78. Kache, G., Tsotsas, E., Evripidis, I.: Calculation of product temperature by short-cut tools for convective dryer design, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 78
  79. Tsotsas, E.: Moderne Prozeß- und Produktgestaltung am Beispiel der Trocknung, Magdeburger Wissenschaftsjournal, 1,2 / 2003, 63-70
  80. Tsotsas, E.: Industrial convective drying: A unit operation on the way to process systems and product engineering, Proceedings of the European Drying Symposium (EU Drying 03), 2003, Kreta/ Griechenland, 15-27
  81. Stakic, M., Tsotsas, E.: Optimization of operational regimes for cross-flow grain dryers, Proceedings of the European Drying Symposium (EU Drying 03), 2003, Kreta/ Griechenland, 241-251
  82. Urukova, I., Post, S., Tsotsas, E.: Enhancement of mass transfer by microconvection during the evaporation of binary mixtures from porous layers, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-7.1-012
  83. Kwapinski, W., Winterberg, M., Tsotsas, E.: Influence of flow maldistribution on packed bed adsorber performance, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-5.5-007
  84. Silalahi, S.H.D., Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Numerical and experimental investigation of heat transfer in the wall of membrane reactors, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. O-5.2-004
  85. Hamel, C., Joshi, M., Tsotsas, E., Seidel-Morgenstern, A.: Aspects of describing stagewise dosing of reactants into fixed-bed and membrane reactors using 2D models, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-7.2-049
  86. Heinrich, S., Peglow , M., Tsotsas, E., Mörl, L.: On the predictability of fluidized bed evaporation and drying: Analysis of mixing behaviour and transport phenomena, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-8.4-018
  87. Salem, K., Mewes, D., Tsotsas, E.: Near infra-red tomography for concentration measurement of exhausting water vapour of a packed bed adsorber, Proceedings of the 3rd World Congress on Industrial Process Tomography, 2003, Banff/Canada, 199-206
  88. Beißner, H., Tsotsas, E.: Einfluss einer Gas-Flüssig-Grenzfläche auf die Waschkinetik poröser Stoffe bei Mischbarkeit von Beladungs- und Waschflüssigkeit, Transactions of the Tambov Technical University, 10 (2004), 101-113
  89. Kwapinski,W., Tsotsas, E.: Determination of drying or adsorption kinetics and equilibria on single particles by a magnetic suspension balance, Proceedings of the  4th European Thermal Sciences Conference, 2004, Birmingham/Großbritannien
  90. Hussain, A., Silalahi, S.H.D., Tsotsas, E.: Heat transfer in tubular, inorganic membranes, Proceedings of the 4th European Thermal Sciences Conference, 2004, Birmingham/Großbritannien
  91. Heinrich, S., Peglow, M., Tsotsas, E., Mörl, L.: Fluidized bed drying: Influence of dispersion and transport phenomena, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 129-136
  92. Kwapinski, W., Tsotsas, E.: Experimental determination of single-particle kinetics and equilibria for convective drying, desorption or adsorption by a magnetic suspension balance, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. B, 1419-1426
  93. Stakic, M., Tsotsas, E.: Model-based analysis and optimization of convective grain drying process, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 381-388, als ausgewählter Beitrag auch in Drying Technology, 23 (2005), 1895-1908
  94. Metzger, T., Tsotsas, E.: Influence of pore distribution on drying kinetics: A simple capillary model, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 185-192, als ausgewählter Beitrag auch in Drying Technology, 23 (2005), 1797-1809
  95. Stakic, M., Tsotsas, E.: Modeling and numerical analysis of an atypical convective coal drying process, Drying Technology, 22 (2004), 2351-2373
  96. Kwapinski, W., Tsotsas, E.: Determination of kinetics and equilibria for adsorption of water vapour on single particles by a magnetic suspension balance, Chem. Eng. Technol., 27 (2004), 681-686
  97. Kwapinski, W., Winterberg, M., Tsotsas, E, Mewes, D.: Modelling of the wall effect in packed bed adsorption, Chem. Eng. Technol., 27 (2004), 1179-1186
  98. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Tomographic investigation of the influence of wall effects on the breakthrough in a highly loaded packed bed adsorber, Proceedings of AIChE Annual Meeting, Austin/Texas, 2004
  99. Saage, G., Kapinska, M., Tsotsas, E.: Discrete element simulation of the mixing time of granular solids in rotary drums, in Y. Wang (ed.), Proceedings of the XIVth International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM’2004), Seeheim/Germany, 2004
  100. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Tomographic measurement of breakthrough in a packed bed adsorber, Chem. Engng Sci., 60 (2005), 517-522
  101. Tsotsas, E.: Modelling fluidized bed drying, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
  102. Metzger, T., Irawan, A., Tsotsas, E.: Discrete modelling of drying kinetics of porous media, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
  103. Drechsler, J., Peglow, M., Mörl, L., Stakic, M., Tsotsas, E.: Simulation of the steady state behaviour of granulation, agglomeration and drying units in a flow sheet simulation program, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
  104. Irawan, A., Metzger, T., Tsotsas, E.: Pore network modelling of drying: Combination with a boundary layer model to capture the first drying period, Proceedings of the 7th World Congress of Chemical Engineering, Glasgow/Scotland, 2005, P42-033
  105. Metzger, T., Klotchov, A., Vergeldt, F., van As, H., Tsotsas, E.: Magnetic resonance imaging to monitor moisture profiles in a drying nano-porous sphere, Proceedings of the 7th World Congress of Chemical Engineering, Glasgow/Scotland, 2005, C14-004
  106. Saage, G., Kwapinska, M., Tsotsas, E.: An analysis of mixing in rotary drums by means of discrete element method and penetration model, in R. Garcia-Rajo, H.J. Herrmann, S. McNamara (eds), Proceedings of the 5th International Conference on the Micromechanics of Granular Media (“Powders and Grains”), Stuttgart/Germany, A.A. Balkema Publisher, Leiden 2005, Vol. B, 837-840
  107. Metzger, T., Kwapinska, M., Kwapinski, W., Peglow, M., Saage, G., Tsotsas, E.: New modelling and measuring methods in drying science and technology, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
  108. Kwapinski, W., Tsotsas, E.: Characterization of particulate materials in respect to drying, desorption or adsorption in packed bed, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
  109. Kwapinska, M., Saage, G., Tsotsas, E.: On the way from penetration models to discrete element simulations of contact dryers, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
  110. Post, S., Urukova, I., Tsotsas, E.: Interfacial convection during evaporation of binary mixtures from porous obstacles, AIChE J., 51 (2005), 3257-3274
  111. Kwapinska, M., Saage, G., Tsotsas, E.: Mixing of particles in rotary drums: A comparison of discrete element simulations with experimental results and penetration models for thermal processes, Powder Technol., 161 (2006), 69-78
  112. Schlünder, E.-U., Hampel, R., Peglow, M.: Vakuum-Schockgefriertrocknung und Trocknung wasserhaltiger poröser Partikel, Chem.-Ing.-Tech., 77 (2005), 1892-1899
  113. Metzger, T., Irawan, A., Tsotsas, E.: Remarks on the paper “Extension of Hoshen-Kopelman algorithm to non-lattice environments” by A. Al-Futaisi and T.W. Patzek, Physica A 321 (2003) 665-678, Physica A, 363 (2006), 558-560
  114. Peglow, M., Kumar, J., Warnecke, G., Heinrich, S., Tsotsas, E., Mörl, L., Hounslow, M.J.: An improved discretized tracer mass distribution of Hounslow et al., AIChE J., 52 (2006), 1326-1332
  115. Radichkov, R., Müller, T., Kienle A., Heinrich, S., Peglow, M., Mörl, L.: A numerical bifurcation analysis of continuous fluidized bed spray granulation with external product classification, Chem. Eng. Process., 45 (2006), 826-837
  116. Heinrich, S., Peglow, M., Mörl, L., Tsotsas, E.: Wirbelschichtforschung an der Universität Magdeburg, Mitteldeutsche Mitteilungen, 2006, Heft 2, 3-5
  117. Kwapinska, M., Saage, G., Peglow, M., Tsotsas, E.: Discrete modelling of contact heating of particles in rotating drum, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 163d
  118. Kettner, C., Peglow, M., Metzger, T., Tsotsas, E.: Distributed product quality by the example of moisture content of granular materials in a continuous fluidized bed dryer, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 163f
  119. Kumar, J., Peglow, M., Warnecke, G., Heinrich, S., Tsotsas, E., Mörl, L.: Numerical solutions of a two-dimensional population balance equation for aggregation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 155c
  120. Peglow, M., Kumar, J., Heinrich, S., Tsotsas, E., Warnecke, G., Mörl, L.: A novel multi-dimensional population balance model incorporating particle size enlargement and drying behavior for fluidized bed spray granulation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 70bx
  121. Link, J.M., Godlieb, W., Tripp, P. Deen, N.G., Heinrich, S., Peglow, M., Kumar, J., Kuipers, J.A.M., Schönherr, M., Mörl, L.: Comparison of fibre optical measurements and discrete element simulations for the study of granulation in a spouted fluidized bed, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 260a
  122. Radichkov, R., Müller, T., Kienle, A., Heinrich, S., Peglow, M., Mörl, L.: Numerical bifurcation analysis of the nonlinear dynamics in continuous fluidized bed spray granulation systems, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 240e
  123. Hampel, R., Heinrich, S., Mörl, L., Peglow, M.: Modelling and experimental analysis of superheated steam granulation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 70au
  124. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Heat and mass transfer in tubular ceramic membranes for membrane reactors, Int. J. Heat Mass Transfer, 49 (2006), 2239–2253
  125. Peglow, M., Heinrich, S., Tsotsas, E.: Towards a complete population balance model for fluidized bed spray granulation: Simultaneous drying and particle formation, Glatt International Times, 22 (2006), 7-13
  126. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Experimental and theoretical investigation of concentration and temperature profiles in a narrow packed bed adsorber, Chem. Eng. Technol., 29 (2006), 910-915
  127. Kwapinski, W., Tsotsas, E.: Characterization of particulate materials in respect to drying, Drying Technology, 24 (2006), 1083-1092
  128. Tsotsas, E., Kwapinska, M., Saage, G.: Modelling of contact dryers, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 29-43
  129. Surasani, V.K., Metzger, T., Tsotsas, E.: Towards a complete pore network drying model: First steps to include heat transfer, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 125-132
  130. Irawan, A., Metzger, T., Tsotsas, E.: Isothermal drying of pore networks: Influence of friction for different pore structures, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 169-176
  131. Stakic, M., Tsotsas, E., Gai, S., Bauerschäfer, U.: Modelling of microwave aided desorption process within ceramic foams, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 219-226
  132. Peglow, M., Kumar, J., Tsotsas, E., Heinrich, S., Warnecke, G., Mörl, L.: A population balance model for simultaneous drying and agglomeration, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 265-272
  133. Vu, T.H., Metzger, T., Tsotsas, E.: Influence of pore size distribution via effective parameters in a continuous drying model, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 554-560
  134. Kettner, C., Peglow, M., Metzger, T., Tsotsas, E.: Distributed product quality in fluidized bed drying, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. B, 745-750
  135. Suherman, Peglow, M., Tsotsas, E.: Drying kinetics of granular and powdery polymers, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. C, 1867-1874
  136. Link, J.M., Godlieb, W., Deen, N.G., Heinrich, S., Tripp, P., Peglow, M., Kuipers, J.A.M., Schönherr, M., Mörl, L.: Discrete element modeling and fibre optical measurements for fluidized bed spray granulation, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 315-322
  137. Hampel, R., Heinrich, S., Peglow, M., Mörl, L.: Study of superheated steam granulation and drying in fluidized beds, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. B, 649-655
  138. Gai, S., Enke, D., Tsotsas, E.: Selective heating of monolithic foam based catalysts and adsorbents by microwave energy, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 645-646
  139. Hamel, C., Tota, A., Wang, H., Tablet, C., Caro, J., Tsotsas, E.: Modelling and simulation of a membrane reactor for the oxidation of methane with simultaneous steam reforming using O2-selective perowskite hollow fibres, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 724-725
  140. Tota, A., Hamel, C., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Enhancement of intermediate product selectivity in multi-stage reactors – potential and pitfalls, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 738-739
  141. Groenewold, H., Tsotsas, E.: Drying in fluidized beds with immersed heating elements, Chem. Engng Sci., 62 (2007), 481-502
  142. Peglow, M., Kumar, J., Heinrich, S., Warnecke, G., Tsotsas, E., Mörl, L., Wolf, B.: A generic population balance model for simultaneous agglomeration and drying in fluidized beds, Chem. Engng Sci., 62 (2007), 513-532
  143. Metzger, T., Kwapinska, M., Peglow, M., Saage, G., Tsotsas, E.: Modern modelling methods in drying, Transport in Porous Media, 66 (2007), 103-120
  144. Nagaiah, C., Warnecke, G., Heinrich, S., Peglow, M.: Numerical simulation of temperature and concentration distributions in fluidized beds with liquid injection, Chem. Engng Sci., 62 (2007), 1567-1590
  145. Metzger, T., Irawan, A., Tsotsas, E.: Isothermal drying of pore networks: Influence of friction for different pore structures, Drying Technology, 25 (2007), 49-57
  146. Caro, J.,  Caspary, K.J. , Hamel, C.,  Hoting, B., Kölsch, P. Langanke, B., Nassauer, K., Schiestel, T. Schmidt, A., Schomäcker, R., Seidel-Morgenstern, A., Tsotsas, E., Voigt, I., Wang, H., Warsitz, R., Werth, S., Wolf, A.: Catalytic membrane reactors for partial oxidation using perovskite hollow fiber membranes and for partial hydrogenation using a catalytic membranecontactor, Ind. Eng. Chem. Res., 46 (2007), 2286-2294
  147. Testu, A., Didierjean, S., Maillet, D., Moyne, C., Metzger, T., Niass, T. : Thermal dispersion for water or air flow through a bed of glass beads, Int. J. Heat and Mass Transfer, 50 (2007), 1469-1484
  148. Brzic, D., Ahchieva, D., Peglow, M., Heinrich, S.: An experiemental study of the partial oxidation of ethane to ethylene in a shallow fluidized bed reactor, J. Serb. Chem. Soc.,72 (2007), 183-192
  149. Caro, J., Caspary, K.J., Hamel, C., Hoting, B., Kölsch, P., Langanke, B., Nassauer, K., Noack, M., Schiestel, T., Schroeder, M., Byun, Y.C., Seidel-Morgenstern, A., Tsotsas, E., Wang, H., Werth, S.: Perowskit-Hohlfasermembranen für die katalytische Partialoxidation von Methan zu Synthesegas, Chem.-Ing.-Tech., 79 (2007), 831-842
  150. Peglow, M., Kumar, J., Hampel, R., Tsotsas, E., Heinrich, S.: Towards a complete population balance model for fluidized-bed spray agglomeration,Drying Technology, 25 (2007), 1321-1329
  151. Tsotsas, E., Kwapinska, M., Saage, G.: Modeling of contact dryers, Drying Technology 25 (2007), 1377-1391
  152. Hampel, R., Peglow, M., Kumar, J., Tsotsas, E., Heinrich, S.: Study of agglomeration kinetics in fluidized beds referring to the moisture content of particles, Proceedings of the 3rd International Conference on Population Balance Modelling (PBM), 18.-21. September 2007, Québec/Kanada
  153. Peglow, M., Cunäus, U., Kettner, C., Metzger, T., Tsotsas, E.: A population balance approach for continuous fluidized bed dryers, Proceedings of the 3rd International Conference on Population Balance Modelling (PBM), 18.-21. September 2007, Québec/Kanada
  154. Avila-Acevedo, J.G., Tsotsas, E.: Transient natural convection in stored granular media, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 848
  155. Metzger, T., Tsotsas, E.: Viscous stabilization of drying front: three-dimensional pore network simulations, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 1925
  156. Suherman, Peglow, M., Tsotsas, E.: Drying kinetics of granular Nylon-6, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 1937
  157. Surasani, V.K., Metzger, T., Tsotsas, E.: A non-isothermal pore network drying model: Influence of gravity, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 2131
  158. Peglow, M., Cunäus, U., Kettner, C., Metzger, T., Tsotsas, E.: A population balance approach for continuous fluidized bed dryers, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 2215
  159. Hamel, C., Tóta, A., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Experimental and model based analysis of single und multi stage membrane reactors for the oxidation of short-chain hydrocarbons in a pilot scale, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 3386
  160. Hamel, C., Wang, H., Caro, J., Tsotsas, E., Seidel-Morgenstern, A.: Simulation study of membrane supported oxidation of methane with simultaneous steam reforming using O2-selective Perowskite hollow fibres, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 3412
  161. Peglow, M., Kettner, C., Metzger, T., Tsotsas, E.: Ein analytisches Populationsbilanzmodell für die kontinuierliche Wirbelschichttrocknung, Transactions of the Tambov Technical University, 13 (2007), 474-489
  162. Kumar, J., Peglow, M., Warnecke, G., Heinrich, S.: An efficient numerical technique for solving population balance equation involving aggregation, breakage, growth and nucleation, Powder Technology, 179 (2007), 205-228
  163. Hampel, R., Heinrich, S., Peglow, M., Mörl, L.: Modellierung und experimentelle Untersuchung der Wirbelschicht-Sprühgranulation im überhitzten Wasserdampf, Chem.-Ing.-Techn., 79 (2007), 82-90
  164. Metzger, T., Irawan, A., Tsotsas, E.: Influence of pore structure on drying kinetics: a pore network study, AIChE J., 53 (2007), 3029-3041
  165. Kwapinska M., Saage, G., Tsotsas, E.: Continuous versus discrete modelling of heat transfer to agitated beds, Powder Technology, 181 (2008), 331-342
  166. Suherman, Peglow, M., Tsotsas, E.: On the applicability of normalization for drying kinetics, Drying Technology, 26 (2008), 90-96
  167. Avila-Acevedo, J. G., Tsotsas, E.: Transient natural convection and heat transfer during the storage of granular media, Int. J. Heat Mass Transfer, 51 (2008), 3468-3477
  168. Hamel, C., Tota, A., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Analysis of single and multi-stage membrane reactors for the oxidation of short-chain alkanes – Simulation study and pilot scale experiments, Chem. Eng. Res. Des., 86 (2008), 753-764
  169. Metzger, T., Tsotsas, E.: Pore network models for drying, Proceedings of 3rd International Scientific-Technical Conference on Energy-Saving Technologies for Drying and Hygro-Thermal Processing (DHTP), 16.-18. September 2008, Moskau, Vol. 1, 56-62
  170. Surasani, V., Metzger, T., Tsotsas, E.: Influence of heating mode on drying behavior of capillary porous media: pore scale modelling, Chemical Engineering Science, 63 (2008), 5218-5228
  171. Surasani, V., Metzger, T., Tsotsas, E.: Consideration of heat transfer in pore network modelling of convective drying, International Journal of Heat and Mass Transfer, 51 (2008), 2506-2518
  172. Metzger, T., Tsotsas, E.: Viscous stabilization of drying front: three-dimensional pore network simulations, Chemical Engineering Research and Design, 86 (2008), 739-744
  173. Metzger, T., Vorhauer, N., Tsotsas, E.: Use of pore networks for macroscopic modelling of drying, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 242-249
  174. Surasani, V.K., Metzger, T., Tsotsas, E.: Drying simulations of various 3D pore structures by a non-isothermal pore network model, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 356-364
  175. Kharaghani, R., Metzger, T., Tsotsas, E.: Mechanical effects during isothermal drying: A new discrete modelling approach, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 440-448
  176. Cunäus, U., Peglow, M., Tsotsas, E., Metzger, T.: Modelling of continuous fluidized bed drying using a population balance approach, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 456-462
  177. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Monte-Carlo simulation of agglomerate growth in fluidized bed spray drying, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 493-500
  178. Hampel, R., Peglow, M., Tsotsas, E., Heinrich, S.: Study of fluidized bed spray agglomeration focussing the moisture content of the solid, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. B, 1052-1059
Termine
Prüfungseinsicht Transportphänomene
01. November, G15-116, 9-15 Uhr
Review product quality exam
September 27th (wednesday), all day October 17th (tuesday), 8 am until 12 am
Hochschulkurs Trocknungstechnik 2018
19.03. -- 22.03.2018 in Magdeburg
Hochschulkurs Wirbelschichttechnik 2017
06.11 - 09.11.2017 in Hamburg
Einsichtnahme/consultaion TVT/TPE Prüfung/exam
Einsichtnahme Grundlagen und Prozesse der VT
News
Auszeichnung auf Fachtagung
Preis für die beste Präsentation für Christoph Neugebauer auf der Population Balance Modeling Conference 2018.
Virtuelle Rektifikationskolonne
Unternehmen Region
10 Jahre NaWiTec
Unternehmen Region
IPT Pergande GmbH im Portrait
Ehrung für Prof. E. Tsotsas
Honorarprofessur der UCTM, Sofia, an Prof. Tsotsas verliehen
Hochschulkurs Trocknungstechnik 2018
19.03. -- 22.03.2018 in Magdeburg
Hochschulkurs Wirbelschichttechnik 2017
06.11 - 09.11.2017 in Hamburg
Inline-Feuchtemessung in Echtzeit
Innovative Messtechnik aus WIGRATEC+
Unternehmen Region
WIGRATEC+ im Portrait
Auszeichnung auf Fachtagung
Auszeichnung für die beste Forschungsarbeit auf IDS 2016 in Gifu, Japan
WIGRATEC goes international
BMBF fördert Internationalisierung
Auszeichnung auf Fachtagung
Posterpreis für Christian Rieck auf der PARTEC 2016 in Nürnberg
Ehrung für Prof. Lothar Mörl
Ehrenprofessur der Universität Sofia an Prof. Lothar Mörl verliehen
3. FVST Ladies Night for Women in MINT war voller Erfolg
Fachgruppe Trocknungstechnik
Neuberufungen in Beirat 2016
Auszeichnung auf Fachtagung
Preis für die beste Präsentation für Marion Börnhorst auf dem Fachausschuss Trocknungstechnik 2016
Auszeichnung auf Fachtagung
Posterpreis für Vesselin Idakiev auf dem Fachausschuss für Agglomerationstechnik, 2016
Hochschulkurs Wirbelschichttechnik 2016
07.11 -- 10.11.2016 in Hamburg
Auszeichnung auf Fachtagung
Votragspreise bei der Nordic Baltic Drying Conference 2015
ECCE 2015
27.09 - 01.10.2015 in Nizza, Frankreich
Granulation Workshop 2015
01.07. - 03.07.2015 in Sheffield, GB
Hochschulkurs Trocknungstechnik 2016
29.03. -- 01. April 2016 in Magdeburg
Auszeichnung auf Fachtagung
Vortragspreis für Dipl.-Ing. Nicole Vorhauer
Unternehmen Region
Franziska Sondej im Portrait
Unternehmen Region
Andreas Bück spricht über Forschungsprojekt
Vorlesung zum Thema Contracting
Studierende besichtigen GETEC-Anlagen
VDI-Förderpreis für C. Knopf
VDI-Förderpreis des BV Magdeburg für Masterarbeit
Best Poster Award
M.Sc. K. Meyer gewinnt Preis auf der ESCAPE 24
Verlängerung des Graduiertenkolleg 1554
Deutsche Forschungsgemeinschaft bestätigt Graduiertenkolleg an der Otto-von-Guericke-Universität Magdeburg
DFG SPP 1679 Workshop
Jun.-Prof. Bück als Referent
Ministerpräsident Reiner Haseloff zu Gast
Im Fokus stehen aktuelle EU-Forschungsprojekte an der OvGU
25 Deutschlandstipendien vergeben
Über 60 Unternehmen und Privatpersonen fördern Studenten an der OvGU
Fertigstellung einer neuen Wirbelschichtanlage
bei der Pergande Group in Weißandt-Gölzau
Auszeichnung auf Fachtagung
Preis für beste Posterpräsentation an Maryam Dadkhah
IHK-Forschungspreis
Forschungpreis 2013 für Jun.-Prof. A. Bück
Akademischer Festakt 2013
Forschungspreis 2013 der OvGU geht an Prof. Evangelos Tsotsas
Akademischer Festakt 2013
Dissertationspreis 2013 der FVST geht an Jun.-Prof. Andreas Bück
Verfahrenstechnisches Schülerpraktikum
Schüler des Norbertusgymnasiums zu Besuch bei NaWiTec
BMBF bewilligt NaWiTec-Verbundvorhaben
zur Reduktion des Energiebedarfs bei der Partikelformulierung
Stiftungsprofessur für NaWiTec
InnoProfile-Transfer-Vorhaben „Strukturbildende Wirbelschichtprozesse“
Hochschulkurs Trocknungstechnik 2014
Grundlagen und Anwendungen der Trocknungstechnik
Auszeichnung auf Fachtagung
Preis für beste Posterpräsentation an Dipl.-Ing. Philipp Bachmann
Auszeichnung
Nachwuchswissenschaftler erhält "Young Scientist in Drying Award"
WIGRATEC+ bewilligt
BMBF sagt Förderung für drei Jahre zu
Honorar-Professur
Verleihung einer Honorarprofessur an Mirko Peglow
VDI Ehrenring für Jun.-Prof. Mirko Peglow
Auszeichnung für besondere Leistungen auf technisch-wissenschaftlichem Gebiet
Neuer WIGRATEC-Informationsfilm
Informationsfilm zum regionalen Wachstumskern WIGRATEC verfügbar