Zeitschriften- und Kongressbeiträge (ab 03/2009)
  1. Edreva, V., Zhang, F., Mangold, M., Tsotsas, E.: Mass transport in multilayer porous metallic membranes -- diagnosis, identification and validation, Chem. Eng. Technol., 32 (2009), 632-640
  2. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Stochastic simulation of agglomerate formation in fluidized bed spray drying: A micro-scale approach, Chemical Engineering Science, 64 (2009), 2631-2643
  3. Peglow, M., Tsotsas, E.: Discrete and continuous models to describe the kinetics of particle formation in fluidized beds, Proceedings of the 4th Nordic Drying Conference (NDC'09), Reykjavik/Island, 18.--19. Juni 2009
  4. Cunäus, U., Peglow, M., Tsotsas, E., Metzger, T.: Modeling of continuous fluidized bed drying using a population balances approach, Proceedings of the 4th Nordic Drying Conference (NDC'09), Reykjavik/Island, 18.--19. Juni 2009
  5. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Modelling of agglomerate grwoth in fluidized bed spray drying, Proceedings of the 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 24.--06. Juni 2009, Sheffield/UK
  6. Sommer, A., Heinrich, S., Antonyuk, S., Peglow, M., Tsotsas, E.: Influence of process parameters on particle properties during fluidized bed granulation, Proceedings of the 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 24.--06. Juni 2009, Sheffield/UK
  7. Weigler, F., Hoffmann, T., Naumann, M., Peglow, M., Tsotsas, E.: Experimental investigation of temperature distributions in bulk materials, Proceedings of the 7th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics (ExHFT-7), Krakow/Polen, 28. Juni -- 3. Juli 2009, 2034-2046
  8. Iroba, K.L., Weigler, F., Mellmann, J., Metzger, T., Tsotsas, E.: Particle velocity profiles and residence time distribution in mixed-flow grain dryers, Proceedings of 6th International Conference for Conveying and Handling of Particulate Solids (CHoPS) and 10th International Conference on Bulk Materials Storage, Handling & Transportation (ICBMH) 3.--7. August 2009, Brisbane, Queensland/Australia, 79-84
  9. Kharagani, A., Metzger, T., Tsotsas, E.: Pore-scale modeling of drying-induced cracks, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  10. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Modeling of particle growth in fluidized bed spray agglomeration, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  11. Cunäus, U., Peglow, M., Tsotsas, E, Metzger, T.: Modeling of continuous fluidized bed drying using a population balance approach, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  12. Tsotsas, E.: Particle formulation by drying, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  13. Dernedde, M., Hampel, R., Peglow, M., Tsotsas, E.: Determination of agglomeration kinetics in fluidized beds, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  14. Tsotsas, E., Metzger, T., Peglow, M.: Models and tools for product engineering by drying, Proceedings of the 12th Polish Drying Symposium, 14.--16. September 2009, Lodz/Polen, 88-104
  15. Kirsch, C., Metzger, T., Tsotsas, E.: Towards a micro-scale simulation of convective gel drying, Proceedings of the 12th Polish Drying Symposium, 14.--16. September 2009, Lodz/Polen, 223-234
  16. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Influence of volumetric flow rate and temperature on mass transfer in composite ceramic membranes for membrane reactors, Canadian Journal of Pure & Applied Sciences, 3 (2009), 741-749
  17. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Effect of top layer´s material and flow direction on mass transfer through multi-layer ceramic membranes, Canadian Journal of Pure & Applied Sciences, 3 (2009), 993-1000
  18. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Influence of the multilayer nature of a composite membrane on mass transfer,
    Journal of Porous Media, 12 (2009), 749-757
  19. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: General analysis of isobaric diffusion in composite ceramic membranes with inclusion of axial dispersion coefficient, Journal of Porous Media, 12 (2009), 955-966
  20. Surasani, V.K., Metzger, T., Tsotsas, E.: A non-isothermal pore network drying model with gravity effect, Transp. Porous Med., 80 (2009), 431-439
  21. Mangold, M., Bück, A., Hanke-Rauschenbach, R.: Passivity based control of a distributed PEM fuel cell model, Journal of Process Control, 20 (2010), 292-313
  22. Martin, P., Hamel, C., Ordóňez, S., Diez, F.V., Tsotsas, E., Seidel-Morgenstern, A.: Analysis of a fluidized bed membrane reactor for butane partial oxidation to maleic anhydride: 2D modeling, Chemical Engineering Science, 65 (2010), 3538-3548
  23. Mellmann, J., Iroba, K.L., Metzger, T., Tsotsas, E.: DEM-modelling of solids transport in mixed-flow dryers, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  24. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidized bed spray drying: Effect of particle porosity and bed temperature on agglomeration kinetics, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  25. Börner, M., Peglow, M., van Buijtenen, M.S., Deen,m N.G., Tsotsas, E., Kuipers, J.A.M., Heinrich, S.: Residence times in fluidized bed granulation, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  26. Fischer, C., Bück, A., Peglow, M., Tsotsas, E.: Fiber-optical inline measurement of particle size distributions in fluidized bed processes, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  27. Dernedde, M., Bück, A., Peglow, M., Tsotsas, E.: Description of particle formation in fluized beds with a stochastic modelling method,
    Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  28. Peglow, M., Tsotsas, E.: Kinetics of particle formation in fluidized beds: Modeling approaches and experimental methods, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  29. Cunäus, U., Tsotsas, E., Peglow, M., Metzger, T.: Modelling of fluidized bed drying using population balance equations, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  30. Hoffmann, T., Peglow, M., Tsotsas, E.: Dynamic behaviour of particle-size distribution in fluidized bed granulation, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  31. Bück, A., Peglow, M., Tsotsas, E., Kienle, A.: Model-based measurement of PSDs in granulation processes, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  32. Surasani, V., Metzger, T., Tsotsas, E.: Drying simulations of various 3D pore structures by a nonisothermal pore network model, Drying Technology 28 (2010), 615-623
  33. Metzger, T., Tsotsas, E.: Network models for capillary porous media: application to drying technology, Chem.-Ing.-Tech., 82 (2010), 869-879
  34. Avila-Acevedo, J.G., Tsotsas, E.: Moisture migration in stored granular materials, Proceedings of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy, 313-318
  35. Vorhauer, N., Metzger, T., Tsotsas, E.: Drying of porous media: A comparison of discrete and continuous models, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
  36. Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network modeling of mechanical effects during drying, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
  37. Kirsch, C., Metzger, T., Tsotsas, E.: Modeling and simulation of convective drying of gels, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
  38. Weigler, F., Peglow, M., Tsotsas, E.: Discrete investigation of thermal relaxation in packed beds, Proceedings (CD-ROM) of 14th International Heat Transfer Conference (IHTC14), 08.-13. August 2010, Washington/USA
  39. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement and control of particulate processes: an application to granulation processes, Proceedings (CD-ROM) of 19th International Congress of Chemical and Process Engineering (CHISA2010) and 7th European Congress of Chemical Engineering (ECCE-7), 28. August - 1. September 2010, Prag/Czech Republic
  40. Vorhauer, N., Metzger, T., Tsotsas, E.: Empirical macroscopic model for drying of porous media based on pore networks and scaling theory, Drying Technology, 28 (2010), 991-1000
  41. Kwapinski, W., Salem, K., Mewes, D., Tsotsas, E.: Thermal and flow effects during adsorption in conventional, diluted and annular packed beds, Chem. Eng. Sci., 68 (2010), 4250-4260
  42. Bück, A., Peglow, M., Naumann, M., Tsotsas, E.: Mathematical modelling and simulation of drying of a droplet with suspended particles, Proceedings of the 4th International Conference on Population Balance Modelling, 15.-17. September 2010, Berlin, 99-110
  43. Dernedde, M., Peglow, M., Tsotsas, E.: Probabilistic modeling of particle formation in fluidized bed spray granulation, Proceedings of the 4th International Conference on Population Balance Modelling, 15.-17. September 2010, Berlin, 99-110
  44. Kharaghani, A., Metzger, T., Tsotsas, E.: An irregular pore network model for convective drying of aggregates capillary and micro-mechanical effects, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 132-140
  45. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Experimental and theoretical investigation of drying effects on fluidized bed wet agglomeration, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 318-324
  46. Weigler, F., Peglow, M., Tsotsas, E.: Advances in discrete modeling of heat transfer in contact drying equipment, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 325-330
  47. Kirsch, C., Metzger, T., Tsotsas, E.: Micro-scale model for drying of highly porous particle aggregates, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 407-414
  48. Vorhauer, N., Metzger, T., Tsotsas, E.: Extraction of effective parameters for continuous drying model from discrete pore network model, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 415-422
  49. Cunäus, U., Peglow, M., Tsotsas, E.: Application of population balance equations for continuous fluidized bed drying, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 499-505
  50. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement and control of granulation processes, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 659-665
  51. Hoffmann, T., Peglow, M., Tsotsas, E.: Investigation of process dynamics in fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 666-671
  52. Fischer, C., Bück, A., Peglow, M., Tsotsas, E.: Fibre-optical inline measurements of particle size distributions in fluidized bed processes, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 672-679
  53. Dernedde, M., Peglow, M., Tsotsas, E: Stochastic modeling of fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1120-1127
  54. Börner, M., Peglow, M., Tsotsas, E.: Particle residence times in fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1128-1134
  55. Naumann, M., Tsotsas, E., Peglow, M., Bück, A., Marchisio, D. L.: Modeling of particle formation from a single droplet containing micro or nano particles, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1172-1177
  56. Mellmann, J., Iroba, K. L., Möller, B., Metzger, T., Tsotsas, E.: Moisture content and residence time distributions in mixed-flow grain dryers, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1995-2002
  57. Hoffmann, T., Hailu, B. A., Peglow, M., Tsotsas, E., Jacob, M.: Particle-gas mass transfer in a spouted bed with adjustable air inlet,
    Drying Technol., 29 (2011), 257-265
  58. Iroba, K.L., Mellmann, J., Weigler, F., Metzger, T., Tsotsas, E.: Particle velocity profiles and residence time distribution in mixed-flow grain dryers, Granular Matter, 13 (2011), 159-168
  59. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement of particle size distributions in layering granulation processes, AIChE J., 57 (2011), 929-941
  60. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastische Modellierung der Partikelbildung in Wirbelschichten, Chem.-Ing.-Tech., 83 (2011), 665-671
  61. Hoffmann, T., Peglow, M., Tsotsas, E.: Prozessdynamik der Wirbelschichtgranulierung, Chem.-Ing.-Tech., 83 (2011), 658-664
  62. Peglow, M., Cunäus, U., Tsotsas, E.: An analytical solution population balance equations for continuous fluidized bed drying, Chem. Eng. Sci., 66 (2011), 1916-1922
  63. Börner, M., Peglow, M., Tsotsas, E.: Particle residence times in fluidized bed granulation equipments, Chem. Eng. Technol., 34 (2011), 1116-1122
  64. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidized bed granulation: Influence of droplet pre-drying, Chem. Eng. Technol.; 34 (2011), 1172-1176
  65. Tsotsas, E.: Food drying as a challenge between process efficiency and product quality, Proceedings of the 11th International Congress on Engineering and Food (ICEF11), 22.-26. Mai 2011, Athens/Greece, Paper No. FPD1204
  66. Chávez-Montes, E., Peglow, M., Hampel, R., Mariano, J., Filliol, C., Gumy, J.-C.: An eye from industry on recent advances in fluid bed agglomeration of beverage powders, Proceedings of the 11th International Congress on Engineering and Food (ICEF11), 22.-26. Mai 2011, Athens/Greece, Paper No. FPE298
  67. Kharaghani, R., Metzger, T., Tsotsas, E.: A proposal for discrete modeling of mechanical effects during drying, combining pore networks with DEM, AIChE J., 57 (2011), 872-885
  68. Bück, A., Peglow, M., Tsotsas, E.: Model-based measurement and control of fluidised bed layering granulation processes, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 28
  69. Ivanova, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating for the pharmaceutical industry, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 33
  70. Wassermann, M., Weinholz, S., Ivanova, N., Cordes, C., Peglow, M., Pergande, W.: Granulation of lactic acid bacteria using fluidized bed technology, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 64
  71. Dernedde, M., Peglow, M., Tsotsas, E.: Simulation of fluidized bed spray agglomeration focussing on the pre-drying of droplets, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 79
  72. Hoffmann, T., Bachmann, P., Peglow, M., Tsotsas, E.: Investigation of growth kinetics in fluidised bed spray granulation, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 80
  73. Börner, M., Peglow, M., Tsotsas, E.: Application of experimental parameters in an extended PBM of a Wurster fluidized bed granulation, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 81
  74. Naumann, M., Peglow, M., Bück, A., Marchisio, D., Tsotsas, E.: Modeling of particle formation from a single nano suspension droplet, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 84
  75. Cháves-Montes, E., Peglow, M., Hampel, R., Mariano, J., Filliol, C., Gumy, J.-C.: Recent advances in fluid bed agglomeration of beverage powders, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 114
  76. Fischer, C., Peglow, M., Tsotsas, E.: Simulation of in-line particle sizing techniques during agglomeration processes, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 116
  77. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Kinetics of fluidized bed spray agglomeration for compact and porous particles, Chem. Eng. Sci., 66 (2011), 1866-1878
  78. Peglow, M., Dernedde, M., Tsotsas, E.: Stochastic simulation of fluidized bed agglomeration, Proceedings of the 5th Nordic Drying Conference, 19.-21. Juni 2011, Helsinki/Finnland
  79. Iroba, K.L., Weigler, F., Mellmann, J., Metzger, T., Tsotsas, E.: Residence time distribution in mixed-flow grain dryers, Drying Technol., 29 (2011), 1252-1266
  80. Fischer, C., Peglow, M., Tsotsas, E.: Restoration of particle size distribution from fiber-optical in-line measurements in fluidized bed processes, Chem. Eng. Sci., 66 (2011), 2842-2852
  81. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network drying model for particle aggregates: Assessment by x-ray microtomography, Proceedings of the 7th Asia-Pacific Drying Conference (ADC2011), 18.-20. September, Tianjin/China
  82. Kharaghani, A., Wang, Y., Kirsch, C., Metzger, T., Tsotsas, E.: Drying of highly porous particle aggregates: Pore-scale simulation and x-ray microtomography, Proceedings of the 7th Asia-Pacific Drying Conference (ADC2011), 18.-20. September, Tianjin/China
  83. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Investigation of the kinetics of fluidized bed spray agglomeration based on stochastic methods, AIChE J., 57 (2011), 3012-3026
  84. Kharaghani, A., Kirsch, C., Metzger, T., Tsotsas, E.: Three-dimensional micro-scale model for convective gel drying,
    Proceedings of the 11th AIChE Annual Meeting, 16.-21. Oktober 2011, Minneapolis/USA
  85. Vorhauer, N., Metzger, T., Tsotsas, E.: On the influence of temperature gradients on drying of pore networks, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
  86. Tsotsas, E.: On the combination of particle formation and drying kinetics, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
  87. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Visualization of liquid in drying particle aggregates by x-ray microtomography and use of pore-scale modelling, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
  88. Surasani, V.K., Kretschmer, F., Heidecke, P., Peglow, M., Tsotsas, E.: Biomass combustion in a fluidized-bed system: An integrated model for dynamic plant simulations, Ind. Eng. Chem. Res., 50 (2011), 9936-9943
  89. Mellmann, J., Iroba, K.L., Metzger, T., Tsotsas, E., Farkas, I.: Moisture content and residence time distributions in mixed-flow grain dryers, Biosystems Engng., 109 (2011), 297-307
  90. Kharaghani, A., Metzger, T., Tsotsas, E.: An irregular pore network model for convective drying and resulting damage of particle aggregates, Chem. Eng. Sci., 75 (2012), 267-278
  91. Vorhauer, N., Metzger, T., Tsotsas, E., Prat, M.: Experimental investigation of drying by pore networks: Influence of pore size distribution and temperature, Proceedings of the 4th International Conference on Porous Media and its Applications in Science and Engineering ICPM4, 17.-22. Juni 2012, Potsdam
  92. Sun, Y., Kharaghani A., Metzger, T., Tsotsas, E., Müller, J..: Investigation of lotion distribution in wet wipes by pore network model and micro computed tomography, Proceedings of the 4th International Conference on Porous Media and its Applications in Science and Engineering ICPM4, 17.-22. Juni 2012, Potsdam
  93. Bück, A.,  Klaunick, G., Kumar, J., Peglow, M., Tsotsas, E.: Numerical simulation of particulate processes for control and estimation by spectral methods, AIChE J., 58 (2012), 2309-2319
  94. Palis, S., Bück, A., Kienle, A.: Low order controller design for continuous fluidized bed spray granulation with internal product classification by robust control methods, Proceedings of the 7th IFAC Symposium on Robust Control Design, 20.-22. Juni 2012, Aalborg/Denmark
  95. Tsotsas, E.: Influence of drying kinetics on particle formation: A personal perspective, Drying Technol., 30 (2012), 1167-1175
  96. Prat, M.,  Veran-Tissoires, S., Vorhauer, N., Metzger, T., Tsotsas, E.: Fractal phase distribution and drying: Impact on two-phase zone scaling and drying time scale dependence, Drying Technol., 30 (2012), 1129-1135
  97. Tsotsas, E., Pakowski, Z., Kudra, T., Devahastin, S.: Guest editorial: Special issue to commemorate 30 years of Drying Technology, Drying Technol., 30 (2012), 1125-1126
  98. Dadkhah, M., Peglow, M., Tsotsas, E.: Characterization of the internal morphology of agglomerates produced in a spray fluidized bed by X-ray tomography, Powder Technol., 228 (2012), 349-358
  99. Narni, N.R., Warnecke, G., Kumar, J., Peglow, M., Heinrich, S.: Some modelling aspects of aggregation kernels and the Aggregation Population Balance Equations, Proceedings of the International Conference on Eco-friendly Computing and Communication Systems (ICECCS), 9.-11. August 2012, Cochin, Kerala/Indien, 319-326
  100. Dadkhah, M., Peglow, M., Tsotsas, E.: Morphological characterization of spray fluidized bed agglomerates by using X-ray m-computed tomography, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro composite structures, 18.-20. Juni 2012, Torino/Italy
  101. Mezhericher, M., Naumann, M., Peglow, M., Levy, A., Tsotsas, E., Borde, I.: Continuous species transport and population balance models for first drying stage of nanosuspension droplets, Chem. Eng. J., 210 (2012), 120-135
  102. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network drying model for particle aggregates: Assessment by X-ray microtomography, Drying Technol., 30 (2012), 1800-1809
  103. Hoffmann, T., Peglow, M., Tsotsas, E.: Influence of process parameters on the particle surface structure in fluidized bed spray granulation, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  104. Hampel, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating in a Wurster fluidized bed process, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  105. Kharaghani, A., Kirsch, C., Tsotsas, E.: Influence of wetting properties on drying behavior of highly porous particle aggregates, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  106. Sun, Y., Kharaghani, A., Tsotsas, E.: Modeling droplet evolution on a porous particle as micro-scale process in fluidized bed spray drying, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  107. Wang, Y., Kharaghani, A., Tsotsas, E.: Pore-scale comparison of liquid distributions between pore network drying simulations and X-ray tomography, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  108. Dadkhah, M., Peglow, M., Tsotsas, E.: Morphological characterization of fluidized bed spray drying agglomerates by X-ray tomography, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  109. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modeling of fluid bed agglomeration: Determination of particle moisture content, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  110. Hussain, M., Peglow, M., Tsotsas, E.: Modeling the effect of process parameters in aggregation kernel of PBE using Monte-Carlo simulations, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  111. Kharaghani, A., Anyamene, D., Tsotsas, E.: Direct imaging of convective drying process for single and dual cells of two-dimensional particle packings, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  112. Bachmann, P., Peglow, M., Tsotsas, E.: Population balance modelling of moisture content distributions in semi-batch fluidized bed drying, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  113. Dernedde, M., Peglow, E. Tsotsas, E.: A novel, structure-tracking monte carlo algorithm for spray fluidized bed agglomeration, AIChE J., 58 (2012), 3016-3029
  114. Bück, A., Peglow, M., Naumann, M., Tsotsas, E.: Population balance model for drying of droplets containing aggregating nanoparticles, AIChE J., 58 (2012), 3318-3328
  115. Hampel, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating in a Wurster fluidized bed process, Chem. Eng. Sci., 86 (2013), 87-98
  116. Kharaghani, A., Kirsch, C., Metzger, T., Tsotsas, E.: Micro-scale fluid model for drying of highly porous particle aggregates, Comp. Chem. Eng., 52 (2013), 46-54
  117. Börner, M., Peglow, M., Tsotsas, E.: Atomization characteristic into a top-spray fluidised bed obtained by an experimental and DEM-CFD approach, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  118. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidised bed spray agglomeration focussing on the structure of particles, Proceedings of the International Congress on Particle Technology, PARTEC, 23.- 25. April 2013, Nürnberg
  119. Hoffmann, T., Peglow, M., Tsotsas, E.: Particle formation in fluidized bed spray granulation, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  120. Bück, A., Peglow, M., Tsotsas, E.: Control of particle properties in fluidised bed granulation processes, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  121. Kretschmer, F., Lemin, B., Bück, A., Peglow, M., Tsotsas, E.: Kinetic analysis of biomass combustion in fluidized beds, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  122. Kharaghani, A., Kirsch, C., Tsotsas, E.: Discrete three-dimensional model for drying particle aggregates, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  123. Vorhauer, N., Tran, Q. T., Metzger, T., Tsotsas, E., Prat, M.: Experimental investigation of drying in a model porous medium: Influence of thermal gradients, Drying Technol., 31 (2013), 920-929
  124. Börner, M., Peglow, M., Tsotsas, E.: Derivation of  parameters for a two compartment population balance model of Wurster fluidised bed granulation, Powder Technol., 238 (2013), 122-131
  125. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Simulating the spray fluidized bed granulation by modelling the aggregation efficiency, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  126. Bück, A., Palis, S., Tsotsas, E.: Based control of particle properties in fluidised bed spray granulation, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  127. Dadkhah, M., Peglow, M., Tsotsas, E.: Influence of process variables on particle morphology in spray fluidized bed agglomeration, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  128. Börner, M., Tsotsas, E.: Spray zone demarcation in top-spray fluidised bed granulation by droplet detection methods, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  129. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Modeling spray fluidized bed aggregation kinetics on the basis of Monte-Carlo simulation results, Chem. Eng. Sci., 101 (2013), 35-45
  130. Nagaiah, C., Kumar, N.S., Bück, A., Warnecke, G.: Parallel and high resolution numerical solution of concentration and temperature distribution in fluidized beds, Comp. Chem. Eng., 52 (2013), 122-133
  131. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Population balance modeling of  influencing parameters in spray fluidized bed granulation, Proceedings of the 5th International Conference on Population Balance Modeling, 11.-13. September 2013, Bangalore/Indien
  132. Bück, A., Hampel, N., Peglow, M., Tsotsas, E.:  Product control in pharmaceutical coating by population balance  modelling, Proceedings of the 5th International Conference on Population Balance Modeling, 11.-13. September 2013, Bangalore/Indien
  133. Wang, Y.J., Kharaghani, A., Tsotsas, E.: Pore-scale visualization and simulation of liquid films for drying particle packing, Proceedings of EuroDrying 2013, 02.-04. Oktober 2013, Paris/Frankreich
  134. Scaar, H., Franke, G., Weigler, F., Delele, M., Tsotsas, E., Mellmann, J.: Experimental study of the airflow distribution during mixed-flow grain drying, Proceedings of EuroDrying 2013, 02.-04. Oktober 2013, Paris/Frankreich
  135. Gadiel, C., Meininghaus, R., Quoll, M., Tsotsas, E.: Emissionen von Automobillackieranlagen – Ökobilanzielle Betrachtung der thermischen Nachverbrennung im Unterbodenschutz, Chem.-Ing.-Techn., 85 (2013), 1632-1637
  136. Dernedde, M., Peglow, M., Tsotsas, E: Stochastic modeling of fluidized bed agglomeration: Determination of particle moisture content,
    Drying Technol., 31 (2013), 1764-1771
  137. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: On two-compartment population balance modelling of spray fluidized bed agglomeration, Computers and Chemical Engineering, 61 (2014), 185-202
  138. Bück, A., Tsotsas, E.: Modellbasierte Regelung der Partikelgrößenverteilung in der kontinuierlichen Wirbelschicht-Sprühgranulation,
    Chem.-Ing.-Techn., 86 (2014), 725-733
  139. Hagemeier, T., Glöckner, H., Roloff, C., Thévenin, D., Tomas, J.: Simulation of multi-stage particle classification in a zig-zag apparatus,
    Chem. Eng. Technol., 37 (2014), 879-887
  140. Hussain, M., Peglow, M., Tsotsas, E., Kumar, J.: Modeling of aggregation kernel using Monte Carlo simulations of spray fluidized bed agglomeration, AIChE J., 60 (2014), 855-868
  141. Dadkhah, M., Tsotsas, E.: Influence of process variables on internal particle structure in spray fluidized bed agglomeration,  Powder Technol., 258 (2014), 165-173
  142. Meyer, K., Bück, A., Tsotsas, E.: Dynamic modelling of particle formulation in horizontal fluidized beds, Proceedings of the 24th  European Symposium on Computer Aided Process Engineering, ESCAPE 24, 15.-18. Juni 2014, Budapest/Ungarn
  143. Narni, N.R., Peglow, M., Warnecke, G., Kumar, J., Heinrich, S., Kuipers, J.A.M.: Modeling of aggregation kernels for fluidized beds using discrete particle model simulations, Particuology 13 (2014), 134-144
Termine
Prüfungseinsicht Transportphänomene
01. November, G15-116, 9-15 Uhr
Review product quality exam
September 27th (wednesday), all day October 17th (tuesday), 8 am until 12 am
Hochschulkurs Trocknungstechnik 2019
25.03. -- 28.03.2019 in Magdeburg
Hochschulkurs Wirbelschichttechnik 2017
06.11 - 09.11.2017 in Hamburg
Einsichtnahme/consultaion TVT/TPE Prüfung/exam
Einsichtnahme Grundlagen und Prozesse der VT
News
Arun S. Mujumdar Medal for Prof. E. Tsotsas
Auszeichnung auf Fachtagung
Preis für die beste Präsentation für Christoph Neugebauer auf der Population Balance Modeling Conference 2018.
Virtuelle Rektifikationskolonne
Unternehmen Region
10 Jahre NaWiTec
Unternehmen Region
IPT Pergande GmbH im Portrait
Ehrung für Prof. E. Tsotsas
Honorarprofessur der UCTM, Sofia, an Prof. Tsotsas verliehen
Hochschulkurs Trocknungstechnik 2018
19.03. -- 22.03.2018 in Magdeburg
Hochschulkurs Wirbelschichttechnik 2017
06.11 - 09.11.2017 in Hamburg
Inline-Feuchtemessung in Echtzeit
Innovative Messtechnik aus WIGRATEC+
Unternehmen Region
WIGRATEC+ im Portrait
Auszeichnung auf Fachtagung
Auszeichnung für die beste Forschungsarbeit auf IDS 2016 in Gifu, Japan
WIGRATEC goes international
BMBF fördert Internationalisierung
Auszeichnung auf Fachtagung
Posterpreis für Christian Rieck auf der PARTEC 2016 in Nürnberg
Ehrung für Prof. Lothar Mörl
Ehrenprofessur der Universität Sofia an Prof. Lothar Mörl verliehen
3. FVST Ladies Night for Women in MINT war voller Erfolg
Fachgruppe Trocknungstechnik
Neuberufungen in Beirat 2016
Auszeichnung auf Fachtagung
Preis für die beste Präsentation für Marion Börnhorst auf dem Fachausschuss Trocknungstechnik 2016
Auszeichnung auf Fachtagung
Posterpreis für Vesselin Idakiev auf dem Fachausschuss für Agglomerationstechnik, 2016
Hochschulkurs Wirbelschichttechnik 2016
07.11 -- 10.11.2016 in Hamburg
Auszeichnung auf Fachtagung
Votragspreise bei der Nordic Baltic Drying Conference 2015
ECCE 2015
27.09 - 01.10.2015 in Nizza, Frankreich
Granulation Workshop 2015
01.07. - 03.07.2015 in Sheffield, GB
Hochschulkurs Trocknungstechnik 2016
29.03. -- 01. April 2016 in Magdeburg
Auszeichnung auf Fachtagung
Vortragspreis für Dipl.-Ing. Nicole Vorhauer
Unternehmen Region
Franziska Sondej im Portrait
Unternehmen Region
Andreas Bück spricht über Forschungsprojekt
Vorlesung zum Thema Contracting
Studierende besichtigen GETEC-Anlagen
VDI-Förderpreis für C. Knopf
VDI-Förderpreis des BV Magdeburg für Masterarbeit
Best Poster Award
M.Sc. K. Meyer gewinnt Preis auf der ESCAPE 24
Verlängerung des Graduiertenkolleg 1554
Deutsche Forschungsgemeinschaft bestätigt Graduiertenkolleg an der Otto-von-Guericke-Universität Magdeburg
DFG SPP 1679 Workshop
Jun.-Prof. Bück als Referent
Ministerpräsident Reiner Haseloff zu Gast
Im Fokus stehen aktuelle EU-Forschungsprojekte an der OvGU
25 Deutschlandstipendien vergeben
Über 60 Unternehmen und Privatpersonen fördern Studenten an der OvGU
Fertigstellung einer neuen Wirbelschichtanlage
bei der Pergande Group in Weißandt-Gölzau
Auszeichnung auf Fachtagung
Preis für beste Posterpräsentation an Maryam Dadkhah
IHK-Forschungspreis
Forschungpreis 2013 für Jun.-Prof. A. Bück
Akademischer Festakt 2013
Forschungspreis 2013 der OvGU geht an Prof. Evangelos Tsotsas
Akademischer Festakt 2013
Dissertationspreis 2013 der FVST geht an Jun.-Prof. Andreas Bück
Verfahrenstechnisches Schülerpraktikum
Schüler des Norbertusgymnasiums zu Besuch bei NaWiTec
BMBF bewilligt NaWiTec-Verbundvorhaben
zur Reduktion des Energiebedarfs bei der Partikelformulierung
Stiftungsprofessur für NaWiTec
InnoProfile-Transfer-Vorhaben „Strukturbildende Wirbelschichtprozesse“
Hochschulkurs Trocknungstechnik 2014
Grundlagen und Anwendungen der Trocknungstechnik
Auszeichnung auf Fachtagung
Preis für beste Posterpräsentation an Dipl.-Ing. Philipp Bachmann
Auszeichnung
Nachwuchswissenschaftler erhält "Young Scientist in Drying Award"
WIGRATEC+ bewilligt
BMBF sagt Förderung für drei Jahre zu
Honorar-Professur
Verleihung einer Honorarprofessur an Mirko Peglow
VDI Ehrenring für Jun.-Prof. Mirko Peglow
Auszeichnung für besondere Leistungen auf technisch-wissenschaftlichem Gebiet
Neuer WIGRATEC-Informationsfilm
Informationsfilm zum regionalen Wachstumskern WIGRATEC verfügbar